[oe-commits] unknown propagate from branch 'org.openembedded.dev' (head 0f0f223484d369b6dd3347b0af81e9043083a3a6)

koen commit openembedded-commits at lists.openembedded.org
Wed Jan 23 17:57:59 UTC 2008 

propagate from branch 'org.openembedded.dev' (head 0f0f223484d369b6dd3347b0af81e9043083a3a6)
            to branch 'org.openembedded.dev.avr32' (head 979e73021b273ae65b6f3b1f59da5efb6f436a3d)

Author: koen at openembedded.org
Branch: unknown
Revision: 8d2823c98a60bf20ec74e6b0438ac854b56f252c
ViewMTN: http://monotone.openembedded.org/revision/info/8d2823c98a60bf20ec74e6b0438ac854b56f252c
Files:
1
packages/linux/linux/atngw100
packages/linux/linux-2.6.18
packages/linux/linux-2.6.18/at32stk1000
packages/linux/linux-2.6.18/atngw100
packages/uclibc/uclibc
packages/busybox/busybox-1.2.1/install-should-unlink-dest-if-it-exists.patch
packages/busybox/files/install-should-unlink-dest-if-it-exists.patch
packages/gcc/avr32-gcc-cross_4.1.2.bb
packages/gcc/avr32-gcc_4.1.2.bb
packages/linux/linux/atngw100/defconfig
packages/linux/linux-2.6.18/0001-AVR32-Fix-compile-error-with-gcc-4.1.patch
packages/linux/linux-2.6.18/add-all-parameters-to-smc-driver.patch
packages/linux/linux-2.6.18/add-default-atngw-defconfig.patch
packages/linux/linux-2.6.18/add-flush_buffer-operation-to-uart_ops.patch
packages/linux/linux-2.6.18/add-hmatrix-support.patch
packages/linux/linux-2.6.18/add-ide-header.patch
packages/linux/linux-2.6.18/add-intc_pending_irq-to-intc.patch
packages/linux/linux-2.6.18/add-mach-specific-kconfig.patch
packages/linux/linux-2.6.18/at32-dac-oss-driver-clk-fix.patch
packages/linux/linux-2.6.18/at32-dac-oss-driver.patch
packages/linux/linux-2.6.18/at32ap7000-dmac-driver.patch
packages/linux/linux-2.6.18/at32ap7000-platform_device-definitions.patch
packages/linux/linux-2.6.18/at73c213-alsa-driver.patch
packages/linux/linux-2.6.18/atmel-ac97c-alsa-driver.patch
packages/linux/linux-2.6.18/atmel-husb2-udc-driver.patch
packages/linux/linux-2.6.18/atmel-lcdc-framebuffer-driver.patch
packages/linux/linux-2.6.18/atmel-macb-ethernet-driver.patch
packages/linux/linux-2.6.18/atmel-mci-debugfs.patch
packages/linux/linux-2.6.18/atmel-mci-init-nr_blocks-in-dma-request.patch
packages/linux/linux-2.6.18/atmel-mmc-host-driver.patch
packages/linux/linux-2.6.18/atmel-spi-master-driver.patch
packages/linux/linux-2.6.18/atmel-twi-driver.patch
packages/linux/linux-2.6.18/atmel-usart3-driver.patch
packages/linux/linux-2.6.18/atmel-version.patch
packages/linux/linux-2.6.18/atmel_spi-handle-rx-overrun.patch
packages/linux/linux-2.6.18/atmel_spi-send-zeroes-when-tx_buf-is-not-set.patch
packages/linux/linux-2.6.18/atstk1000-add-platform-data-for-mmc.patch
packages/linux/linux-2.6.18/atstk1000-board-fix-fbmem-setup.patch
packages/linux/linux-2.6.18/atstk1000-instantiate-devices.patch
packages/linux/linux-2.6.18/avr32-arch-neutral-gpio-api.patch
packages/linux/linux-2.6.18/avr32-arch.patch
packages/linux/linux-2.6.18/avr32-checkstack.patch
packages/linux/linux-2.6.18/avr32-dma-controller-framework.patch
packages/linux/linux-2.6.18/avr32-dont-include-asm-delay-h.patch
packages/linux/linux-2.6.18/avr32-drop-GFP_COMP-for-DMA-memory-allocations.patch
packages/linux/linux-2.6.18/avr32-fix-oprofile-interrupts.patch
packages/linux/linux-2.6.18/avr32-gpio-dev.patch
packages/linux/linux-2.6.18/avr32-increment-pointer-when-parsing-for-fbmem_start.patch
packages/linux/linux-2.6.18/avr32-little-endian-read-write-bwl.patch
packages/linux/linux-2.6.18/avr32-move-ethernet-tag-parsing-to-board-specific-code.patch
packages/linux/linux-2.6.18/avr32-network-gateway-support.patch
packages/linux/linux-2.6.18/avr32-oprofile.patch
packages/linux/linux-2.6.18/avr32-sound.patch
packages/linux/linux-2.6.18/avr32-time-add-shared-interrupts.patch
packages/linux/linux-2.6.18/avr32-unistd-h-move-ifdef-kernel.patch
packages/linux/linux-2.6.18/avr32_defconfig
packages/linux/linux-2.6.18/dmac-add-explicit-blockcount-to-dma_request_sg.patch
packages/linux/linux-2.6.18/dmac-stopping-idle-channel-is-not-fatal.patch
packages/linux/linux-2.6.18/dont-include-map-h-from-physmap-h.patch
packages/linux/linux-2.6.18/fix-alpha-color-bitfield.patch
packages/linux/linux-2.6.18/fix-gpio-prototypes.patch
packages/linux/linux-2.6.18/fix-lcd-display-off-by-two-problem.patch
packages/linux/linux-2.6.18/fix-usart3-rx-BUG.patch
packages/linux/linux-2.6.18/gpio-define-pio-none.patch
packages/linux/linux-2.6.18/gpio-dev-blocking-read.patch
packages/linux/linux-2.6.18/gpio-dev-robustness.patch
packages/linux/linux-2.6.18/husb2_udc-test-mode.patch
