Difference between revisions of "Getting started"

From Openembedded.org
Jump to: navigation, search
(Ubuntu)
(Change link to layer index)
Line 43: Line 43:
 
* [http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html Yocto Project]
 
* [http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html Yocto Project]
  
More can be found on the [[LayerIndex]] page under ''Distribution Layers'' (see links in the far right hand column).
+
More can be found in the [http://layers.openembedded.org layer index] (click on ''Layers'', then click on ''Filter Layers'' on the right hand side and make it so ''Distribution'' is the only ticked item.)
  
 
=== Alternative methods ===
 
=== Alternative methods ===
  
 
* [[oe-made-easy]]
 
* [[oe-made-easy]]

Revision as of 08:53, 10 April 2013

Required software

Before being able to build you will need to install a fairly short list of required software on your host system.

Note: for a headless (i.e. non-graphical / server) machine you can skip installing SDL and xterm, these are optional; however without SDL you will not be able to run graphical OS images within QEMU.

(Lists below borrowed from the Yocto Project Quick Start guide.)

Ubuntu

sudo apt-get install gawk wget git-core diffstat unzip texinfo build-essential chrpath libsdl1.2-dev xterm

Fedora

sudo yum install gawk make wget tar bzip2 gzip python unzip perl patch diffutils diffstat git cpp gcc gcc-c++ \
 eglibc-devel texinfo chrpath ccache SDL-devel xterm

openSUSE

sudo zypper install python gcc gcc-c++ git chrpath make wget diffstat texinfo python-curses libSDL-devel xterm

CentOS

sudo yum install gawk make wget tar bzip2 gzip python unzip perl patch diffutils diffstat git \
 cpp gcc gcc-c++ glibc-devel texinfo chrpath SDL-devel xterm

Setup Instructions

At this point you have a number of different alternatives:

Standalone OE-Core setup

As OE-Core can be used to build working images entirely on its own, you can get started with it immediately.

See OE-Core Standalone Setup for instructions.

Systems based upon OE-Core

There are a number of other systems that make use of the OE-Core metadata which provide their own set of setup instructions. Here are some links to "getting started" information for these:

More can be found in the layer index (click on Layers, then click on Filter Layers on the right hand side and make it so Distribution is the only ticked item.)

Alternative methods