[bitbake-devel] [PATCH 1/2] V4 Disk space monitoring
Robert Yang
liezhi.yang at windriver.com
Mon Feb 20 09:53:55 UTC 2012
Monitor disk availability and take action when the free disk space or
amount of free inode is running low, it is enabled when BB_DISKMON_DIRS
is set.
* Variable meanings(from meta-yocto/conf/local.conf.sample):
# Set the directories to monitor for disk usage, if more than one
# directories are mounted in the same device, then only one directory
# would be monitored since the monitor is based on the device.
# The format are: "directory,minimum space,minimum free inode",
# either space or inode (Or both of them) should be specified, otherwise
# the monitor would not be enabled, the unit can be G, M, K or none,
# but do NOT use GB, MB or KB (B is not needed).
#BB_DISKMON_DIRS = "${TMPDIR},1G,1K ${SSTATE_DIR},500M,1K"
#
# Set the action when the space is running low, the action is one of:
# ABORT: Immediately abort
# NO_NEW_TASK: no new tasks
# WARN: show warnings
# The default is WARN
#BB_DISKMON_ACTION = "WARN"
#
# Set disk space and inode interval, the unit can be G, M, or K, but do
# NOT use the GB, MB or KB (B is not needed), the format is:
# "disk space interval, disk inode interval", the default value is
# "10M, 50" which means that it would warn when the free space is
# lower than the minimum space(or inode), and would repeat the action
# when the disk space reduces 10M (or the amount of inode reduces 50)
# again.
#BB_DISKMON_INTERVAL = "10M,10K"
[YOCTO #1589]
Signed-off-by: Robert Yang <liezhi.yang at windriver.com>
---
bitbake/bin/bitbake | 1 +
bitbake/lib/bb/monitordisk.py | 177 +++++++++++++++++++++++++++++++++++++++++
bitbake/lib/bb/runqueue.py | 67 +++++++++++++++-
3 files changed, 242 insertions(+), 3 deletions(-)
create mode 100644 bitbake/lib/bb/monitordisk.py
diff --git a/bitbake/bin/bitbake b/bitbake/bin/bitbake
index 6da4980..d295229 100755
--- a/bitbake/bin/bitbake
+++ b/bitbake/bin/bitbake
@@ -240,6 +240,7 @@ Default BBFILES are the .bb files in the current directory.""")
else:
print("server address: %s, server port: %s" % (server.serverinfo.host, server.serverinfo.port))
+
return 1
if __name__ == "__main__":
diff --git a/bitbake/lib/bb/monitordisk.py b/bitbake/lib/bb/monitordisk.py
new file mode 100644
index 0000000..2ea7bdb
--- /dev/null
+++ b/bitbake/lib/bb/monitordisk.py
@@ -0,0 +1,177 @@
+#!/usr/bin/env python
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+#
+# Copyright (C) 2012 Robert Yang
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import time, os, logging, re, sys
+import bb
+logger = logging.getLogger("BitBake.Monitor")
+
+def errRet(info):
+ logger.error("%s" % info)
+ logger.error("Disk space monitor will NOT be enabled")
+ return None
+
+def errRetTwo(info):
+ logger.error("%s" % info)
+ logger.error("Disk space monitor will NOT be enabled")
+ return None, None
+
+def convertGMK(unit):
+
+ """ Convert the space unit G, M, K, the unit is case-insensitive """
+
+ unitG = re.match('([1-9][0-9]*)[gG]\s?$', unit)
+ if unitG:
+ return int(unitG.group(1)) * (1024 ** 3)
+ unitM = re.match('([1-9][0-9]*)[mM]\s?$', unit)
+ if unitM:
+ return int(unitM.group(1)) * (1024 ** 2)
+ unitK = re.match('([1-9][0-9]*)[kK]\s?$', unit)
+ if unitK:
+ return int(unitK.group(1)) * 1024
+ unitN = re.match('([1-9][0-9]*)\s?$', unit)
+ if unitN:
+ return int(unitN.group(1))
+ else:
+ return None
+
+def getMountedDev(path):
+
+ """ Get the device mounted at the path, uses /proc/mounts """
+
+ # Get the mount point of the filesystem containing path
+ # st_dev is the ID of device containing file
+ parentDev = os.stat(path).st_dev
+ currentDev = parentDev
+ # When the current directory's device is different from the
+ # parrent's, then the current directory is a mount point