packages/linux/linux-2.6.18/jffs2_can_mark_obsolete-should-return-0-for-dataflash.patch
packages/linux/linux-2.6.18/kbuild-add-unifdef.patch
packages/linux/linux-2.6.18/kbuild-replace-use-of-strlcpy-with-a-dedicated-implmentation-in-unifdef.patch
packages/linux/linux-2.6.18/kbuild-use-in-kernel-unifdef.patch
packages/linux/linux-2.6.18/lcdc-do-not-clear-mem-if-fbmem_start-is-set.patch
packages/linux/linux-2.6.18/lcdc-fix-possible-null-pointer-and-match-guard-time-to-uboot.patch
packages/linux/linux-2.6.18/lcdc-wait-for-vsync.patch
packages/linux/linux-2.6.18/ltv350qv-add-initial_power_state-param.patch
packages/linux/linux-2.6.18/ltv350qv-lcd-driver.patch
packages/linux/linux-2.6.18/mmc-add-bit-manipulating-macros.patch
packages/linux/linux-2.6.18/mmc-add-detect-card-and-wp-support.patch
packages/linux/linux-2.6.18/mmc-add-platform-data.patch
packages/linux/linux-2.6.18/mmc-core-dma-fix.patch
packages/linux/linux-2.6.18/mtd-fix-atmel-pri-for-cmdset-0001-and-cmdset-0002.patch
packages/linux/linux-2.6.18/mtd-unlock-nor-flash-automatically-where-necessary.patch
packages/linux/linux-2.6.18/ngw-fix-usart-initialization.patch
packages/linux/linux-2.6.18/ngw100-change-spi-clock-on-dataflash.patch
packages/linux/linux-2.6.18/pio-deglitch.patch
packages/linux/linux-2.6.18/pio-interrupt-controller.patch
packages/linux/linux-2.6.18/rename-ttyUS-to-ttyS-or-ttyAT.patch
packages/linux/linux-2.6.18/renumber-usart-devices.patch
packages/linux/linux-2.6.18/spi-fix-spi-busnum-to-master-buffer-and-bus_num-0.patch
packages/linux/linux-2.6.18/spi-reduce-dlybs-and-dlybct.patch
packages/linux/linux-2.6.18/spi-set-kset-of-master-class-dev-explicitly.patch
packages/linux/linux-2.6.18/update-atstk1002_defconfig.patch
packages/linux/linux-2.6.18/usart-make-rx-timeout-baudrate-independent.patch
packages/linux/linux-2.6.18/usb-ethernet-align-all-descriptors-on-a-word-boundary.patch
packages/linux/linux-2.6.18/usb-ethernet-define-cdc-capability-for-husb2.patch
packages/linux/linux-2.6.18/usb-file-storage-align-all-descriptors-on-a-word-boundary.patch
packages/linux/linux-2.6.18/usb-serial-align-all-descriptors-on-a-word-boundary.patch
packages/linux/linux-2.6.18/usb-zero-align-all-descriptors-on-a-word-boundary.patch
packages/linux/linux_2.6.18.bb
packages/uclibc/uclibc-0.9.28/avr32/avr32-arch-2.patch
packages/uclibc/uclibc-0.9.28/avr32/avr32-linkrelax-option.patch
packages/uclibc/uclibc-0.9.28/avr32/avr32-string-ops.patch
packages/uclibc/uclibc-0.9.28/avr32/fix-__libc_fcntl64-varargs-prototype.patch
packages/uclibc/uclibc-0.9.28/avr32/fix-broken-__libc_open-declaration.patch
packages/uclibc/uclibc-0.9.28/avr32/fix-getrusage-argument-type.patch
packages/uclibc/uclibc-0.9.28/avr32/ldd-avr32-support.patch
packages/uclibc/uclibc-0.9.28/avr32/ldso-always-inline-_dl_memcpy.patch
packages/uclibc/uclibc-0.9.28/avr32/ldso-always-inline-syscalls.patch
packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-2.patch
packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-needs-CONSTANT_STRING_GOT_FIXUP.patch
packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-startup-hack.patch
packages/uclibc/uclibc-0.9.28/avr32/let-optimized-stringops-override-default-ones.patch
packages/uclibc/uclibc-0.9.28/avr32/libpthread-avr32.patch
packages/uclibc/uclibc-0.9.28/avr32/no-create_module-on-avr32.patch
packages/uclibc/uclibc-0.9.28/avr32/remove-bogus-version-hack-and-just-use-asm-generic-if-it-exists.patch
packages/uclibc/uclibc-0.9.28/avr32/sync-fcntl-h-with-linux-kernel.patch
packages/uclibc/uclibc-0.9.28/avr32/uClibc-0.9.28-avr32-20060621.patch
packages/uclibc/uclibc-0.9.28/avr32/uClibc-0.9.28-avr32-20061019.patch
packages/uclibc/uclibc-0.9.28/avr32/uclibc-avr32-kernheaders.spec
packages/uclibc/uclibc-0.9.28/avr32/uclibc-avr32-no-msoft-float.patch
packages/uclibc/uclibc-0.9.28/avr32/uclibc-makefile.patch
conf/machine/at32stk1000.conf
conf/machine/atngw100.conf
packages/busybox/busybox_1.2.1.bb
packages/uclibc/uclibc-0.9.28/avr32/uClibc.config
packages/uclibc/uclibc.inc
packages/uclibc/uclibc_0.9.28.bb
site/avr32-common
mtn:execute
true
packages/webkit/webkit
packages/webkit/files
packages/webkit/webkit_svn.bb
packages/webkit/webkit-gtk_svn.bb
packages/linux-libc-headers/linux-libc-headers-2.6.22
packages/linux-libc-headers/linux-libc-headers-2.6.22/procinfo.h
packages/linux-libc-headers/linux-libc-headers_2.6.22.bb
packages/gtk-webcore/midori_0.0.4.bb
packages/openmoko2/openmoko-feedreader2_svn.bb
packages/openssh/openssh_4.6p1.bb
packages/slugos-init/files/initscripts/zleds
packages/slugos-init/slugos-init_0.10.bb
packages/uclibc/uclibc_svn.bb
Diffs:

