[oe-commits] org.oe.dev linux: Add linux-turbostation
nail commit
openembedded-commits at lists.openembedded.org
Thu Mar 1 10:08:10 UTC 2007
linux: Add linux-turbostation
Author: nail at nslu2-linux.org
Branch: org.openembedded.dev
Revision: a9e6f94b65227e58f5c546973c24a3202e0059a6
ViewMTN: http://monotone.openembedded.org/revision.psp?id=a9e6f94b65227e58f5c546973c24a3202e0059a6
Files:
1
packages/linux/linux-turbostation
packages/linux/linux-turbostation/2.6.20.1
packages/linux/linux-turbostation/001_r1000.diff
packages/linux/linux-turbostation/002_qnap-pic.diff
packages/linux/linux-turbostation/defconfig
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_Makefile
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_sandpoint.c
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_sandpoint.h
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_Makefile
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_mpc10x_common.c
packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_open_pic.c
packages/linux/linux-turbostation/linux-2.6.16_drivers_i2c_chips_Kconfig
packages/linux/linux-turbostation/linux-2.6.16_drivers_i2c_chips_Makefile
packages/linux/linux-turbostation/linux-2.6.16_drivers_mtd_maps_physmap.c
packages/linux/linux-turbostation/linux-2.6.16_drivers_net_r8169.c
packages/linux/linux-turbostation/linux-2.6.16_include_asm-ppc_mpc10x.h
packages/linux/linux-turbostation_2.6.20.1.bb
Diffs:
#
# mt diff -r30f9adf1a9a338847b5753a951c6b67cfc25d554 -ra9e6f94b65227e58f5c546973c24a3202e0059a6
#
#
#
# add_dir "packages/linux/linux-turbostation"
#
# add_dir "packages/linux/linux-turbostation/2.6.20.1"
#
# add_file "packages/linux/linux-turbostation/001_r1000.diff"
# content [1ee0be1c636310159070b16b38aa076d31da1819]
#
# add_file "packages/linux/linux-turbostation/002_qnap-pic.diff"
# content [ddb74f080f00134850f7d269b17e993b240aa1dd]
#
# add_file "packages/linux/linux-turbostation/defconfig"
# content [10ae018221ca93db86842f1a0ff16b3aa6641604]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_Makefile"
# content [246749cff8e6a4c3aff453f38c97fcba4596f9de]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_sandpoint.c"
# content [d2b4e6307ad2c9f2d1fc6b3ecfef980a2bda41fd]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_platforms_sandpoint.h"
# content [d62c7e88c6daa13444909ed95a6c12abba24ce5c]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_Makefile"
# content [1db1902d90b4b5fa80fab8556e05fbeabea6ccc5]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_mpc10x_common.c"
# content [3a55bc9263b616e78f1c2b2b3c000e13f7e6697c]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_arch_ppc_syslib_open_pic.c"
# content [72fe14294273e354f870e03f2b09c425394cdc8e]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_drivers_i2c_chips_Kconfig"
# content [1c1d513e1737f94891f8a4b9f938e4fd522b3ba8]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_drivers_i2c_chips_Makefile"
# content [cb3ce025c5b6964eff10d0938caa07f55000f8b4]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_drivers_mtd_maps_physmap.c"
# content [ad8248f7a6daea06643bd6be3568e49e8ae6fff9]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_drivers_net_r8169.c"
# content [52e494e903b09a5c4d3c75347d973508579e386f]
#
# add_file "packages/linux/linux-turbostation/linux-2.6.16_include_asm-ppc_mpc10x.h"
# content [e229cde83c73dc0747e8e2432735fdbf5c73aba6]
#
# add_file "packages/linux/linux-turbostation_2.6.20.1.bb"
# content [56e1a2c45fa55970bb3fa48b48d20ac07276ab06]
#
============================================================
--- packages/linux/linux-turbostation/001_r1000.diff 1ee0be1c636310159070b16b38aa076d31da1819
+++ packages/linux/linux-turbostation/001_r1000.diff 1ee0be1c636310159070b16b38aa076d31da1819
@@ -0,0 +1,2334 @@
+Index: linux-2.6.20.1/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.20.1.orig/drivers/net/Kconfig 2007-02-20 07:34:32.000000000 +0100
++++ linux-2.6.20.1/drivers/net/Kconfig 2007-02-28 20:29:04.000000000 +0100
+@@ -2085,6 +2085,16 @@
+
+ If in doubt, say Y.
+
++config R1000
++ tristate "Realtek 8169 gigabit ethernet support (R1000)"
++ depends on PCI
++ select CRC32
++ ---help---
++ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
++
++ To compile this driver as a module, choose M here: the module
++ will be called r1000_n. This is recommended.
