[oe-commits] org.oe.dev merge of '4b8f7f26130f7634d42162742570341b8a7446b0'
oe commit
openembedded-commits at lists.openembedded.org
Fri Sep 14 13:40:58 UTC 2007
merge of '4b8f7f26130f7634d42162742570341b8a7446b0'
and '8eb033e1267761674286fcf266b81e02c35fa3d6'
Author: oe at openembedded.org
Branch: org.openembedded.dev
Revision: 7da15dd442647956379d156f938fbc66c4db5251
ViewMTN: http://monotone.openembedded.org/revision/info/7da15dd442647956379d156f938fbc66c4db5251
Files:
1
packages/termcap
packages/termcap/termcap_11.0.1.bb
packages/vte/vte_0.16.8.bb
packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch
packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch
packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch
packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch
packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch
packages/linux/linux-ezx-2.6.21/rokre6/defconfig
packages/linux/linux-ezx_2.6.21.bb
Diffs:
#
# mt diff -r4b8f7f26130f7634d42162742570341b8a7446b0 -r7da15dd442647956379d156f938fbc66c4db5251
#
#
#
# add_dir "packages/termcap"
#
# add_file "packages/termcap/termcap_11.0.1.bb"
# content [48cdc1c638e5a412fa3ee8a54c4e33907a4ccbb5]
#
# patch "packages/vte/vte_0.16.8.bb"
# from [877f5cc30d4eaa0bb61c823b10a4536806cf11bf]
# to [4642ff116b6101c8293be250f4507ca114aa02b7]
#
============================================================
--- packages/termcap/termcap_11.0.1.bb 48cdc1c638e5a412fa3ee8a54c4e33907a4ccbb5
+++ packages/termcap/termcap_11.0.1.bb 48cdc1c638e5a412fa3ee8a54c4e33907a4ccbb5
@@ -0,0 +1,16 @@
+DESCRIPTION = "Terminal Capabilities File"
+SECTION = "base"
+HOMEPAGE = "http://www.catb.org/~esr/terminfo/"
+LICENSE = "PD"
+
+SRC_URI = "http://www.catb.org/~esr/terminfo/termtypes.tc.gz"
+S = "${WORKDIR}"
+
+do_install() {
+ install -d ${D}${sysconfdir}
+ install -m 0644 termtypes.tc ${D}${sysconfdir}/termcap
+}
+
+PACKAGES = "termcap"
+FILES_termcap = "${sysconfdir}"
+
============================================================
--- packages/vte/vte_0.16.8.bb 877f5cc30d4eaa0bb61c823b10a4536806cf11bf
+++ packages/vte/vte_0.16.8.bb 4642ff116b6101c8293be250f4507ca114aa02b7
@@ -1,6 +1,7 @@ LICENSE = "LGPL"
DESCRIPTION = "vte is a virtual terminal emulator"
LICENSE = "LGPL"
-PR = "r2"
+RDEPENDS = "termcap"
+PR = "r3"
inherit gnome
#
# mt diff -r8eb033e1267761674286fcf266b81e02c35fa3d6 -r7da15dd442647956379d156f938fbc66c4db5251
#
#
#
# add_file "packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch"
# content [29ee8f5ee384b18b942b0ec97bbf2863060ff82a]
#
# add_file "packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch"
# content [b8385b3213943fc06356d7e77b7ecaffe8e3dfac]
#
# add_file "packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch"
# content [715f781fee89350333c1781d78b37a273e08564c]
#
# add_file "packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch"
# content [94c28b6a622e7780a5b713495bdf60040bbf6a47]
#
# patch "packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch"
# from [7ae0fbd7af5f0ed2b8633335ff8bca92accc11a0]
# to [08a4e592d7b7f3c689b3e8366522a8364be174a7]
#
# patch "packages/linux/linux-ezx-2.6.21/rokre6/defconfig"
# from [4b0c0f319a6890f47528ab86421d62be1f3926c8]
# to [e76c158c332dcdd6e636e5b628f7f86daac14a22]
#
# patch "packages/linux/linux-ezx_2.6.21.bb"
# from [5d1ec4b9844eed9888871827926c283e7ba4f98c]
# to [6e4787b56b3ece5bf65f590bc86d49ad31617a39]
#
============================================================
--- packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch 29ee8f5ee384b18b942b0ec97bbf2863060ff82a
+++ packages/linux/linux-ezx-2.6.21/patches/e6-eoc.patch 29ee8f5ee384b18b942b0ec97bbf2863060ff82a
@@ -0,0 +1,82 @@
+Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 22:15:52.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-09 13:29:56.000000000 -0300
+@@ -25,6 +25,7 @@
+ #include <asm/arch/mmc.h>
+
+ #include "generic.h"
++#include "ezx-eoc.h"
+
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+@@ -227,11 +228,69 @@
+ .resource = pcap_ts_resources,
+ };
+
++
++/* EOC */
++static const unsigned int tab_init_eoc_reg[][2] =
++{
++ {POWER_IC_REG_EOC_INT_MASK, 0x00000FEF},
++ {POWER_IC_REG_EOC_POWER_CONTROL_0, 0x00000C00},
++ {POWER_IC_REG_EOC_POWER_CONTROL_1, 0x0000000C},
++ {POWER_IC_REG_EOC_CONN_CONTROL, 0x00021044},
++};
++
++static void dump_eoc_registers(void)
++{
++ int i, val = 0;
++
++ printk("========DUMP EOC=========\n");
++ for (i = 0; i < POWER_IC_REG_EOC_NUM; i++) {
++ eoc_reg_read(i, &val);
++ printk("eoc_registers[%d] = 0x%08X\n", i, val);
++ }
++ printk("========END DUMP=========\n");
++}
++
++/*
++ * FIXME: The same about the PCAP driver applies here.
++ * This is the initial state only.
++ * Which bits does the change to USB/UART/AUDIO mode?
++ * I think that this is causing the crash on pxa27x-udc
++ * you are setting the 'port connected' bit, and thats why
++ * you are getting interrupts early.
++ * --WM
++ */
++
++static int __init e6_eoc_init(void)
++{
++ int i;
++
++ for (i = 0; i < sizeof(tab_init_eoc_reg)/sizeof(unsigned int)/2; i++)
++ {
++ eoc_reg_write(tab_init_eoc_reg[i][0], tab_init_eoc_reg[i][1]);
++ }
++ dump_eoc_registers();
++ return 0;
++}
++
++static struct ezx_eoc_platform_data e6_eoc_platform_data = {
++ .init = e6_eoc_init,
++};
++
++struct platform_device e6_eoc_device = {
++ .name = "ezx-eoc",
++ .id = -1,
++ .dev = {
++ .platform_data = &e6_eoc_platform_data,
++ },
++};
++
+ static struct platform_device *devices[] __initdata = {
+ &e6_pcap_device,
+ &pcap_ts_device,
++ &e6_eoc_device,
+ };
+
++
+ static void __init e6_init(void)
+ {
+ set_pxa_fb_info(&e6_fb_info);
============================================================
--- packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch b8385b3213943fc06356d7e77b7ecaffe8e3dfac
+++ packages/linux/linux-ezx-2.6.21/patches/e6-mci.patch b8385b3213943fc06356d7e77b7ecaffe8e3dfac
@@ -0,0 +1,124 @@
+Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:51:55.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:54:52.000000000 -0300
+@@ -13,6 +13,8 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/fb.h>
++#include <linux/mmc/host.h>
++#include <linux/irq.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -20,12 +22,102 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
++#include <asm/arch/mmc.h>
+
+ #include "generic.h"
+
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+
++#ifdef CONFIG_EZX_PCAP
++extern int ezx_pcap_mmcsd_power(int);
++extern void ezx_pcap_mmcsd_voltage(u_int32_t);
++#else
++#define ezx_pcap_mmcsd_voltage(x) {}
++#define ezx_pcap_mmcsd_power(x) {}
++#endif