#
# mt diff -r0f0f223484d369b6dd3347b0af81e9043083a3a6 -r8d2823c98a60bf20ec74e6b0438ac854b56f252c
#
# 
# 
# add_dir "packages/linux/linux/atngw100"
# 
# add_dir "packages/linux/linux-2.6.18"
# 
# add_dir "packages/linux/linux-2.6.18/at32stk1000"
# 
# add_dir "packages/linux/linux-2.6.18/atngw100"
# 
# add_dir "packages/uclibc/uclibc"
# 
# add_file "packages/busybox/busybox-1.2.1/install-should-unlink-dest-if-it-exists.patch"
#  content [7501d64051be6b8ad3f6ab302172acde1768b538]
# 
# add_file "packages/busybox/files/install-should-unlink-dest-if-it-exists.patch"
#  content [7501d64051be6b8ad3f6ab302172acde1768b538]
# 
# add_file "packages/gcc/avr32-gcc-cross_4.1.2.bb"
#  content [865fa477973d934db1034dc7ced5443f696494c5]
# 
# add_file "packages/gcc/avr32-gcc_4.1.2.bb"
#  content [a8dd6879717f7d02811895bc3a89276f78083510]
# 
# add_file "packages/linux/linux/atngw100/defconfig"
#  content [d2fc99d82f4678e5299a7432f290a2190c054ddc]
# 
# add_file "packages/linux/linux-2.6.18/0001-AVR32-Fix-compile-error-with-gcc-4.1.patch"
#  content [b07f729c84a5fa2fca71c7fe43be9706492f98eb]
# 
# add_file "packages/linux/linux-2.6.18/add-all-parameters-to-smc-driver.patch"
#  content [a42ca7030b1cf972d5a811764490bbe81d361216]
# 
# add_file "packages/linux/linux-2.6.18/add-default-atngw-defconfig.patch"
#  content [3a2bb7dc3930b31b366e6dbec293ce7a40249aa6]
# 
# add_file "packages/linux/linux-2.6.18/add-flush_buffer-operation-to-uart_ops.patch"
#  content [8a1ed6f112f9b8b2fc00fb21db8bfe5d0612e4a3]
# 
# add_file "packages/linux/linux-2.6.18/add-hmatrix-support.patch"
#  content [153d36d9183845f71e4164a413867af7537f0c4f]
# 
# add_file "packages/linux/linux-2.6.18/add-ide-header.patch"
#  content [3a9c08cd0a69df9fa41ee5d97fa9af728ce58061]
# 
# add_file "packages/linux/linux-2.6.18/add-intc_pending_irq-to-intc.patch"
#  content [b212f54698f759d4174bb221afd7ec3175953696]
# 
# add_file "packages/linux/linux-2.6.18/add-mach-specific-kconfig.patch"
#  content [6c2b2f24cfce2e9adfb5b6786c024d21ba05e2cf]
# 
# add_file "packages/linux/linux-2.6.18/at32-dac-oss-driver-clk-fix.patch"
#  content [4fda109bb90911d085cc9ffa9301ce2db1c0ac79]
# 
# add_file "packages/linux/linux-2.6.18/at32-dac-oss-driver.patch"
#  content [2c2c09d4e69de9b40ce728002291fb018f3bb1d7]
# 
# add_file "packages/linux/linux-2.6.18/at32ap7000-dmac-driver.patch"
#  content [81648af9b072b2b577e5976eb32c749aed206e58]
# 
# add_file "packages/linux/linux-2.6.18/at32ap7000-platform_device-definitions.patch"
#  content [ea11f5d193a5bed747d524a60a1cb9952f0e6624]
# 
# add_file "packages/linux/linux-2.6.18/at73c213-alsa-driver.patch"
#  content [0c859bfe3191a4c810a1840d48f0a3a7c0547e2f]
# 
# add_file "packages/linux/linux-2.6.18/atmel-ac97c-alsa-driver.patch"
#  content [a1faf5d1cc3218171b230a3bb341cf913d18a395]
# 
# add_file "packages/linux/linux-2.6.18/atmel-husb2-udc-driver.patch"
#  content [4dd6b0a887bba0a2fd2c51e4261c8868585f209f]
# 
# add_file "packages/linux/linux-2.6.18/atmel-lcdc-framebuffer-driver.patch"
#  content [8f30ba82097a1ee4d10b58264021f1bf9549d2e3]
# 
# add_file "packages/linux/linux-2.6.18/atmel-macb-ethernet-driver.patch"
#  content [4c21ab6f5d81a51a060d914c516a0d6ca4593701]
# 
# add_file "packages/linux/linux-2.6.18/atmel-mci-debugfs.patch"
#  content [60c03659eeb0c19a1bdf16cc23ba40828b0af796]
# 
# add_file "packages/linux/linux-2.6.18/atmel-mci-init-nr_blocks-in-dma-request.patch"
#  content [fcbd9c06f27642fa7d58003902ce6c05fcf14df2]
# 
# add_file "packages/linux/linux-2.6.18/atmel-mmc-host-driver.patch"
#  content [12b71a19a2bfba14fbf92c4e3d48deaed57f6b1a]
# 
# add_file "packages/linux/linux-2.6.18/atmel-spi-master-driver.patch"
#  content [35ef191aadf9c3cda6e55e5182fceccd671bd4dc]
# 
# add_file "packages/linux/linux-2.6.18/atmel-twi-driver.patch"
#  content [67be6348a5cb051483dff59f958643e83816bda2]
# 
# add_file "packages/linux/linux-2.6.18/atmel-usart3-driver.patch"
#  content [423a027f05de373b96855b53eeb8e0d4daf9e465]
# 
# add_file "packages/linux/linux-2.6.18/atmel-version.patch"
#  content [c47152c3585473d570f3c431b1f27ea29ecafd45]
# 
# add_file "packages/linux/linux-2.6.18/atmel_spi-handle-rx-overrun.patch"
