[oe-commits] : SlugOS 5.0: task-slugos - temporarily add mdadm and raid1 support to base image
OE GIT Trial
gittrial at amethyst.openembedded.net
Sat Aug 30 00:02:04 UTC 2008
Module: OE.dev
Branch: master
Commit: bd9cb5411808f7568717380a94e3533ac9142278
URL: http://gitweb.openembedded.net//OE.dev.git/?a=commit;h=bd9cb5411808f7568717380a94e3533ac9142278
Author: <mwester at openembedded.org>
Date: Fri Aug 29 17:36:45 2008 +0000
SlugOS 5.0: task-slugos - temporarily add mdadm and raid1 support to base image
to facilitate broader testing, add netconsole to base image for next steps, and
cleanup comments in general.
---
packages/tasks/task-slugos.bb | 27 +++++++++++++--------------
1 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/packages/tasks/task-slugos.bb b/packages/tasks/task-slugos.bb
index 0a0dd65..e1092b6 100644
--- a/packages/tasks/task-slugos.bb
+++ b/packages/tasks/task-slugos.bb
@@ -6,7 +6,7 @@
DESCRIPTION = "Task packages for the SlugOS distribution"
HOMEPAGE = "http://www.nslu2-linux.org"
LICENSE = "MIT"
-PR = "r20"
+PR = "r21"
PACKAGE_ARCH = "${MACHINE_ARCH}"
COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
ALLOW_EMPTY = "1"
@@ -21,14 +21,10 @@ ALLOW_EMPTY = "1"
SLUGOS_STANDARD_RDEPENDS = ""
SLUGOS_STANDARD_RRECOMMENDS = ""
-# diff, cpio and find are required for turnup and ipkg.
+# The full cpio (non-busybox) is required for turnup and sysconfig.
SLUGOS_STANDARD_RRECOMMENDS += "\
cpio \
"
-## SlugOS 5.0 -- uses busybox diff & find; cpio still needs -p and ability to
-## create CRC archives before we can use busybox cpio - MJW
-#diffutils \
-#findutils \
# These lines add support for formatting ext2 and ext3 file systems
# on a hard disk attached to the NSLU2. ext3 is the standard Linux
@@ -41,12 +37,6 @@ e2fsprogs-badblocks \
e2fsprogs-blkid \
"
-# These lines add support for an X/Y/ZModem package called lrzsz
-# (this is of use for people with modified NSLU2 hardware which
-# supports a serial port.)
-## SlugOS 5.0 -- uses busybox rx command - MJW
-#SLUGOS_STANDARD_RRECOMMENDS += "lrzsz"
-
# Filesystem selection. Adding entries here adds the module to the
# image. The module must be built as part of nslu2-kernel (i.e. it
# must be specified as a module in the defconfig file). The NLS
@@ -100,6 +90,15 @@ kernel-module-mii \
kernel-module-ixp4xx-mac \
kernel-module-ixp4xx-qmgr \
kernel-module-via-velocity \
+kernel-module-netconsole \
+"
+
+# Add packages and modules required for RAID-1 support
+# (temporary, intended only to facilitate testing - MJW)
+SLUGOS_STANDARD_RRECOMMENDS += "\
+mdadm \
+kernel-module-md-mod \
+kernel-module-raid1 \
"
# Other candidate packages that have been considered and
@@ -110,10 +109,10 @@ kernel-module-via-velocity \
# kernel-module-isofs \
# kernel-module-udf \
# kernel-module-loop \
-# kernel-module-netconsole \
+# wireless-tools \
# wpa-supplicant \
# zd1211-firmware kernel-module-zd1211rw \
-# madwifi-ng-modules madwifi-ng-tools wireless-tools \
+# madwifi-ng-modules madwifi-ng-tools \
DISTRO_EXTRA_DEPENDS ?= ""
DEPENDS += "${DISTRO_EXTRA_DEPENDS}"
More information about the Openembedded-commits
mailing list