[oe-commits] org.oe.dev merge of '05cc5d66198a3d72159d333ad23069009f5c5cda'
mickeyl commit
openembedded-commits at lists.openembedded.org
Wed Aug 8 12:47:46 UTC 2007
merge of '05cc5d66198a3d72159d333ad23069009f5c5cda'
and '54fa1e3c0521ed472d0150900302a759edeb5c95'
Author: mickeyl at openembedded.org
Branch: org.openembedded.dev
Revision: 66d5fe3b69c07565451811c4984ff62a0b236c46
ViewMTN: http://monotone.openembedded.org/revision.psp?id=66d5fe3b69c07565451811c4984ff62a0b236c46
Files:
1
packages/matchbox2/matchbox-panel-2_svn.bb
packages/openmoko2/openmoko-terminal2_1.0.0.bb
packages/p3scan/files/configure.in-add-newline.patch
classes/seppuku.bbclass
packages/linux/linux-hackndev-2.6/palmtx/defconfig
packages/linux/linux-hackndev-2.6_svn.bb
packages/p3scan/p3scan_2.9.05d.bb
Diffs:
#
# mt diff -r05cc5d66198a3d72159d333ad23069009f5c5cda -r66d5fe3b69c07565451811c4984ff62a0b236c46
#
#
#
# patch "packages/matchbox2/matchbox-panel-2_svn.bb"
# from [280611ffa65d272ecb799b3c5a914b7a059bba7d]
# to [69c5823845ad0202e7e20f19c3702bef97590559]
#
# patch "packages/openmoko2/openmoko-terminal2_1.0.0.bb"
# from [dac523cf78aa60821651434210c00c5eb6511343]
# to [004503598ec2b6d3ed4f81cb2d826000ba15ad1e]
#
============================================================
--- packages/matchbox2/matchbox-panel-2_svn.bb 280611ffa65d272ecb799b3c5a914b7a059bba7d
+++ packages/matchbox2/matchbox-panel-2_svn.bb 69c5823845ad0202e7e20f19c3702bef97590559
@@ -1,10 +1,9 @@ DEPENDS = "gtk+ apmd startup-notificatio
DESCRIPTION = "matchbox-panel-2 is a lightweight dock (system tray) application based on Gtk+"
LICENSE = "GPL"
SECTION = "x11/panels"
DEPENDS = "gtk+ apmd startup-notification"
-
PV = "0.1+svn${SRCDATE}"
-PR = "r6"
+PR = "r7"
SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http"
S = "${WORKDIR}/${PN}"
@@ -24,4 +23,5 @@ FILES_${PN}-applets = "${libdir}/matchbo
PACKAGES += "${PN}-applets"
FILES_${PN}-applets = "${libdir}/matchbox-panel/lib*.so* ${datadir}/*"
+FILES_${PN}-dbg += "${libdir}/matchbox-panel/lib*.a ${libdir}/matchbox-panel/lib*.la"
============================================================
--- packages/openmoko2/openmoko-terminal2_1.0.0.bb dac523cf78aa60821651434210c00c5eb6511343
+++ packages/openmoko2/openmoko-terminal2_1.0.0.bb 004503598ec2b6d3ed4f81cb2d826000ba15ad1e
@@ -1,7 +1,7 @@ RDEPENDS += "mrxvt"
DESCRIPTION = "The OpenMoko Command Line Console"
SECTION = "openmoko/applications"
RDEPENDS += "mrxvt"
-PR = "r0"
+PR = "r1"
inherit openmoko2
@@ -14,3 +14,29 @@ do_install() {
install -m 0644 ${WORKDIR}/openmoko-terminal.png ${D}${datadir}/pixmaps/
install -m 0644 ${WORKDIR}/openmoko-terminal.desktop ${D}${datadir}/applications/
}
+
+pkg_postinst_${PN}() {
+ if [ "x$D" != "x" ]; then
+ exit 1
+ fi
+ echo "adding font defaults to system-wide mrxvtrc..."