++
++static struct pxamci_platform_data e6_mci_platform_data;
++
++static u_int8_t mmc_voltage[] = {
++ [MMC_VDD_160] = 5,
++ [MMC_VDD_170] = 5,
++ [MMC_VDD_180] = 6,
++ [MMC_VDD_190] = 6,
++ [MMC_VDD_200] = 7,
++ [MMC_VDD_210] = 7,
++ [MMC_VDD_220] = 8,
++ [MMC_VDD_230] = 8,
++ [MMC_VDD_240] = 9,
++ [MMC_VDD_250] = 9,
++ [MMC_VDD_260] = 10,
++ [MMC_VDD_270] = 10,
++ [MMC_VDD_280] = 11,
++ [MMC_VDD_290] = 11,
++ [MMC_VDD_300] = 12,
++ [MMC_VDD_310] = 12,
++ [MMC_VDD_320] = 13,
++ [MMC_VDD_330] = 13,
++ [MMC_VDD_340] = 14,
++ [MMC_VDD_350] = 14,
++ [MMC_VDD_360] = 15,
++};
++
++static int e6_mci_init(struct device *dev,
++ irqreturn_t (*ezx_detect_int)(int, void *),
++ void *data)
++{
++ int err;
++
++ /* Setup GPIO for PXA27x MMC/SD controller */
++ pxa_gpio_mode(GPIO32_MMCCLK_MD);
++ pxa_gpio_mode(GPIO112_MMCCMD_MD);
++ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++ ezx_pcap_mmcsd_power(1);
++
++ e6_mci_platform_data.detect_delay = msecs_to_jiffies(250);
++
++ err = request_irq(0x49, ezx_detect_int, SA_INTERRUPT,
++ "MMC card detect", data);
++ if (err) {
++ printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
++ "MMC card detect IRQ\n");
++ return -1;
++ }
++
++ set_irq_type(0x0b, IRQT_BOTHEDGE);
++
++ return 0;
++}
++
++static void e6_mci_setpower(struct device *dev, unsigned int vdd)
++{
++ if (vdd <= MMC_VDD_360)
++ ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
++
++ ezx_pcap_mmcsd_power(1);
++}
++
++static void e6_mci_exit(struct device *dev, void *data)
++{
++ ezx_pcap_mmcsd_power(0);
++ free_irq(0x49, data);
++}
++
++static struct pxamci_platform_data e6_mci_platform_data = {
++ .ocr_mask = MMC_VDD_160_165|MMC_VDD_18_19|MMC_VDD_20_21
++ |MMC_VDD_22_23|MMC_VDD_24_25|MMC_VDD_26_27
++ |MMC_VDD_28_29|MMC_VDD_30_31|MMC_VDD_32_33
++ |MMC_VDD_34_35|MMC_VDD_35_36,
++ .init = e6_mci_init,
++ .setpower = e6_mci_setpower,
++ .exit = e6_mci_exit,
++};
++
+ static struct pxafb_mode_info mode_e6 = {
+ .pixclock = 192308,
+ .xres = 240,
+@@ -118,6 +210,7 @@
+ static void __init e6_init(void)
+ {
+ set_pxa_fb_info(&e6_fb_info);
++ pxa_set_mci_info(&e6_mci_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ }
============================================================
--- packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch 715f781fee89350333c1781d78b37a273e08564c
+++ packages/linux/linux-ezx-2.6.21/patches/e6-pcap.patch 715f781fee89350333c1781d78b37a273e08564c
@@ -0,0 +1,83 @@
+Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:32:32.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:51:55.000000000 -0300
+@@ -19,6 +19,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
+
+ #include "generic.h"
+
+@@ -48,7 +49,70 @@
+ .pxafb_lcd_power = &ezx_lcd_power,
+ };
+
++/* PCAP */
++static int __init e6_pcap_init(void)
++{
++ /*
++ * FIXME: this is the PCAP INITIAL STATE.
++ * most of these writes should NOT be done here
++ * * voltage regulators, voltage enablers should be set by the
++ * driver which uses the connected hardware. Otherwise you
++ * drain power unnecessarily.
++ * * interrupt related registers should be set by the irq functions
++ * only. I think that the INT_SEL register selects on which irq
++ * pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but
++ * only if it actually makes any difference.
