[oe-commits] org.oe.dev linux-omap2 git: add LED and NAND drivers
koen commit
oe at amethyst.openembedded.net
Fri May 30 12:38:30 UTC 2008
linux-omap2 git: add LED and NAND drivers
Author: koen at openembedded.org
Branch: org.openembedded.dev
Revision: 726109e6c0da43a9fbb35eb8190dbc9453853f1b
ViewMTN: http://monotone.openembedded.org/revision/info/726109e6c0da43a9fbb35eb8190dbc9453853f1b
Files:
1
packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch
packages/linux/linux-omap2-git/beagleboard/flash.patch
packages/linux/linux-omap2-git/beagleboard/defconfig
packages/linux/linux-omap2_git.bb
Diffs:
#
# mt diff -r578cd827b69f6514840962ec57d6933ed79521ab -r726109e6c0da43a9fbb35eb8190dbc9453853f1b
#
#
#
# add_file "packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch"
# content [b0b565d62f76114d9eb4ce37fc8e191699e6024c]
#
# add_file "packages/linux/linux-omap2-git/beagleboard/flash.patch"
# content [178d61ff76fbe7fffe3974d659d677439e070225]
#
# patch "packages/linux/linux-omap2-git/beagleboard/defconfig"
# from [2aafda9a94285e1f028bf5b138b0b60355509e06]
# to [271c624172d0bcd8bc3ff867a8392f34cd10bf47]
#
# patch "packages/linux/linux-omap2_git.bb"
# from [f974b6ddb18fc07f4c03a0dde33905f2e4345ed1]
# to [d636d3d58625d7d6926d41fa08350a1787650cb7]
#
============================================================
--- packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b0b565d62f76114d9eb4ce37fc8e191699e6024c
+++ packages/linux/linux-omap2-git/beagleboard/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b0b565d62f76114d9eb4ce37fc8e191699e6024c
@@ -0,0 +1,69 @@
+From 7a444ee080c5f1a62ac5042f1e7926622b3e1ce7 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen at openembedded.org>
+Date: Fri, 30 May 2008 13:43:36 +0200
+Subject: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+
+omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+ * on revision A5 and earlier board the two leds can't be controlled seperately, should be fixed in rev. B and C boards.
+
+Signed-off-by: Koen Kooi <koen at openembedded.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c | 28 ++++++++++++++++++++++++++++
+ 1 files changed, 28 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..83891fc 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -19,6 +19,7 @@
+ #include <linux/err.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
++#include <linux/leds.h>
+
+ #include <asm/hardware.h>
+ #include <asm/mach-types.h>
+@@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+ };
+
++struct gpio_led gpio_leds[] = {
++ {
++ .name = "beagleboard::led0",
++ .default_trigger = "none",
++ .gpio = 149,
++ },
++ {
++ .name = "beagleboard::led1",
++ .default_trigger = "none",
++ .gpio = 150,
++ },
++};
++
++static struct gpio_led_platform_data gpio_led_info = {
++ .leds = gpio_leds,
++ .num_leds = ARRAY_SIZE(gpio_leds),
++};
++
++static struct platform_device leds_gpio = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &gpio_led_info,
++ },
++};
++
+ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_beagle_uart_config },
+ { OMAP_TAG_MMC, &omap3beagle_mmc_config },
+@@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
+ #ifdef CONFIG_RTC_DRV_TWL4030
+ &omap3_beagle_twl4030rtc_device,
+ #endif
++ &leds_gpio,
+ };
+
+ static void __init omap3_beagle_init(void)
+--
+1.5.4.3
+
============================================================
--- packages/linux/linux-omap2-git/beagleboard/flash.patch 178d61ff76fbe7fffe3974d659d677439e070225
+++ packages/linux/linux-omap2-git/beagleboard/flash.patch 178d61ff76fbe7fffe3974d659d677439e070225
@@ -0,0 +1,558 @@
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 13d0043..d582b8f 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
+ board-omap3evm-flash.o
+ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
+ usb-musb.o usb-ehci.o \
+- hsmmc.o
++ hsmmc.o \
++ board-omap3beagle-flash.o
+ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
+ hsmmc.o \
+ usb-musb.o
+diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+new file mode 100644
+index 0000000..5346df0
+--- /dev/null
++++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c
+@@ -0,0 +1,119 @@
++/*
++ * board-omap3beagle-flash.c
++ *
++ * Copyright (c) 2008 Texas Instruments
++ *
++ * Modified from board-omap3evm-flash.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/nand.h>
++#include <linux/types.h>
++#include <linux/io.h>
++
++#include <asm/mach/flash.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpmc.h>
++#include <asm/arch/nand.h>
++
++#define GPMC_CS0_BASE 0x60
++#define GPMC_CS_SIZE 0x30
++
++static struct mtd_partition omap3beagle_nand_partitions[] = {
++ /* All the partition sizes are listed in terms of NAND block size */
++ {
++ .name = "X-Loader",
++ .offset = 0,
++ .size = 4*(64 * 2048),
++ .mask_flags = MTD_WRITEABLE, /* force read-only */
++ },
++ {
++ .name = "U-Boot",
++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
++ .size = 15*(64 * 2048),
++ .mask_flags = MTD_WRITEABLE, /* force read-only */
++ },
++ {
++ .name = "U-Boot Env",
++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
++ .size = 1*(64 * 2048),
++ },
++ {
++ .name = "Kernel",
++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
++ .size = 32*(64 * 2048),
++ },
++ {
++ .name = "File System",
++ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct omap_nand_platform_data omap3beagle_nand_data = {
++ .parts = omap3beagle_nand_partitions,
++ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
++ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
++ .nand_setup = NULL,
++ .dev_ready = NULL,
++};
++
++static struct resource omap3beagle_nand_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device omap3beagle_nand_device = {
++ .name = "omap2-nand",
++ .id = -1,
++ .dev = {
++ .platform_data = &omap3beagle_nand_data,
++ },
++ .num_resources = 1,
++ .resource = &omap3beagle_nand_resource,
++};
++
++
++void __init omap3beagle_flash_init(void)
++{
++ u8 cs = 0;
++ u8 nandcs = GPMC_CS_NUM + 1;
++
++ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
++
++ /* find out the chip-select on which NAND exists */
++ while (cs < GPMC_CS_NUM) {
++ u32 ret = 0;
++ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
++
++ if ((ret & 0xC00) == 0x800) {
++ printk(KERN_INFO "Found NAND on CS%d\n", cs);
++ if (nandcs > GPMC_CS_NUM)
++ nandcs = cs;
++ }
++ cs++;
++ }
++
++ if (nandcs > GPMC_CS_NUM) {
++ printk(KERN_INFO "NAND: Unable to find configuration "
++ "in GPMC\n ");
++ return;
++ }
++
++ if (nandcs < GPMC_CS_NUM) {
++ omap3beagle_nand_data.cs = nandcs;
++ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add +
++ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
++ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
++
++ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
++ if (platform_device_register(&omap3beagle_nand_device) < 0)
++ printk(KERN_ERR "Unable to register NAND device\n");
++ }
++}
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..99e042e 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void)
+ hsmmc_init();
+ usb_musb_init();
+ usb_ehci_init();
++ omap3beagle_flash_init();
+ }
+
+ arch_initcall(omap3_beagle_i2c_init);
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 3d5e432..02b9ced 100644
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA
+
+ config MTD_NAND_OMAP2
+ tristate "NAND Flash device on OMAP 2420H4/2430SDP boards"
+- depends on (ARM && ARCH_OMAP2 && MTD_NAND)
++ depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+ help
+ Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms.
+
+diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
+index 3b7307c..3aac1d2 100644
+--- a/drivers/mtd/nand/omap2.c
++++ b/drivers/mtd/nand/omap2.c
+@@ -111,15 +111,6 @@
+ static const char *part_probes[] = { "cmdlinepart", NULL };
+ #endif
+
+-static int hw_ecc = 1;
+-
+-/* new oob placement block for use with hardware ecc generation */
+-static struct nand_ecclayout omap_hw_eccoob = {
+- .eccbytes = 12,
+- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+- .oobfree = {{16, 32}, {33, 63} },
+-};
+-
+ struct omap_nand_info {
+ struct nand_hw_control controller;
+ struct omap_nand_platform_data *pdata;
+@@ -133,6 +124,13 @@ struct omap_nand_info {
+ void __iomem *gpmc_cs_baseaddr;
+ void __iomem *gpmc_baseaddr;
+ };
++
++/*
++ * omap_nand_wp - This function enable or disable the Write Protect feature on
++ * NAND device
++ * @mtd: MTD device structure
++ * @mode: WP ON/OFF
++ */
+ static void omap_nand_wp(struct mtd_info *mtd, int mode)
+ {
+ struct omap_nand_info *info = container_of(mtd,
+@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ }
+
+ /*
+-* omap_read_buf - read data from NAND controller into buffer
+-* @mtd: MTD device structure
+-* @buf: buffer to store date
+-* @len: number of bytes to read
+-*/
++ * omap_read_buf - read data from NAND controller into buffer
++ * @mtd: MTD device structure
++ * @buf: buffer to store date
++ * @len: number of bytes to read
++ */
+ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+ struct omap_nand_info *info = container_of(mtd,
+@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ }
+
+ /*
+-* omap_write_buf - write buffer to NAND controller
+-* @mtd: MTD device structure
+-* @buf: data buffer
+-* @len: number of bytes to write
+-*/
++ * omap_write_buf - write buffer to NAND controller
++ * @mtd: MTD device structure
++ * @buf: data buffer
++ * @len: number of bytes to write
++ */
+ static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ {
+ struct omap_nand_info *info = container_of(mtd,
+@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
+ return 0;
+ }
+
++#ifdef CONFIG_MTD_NAND_OMAP_HWECC
++/*
++ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller
++ * @mtd: MTD device structure
++ */
+ static void omap_hwecc_init(struct mtd_info *mtd)
+ {
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
++ register struct nand_chip *chip = mtd->priv;
+ unsigned long val = 0x0;
+
+ /* Read from ECC Control Register */
+@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd)
+
+ /* Read from ECC Size Config Register */
+ val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+- /* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */
+- val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F));
++ /* ECCSIZE1=512 | Select eccResultsize[0-3] */
++ val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
+ __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
+-
+-
+ }
+
+ /*
+- * This function will generate true ECC value, which can be used
++ * gen_true_ecc - This function will generate true ECC value, which can be used
+ * when correcting data read from NAND flash memory core
++ * @ecc_buf: buffer to store ecc code
+ */
+ static void gen_true_ecc(u8 *ecc_buf)
+ {
+@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf)
+ }
+
+ /*
+- * This function compares two ECC's and indicates if there is an error.