++
+ config SIS190
+ tristate "SiS190/SiS191 gigabit ethernet support"
+ depends on PCI
+Index: linux-2.6.20.1/drivers/net/Makefile
+===================================================================
+--- linux-2.6.20.1.orig/drivers/net/Makefile 2007-02-20 07:34:32.000000000 +0100
++++ linux-2.6.20.1/drivers/net/Makefile 2007-02-28 20:29:04.000000000 +0100
+@@ -188,6 +188,7 @@
+ obj-$(CONFIG_NET_NETX) += netx-eth.o
+ obj-$(CONFIG_DL2K) += dl2k.o
+ obj-$(CONFIG_R8169) += r8169.o
++obj-$(CONFIG_R1000) += r1000_n.o r1000_ioctl.o
+ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+ obj-$(CONFIG_IBMVETH) += ibmveth.o
+ obj-$(CONFIG_S2IO) += s2io.o
+Index: linux-2.6.20.1/drivers/net/r1000.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.20.1/drivers/net/r1000.h 2007-02-28 20:29:04.000000000 +0100
+@@ -0,0 +1,390 @@
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/delay.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <asm/uaccess.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++
++#define R1000_VERSION "1.05"
++#define RELEASE_DATE "2006/10/25"
++#define MODULENAME "r1000"
++#define R1000_DRIVER_NAME MODULENAME R1000_VERSION ", the Linux device driver for Realtek Ethernet Controllers"
++#define PFX MODULENAME ": "
++
++
++#undef R1000_DEBUG
++#undef R1000_JUMBO_FRAME_SUPPORT
++//#undef R1000_HW_FLOW_CONTROL_SUPPORT
++#define R1000_HW_FLOW_CONTROL_SUPPORT
++
++
++#undef R1000_IOCTL_SUPPORT
++#define R1000_USE_IO
++
++#define R1000_BOTTOM_HALVES
++//#undef R1000_BOTTOM_HALVES
++
++#ifdef R1000_DEBUG
++ #define assert(expr) \
++ if(!(expr)) { printk( "Assertion failed! %s,%s,%s,line=%d\n", #expr,__FILE__,__FUNCTION__,__LINE__); }
++ #define DBG_PRINT( fmt, args...) printk("r1000: " fmt, ## args);
++#else
++ #define assert(expr) do {} while (0)
++ #define DBG_PRINT( fmt, args...) ;
++#endif // end of #ifdef R1000_DEBUG
++
++/* media options */
++#define MAX_UNITS 8
++
++#define OPTION_UNSET -1
++#define OPTION_DISABLED 0
++#define OPTION_ENABLED 1
++
++/* MAC address length*/
++#define MAC_ADDR_LEN 6
++
++#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
++#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
++#define TX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
++#define ETTh 0x3F /* 0x3F means NO threshold */
++
++#define ETH_HDR_LEN 14
++#define DEFAULT_MTU 1500
++#define DEFAULT_RX_BUF_LEN 1536
++
++
++#ifdef R1000_JUMBO_FRAME_SUPPORT
++#define MAX_JUMBO_FRAME_MTU ( 10000 )
++#define MAX_RX_SKBDATA_SIZE ( MAX_JUMBO_FRAME_MTU + ETH_HDR_LEN )
++#else
++//#define MAX_RX_SKBDATA_SIZE 1600
++#define MAX_RX_SKBDATA_SIZE 1608
++#endif //end #ifdef R1000_JUMBO_FRAME_SUPPORT
++
++
++#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
++
++#define NUM_TX_DESC 1024 /* Number of Tx descriptor registers*/
++#define NUM_RX_DESC 1024 /* Number of Rx descriptor registers*/
++
++#define RTL_MIN_IO_SIZE 0x80
++#define TX_TIMEOUT (6*HZ)
++#define R1000_TIMER_EXPIRE_TIME 100 //100
++
++#ifdef R1000_USE_IO
++#define RTL_W8(reg, val8) outb ((val8), ioaddr + (reg))
++#define RTL_W16(reg, val16) outw ((val16), ioaddr + (reg))