#  content [6e4614a862cafa124784ca847d10fcc9574f20d8]
# 
# add_file "packages/linux/linux-2.6.18/atmel_spi-send-zeroes-when-tx_buf-is-not-set.patch"
#  content [3698d3b261e871ec374c78f6f429eea313237112]
# 
# add_file "packages/linux/linux-2.6.18/atstk1000-add-platform-data-for-mmc.patch"
#  content [2dde3a7f7283e3a014b6989bb444938b9f7d2aea]
# 
# add_file "packages/linux/linux-2.6.18/atstk1000-board-fix-fbmem-setup.patch"
#  content [3219c467b202588db07a39dee79a295335886eec]
# 
# add_file "packages/linux/linux-2.6.18/atstk1000-instantiate-devices.patch"
#  content [ed4d8ad2ed9234ac70955ce6e9e83c0fb085ffef]
# 
# add_file "packages/linux/linux-2.6.18/avr32-arch-neutral-gpio-api.patch"
#  content [f4191be42f0482854c6e120834d9fddc0af377be]
# 
# add_file "packages/linux/linux-2.6.18/avr32-arch.patch"
#  content [e8fecb58215e76bebef13d2b772671bd27b5e117]
# 
# add_file "packages/linux/linux-2.6.18/avr32-checkstack.patch"
#  content [c369981d71adea405fe28ac921a02d2d5b5603d2]
# 
# add_file "packages/linux/linux-2.6.18/avr32-dma-controller-framework.patch"
#  content [ebd20a0862990ad87f2417cc61ec62e59d4714a2]
# 
# add_file "packages/linux/linux-2.6.18/avr32-dont-include-asm-delay-h.patch"
#  content [31002e8f6d8f03e6d4f32caa0f2e97ea9994979a]
# 
# add_file "packages/linux/linux-2.6.18/avr32-drop-GFP_COMP-for-DMA-memory-allocations.patch"
#  content [59cfbdb413df21fd3f41cc0f419c46ca2c78c0f1]
# 
# add_file "packages/linux/linux-2.6.18/avr32-fix-oprofile-interrupts.patch"
#  content [a863d652748bf50208c51cb29825547c4a8bd15c]
# 
# add_file "packages/linux/linux-2.6.18/avr32-gpio-dev.patch"
#  content [9ce84d6bc71e57aea9a4a4cb7caa87ed180305ea]
# 
# add_file "packages/linux/linux-2.6.18/avr32-increment-pointer-when-parsing-for-fbmem_start.patch"
#  content [806a49f21b943c67fb3ea1d82d8040336809986f]
# 
# add_file "packages/linux/linux-2.6.18/avr32-little-endian-read-write-bwl.patch"
#  content [31abaef65a0d61252ff243d02c1b53c4c9bc567f]
# 
# add_file "packages/linux/linux-2.6.18/avr32-move-ethernet-tag-parsing-to-board-specific-code.patch"
#  content [f20ee6bbd245ab2c2afed545f03fbb0a2a1134df]
# 
# add_file "packages/linux/linux-2.6.18/avr32-network-gateway-support.patch"
#  content [ccbd3a46c75374e5af323f3dc1f1897bb3c46ec9]
# 
# add_file "packages/linux/linux-2.6.18/avr32-oprofile.patch"
#  content [ec524ce4fdf78494a360bf57b313033dba24c2df]
# 
# add_file "packages/linux/linux-2.6.18/avr32-sound.patch"
#  content [3ef43720e09aee67103df76c8a09855707580f3a]
# 
# add_file "packages/linux/linux-2.6.18/avr32-time-add-shared-interrupts.patch"
#  content [471f862de86e3eb6ac46e566230f51287594d53c]
# 
# add_file "packages/linux/linux-2.6.18/avr32-unistd-h-move-ifdef-kernel.patch"
#  content [29ca6c9f6b5438b2a95b12e68f10b97dcf5a1208]
# 
# add_file "packages/linux/linux-2.6.18/avr32_defconfig"
#  content [807b7572794378b01fa2ef788642be123395cdb9]
# 
# add_file "packages/linux/linux-2.6.18/dmac-add-explicit-blockcount-to-dma_request_sg.patch"
#  content [1ae576f50e3f47c19608aa8198a706710f486f39]
# 
# add_file "packages/linux/linux-2.6.18/dmac-stopping-idle-channel-is-not-fatal.patch"
#  content [f581b6317f1f8ba89cf6720a2a6f412bb4adf57a]
# 
# add_file "packages/linux/linux-2.6.18/dont-include-map-h-from-physmap-h.patch"
#  content [6ba3f1cc08d02dd25d167360ed87622657a3779c]
# 
# add_file "packages/linux/linux-2.6.18/fix-alpha-color-bitfield.patch"
#  content [463a78073d4e7de47ccdb6d8ffa23b545a65b5f9]
# 
# add_file "packages/linux/linux-2.6.18/fix-gpio-prototypes.patch"
#  content [fd4e33bdb9a5a6a74eff022ec7ba4e501329c5d4]
# 
# add_file "packages/linux/linux-2.6.18/fix-lcd-display-off-by-two-problem.patch"
#  content [3ffabe62f44367ced2d1e761b52741c0abed3a6f]
# 
# add_file "packages/linux/linux-2.6.18/fix-usart3-rx-BUG.patch"
#  content [32d7ff16932c796a52a46b791a4d06a500bfbf44]
# 
# add_file "packages/linux/linux-2.6.18/gpio-define-pio-none.patch"
#  content [62f6f0b3c61982d02a293d45dd91a1d14035ea70]
# 
# add_file "packages/linux/linux-2.6.18/gpio-dev-blocking-read.patch"
#  content [1385387d7d394a78156387f20a072f51d63d934b]
# 
# add_file "packages/linux/linux-2.6.18/gpio-dev-robustness.patch"