+- * If the error can be corrected it will be corrected to the buffer
++ * omap_compare_ecc - This function compares two ECC's and indicates if there
++ * is an error. If the error can be corrected it will be corrected to the
++ * buffer
++ * @ecc_data1: ecc code from nand spare area
++ * @ecc_data2: ecc code from hardware register obtained from hardware ecc
++ * @page_data: page data
+ */
+ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
+ u8 *ecc_data2, /* read from register */
+@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
+ }
+ }
+
++/*
++ * omap_correct_data - Compares the ecc read from nand spare area with ECC
++ * registers values and corrects one bit error if it has occured
++ * @mtd: MTD device structure
++ * @dat: page data
++ * @read_ecc: ecc read from nand flash
++ * @calc_ecc: ecc read from ECC registers
++ */
+ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ u_char * read_ecc, u_char * calc_ecc)
+ {
+@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat,
+ }
+
+ /*
+-** Generate non-inverted ECC bytes.
+-**
+-** Using noninverted ECC can be considered ugly since writing a blank
+-** page ie. padding will clear the ECC bytes. This is no problem as long
+-** nobody is trying to write data on the seemingly unused page.
+-**
+-** Reading an erased page will produce an ECC mismatch between
+-** generated and read ECC bytes that has to be dealt with separately.
+-*/
++ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
++ * Using noninverted ECC can be considered ugly since writing a blank
++ * page ie. padding will clear the ECC bytes. This is no problem as long
++ * nobody is trying to write data on the seemingly unused page. Reading
++ * an erased page will produce an ECC mismatch between generated and read
++ * ECC bytes that has to be dealt with separately.
++ * @mtd: MTD device structure
++ * @dat: The pointer to data on which ecc is computed
++ * @ecc_code: The ecc_code buffer
++ */
+ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+ {
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ unsigned long val = 0x0;
+- unsigned long reg, n;
+-
+- /* Ex NAND_ECC_HW12_2048 */
+- if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+- (info->nand.ecc.size == 2048))
+- n = 4;
+- else
+- n = 1;
++ unsigned long reg;
+
+ /* Start Reading from HW ECC1_Result = 0x200 */
+ reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
+- while (n--) {
+- val = __raw_readl(reg);
+- *ecc_code++ = val; /* P128e, ..., P1e */
+- *ecc_code++ = val >> 16; /* P128o, ..., P1o */
+- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+- reg += 4;
+- }
++ val = __raw_readl(reg);
++ *ecc_code++ = val; /* P128e, ..., P1e */
++ *ecc_code++ = val >> 16; /* P128o, ..., P1o */
++ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
++ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
++ reg += 4;
+
+ return 0;
+-} /* omap_calculate_ecc */
++}
+
++/*
++ * omap_enable_hwecc - This function enables the hardware ecc functionality
++ * @mtd: MTD device structure
++ * @mode: Read/Write mode
++ */
+ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+ {
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
++ register struct nand_chip *chip = mtd->priv;
++ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+
+ switch (mode) {
+ case NAND_ECC_READ :
+ __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */
+- val = (1 << 7) | (0x0) | (0x1) ;
++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ break;
+ case NAND_ECC_READSYN :
+- __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
+- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */
+- val = (1 << 7) | (0x0) | (0x1) ;
++ __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
++ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
++ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ break;
+ case NAND_ECC%s
>>> DIFF TRUNCATED @ 16K
More information about the Openembedded-commits
mailing list