++#define RTL_W32(reg, val32) outl ((val32), ioaddr + (reg))
++#define RTL_R8(reg) inb (ioaddr + (reg))
++#define RTL_R16(reg) inw (ioaddr + (reg))
++#define RTL_R32(reg) ((unsigned long) inl (ioaddr + (reg)))
++#else //R1000_USE_IO
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6)
++/* write/read MMIO register for Linux kernel 2.4.x*/
++#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
++#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
++#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
++#define RTL_R8(reg) readb (ioaddr + (reg))
++#define RTL_R16(reg) readw (ioaddr + (reg))
++#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
++#else
++/* write/read MMIO register for Linux kernel 2.6.x*/
++#define RTL_W8(reg, val8) iowrite8 ((val8), (void *)(ioaddr + (reg)))
++#define RTL_W16(reg, val16) iowrite16 ((val16), (void *)(ioaddr + (reg)))
++#define RTL_W32(reg, val32) iowrite32 ((val32), (void *)(ioaddr + (reg)))
++#define RTL_R8(reg) ioread8 ((void *)(ioaddr + (reg)))
++#define RTL_R16(reg) ioread16 ((void *)(ioaddr + (reg)))
++#define RTL_R32(reg) ((unsigned long) ioread32 ((void *)(ioaddr + (reg))))
++#endif
++#endif //R1000_USE_IO
++
++#define MCFG_METHOD_1 0x01
++#define MCFG_METHOD_2 0x02
++#define MCFG_METHOD_3 0x03
++#define MCFG_METHOD_4 0x04
++#define MCFG_METHOD_5 0x05
++#define MCFG_METHOD_11 0x0B
++#define MCFG_METHOD_12 0x0C
++#define MCFG_METHOD_13 0x0D
++#define MCFG_METHOD_14 0x0E
++#define MCFG_METHOD_15 0x0F
++
++#define PCFG_METHOD_1 0x01 //PHY Reg 0x03 bit0-3 == 0x0000
++#define PCFG_METHOD_2 0x02 //PHY Reg 0x03 bit0-3 == 0x0001
++#define PCFG_METHOD_3 0x03 //PHY Reg 0x03 bit0-3 == 0x0002
++
++enum pci_config_header_registers {
++ VID = 0x00,
++ DID = 0x02,
++ Command = 0x04,
++ Status = 0x06,
++ Rev_ID = 0x08,
++ Class_Code = 0x09,
++ Cache_Line_Size = 0x0C,
++ Latency_Timer = 0x0D,
++ Header_type = 0x0E,
++ BIST = 0x0F,
++ IOAR = 0x10,
++ MEMAR = 0x14,
++ CIS_Pointer = 0x28,
++ Sub_VID = 0x2C,
++ Sub_DID = 0x2E,
++ BMAR = 0x30,
++ Interrupt_Line = 0x3C,
++ Interrutp_Pin = 0x3D,
++ Min_Gnt = 0x3E,
++ Max_Lat = 0x3F,
++};
++
++enum r1000_registers {
++ MAC0 = 0x00,
++ MAR0 = 0x08,
++ TxDescStartAddr = 0x20,
++ TxHDescStartAddr = 0x28,
++ FLASH = 0x30,
++ ERSR = 0x36,
++ ChipCmd = 0x37,
++ TxPoll = 0x38,
++ IntrMask = 0x3C,
++ IntrStatus = 0x3E,
++ TxConfig = 0x40,
++ RxConfig = 0x44,
++ TCTR = 0x48,
++ RxMissed = 0x4C,
++ Cfg9346 = 0x50,
++ Config0 = 0x51,
++ Config1 = 0x52,
++ Config2 = 0x53,
++ Config3 = 0x54,
++ Config4 = 0x55,
++ Config5 = 0x56,
++ TimerInt = 0x58,
++ MultiIntr = 0x5C,
++ PHYAR = 0x60,
++ TBICSR = 0x64,
++ TBI_ANAR = 0x68,
++ TBI_LPAR = 0x6A,
++ PHYstatus = 0x6C,
++ Off7Ch = 0x7C,
++ RxMaxSize = 0xDA,
++ CPlusCmd = 0xE0,
++ RxDescStartAddr = 0xE4,
++ ETThReg = 0xEC,
++ FuncEvent = 0xF0,
++ FuncEventMask = 0xF4,
++ FuncPresetState = 0xF8,
++ FuncForceEvent = 0xFC,
++};
++
++enum r1000_register_content {
++ /*InterruptStatusBits*/
++ SYSErr = 0x8000,
++ PCSTimeout = 0x4000,
++ SWInt = 0x0100,
++ TxDescUnavail = 0x80,
++ RxFIFOOver = 0x40,
++ LinkChg = 0x20,