++ * * Only power state automatic changes should be done here.
++ * (*LOWPWR, *STBY, LOWPWR*)
++ * * I removed some writes which i consider extremelly wrong. And
++ * which i think will not break anything (they were overwritten
++ * later anyway).
++ *
++ * --WM
++ */
++ ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
++ ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
++ ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
++ ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
++ ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
++ ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
++ ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
++ ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
++ ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
++ ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
++ ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
++
++ return 0;
++}
++
++static struct pcap_platform_data e6_pcap_platform_data = {
++ .port = 1,
++ .cs = GPIO_SPI_CE,
++ .flags = PCAP_CS_AH | PCAP_MCI_SD,
++ .clk = 1,
++ .init = e6_pcap_init,
++};
++
++static struct resource e6_pcap_resources[] = {
++ [0] = {
++ .start = IRQ_GPIO1,
++ .end = IRQ_GPIO1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++struct platform_device e6_pcap_device = {
++ .name = "ezx-pcap",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(e6_pcap_resources),
++ .resource = e6_pcap_resources,
++ .dev = {
++ .platform_data = &e6_pcap_platform_data,
++ },
++};
++
+ static struct platform_device *devices[] __initdata = {
++ &e6_pcap_device,
+ };
+
+ static void __init e6_init(void)
============================================================
--- packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch 94c28b6a622e7780a5b713495bdf60040bbf6a47
+++ packages/linux/linux-ezx-2.6.21/patches/e6-ts.patch 94c28b6a622e7780a5b713495bdf60040bbf6a47
@@ -0,0 +1,38 @@
+Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:54:52.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:55:10.000000000 -0300
+@@ -203,8 +203,33 @@
+ },
+ };
+
++/* PCAP_TS */
++struct resource pcap_ts_resources[] = {
++ [0] = {
++ .start = EZX_IRQ_ADCDONE,
++ .end = EZX_IRQ_ADCDONE,
++ .flags = IORESOURCE_IRQ,
++ },
++ [1] = {
++ .start = EZX_IRQ_TS,
++ .end = EZX_IRQ_TS,
++ .flags = IORESOURCE_IRQ,
++ }
++};
++
++struct platform_device pcap_ts_device = {
++ .name = "pcap-ts",
++ .id = -1,
++ .dev = {
++ .parent = &e6_pcap_device.dev,
++ },
++ .num_resources = ARRAY_SIZE(pcap_ts_resources),
++ .resource = pcap_ts_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+ &e6_pcap_device,
++ &pcap_ts_device,
+ };
+
+ static void __init e6_init(void)
============================================================
--- packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch 7ae0fbd7af5f0ed2b8633335ff8bca92accc11a0
+++ packages/linux/linux-ezx-2.6.21/patches/ezx-eoc.patch 08a4e592d7b7f3c689b3e8366522a8364be174a7
@@ -1,8 +1,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ez
Index: linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c 2007-09-09 13:33:19.000000000 -0300
-@@ -0,0 +1,270 @@
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.c 2007-09-11 20:14:33.000000000 -0300
+@@ -0,0 +1,267 @@
+/*
+ * EZX EOC Driver for Motorola EZX phones
+ *
@@ -182,11 +182,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ez
+
+ eoc_i2c_client = new_client;
+
-+ if (pdata && pdata->init) {
++ if (pdata && pdata->init)
+ pdata->init();
-+ }
-+ else
-+ return -EINVAL;
+
+ eoc_switch_to_default();
+
@@ -276,7 +273,7 @@ Index: linux-2.6.21/arch/arm/mach-pxa/ez