+ cat <<EOF >> ${sysconfdir}/mrxvt/mrxvtrc
+#
+# ---------------------------------- FONTS ----------------------------------- #
+#
+Mrxvt.xft: 1
+Mrxvt.xftFont: Bitstream Vera Sans Mono
+Mrxvt.xftSize: 8
+Mrxvt.xftAntialias: 1
+
+# Don't load a multi-char font. This will reduce the line space if your multi
+# char font has different dimensions than the regular font. You might need to
+# comment it out if you want to use XIM and non-english fonts.
+Mrxvt.xftNomFont: 1
+
+# Font to use for tab bar / menus. This need not be mono-spaced ;).
+Mrxvt.xftPFont: Bitstream Vera Sans
+Mrxvt.xftPSize: 8
+EOF
+
+}
#
# mt diff -r54fa1e3c0521ed472d0150900302a759edeb5c95 -r66d5fe3b69c07565451811c4984ff62a0b236c46
#
#
#
# add_file "packages/p3scan/files/configure.in-add-newline.patch"
# content [d85a0e848c2f072859edc2d4ed3896e7089cf873]
#
# patch "classes/seppuku.bbclass"
# from [fb98aeef695eae7972516d4280eb563c9b1efaca]
# to [7aca47c3d82b67562208c0117388a76d2139ecda]
#
# patch "packages/linux/linux-hackndev-2.6/palmtx/defconfig"
# from [5483606dd753ca721bc46ba6b2b4ef24739a2878]
# to [03195d325dd6c207fded62e835101f013daf00f2]
#
# patch "packages/linux/linux-hackndev-2.6_svn.bb"
# from [148cf43784ebfeb5d4fddc91933aac16db7fb859]
# to [1725ff1db30bd8101e2f391992c78f4d0251b1cf]
#
# patch "packages/p3scan/p3scan_2.9.05d.bb"
# from [d8576cf93e4277e8e1f962ffc4bf08fa7cf3eef0]
# to [d16800fce7f242b13af682bd3f5659d757ceb2a8]
#
============================================================
--- packages/p3scan/files/configure.in-add-newline.patch d85a0e848c2f072859edc2d4ed3896e7089cf873
+++ packages/p3scan/files/configure.in-add-newline.patch d85a0e848c2f072859edc2d4ed3896e7089cf873
@@ -0,0 +1,14 @@
+Recent autotools/m4 updates don't like configure.in files without a newline
+at the end. Fix this up.
+
+Index: p3scan-2.9.05d/configure.in
+===================================================================
+--- p3scan-2.9.05d.orig/configure.in 2007-08-08 21:39:49.000000000 +1000
++++ p3scan-2.9.05d/configure.in 2007-08-08 21:39:49.000000000 +1000
+@@ -456,4 +456,4 @@
+ echo "Please consider donating to this project at http://p3scan.sourceforge.net"
+ echo "Mahalo Nui Loa and Enjoy!"