++ RxDescUnavail = 0x10,
++ TxErr = 0x08,
++ TxOK = 0x04,
++ RxErr = 0x02,
++ RxOK = 0x01,
++
++ //TCTR/TimerInt contetn
++ CLK_tick = 0x1770, //for PCI clock=33MHz 0x1770=200usec
++
++ /*RxStatusDesc*/
++ RxRES = 0x00200000,
++ RxCRC = 0x00080000,
++ RxRUNT = 0x00100000,
++ RxRWT = 0x00400000,
++
++ /*ChipCmdBits*/
++ CmdReset = 0x10,
++ CmdRxEnb = 0x08,
++ CmdTxEnb = 0x04,
++ RxBufEmpty = 0x01,
++
++ /*Cfg9346Bits*/
++ Cfg9346_Lock = 0x00,
++ Cfg9346_Unlock = 0xC0,
++
++ /*rx_mode_bits*/
++ AcceptErr = 0x20,
++ AcceptRunt = 0x10,
++ AcceptBroadcast = 0x08,
++ AcceptMulticast = 0x04,
++ AcceptMyPhys = 0x02,
++ AcceptAllPhys = 0x01,
++
++ /*RxConfigBits*/
++ RxCfgFIFOShift = 13,
++ RxCfgDMAShift = 8,
++
++ /*TxConfigBits*/
++ TxInterFrameGapShift = 24,
++ TxDMAShift = 8,
++
++ //C+ Command Register
++ CPCR_MulRW_Enable = 0x0008,
++
++ /*rtl8169_PHYstatus (MAC offset 0x6C)*/
++ TBI_Enable = 0x80,
++ TxFlowCtrl = 0x40,
++ RxFlowCtrl = 0x20,
++ _1000Mbps = 0x10,
++ _100Mbps = 0x08,
++ _10Mbps = 0x04,
++ LinkStatus = 0x02,
++ FullDup = 0x01,
++
++ /*GIGABIT_PHY_registers*/
++ PHY_CTRL_REG = 0,
++ PHY_STAT_REG = 1,
++ PHY_AUTO_NEGO_REG = 4,
++ PHY_1000_CTRL_REG = 9,
++
++ /*GIGABIT_PHY_REG_BIT*/
++ PHY_Restart_Auto_Nego = 0x0200,
++ PHY_Enable_Auto_Nego = 0x1000,
++
++ //PHY_STAT_REG = 1;
++ PHY_Auto_Neco_Comp = 0x0020,
++
++ //PHY_AUTO_NEGO_REG = 4;
++ PHY_Cap_10_Half = 0x0020,
++ PHY_Cap_10_Full = 0x0040,
++ PHY_Cap_100_Half = 0x0080,
++ PHY_Cap_100_Full = 0x0100,
++
++ //PHY_1000_CTRL_REG = 9;
++ PHY_Cap_1000_Full = 0x0200,
++ PHY_Cap_1000_Half = 0x0100,
++
++ PHY_Cap_PAUSE = 0x0400,
++ PHY_Cap_ASYM_PAUSE = 0x0800,
++
++ PHY_Cap_Null = 0x0,
++
++ /*_MediaType*/
++ _10_Half = 0x01,
++ _10_Full = 0x02,
++ _100_Half = 0x04,
++ _100_Full = 0x08,
++ _1000_Full = 0x10,
++
++ /*_TBICSRBit*/
++ TBILinkOK = 0x02000000,
++};
++
++
++
++enum _DescStatusBit {
++ OWNbit = 0x80000000,
++ EORbit = 0x40000000,
++ FSbit = 0x20000000,
++ LSbit = 0x10000000,
++};
++
++
++struct TxDesc {
++ u32 status;
++ u32 vlan_tag;
++ u32 buf_addr;
++ u32 buf_Haddr;
++};
++
++struct RxDesc {
++ u32 status;
++ u32 vlan_tag;
++ u32 buf_addr;
++ u32 buf_Haddr;
++};
++
++#define r1000_request_timer( timer, timer_expires, timer_func, timer_data ) \
++{ \
++ init_timer(timer); \
++ timer->expires = (unsigned long)(jiffies + timer_expires); \
++ timer->data = (unsigned long)(timer_data); \
++ timer->function = (void *)(timer_func); \
++ add_timer(timer); \
++ DBG_PRINT("request_timer at 0x%08lx\n", (unsigned long)timer); \
++}
++
++#define r1000_delete_timer( del_timer_t ) \
++{ \
++ del_timer(del_timer_t); \
++ DBG_PRINT("delete_timer at 0x%08lx\n", (unsigned long)del_timer_t); \
++}
++
++#define r1000_mod_timer( timer, timer_expires ) \
++{ \
++ mod_timer( timer, jiffies + timer_expires ); \
++}
++
++typedef struct timer_list rt_timer_t;
++
++struct r1000_private {
++ unsigned long ioaddr; /* memory map physical address*/
++ struct pci_dev *pci_dev; /* Index of PCI device */
++ struct net_device_stats stats; /* statistics of net device */
++ spinlock_t lock; /* spin lock flag */