Index: linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.h 2007-09-07 22:15:52.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/ezx-eoc.h 2007-09-09 21:46:27.000000000 -0300
@@ -0,0 +1,33 @@
+/*
+ * linux/arch/arm/mach-pxa/ezx-eoc.h
@@ -313,15 +310,15 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Kc
+#endif /* __EZX_EOC_H__ */
Index: linux-2.6.21/arch/arm/mach-pxa/Kconfig
===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-09-07 22:15:52.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-09-07 22:15:52.000000000 -0300
+--- linux-2.6.21.orig/arch/arm/mach-pxa/Kconfig 2007-09-09 21:46:27.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/Kconfig 2007-09-09 21:46:27.000000000 -0300
@@ -108,6 +108,12 @@
config EZX_PCAP
bool "PCAP Support"
+config EZX_EOC
+ tristate "EOC i2c driver of Motorola EZX phones"
-+ depends on I2C && EXPERIMENTAL && PXA_EZX_A1200
++ depends on I2C && EXPERIMENTAL
+ help
+ EOC i2c driver of Motorola EZX phones
+
@@ -330,8 +327,8 @@ Index: linux-2.6.21/arch/arm/mach-pxa/Ma
depends on EZX_PCAP
Index: linux-2.6.21/arch/arm/mach-pxa/Makefile
===================================================================
---- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-09-07 22:15:52.000000000 -0300
-+++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-09-07 22:15:52.000000000 -0300
+--- linux-2.6.21.orig/arch/arm/mach-pxa/Makefile 2007-09-09 21:46:27.000000000 -0300
++++ linux-2.6.21/arch/arm/mach-pxa/Makefile 2007-09-09 21:46:27.000000000 -0300
@@ -27,6 +27,7 @@
obj-$(CONFIG_EZX_BP) += ezx-bp.o
obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
============================================================
--- packages/linux/linux-ezx-2.6.21/rokre6/defconfig 4b0c0f319a6890f47528ab86421d62be1f3926c8
+++ packages/linux/linux-ezx-2.6.21/rokre6/defconfig e76c158c332dcdd6e636e5b628f7f86daac14a22
@@ -152,6 +152,7 @@ CONFIG_EZX_PCAP=y
CONFIG_PXA_EZX_E6=y
CONFIG_EZX_BP=y
CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
CONFIG_EZX_EMU=y
CONFIG_EZX_EMU_USB=y
# CONFIG_EZX_EMU_UART is not set
============================================================
--- packages/linux/linux-ezx_2.6.21.bb 5d1ec4b9844eed9888871827926c283e7ba4f98c
+++ packages/linux/linux-ezx_2.6.21.bb 6e4787b56b3ece5bf65f590bc86d49ad31617a39
@@ -1,10 +1,10 @@ EZX = "ezxdev"
DESCRIPTION = "2.6 Linux Development Kernel for the Motorola GSM phones A780 and E680"
SECTION = "kernel"
AUTHOR = "Harald Welte and the OpenEZX Team <openezx-devel at lists.openezx.org>"
HOMEPAGE = "http://www.openezx.org"
LICENSE = "GPL"
EZX = "ezxdev"
-PR = "${EZX}-r11"
+PR = "${EZX}-r12"
inherit kernel
@@ -22,9 +22,11 @@ SRC_URI = " \
file://patches/a780-pcap.patch;patch=1 \
file://patches/e680-pcap.patch;patch=1 \
file://patches/a1200-pcap.patch;patch=1 \
+ file://patches/e6-pcap.patch;patch=1 \
file://patches/a780-mci.patch;patch=1 \
file://patches/e680-mci.patch;patch=1 \
file://patches/a1200-mci.patch;patch=1 \
+ file://patches/e6-mci.patch;patch=1 \
file://patches/pxa27x-udc-support.2.patch;patch=1 \
file://patches/ezx-emu.patch;patch=1 \
file://patches/a780-emu.patch;patch=1 \
@@ -38,8 +40,10 @@ SRC_URI = " \
file://patches/a780-ts.patch;patch=1 \
file://patches/e680-ts.patch;patch=1 \
file://patches/a1200-ts.patch;patch=1 \
+ file://patches/e6-ts.patch;patch=1 \
file://patches/ezx-eoc.patch;patch=1 \
file://patches/a1200-eoc.patch;patch=1 \
+ file://patches/e6-eoc.patch;patch=1 \
file://patches/ezx-backli%s
>>> DIFF TRUNCATED @ 16K
More information about the Openembedded-commits
mailing list