+ echo
+-#EOF
+\ No newline at end of file
++#EOF
============================================================
--- classes/seppuku.bbclass fb98aeef695eae7972516d4280eb563c9b1efaca
+++ classes/seppuku.bbclass 7aca47c3d82b67562208c0117388a76d2139ecda
@@ -346,8 +346,8 @@ python seppuku_eventhandler() {
bug_number = seppuku_file_bug(poster, newbug, product, component, bugname, text)
if not bug_number:
print >> debug_file, "Filing a bugreport failed"
- else:
- print >> debug_file, "The new bug_number: '%s'" % bug_number
+ else:
+ print >> debug_file, "The new bug_number: '%s'" % bug_number
if file:
if not seppuku_create_attachment(debug_file, poster, attach, product, component, bug_number, text, file):
============================================================
--- packages/linux/linux-hackndev-2.6/palmtx/defconfig 5483606dd753ca721bc46ba6b2b4ef24739a2878
+++ packages/linux/linux-hackndev-2.6/palmtx/defconfig 03195d325dd6c207fded62e835101f013daf00f2
@@ -1,11 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-hnd0
-# Wed Mar 28 10:35:44 2007
+# Linux kernel version: 2.6.21-hnd3
+# Wed Aug 8 12:55:12 2007
#
CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -15,6 +18,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -35,6 +39,7 @@ CONFIG_SYSVIPC=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -44,6 +49,7 @@ CONFIG_SYSFS_DEPRECATED=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -122,6 +128,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
@@ -130,6 +137,8 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+# CONFIG_BOARD_IRQ_MAP_BIG is not set
#
# Intel PXA2xx Implementations
@@ -158,6 +167,7 @@ CONFIG_ARCH_PXA=y
# CONFIG_MACH_BLUEANGEL is not set
# CONFIG_MACH_HTCBEETLES is not set
# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
# CONFIG_ARCH_AXIMX3 is not set
# CONFIG_ARCH_AXIMX5 is not set
# CONFIG_MACH_X50 is not set
@@ -171,7 +181,6 @@ CONFIG_MACH_XSCALE_PALMTX=y
# CONFIG_MACH_T3XSCALE is not set
# CONFIG_MACH_XSCALE_PALMTT5 is not set
CONFIG_MACH_XSCALE_PALMTX=y
-# CONFIG_PALMTX_PCMCIA is not set
# CONFIG_PALMTX_DEBUG is not set
CONFIG_PALMTX_BATTERY=m
CONFIG_PALMTX_PM=y
@@ -180,6 +189,9 @@ CONFIG_GPIOEDNG=m
# CONFIG_MACH_ZIRE31 is not set
CONFIG_GPIOED=m
CONFIG_GPIOEDNG=m
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
+# CONFIG_MACH_LOOXC550 is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
@@ -206,20 +218,12 @@ CONFIG_ARM_THUMB=y
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
# CONFIG_ARMBOOT_PROC is not set
CONFIG_XSCALE_PMU=y
-# CONFIG_KEXEC is not set
#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-
-#
# Bus support
#
@@ -246,6 +250,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ALIGNMENT_TRAP=y
#
@@ -255,6 +260,8 @@ CONFIG_CMDLINE="mem=32M"
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_TXTOFFSET_DELTA is not set
#
# CPU Frequency scaling
@@ -287,7 +294,7 @@ CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_DPM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+CONFIG_APM_EMULATION=y
#
# Networking
@@ -304,6 +311,7 @@ CONFIG_XFRM=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -423,6 +431,7 @@ CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_BCM2035UART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
@@ -462,6 +471,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -474,7 +484,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -594,6 +603,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TSDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
#
# Input Device Drivers
@@ -605,9 +615,10 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_GPIO_KEYS is not set
+# CONFIG_GPIODEV_KEYS is not set
+# CONFIG_GPIODEV_DIAGONAL is not set
CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_PALMWK is not set
+# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
@@ -619,9 +630,8 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADC_DEBOUNCE is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_PALMTC is not set
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
@@ -661,6 +671,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PXA_IR is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_RS232_SERIAL is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -676,9 +687,9 @@ CONFIG_HW_RANDOM=m