++ spinlock_t tx_lock; /* tx spin lock flag */
++ spinlock_t rx_lock; /* rx spin lock flag */
++ int chipset;
++ int mcfg;
++ int pcfg;
++ rt_timer_t r1000_timer;
++ unsigned long expire_time;
++
++#ifdef R1000_BOTTOM_HALVES
++ struct tasklet_struct r1000_rx_tasklet;
++ struct tasklet_struct r1000_tx_tasklet;
++#endif //R1000_BOTTOM_HALVES
++
++ unsigned int tx_cnt;
++
++ unsigned long phy_link_down_cnt;
++ unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
++ unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
++ unsigned long dirty_tx;
++ struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */
++ struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */
++ struct sk_buff *Tx_skbuff[NUM_TX_DESC];/* Index of Transmit data buffer */
++ struct sk_buff *Rx_skbuff[NUM_RX_DESC];/* Receive data buffer */
++ unsigned char drvinit_fail;
++
++ dma_addr_t txdesc_array_dma_addr[NUM_TX_DESC];
++ dma_addr_t rxdesc_array_dma_addr[NUM_RX_DESC];
++ dma_addr_t rx_skbuff_dma_addr[NUM_RX_DESC];
++
++ void *txdesc_space;
++ dma_addr_t txdesc_phy_dma_addr;
++ int sizeof_txdesc_space;
++
++ void *rxdesc_space;
++ dma_addr_t rxdesc_phy_dma_addr;
++ int sizeof_rxdesc_space;
++
++ int curr_mtu_size;
++ int tx_pkt_len;
++ int rx_pkt_len;
++
++ int hw_rx_pkt_len;
++
++ u16 speed;
++ u8 duplex;
++ u8 autoneg;
++};
++
++
+Index: linux-2.6.20.1/drivers/net/r1000_ioctl.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.20.1/drivers/net/r1000_ioctl.c 2007-02-28 20:29:04.000000000 +0100
+@@ -0,0 +1,129 @@
++#include "r1000.h"
++
++extern int R1000_READ_GMII_REG(unsigned long ioaddr, int RegAddr);
++extern int R1000_WRITE_GMII_REG(unsigned long ioaddr, int RegAddr, int value);
++extern int r1000_set_medium(struct net_device *netdev,u16 speed,u8 duplex,u8 autoneg);
++
++static int ethtool_get_settings(struct net_device *netdev,struct ethtool_cmd *ecmd){
++ struct r1000_private *priv = (struct r1000_private *)(netdev->priv);
++ unsigned long ioaddr = priv->ioaddr;
++ unsigned int bmcr = R1000_READ_GMII_REG(ioaddr,PHY_STAT_REG);
++ unsigned int bmsr = R1000_READ_GMII_REG(ioaddr,PHY_AUTO_NEGO_REG);
++ unsigned int gbcr = R1000_READ_GMII_REG(ioaddr,PHY_1000_CTRL_REG);
++
++ ecmd->supported = (SUPPORTED_10baseT_Half|
++ SUPPORTED_10baseT_Full|
++ SUPPORTED_100baseT_Half|
++ SUPPORTED_100baseT_Full|
++ SUPPORTED_1000baseT_Full|
++ SUPPORTED_Autoneg|
++ SUPPORTED_TP);
++
++ ecmd->advertising = ADVERTISED_TP;
++
++ if(bmsr&ADVERTISE_10HALF)
++ ecmd->advertising |= ADVERTISED_10baseT_Half;
++ if(bmsr&ADVERTISE_10FULL)
++ ecmd->advertising |= ADVERTISED_10baseT_Full;
++ if(bmsr&ADVERTISE_100HALF)
++ ecmd->advertising |= ADVERTISED_100baseT_Half;
++ if(bmsr&ADVERTISE_100FULL)
++ ecmd->advertising |= ADVERTISED_100baseT_Full;
++ if(gbcr&PHY_Cap_1000_Full)
++ ecmd->advertising |= ADVERTISED_1000baseT_Full;
++ if(bmcr&PHY_Enable_Auto_Nego)
++ ecmd->advertising |= ADVERTISED_Autoneg;
++
++ ecmd->port = PORT_TP;
++
++ if(priv->mcfg == MCFG_METHOD_1)
++ ecmd-%s
>>> DIFF TRUNCATED @ 16K
More information about the Openembedded-commits
mailing list