+ while parentDev == currentDev:
+ mountPoint = path
+ # Use dirname to get the parrent's directory
+ path = os.path.dirname(path)
+ # Reach the "/"
+ if path == mountPoint:
+ break
+ parentDev= os.stat(path).st_dev
+
+ try:
+ with open("/proc/mounts", "r") as ifp:
+ for line in ifp:
+ procLines = line.rstrip('\n').split()
+ if procLines[1] == mountPoint:
+ return procLines[0]
+ except EnvironmentError:
+ pass
+ return None
+
+def getDiskData(BBDirs, configuration):
+
+ """Prepare disk data for disk space monitor"""
+
+ # Save the device IDs, need the ID to be unique (the dictionary's key is
+ # unique), so that when more than one directories are located in the same
+ # device, we just monitor it once
+ devDict = {}
+ for pathSpaceInode in BBDirs.split():
+ # The input format is: "dir,space,inode", dir is a must, space
+ # and inode are optional
+ pathSpaceInodeRe = re.match('([^,]*),([^,]*),?(.*)', pathSpaceInode)
+ if not pathSpaceInodeRe:
+ errRet("Invalid value in BB_DISKMON_DIRS: %s" % pathSpaceInode)
+ path = os.path.realpath(pathSpaceInodeRe.group(1))
+ if not path:
+ errRet("Invalid path value in BB_DISKMON_DIRS: %s" % pathSpaceInode)
+ minSpace = pathSpaceInodeRe.group(2)
+ # The disk space or inode is optional, but it should have a correct
+ # value once it is specified
+ if minSpace:
+ minSpace = convertGMK(minSpace)
+ if not minSpace:
+ errRet("Invalid disk space value in BB_DISKMON_DIRS: %s" % pathSpaceInodeRe.group(2))
+ else:
+ # 0 means that it is not specified
+ minSpace = None
+
+ minInode = pathSpaceInodeRe.group(3)
+ if minInode:
+ minInode = convertGMK(minInode)
+ if not minInode:
+ errRet("Invalid inode value in BB_DISKMON_DIRS: %s" % pathSpaceInodeRe.group(3))
+ else:
+ # 0 means that it is not specified
+ minInode = None
+
+ if minSpace is None and minInode is None:
+ errRet("No disk space or inode value in found BB_DISKMON_DIRS: %s" % pathSpaceInode)
+ # mkdir for the directory since it may not exist, for example the
+ # DL_DIR may not exist at the very beginning
+ if not os.path.exists(path):
+ bb.utils.mkdirhier(path)
+ mountedDev = getMountedDev(path)
+ devDict[mountedDev] = path, minSpace, minInode
+ return devDict
+
+def getAction(configuration):
+
+ """ Get the disk space monitor action"""
+
+ action = configuration.getVar("BB_DISKMON_ACTION", 1) or "WARN"
+ if action not in ("ABORT", "NO_NEW_TASK", "WARN"):
+ errRet("Unknown disk space monitor action: %s" % self.action)
+ else:
+ return action
+
+def getInterval(configuration):
+
+ """ Get the disk space interval """
+ interval = configuration.getVar("BB_DISKMON_INTERVAL", 1)
+ if not interval:
+ # The default value is 10M and 50.
+ return 10 * 1024 * 1024, 50
+ else:
+ # The disk space or inode is optional, but it should have a
+ # correct value once it is specified
+ intervalRe = re.match('([^,]*),?\s*(.*)', interval)
+ if intervalRe:
+ intervalSpace = intervalRe.group(1)
+ if intervalSpace:
+ intervalSpace = convertGMK(intervalSpace)
+ if not intervalSpace:
+ errRetTwo("Invalid disk space interval value in BB_DISKMON_INTERVAL: %s" % intervalRe.group(1))
+ intervalInode = intervalRe.group(2)
+ if intervalInode:
+ intervalInode = convertGMK(intervalInode)
+ if not intervalInode:
+ errRetTwo("Invalid disk inode interval value in BB_DISKMON_INTERVAL: %s" % intervalRe.group(2))
+ return intervalSpace, intervalInode
+ else:
+ errRetTwo("Invalid interval value in BB_DISKMON_INTERVAL: %s" % interval)
+
+class diskMonitor:
+
+ """Prepare the disk space monitor data"""
+
+ def __init__(self, BBDirs, configuration):
+ self.enableMonitor = True
+ self.devDict = getDiskData(BBDirs, configuration)
+ self.action = getAction(configuration)
+ self.spaceInterval, self.inodeInterval = getInterval(configuration)
