[bitbake-devel] chromium browser
Gary Thomas
gary at mlbassoc.com
Mon Mar 7 11:43:28 UTC 2016
On 2016-03-07 12:05, Khem Raj wrote:
> What is your build machine configuration and look at log.do_cpmpile it might have some info
>
Also note that depending on your linker choice the build can need a lot of RAM and if your
build machine doesn't have enough you'll spend a lot of time swapping. I would suggest that
your build host has at least 4GB RAM to build chromium.
> On Mar 7, 2016 5:57 PM, "Praveenreddy Padamati" <praveenreddy.p at hcl.com <mailto:praveenreddy.p at hcl.com>> wrote:
>
> Hi,
>
> Thanks for the reply. It took more than 24 hours and then we stopped it.
>
> Thanks
> Praveen Reddy P
>
> -----Original Message-----
> From: bitbake-devel-bounces at lists.openembedded.org <mailto:bitbake-devel-bounces at lists.openembedded.org>
> [mailto:bitbake-devel-bounces at lists.openembedded.org <mailto:bitbake-devel-bounces at lists.openembedded.org>] On
> Behalf Of Gary Thomas
> Sent: Monday, March 07, 2016 2:42 PM
> To: bitbake-devel at lists.openembedded.org <mailto:bitbake-devel at lists.openembedded.org>
> Subject: Re: [bitbake-devel] chromium browser
>
> On 2016-03-07 09:30, Praveenreddy Padamati wrote:
> > Hi,
> >
> > When I added chromium browser in yocto build configuration then bitbake is stucking at do compile. Can you please
> help me?
> >
>
> How long have you waited? Depending on your target and host/build settings, building chromium can take a LONG time
> (measured in hours)
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the bitbake-devel
mailing list