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-CONFIG_SA1100_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
# CONFIG_RAW_DRIVER is not set
#
@@ -706,6 +717,7 @@ CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
+# CONFIG_SPI_AT25 is not set
#
# Dallas's 1-wire bus
@@ -717,46 +729,55 @@ CONFIG_SPI_PXA2XX=y
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
#
-# Hardware Monitoring - Battery
+# L3 serial bus support
#
-CONFIG_BATTERY_MONITOR=y
-# CONFIG_ADC_BATTERY is not set
+# CONFIG_L3 is not set
#
-# L3 serial bus support
+# Misc devices
#
-# CONFIG_L3 is not set
+# CONFIG_BATTCHARGE_MONITOR is not set
#
-# SoC drivers
+# Multimedia Capabilities Port drivers
#
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_TSC2200 is not set
+# CONFIG_ADC is not set
#
-# Misc devices
+# Compaq/iPAQ Drivers
#
-# CONFIG_BATTCHARGE_MONITOR is not set
#
-# Multimedia Capabilities Port drivers
+# Compaq/HP iPAQ Drivers
#
-# CONFIG_MCP is not set
-# CONFIG_ADC_ADS7846_SSP is not set
-# CONFIG_ADC_AD7877 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_IPAQ_SLEEVE is not set
+# CONFIG_SLEEVE_DEBUG is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+# CONFIG_SOC_T7L66XB is not set
+# CONFIG_SOC_TC6387XB is not set
+# CONFIG_SOC_TC6393XB is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
# LED devices
#
CONFIG_NEW_LEDS=y
@@ -773,6 +794,7 @@ CONFIG_LEDS_TRIGGER_MMC_CARD=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HWTIMER is not set
CONFIG_LEDS_TRIGGER_MMC_CARD=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_SHARED is not set
@@ -793,9 +815,8 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
#
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
-# CONFIG_PXA_CAMERA is not set
+# CONFIG_PXACI is not set
#
# Radio Adapters
@@ -809,15 +830,26 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_PXAPWM is not set
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
@@ -852,12 +884,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CORGI=y
-# CONFIG_BACKLIGHT_PXAPWM is not set
#
# Sound
@@ -912,6 +938,7 @@ CONFIG_HID=y
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
@@ -936,6 +963,7 @@ CONFIG_USB_PXA27X=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
# CONFIG_USB_PXA27X_DMA is not set
+# CONFIG_USB_GADGET_SX2 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
@@ -952,6 +980,7 @@ CONFIG_USB_ETH=m
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
#
# MMC/SD Card support
@@ -960,7 +989,6 @@ CONFIG_MMC_PXA=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
-# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
@@ -982,6 +1010,7 @@ CONFIG_RTC_INTF_DEV=m
#
# RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
@@ -1047,6 +1076,7 @@ CONFIG_RAMFS=y
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_AUFS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -1187,8 +1217,10 @@ CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1202,6 +1234,7 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -1218,4 +1251,5 @@ CONFIG_PLIST=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
-CONFIG_IOMAP_COPY=y
============================================================
--- packages/linux/linux-hackndev-2.6_svn.bb 148cf43784ebfeb5d4fddc91933aac16db7fb859
+++ packages/linux/linux-hackndev-2.6_svn.bb 1725ff1db30bd8101e2f391992c78f4d0251b1cf
@@ -1,8 +1,8 @@ LICENSE = "GPL"
DESCRIPTION = "Hack&Dev's Linux kernel for Palm devices."
HOMEPAGE = "http://www.hackndev.com/"
SECTION = "kernel"
LICENSE = "GPL"
-PR = "r8"
+PR = "r9"
COMPATIBLE_MACHINE = "(palmld|palmtc|palmtt3|palmtt5|palmtx|palmz31|palmz72|palmt650)"
============================================================
--- packages/p3scan/p3scan_2.9.05d.bb d8576cf93e4277e8e1f962ffc4bf08fa7cf3eef0
+++ packages/p3scan/p3scan_2.9.05d.bb d16800fce7f242b13af682bd3f5659d757ceb2a8
@@ -6,11 +6,12 @@ RDEPENDS_${PN} = "${PN}-templates-en"
LICENSE = "GPLv2"
DEPENDS = "gmp bzip2 zlib clamav openssl"
RDEPENDS_${PN} = "${PN}-templates-en"
-PR = "r2"
+PR = "r3"
SRC_URI = "${SOURCEFORGE_MIRROR}/p3scan/p3scan-2.9.05d.tar.gz \
file://libtool-fix.patch;patch=1 \
file://dont-search-use-include.patch;patch=1 \
+ file://configure.in-add-newline.patch;patch=1 \
file://p3scan.init \
file://p3scan.conf \
file://doc.configure.txt \
More information about the Openembedded-commits
mailing list