[oe-commits] org.oe.dev bluez-utils: update to 3.15, get out your a2dp headsets :)

[koen commit]

bluez-utils: update to 3.15, get out your a2dp headsets :)

Author: koen at openembedded.org
Branch: org.openembedded.dev
Revision: 0a1bbba5cea50e04cabcd0105f2b2fc40814b7a7
ViewMTN: http://monotone.openembedded.org/revision.psp?id=0a1bbba5cea50e04cabcd0105f2b2fc40814b7a7
Files:
1
packages/bluez/bluez-utils_3.15.bb
Diffs:

#
# mt diff -r303f9ee6b2b6053003a4c26532c7b6ce87c41e7d -r0a1bbba5cea50e04cabcd0105f2b2fc40814b7a7
#
# 
# 
# add_file "packages/bluez/bluez-utils_3.15.bb"
#  content [a6515be5f7deaf5c7ae08f4d976c5b84644d682f]
# 
============================================================
--- packages/bluez/bluez-utils_3.15.bb	a6515be5f7deaf5c7ae08f4d976c5b84644d682f
+++ packages/bluez/bluez-utils_3.15.bb	a6515be5f7deaf5c7ae08f4d976c5b84644d682f
@@ -0,0 +1,116 @@
+require bluez-utils.inc
+
+DEPENDS += "glib-2.0"
+
+# ti patch doesn't apply, people using it should rediff it and send it upstream
+SRC_URI = "http://bluez.sourceforge.net/download/bluez-utils-${PV}.tar.gz \
+           file://hcid.conf \
+#           file://hciattach-ti-bts.patch;patch=1 \
+          "
+PR = "r0"
+
+EXTRA_OECONF = " \
+                 --enable-bccmd \
+		 --enable-hid2hci \
+                 --enable-alsa \ 
+		 --enable-cups \
+		 --enable-glib \
+		 --disable-sdpd \
+	         --enable-network \
+	         --enable-serial \
+	         --enable-input \
+	         --enable-audio \
+	         --enable-echo \
+                 --enable-configfile \
+	         --enable-initscripts \
+		 --enable-test \
+		" 
+
+# The config options are explained below:
+
+#  --enable-obex           enable OBEX support
+#  --enable-alsa           enable ALSA support, not needed for nokia770, nokia800 and fic-gtao1
+#  --enable-cups           install CUPS backend support
+#  --enable-bccmd          install BCCMD interface utility
+#  --enable-avctrl         install Audio/Video control utility
+#  --enable-hid2hci        install HID mode switching utility
+#  --enable-dfutool        install DFU firmware upgrade utility
+
+#  --enable-glib           For systems that use and install GLib anyway
+#  --disable-sdpd          The sdpd is obsolete and should no longer be used. This of course requires that hcid will be started with -s to enable the SDP server
+
+#Following services can be enabled so far:
+#	--enable-network
+#	--enable-serial
+#	--enable-input
+#	--enable-audio
+#	--enable-echo
+
+#There is no need to modify any init script. They will be started
+#automatically or on demand. Only /etc/bluetooth/*.service files should
+#be patched to change name or the autostart value.
+#	--enable-configfile
+#	--enable-initscripts
+
+#For even smaller -doc packages
+#	--disable-manpages
+#	--disable-pcmciarules
+
+#I haven't seen any embedded device with HID proxy support. So simply
+#disable it:
+#	--disable-hid2hci
+
+
+PACKAGES =+ "${PN}-compat ${PN}-alsa"
+
+CONFFILES_${PN} = " \
+                   ${sysconfdir}/bluetooth/hcid.conf \
+                   ${sysconfdir}/default/bluetooth \
+                  "
+
+CONFFILES_${PN}-compat = " \
+                          ${sysconfdir}/bluetooth/rfcomm.conf \
+			 " 
+
+FILES_${PN} = " \
+               ${base_sbindir}/hcid \
+               ${libdir}/bluetooth \
+               ${sysconfdir}/init.d/bluetooth \
+               ${sysconfdir}/bluetooth/*.service \
+               ${sysconfdir}/bluetooth/hcid.conf \
+               ${sysconfdir}/default \
+               ${sysconfdir}/dbus-1 \
+	       ${base_sbindir}/hciattach \
+              "
+
+FILES_${PN}-dbg += " \
+                   ${libdir}/bluetooth/.debug \
+		   ${libdir}/cups/backend/.debug \
+		   ${libdir}/alsa-lib/.debug \
+		  " 
+
+FILES_${PN}-compat = " \
+                    ${base_bindir}/sdptool \
+                    ${base_bindir}/dund \
+		    ${base_bindir}/rctest \
+		    ${base_bindir}/ciptool \
+		    ${base_bindir}/l2test \
+		    ${base_bindir}/rfcomm \
+		    ${base_bindir}/hcitool \
+		    ${base_bindir}/pand \
+		    ${base_bindir}/hidd \
+		    ${base_bindir}/l2ping \
+		    ${base_sbindir}/hciconfig \
+                    ${base_sbindir}/bccmd \
+		    ${base_sbindir}/hciemu \
+		    ${base_sbindir}/hid2hci \
+		    ${base_bindir}/passkey-agent \
+		    ${sysconfdir}/bluetooth/rfcomm.conf \
+		   " 
+
+FILES_${PN}-alsa = "${libdir}/alsa-lib/libasound*"
+
+FILES_bluez-cups-backend = "${libdir}/cups/backend/bluetooth"
+RDEPENDS_bluez-cups-backend = "cups"
+
+