+ if self.devDict is None or self.action is None:
+ self.enableMonitor = False
+ if self.spaceInterval is None and self.inodeInterval is None:
+ self.enableMonitor = False
diff --git a/bitbake/lib/bb/runqueue.py b/bitbake/lib/bb/runqueue.py
index 7bf4320..0b4dcf0 100644
--- a/bitbake/lib/bb/runqueue.py
+++ b/bitbake/lib/bb/runqueue.py
@@ -31,6 +31,7 @@ import fcntl
import logging
import bb
from bb import msg, data, event
+from bb import monitordisk
bblogger = logging.getLogger("BitBake")
logger = logging.getLogger("BitBake.RunQueue")
@@ -771,6 +772,18 @@ class RunQueue:
self.state = runQueuePrepare
+ # For disk space monitor
+ self.diskMonDirs = cfgData.getVar("BB_DISKMON_DIRS", 1) or None
+ if self.diskMonDirs:
+ self.dm = monitordisk.diskMonitor(self.diskMonDirs, cfgData) or None
+ self.preFreeSpace = {}
+ self.preFreeInode = {}
+ for dev in self.dm.devDict:
+ self.preFreeSpace[dev] = 0
+ self.preFreeInode[dev] = 0
+ else:
+ self.dm = None
+
def check_stamps(self):
unchecked = {}
current = []
@@ -923,6 +936,40 @@ class RunQueue:
return iscurrent
+ def disk_monitor_action (self, devDict):
+
+ """ Tack action for the monitor """
+
+ for dev in devDict:
+ st = os.statvfs(devDict[dev][0])
+ # The free space, float point number
+ freeSpace = st.f_bavail * st.f_frsize
+ if devDict[dev][1] is not None and freeSpace < devDict[dev][1]:
+ # Always show warning, and this is the default "WARN" action
+ if self.preFreeSpace[dev] == 0 or self.preFreeSpace[dev] - freeSpace > self.dm.spaceInterval:
+ logger.warn("The free space of %s is running low (%.3fGB left)" % (dev, freeSpace / 1024 / 1024 / 1024.0))
+ self.preFreeSpace[dev] = freeSpace
+ if self.dm.action == "NO_NEW_TASK":
+ logger.warn("No new tasks can be excuted since BB_DISKMON_ACTION = \"NO_NEW_TASK\"!")
+ return 1
+ elif self.dm.action == "ABORT":
+ logger.error("Immediately abort since BB_DISKMON_ACTION = \"ABORT\"!")
+ sys.exit(1)
+ # The free inodes, float point number
+ freeInode = st.f_favail
+ if devDict[dev][2] is not None and freeInode < devDict[dev][2]:
+ # Always show warning, and this is the default "WARN" action
+ if self.preFreeInode[dev] == 0 or self.preFreeInode[dev] - freeInode > self.dm.inodeInterval:
+ logger.warn("The free inode of %s is running low (%.3fK left)" % (dev, freeInode / 1024.0))
+ self.preFreeInode[dev] = freeInode
+ elif self.dm.action == "NO_NEW_TASK":
+ logger.warn("No new tasks can be excuted since BB_DISKMON_ACTION = \"NO_NEW_TASK\"!")
+ return 1
+ elif self.dm.action == "ABORT":
+ logger.error("Immediately abort since BB_DISKMON_ACTION = \"ABORT\"!")
+ sys.exit(1)
+ return 0
+
def execute_runqueue(self):
"""
Run the tasks in a queue prepared by rqdata.prepare()
@@ -946,7 +993,14 @@ class RunQueue:
self.rqexe = RunQueueExecuteScenequeue(self)
if self.state is runQueueSceneRun:
- retval = self.rqexe.execute()
+ if self.dm and self.dm.enableMonitor:
+ dm_action = self.disk_monitor_action(self.dm.devDict)
+ if dm_action == 1:
+ self.rqexe.finish()
+ else:
+ retval = self.rqexe.execute()
+ else:
+ retval = self.rqexe.execute()
if self.state is runQueueRunInit:
logger.info("Executing RunQueue Tasks")
@@ -954,10 +1008,17 @@ class RunQueue:
self.state = runQueueRunning
if self.state is runQueueRunning:
- retval = self.rqexe.execute()
+ if self.dm and self.dm.enableMonitor:
+ dm_action = self.disk_monitor_action(self.dm.devDict)
+ if dm_action == 1:
+ self.rqexe.finish()
+ else:
+ retval = self.rqexe.execute()
+ else:
+ retval = self.rqexe.execute()
if self.state is runQueueCleanUp:
- self.rqexe.finish()
+ self.rqexe.finish()
if self.state is runQueueComplete or self.state is runQueueFailed:
if self.rqexe.stats.failed:
--
1.7.4.1
More information about the bitbake-devel
mailing list