#  content [a18568c0fcef3d6fbbb401b71a87fea2450fd6b3]
# 
# add_file "packages/linux/linux-2.6.18/husb2_udc-test-mode.patch"
#  content [d598fb1f1b53ab046c0444520bb588bd091f01fb]
# 
# add_file "packages/linux/linux-2.6.18/jffs2_can_mark_obsolete-should-return-0-for-dataflash.patch"
#  content [285439a6bdd727d9c0b5d9b7a79a9d35903ae042]
# 
# add_file "packages/linux/linux-2.6.18/kbuild-add-unifdef.patch"
#  content [6876a0c3bc3a68f16fb714c201861b68a8bd3781]
# 
# add_file "packages/linux/linux-2.6.18/kbuild-replace-use-of-strlcpy-with-a-dedicated-implmentation-in-unifdef.patch"
#  content [e221faf3cb3b49159e311a1b787a108a00152844]
# 
# add_file "packages/linux/linux-2.6.18/kbuild-use-in-kernel-unifdef.patch"
#  content [e60900272d6478fabbdd5510602eec1d3655c6a5]
# 
# add_file "packages/linux/linux-2.6.18/lcdc-do-not-clear-mem-if-fbmem_start-is-set.patch"
#  content [18cf7336983379187bdd44715bc496917ae83cbc]
# 
# add_file "packages/linux/linux-2.6.18/lcdc-fix-possible-null-pointer-and-match-guard-time-to-uboot.patch"
#  content [08fc7e904a7bd97cea6da082fac3369e12733a36]
# 
# add_file "packages/linux/linux-2.6.18/lcdc-wait-for-vsync.patch"
#  content [c766cf08e0f56c70ffa31f9a6787fb756d863406]
# 
# add_file "packages/linux/linux-2.6.18/ltv350qv-add-initial_power_state-param.patch"
#  content [6b15fe30b392cdcfe4f98498c5f6ce5d98d4e00a]
# 
# add_file "packages/linux/linux-2.6.18/ltv350qv-lcd-driver.patch"
#  content [1a6ddc2ece8b5883d91f520e24c0cc2f83d1b8a0]
# 
# add_file "packages/linux/linux-2.6.18/mmc-add-bit-manipulating-macros.patch"
#  content [31440037a7e0ef47f8c462558f805440b2b6f4d9]
# 
# add_file "packages/linux/linux-2.6.18/mmc-add-detect-card-and-wp-support.patch"
#  content [8c84075e2e5486966a56d9c3a6a12dd82aefb95a]
# 
# add_file "packages/linux/linux-2.6.18/mmc-add-platform-data.patch"
#  content [6e9f96ac2a08482a0363887328d67e54da7b255c]
# 
# add_file "packages/linux/linux-2.6.18/mmc-core-dma-fix.patch"
#  content [109134e972dbcfefa8049b52eab2c0d48724c2fa]
# 
# add_file "packages/linux/linux-2.6.18/mtd-fix-atmel-pri-for-cmdset-0001-and-cmdset-0002.patch"
#  content [8a553f4fc1890ae1146378d60af906ceed9402ff]
# 
# add_file "packages/linux/linux-2.6.18/mtd-unlock-nor-flash-automatically-where-necessary.patch"
#  content [5874fde3079100ecb077574b50528a564713ac3f]
# 
# add_file "packages/linux/linux-2.6.18/ngw-fix-usart-initialization.patch"
#  content [8b460efee2e0a892338faca983e47ee37fb0bd21]
# 
# add_file "packages/linux/linux-2.6.18/ngw100-change-spi-clock-on-dataflash.patch"
#  content [65badd45204e3a98e7558cbb104419d30c372091]
# 
# add_file "packages/linux/linux-2.6.18/pio-deglitch.patch"
#  content [58f423fbf0c51096c5ad2d1dcea8628fd1dfbe51]
# 
# add_file "packages/linux/linux-2.6.18/pio-interrupt-controller.patch"
#  content [9334d49b406f4f94cf2c0bec0d0e1a4671f228a3]
# 
# add_file "packages/linux/linux-2.6.18/rename-ttyUS-to-ttyS-or-ttyAT.patch"
#  content [933392714c909421f9784509666709127e1e9ef4]
# 
# add_file "packages/linux/linux-2.6.18/renumber-usart-devices.patch"
#  content [9213951d8eede72f92a3ff3465da871df9340c10]
# 
# add_file "packages/linux/linux-2.6.18/spi-fix-spi-busnum-to-master-buffer-and-bus_num-0.patch"
#  content [2f958f4a7bbf10bb529e01d275c9dd914063f02f]
# 
# add_file "packages/linux/linux-2.6.18/spi-reduce-dlybs-and-dlybct.patch"
#  content [92e44c97739f946bee74738f8f30b9d6e64f9511]
# 
# add_file "packages/linux/linux-2.6.18/spi-set-kset-of-master-class-dev-explicitly.patch"
#  content [daad686440f19eb9caa703614ad3fcddbe02341c]
# 
# add_file "packages/linux/linux-2.6.18/update-atstk1002_defconfig.patch"
#  content [5d248eac990210aee695da6e146d47b492927dbc]
# 
# add_file "packages/linux/linux-2.6.18/usart-make-rx-timeout-baudrate-independent.patch"
#  content [de073a9de6cfd268dbdaa9383fd2c71acb34c2f7]
# 
# add_file "packages/linux/linux-2.6.18/usb-ethernet-align-all-descriptors-on-a-word-boundary.patch"
#  content [605bbab02ac5718d4e494b484b655c547d438c17]
# 
# add_file "packages/linux/linux-2.6.18/usb-ethernet-define-cdc-capability-for-husb2.patch"
#  content [72342ed217e1bec7c9ded806c71f928958215617]
# 
# add_file "packages/linux/linux-2.6.18/usb-file-storage-align-all-descriptors-on-a-word-boundary.patch"
#  content [6587eff95e3501bfc13d825cf07a137d7653574e]
# 
# add_file "packages/linux/linux-2.6.18/usb-serial-align-all-descriptors-on-a-word-boundary.patch"
#  content [1a236cf8e157dda82651e5e890f82694e398facc]
# 
# add_file "packages/linux/linux-2.6.18/usb-zero-align-all-descriptors-on-a-word-boundary.patch"
#  content [a51c61b084628eb65c6f5006ac907697ea49ed20]
# 
# add_file "packages/linux/linux_2.6.18.bb"
#  content [5e24dd692fb1dcb2b12f397e1bf8e586b3e0c2ac]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/avr32-arch-2.patch"
#  content [b73c6cf87001866b8542a5ff6a93f3e02dfa9f65]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/avr32-linkrelax-option.patch"
#  content [2f9264ccf8ef44743af6ca3a1cdf27fc8fcd8241]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/avr32-string-ops.patch"
#  content [5fae94e40475f1af5df5db9c99c380120e74991f]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/fix-__libc_fcntl64-varargs-prototype.patch"
#  content [348b1b66d21fb8705eb10d07397ddf7ee197d6f8]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/fix-broken-__libc_open-declaration.patch"
#  content [c0d513a699f6dabf8883a606b9588a3a42a7fdc1]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/fix-getrusage-argument-type.patch"
#  content [53ad30522dbdedd301e5e668dce88784a48f1fcb]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldd-avr32-support.patch"
#  content [9fc4c962838e8d3f57a76d57a6aa53ffea7b8117]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldso-always-inline-_dl_memcpy.patch"
#  content [eac0ec00999e5a7a5e920a40d324aac6c68d1e25]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldso-always-inline-syscalls.patch"
#  content [fe593d5cb24e4b3eee2a0c3df5f9bc02d0b883d9]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-2.patch"
#  content [ff5efe89fa84688ac27ab77f153319139a94fb14]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-needs-CONSTANT_STRING_GOT_FIXUP.patch"
#  content [11ed5b646cd9cf0615f2cecd322b074b9db85a1a]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/ldso-avr32-startup-hack.patch"
#  content [325126d2b43b63e9ee725bbedbc46ff8d8e77d11]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/let-optimized-stringops-override-default-ones.patch"
#  content [6597d08ccac6918a89d4773965b1661ecd34bfa1]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/libpthread-avr32.patch"
#  content [92d2944519d9f1ed5ce260915cf28125ff11f4da]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/no-create_module-on-avr32.patch"
#  content [168d60ba5a6b3bb1ccb2177c96ad989b17ff2411]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/remove-bogus-version-hack-and-just-use-asm-generic-if-it-exists.patch"
#  content [0130cb3b4de94ad8d5e77e7d8370e328ef1b860c]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/sync-fcntl-h-with-linux-kernel.patch"
#  content [7b07e130f84249d89904bf90c0a2d115ea3db9bb]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/uClibc-0.9.28-avr32-20060621.patch"
#  content [b27c31c62fb9a336a75f0335e756d8da9d0a2ab9]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/uClibc-0.9.28-avr32-20061019.patch"
#  content [8759b7aca85c81ded55e481664858fa881a2df33]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/uclibc-avr32-kernheaders.spec"
#  content [289626028b36f7ce5d33e4d390d0e7bc67901ff6]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/uclibc-avr32-no-msoft-float.patch"
#  content [215ea42a1ebd9596871f92ecca80a355306a6433]
# 
# add_file "packages/uclibc/uclibc-0.9.28/avr32/uclibc-makefile.patch"
#  content [2c19928703ea11c46e0b7d1fbb7f98a1b9a3b9d2]
# 
# patch "conf/machine/at32stk1000.conf"
#  from [2ab48481fd9d3e2e4648ce9d96d680c3d78cde4a]
#    to [8fd12076b3bea8e74a23f364c5f5b14d49470af9]
# 
# patch "conf/machine/atngw100.conf"
#  from [b5cb85b6f35f560c53155b1363a067be0a9a9192]
#    to [f37d5634360b58f24537cb47adb576c2271adcca]
# 
# patch "packages/busybox/busybox_1.2.1.bb"
#  from [bbd3e1d71e9143dcc0ad5cc7b1df2f1fce1d040e]
#    to [d51e1c89f674cc7a7f6d832861eb3101def1b7f4]
# 
# patch "pac%s
>>> DIFF TRUNCATED @ 16K


