[bitbake-devel] Question about the error of do_compile and oe_runmake failed in bitbake

[Khem Raj]

In batctl-2017.1 recipe file you are missing
Inherit pkgconfig

On Mon, Jul 24, 2017 at 6:49 AM Choi Paul <cws7777 at hotmail.com> wrote:

> Hi,
>
> This is  Paul Choi who is  a beginner of yocto image building and having a
> hard time on error(shown in attached figure) when I build image by typing
> 'bitbake piflo' (piflo is the name of image)
>
> Originally, I was using batman-adv-2016.4.bb and batctl-2016.4.bb and it
> builds well before with typing 'bitbake piflo'.
>
> However, after upgrading batman-adv-2016.4 and batctl-2016.4 to 2017.1, it
> gives me some errors like figure.
>
>
> Here are error messages:
>
>
> ERROR: batctl-2017.1-r0 do_compile: oe_runmake failed
> ERROR: batctl-2017.1-r0 do_compile: Function failed: do_compile (log file
> is located at
> /opt/cws7777/rpi-build/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/batctl/2017.1-r0/temp/log.do_compile.24608)
> ERROR: Logfile of failure stored in:
> /opt/cws7777/rpi-build/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/batctl/2017.1-r0/temp/log.do_compile.24608
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 8 STAGING_INC=
> | Makefile:65: *** pkg-config not found.  Stop.
> | ERROR: oe_runmake failed
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_compile (log file is located at
> /opt/cws7777/rpi-build/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/batctl/2017.1-r0/temp/log.do_compile.24608)
> ERROR: Task
> (/opt/cws7777/meta-piflo/recipes-connectivity/batctl/batctl_2017.1.bb:do_compile)
> failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2553 tasks of which 2552 didn't need to be
> rerun and 1 failed.
>
> Summary: 1 task failed:
>   /opt/cws7777/meta-piflo/recipes-connectivity/batctl/batctl_2017.1.bb:
> do_compile
> Summary: There was 1 WARNING message shown.
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>
>
>
> What did I do wrong..? or any suggestions?
>
>
> Thanks in advance.
>
>
> Best,
>
> Paul Choi
> --
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/bitbake-devel/attachments/20170724/6468d605/attachment-0002.html>