#
# mt diff -r979e73021b273ae65b6f3b1f59da5efb6f436a3d -r8d2823c98a60bf20ec74e6b0438ac854b56f252c
#
# 
# 
# rename "packages/webkit/webkit"
#     to "packages/webkit/files"
# 
# rename "packages/webkit/webkit_svn.bb"
#     to "packages/webkit/webkit-gtk_svn.bb"
# 
# add_dir "packages/linux-libc-headers/linux-libc-headers-2.6.22"
# 
# add_file "packages/linux-libc-headers/linux-libc-headers-2.6.22/procinfo.h"
#  content [d25df5c46fa7bcbf7d5e7d097e80d032aee11716]
# 
# add_file "packages/linux-libc-headers/linux-libc-headers_2.6.22.bb"
#  content [315a90b6e90272ad612070887ceec548917a74d4]
# 
# patch "packages/gtk-webcore/midori_0.0.4.bb"
#  from [67de3ad0eccace5211a44c511a1b93e7183e0d95]
#    to [02453b1794116c17e282c8cce5aacd1375feeae2]
# 
# patch "packages/openmoko2/openmoko-feedreader2_svn.bb"
#  from [d843ad634a14cfaaa1ee7602130f9b1ace15dd7c]
#    to [f08e50dd63abd757d91d92c33789196eebe7128f]
# 
# patch "packages/openssh/openssh_4.6p1.bb"
#  from [59b74e2e06b33ac4b9f999bb6c689c636cdd7849]
#    to [af980ce34132a255f09adfcc9c6dca24ba3fa96a]
# 
# patch "packages/slugos-init/files/initscripts/zleds"
#  from [edd8cca58c4f20772a52043f0c624d12da5c188a]
#    to [f0b04d6a1e54996a69d9478c9965d97a225e7566]
# 
# patch "packages/slugos-init/slugos-init_0.10.bb"
#  from [838d2b4d97516e7beb1501277067200126a20075]
#    to [b86dcf4eeaea00eac2b46b43ce047bfcb81bec2e]
# 
# patch "packages/uclibc/uclibc_svn.bb"
#  from [b34e3bc8b7ac5e3131e17f86e2f08c38aba35130]
#    to [92cb851f710f300b1521589a72e241b2b21569ad]
# 
============================================================
--- packages/linux-libc-headers/linux-libc-headers-2.6.22/procinfo.h	d25df5c46fa7bcbf7d5e7d097e80d032aee11716
+++ packages/linux-libc-headers/linux-libc-headers-2.6.22/procinfo.h	d25df5c46fa7bcbf7d5e7d097e80d032aee11716
@@ -0,0 +1,24 @@
+/*
+ *  linux/include/asm-arm/procinfo.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#define HWCAP_SWP	1
+#define HWCAP_HALF	2
+#define HWCAP_THUMB	4
+#define HWCAP_26BIT	8	/* Play it safe */
+#define HWCAP_FAST_MULT	16
+#define HWCAP_FPA	32
+#define HWCAP_VFP	64
+#define HWCAP_EDSP	128
+#define HWCAP_JAVA	256
+#define HWCAP_IWMMXT	512
+#define HWCAP_CRUNCH	1024
+#endif
============================================================
--- packages/linux-libc-headers/linux-libc-headers_2.6.22.bb	315a90b6e90272ad612070887ceec548917a74d4
+++ packages/linux-libc-headers/linux-libc-headers_2.6.22.bb	315a90b6e90272ad612070887ceec548917a74d4
@@ -0,0 +1,73 @@
+require linux-libc-headers.inc
+
+INHIBIT_DEFAULT_DEPS = "1"
+DEPENDS = "unifdef-native"
+PR = "r0"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
+           file://procinfo.h"
+
+S = "${WORKDIR}/linux-${PV}"
+
+set_arch() {
+	case ${TARGET_ARCH} in
+		alpha*)   ARCH=alpha ;;
+		arm*)     ARCH=arm ;;
+		cris*)    ARCH=cris ;;
+		hppa*)    ARCH=parisc ;;
+		i*86*)    ARCH=i386 ;;
+		ia64*)    ARCH=ia64 ;;
+		mips*)    ARCH=mips ;;
+		m68k*)    ARCH=m68k ;;
+		powerpc*) ARCH=powerpc ;;
+		s390*)    ARCH=s390 ;;
+		sh*)      ARCH=sh ;;
+		sparc64*) ARCH=sparc64 ;;
+		sparc*)   ARCH=sparc ;;
+		x86_64*)  ARCH=x86_64 ;;
+	        avr32*)   ARCH=avr32 ;;
+                bfin*)    ARCH=blackfin ;;
+	esac
+}
+
+do_configure() {
+	set_arch
+	oe_runmake allnoconfig ARCH=$ARCH
+}
+
+do_compile () {
+}
+
+do_install() {
+	set_arch
+	oe_runmake headers_install INSTALL_HDR_PATH=${D}/usr ARCH=$ARCH
+}
+
+do_install_append_arm() {
+	cp ${WORKDIR}/procinfo.h ${D}${includedir}/asm/
+}
+
+STAGE_TEMP="${WORKDIR}/temp-staging"
+
+do_stage () {
+	set_arch
+	echo $ARCH
+	rm -rf ${STAGE_TEMP}
+	mkdir -p ${STAGE_TEMP}
+	oe_runmake headers_install INSTALL_HDR_PATH=${STAGE_TEMP}/usr ARCH=$ARCH
+	if [ "$ARCH" = "arm" ]; then
+		cp ${WORKDIR}/procinfo.h ${STAGE_TEMP}${includedir}/asm/
+	fi
+	install -d ${STAGING_INCDIR}
+	rm -rf ${STAGING_INCDIR}/linux ${STAGING_INCDIR}/asm ${STAGING_INCDIR}/asm-generic
+	cp -pfLR ${STAGE_TEMP}${includedir}/linux ${STAGING_INCDIR}/
+	cp -pfLR ${STAGE_TEMP}${includedir}/asm ${STAGING_INCDIR}/
+	cp -pfLR ${STAGE_TEMP}${includedir}/asm-generic ${STAGING_INCDIR}/
+	rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/linux
+	rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/asm
+	rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/asm-generic
+	install -d ${CROSS_DIR}/${TARGET_SYS}/include
+	cp -pfLR ${STAGE_TEMP}${includedir}/linux ${CROSS_DIR}/${TARGET_SYS}/include/
+	cp -pfLR ${STAGE_TEMP}${includedir}/asm ${CROSS_DIR}/${TARGET_SYS}/include/
+	cp -pfLR ${STAGE_TEMP}${includedir}/asm-generic ${CROSS_DIR}/${TARGET_SYS}/include/
+}
============================================================
--- packages/gtk-webcore/midori_0.0.4.bb	67de3ad0eccace5211a44c511a1b93e7183e0d95
+++ packages/gtk-webcore/midori_0.0.4.bb	02453b1794116c17e282c8cce5aacd1375feeae2
@@ -1,7 +1,7 @@ LICENSE = "GPLv2"
 DESCRIPTION = "Midori is a lightweight web browser."
 LICENSE = "GPLv2"
 
-DEPENDS = "webkit libsexy" 
+DEPENDS = "webkit-gtk libsexy" 
 
 inherit autotools pkgconfig
 
============================================================
--- packages/openmoko2/openmoko-feedreader2_svn.bb	d843ad634a14cfaaa1ee7602130f9b1ace15dd7c
+++ packages/openmoko2/openmoko-feedreader2_svn.bb	f08e50dd63abd757d91d92c33789196eebe7128f
@@ -1,6 +1,6 @@ SECTION = "openmoko/apps"
 DESCRIPTION = "The OpenMoko Feed Reader"
 SECTION = "openmoko/apps"
-DEPENDS += "libmrss check webkit"
+DEPENDS += "libmrss check webkit-gtk"
 PV = "0.0.1+svn${SVNREV}"
 PR = "r0"
 
============================================================
--- packages/openssh/openssh_4.6p1.bb	59b74e2e06b33ac4b9f999bb6c689c636cdd7849
+++ packages/openssh/openssh_4.6p1.bb	af980ce34132a255f09adfcc9c6dca24ba3fa96a
@@ -16,7 +16,7 @@ LICENSE = "BSD"
 used to provide applications with a secure communication channel."
 HOMEPAGE = "http://www.openssh.org/"
 LICENSE = "BSD"
-PR = "r1"
+PR = "r2"
 
 SRC_URI = "ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-${PV}.tar.gz \
            file://sshd_config \
@@ -55,6 +55,7 @@ do_install_append() {
 	install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/sshd
 	mv ${D}${bindir}/scp ${D}${bindir}/scp.openssh
 	mv ${D}${bindir}/ssh ${D}${bindir}/ssh.openssh
+	rmdir ${D}/var/run/sshd ${D}/var/run ${D}/var
 }
 
 PACKAGES =+ " openssh-scp openssh-ssh openssh-sshd openssh-sftp openssh-misc"
@@ -62,7 +63,7 @@ FILES_openssh-sshd = "${sbindir}/sshd /$
 FILES_openssh-scp = "${bindir}/scp.${PN}"
 FILES_openssh-ssh = "${bindir}/ssh.${PN} ${bindir}/slogin /${sysconfdir}/ssh/ssh_config"
 FILES_openssh-sshd = "${sbindir}/sshd /${sysconfdir}/init.d/sshd ${bindir}/ssh-keygen"
-FILES_openssh-sshd += " /${sysconfdir}/ssh/moduli /${sysconfdir}/ssh/sshd_config /var/run/sshd"
+FILES_openssh-sshd += " /${sysconfdir}/ssh/moduli /${sysconfdir}/ssh/sshd_config"
 FILES_openssh-sftp = "${bindir}/sftp ${libdir}exec/sftp-server"
 FILES_openssh-misc = "${bindir}/ssh* ${libdir}exec/ssh*"
 
============================================================
--- packages/slugos-init/files/initscripts/zleds	edd8cca58c4f20772a52043f0c624d12da5c188a
+++ packages/slugos-init/files/initscripts/zleds	f0b04d6a1e54996a69d9478c9965d97a225e7566
@@ -21,8 +21,25 @@ state(){
 	esac
 }
 
+# trumpet "beeps" an announcement on systems with such support.
+l=120   # Long beep time
+s=40    # Try to keep a 3:1 ratio
+trumpet(){
+	case "$1" in
+	k)    leds beep -l $l; leds beep -l $s; leds beep -l $l;;
+	n)    leds beep -l $l; leds beep -l $s;;
+	*)    leds beep;;
+	esac
+}
+
 case "$1" in
-start)	leds "$(state "$runlevel")";;
-stop)	leds boot "$(state "$runlevel")";;
-*)	echo "led change: $1: command ignored" >&2;;
+start)	leds "$(state "$runlevel")"
+	if [ "$(state "$runlevel")" == "user" ]; then
+		trumpet "k"
+	fi
+	;;
+stop)	leds boot "$(state "$runlevel")"
+	;;
+*)	echo "led change: $1: command ignored" >&2
+	;;
 esac
============================================================
--- packages/slugos-init/slugos-init_0.10.bb	838d2b4d97516e7beb1501277067200126a20075
+++ packages/slugos-init/slugos-init_0.10.bb	b86dcf4eeaea00eac2b46b43ce047bfcb81bec2e
@@ -1,10 +1,10 @@ RDEPENDS = "busybox devio"
 DESCRIPTION = "SlugOS initial network config via sysconf"
 SECTION = "base"
 PRIORITY = "required"
 LICENSE = "GPL"
 DEPENDS = "base-files devio"
 RDEPENDS = "busybox devio"
-PR = "r87"
+PR = "r88"
 
 SRC_URI = "file://boot/flash \
 	   file://boot/disk \
============================================================
--- packages/uclibc/uclibc_svn.bb	b34e3bc8b7ac5e3131e17f86e2f08c38aba35130
+++ packages/uclibc/uclibc_svn.bb	92cb851f710f300b1521589a72e241b2b21569ad
@@ -6,7 +6,7 @@
 # UCLIBC_BASE can be set in a distro file, but whether this works depends
 # on whether the base patches apply to the selected (SRCDATE) svn release.
 #
-UCLIBC_BASE ?= "0.9.28"
+UCLIBC_BASE ?= "0.9.29"
 PV = "${UCLIBC_BASE}+svn${SRCDATE}"
 PR = "r5"
 
@@ -25,8 +25,13 @@ KERNEL_SOURCE = "${CROSS_DIR}/${TARGET_S
 #however: we can't depend on virtual/kernel when nptl hits due to depends deadlocking ....
 KERNEL_SOURCE = "${CROSS_DIR}/${TARGET_SYS}"
 
-SRC_URI += "svn://uclibc.org/trunk;module=uClibc"
+SRC_URI += "svn://uclibc.org/trunk;module=uClibc \
+            file://uClibc.machine \
+            file://uClibc.distro \
+            file://error_print_progname.patch;patch=1 \
+            file://select.diff;patch=1 \
+            "
 
-SRC_URI += " file://error_print_progname.patch;patch=1"
 S = "${WORKDIR}/uClibc"
 
+

More information about the Openembedded-commits mailing list