[oe-commits] [Bug 5152] New: something bad around i2c, no sound, kernel 2.6.23, akita
bugzilla-daemon at amethyst.openembedded.net
bugzilla-daemon at amethyst.openembedded.net
Thu Jun 11 13:13:30 UTC 2009
http://bugs.openembedded.net/show_bug.cgi?id=5152
Summary: something bad around i2c, no sound, kernel 2.6.23,
akita
Classification: Unclassified
Product: Zaurus Kernel
Version: unspecified
Platform: ARM
OS/Version: Linux
Status: UNCONFIRMED
Severity: minor
Priority: P3
Component: C3xxx
AssignedTo: openembedded-commits at lists.openembedded.org
ReportedBy: flamemaniii at gmail.com
hello
i compiled 2.6.23-rp and i get strange error message about the i2c bus
connected to
* Akita IOEXP
* WM8750 audio chip
i can't use the sound card, also i see this in the dmesg
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c-gpio: probe failed: -19
(the full dmesg is attached below)
this the lsmod
anika akita-sound # lsmod
Module Size Used by
snd_soc_spitz 5740 0
snd_soc_wm8750 18864 1 snd_soc_spitz
snd_soc_pxa2xx 4480 1 snd_soc_spitz
snd_soc_core 26272 3 snd_soc_spitz,snd_soc_wm8750,snd_soc_pxa2xx
snd_soc_pxa2xx_i2s 3448 1 snd_soc_spitz
snd_pxa2xx_ac97 6508 0
snd_ac97_codec 102720 1 snd_pxa2xx_ac97
ac97_bus 2016 1 snd_ac97_codec
snd_pxa2xx_pcm 4704 1 snd_pxa2xx_ac97
snd_pcm 81925 5
snd_soc_pxa2xx,snd_soc_core,snd_pxa2xx_ac97,snd_ac97_codec,snd_pxa2xx_pcm
snd_timer 21860 1 snd_pcm
snd 52724 7
snd_soc_spitz,snd_soc_wm8750,snd_soc_core,snd_pxa2xx_ac97,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6756 1 snd
snd_page_alloc 6760 1 snd_pcm
dm9601 7488 0
usbnet 14854 1 dm9601
i see the alsamixer, i can set the volume
i see the soundcard0 listed by aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Spitz [Spitz], device 0: WM8750 WM8750-I2S-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
i see the sys class
ls /sys/class/i2c-adapter/i2c-0/
0-0018/ 0-001b/ device/ i2c-dev:i2c-0/ name
power/ subsystem/ uevent
i see this cat /sys/class/i2c-adapter/i2c-0/0-001*/name
akita-max7310
WM8750
but this is the error i get from sound apps
anika akita-sound # aplay -t wav M1F1-int16-AFsp.wav
Playing WAVE 'M1F1-int16-AFsp.wav' : Signed 16 bit Little Endian, Rate 8000 Hz,
Stereo
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
aplay: set_params:932: Broken configuration for this PCM: no configurations
available
anika akita-sound # mpg123 ../mp3/garbage--beautiful.mp3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layers 1, 2 and 3
version 1.7.3; written and copyright by Michael Hipp and others
free software (LGPL/GPL) without any warranty but with best wishes
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable
[alsa.c:180] error: get_formats_alsa(): no configuration available
[format.c:237] error: Unable to set up output format! Constraints: 44100, 22050
or 11025Hz.
[mpg123.c:942] error: Initial seek failed: Unable to set up output format!
(code 1)
So, you have trouble getting an output format... this is the matrix of
currently possible formats:
Audio driver: alsa
Audio device: <none>
Audio capabilities:
(matrix of [S]tereo or [M]ono support for sample format and rate in Hz)
| s16 | u16 | s32 | u32 | f32 | s8 | u8 | ulaw | alaw
|
------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
8000 | | | | | | | | |
|
11025 | | | | | | | | |
|
12000 | | | | | | | | |
|
16000 | | | | | | | | |
|
22050 | | | | | | | | |
|
24000 | | | | | | | | |
|
32000 | | | | | | | | |
|
44100 | | | | | | | | |
|
48000 | | | | | | | | |
|
Somehow the input data and your choices don't allow one of these.
any idea ?
dmesg
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists in Zone order. Total pages: 16256
Kernel command line: root=/dev/hda3 rootfstype=ext3 rootwait
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [tty0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60800KB available (3624K code, 337K data, 168K init)
Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4800000
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c Maxim max7310: init, platform driver register
i2c Maxim max7310: probe, add driver
i2c-core: driver [akita-max7310] registered
Time: oscr0 clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
Corgi Backlight Driver Initialized.
Console: switching to colour frame buffer device 80x30
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V
8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
0x00700000-0x04100000 : "Root Filesystem"
0x04100000-0x08000000 : "Home Filesystem"
usbmon: debugfs is not available
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
sl811: driver sl811-hcd, 19 May 2005
mice: PS/2 mouse device common for all mice
input: Spitz Keyboard as /class/input/input0
sharpsl_rc_init
sharpsl-remote-control sharpsl-remote-cont: sharpsl_rc_probe
input: Sharp Remote Control CE-RHX as /class/input/input1
input: Corgi Touchscreen as /class/input/input2
power.c: Adding power management to input layer
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c-gpio: probe failed: -19
Resetting I2C Controller Unit
: Enabling slave mode
: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fa0, IBMR=03
: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fa0, IBMR=03
: ICR now 00003f80, ISR 00000000
ICR 00003f80: scle iue GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-0: adapter [pxa_i2c-i2c.0] registered
i2c Maxim max7310: attach to the i2c adapter
i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x18
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=0
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
Resetting I2C Controller Unit
i2c-adapter i2c-0: Enabling slave mode
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fa0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fa0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003f80, ISR 00000000
ICR 00003f80: scle iue GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00002fc0, ISR 00000000
ICR 00002fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE SADIE ur
i2c Maxim max7310: detected as 8 Port expander for Extra GPIOs on the Akita
i2c-adapter i2c-0: client [akita-max7310] registered with bus id 0-0018
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c Maxim max7310: config
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000040, ICR=00003fe2,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-dev: adapter [pxa_i2c-i2c.0] registered as minor 0
I2C: i2c-0: PXA I2C adapter, slave address 1
Resetting I2C Controller Unit
: Enabling slave mode
: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fa0, IBMR=03
: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fa0, IBMR=03
: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fa0, IBMR=03
: ICR now 00003f80, ISR 00000000
ICR 00003f80: scle iue GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-1: adapter [pxa_i2c-i2c.1] registered
i2c Maxim max7310: attach to the i2c adapter
i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x18
i2c-adapter i2c-1: master_xfer[0] W, addr=0x18, len=0
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=02
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=00
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=00
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=00
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=00
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c-adapter i2c-1: setting to bus master
i2c-adapter i2c-1: state:i2c_pxa_handler:773: ISR=00000446, ICR=00002fe0,
IBMR=00
i2c-adapter i2c-1: state:i2c_pxa_irq_txempty:729: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: Retrying transmission
i2c: error: exhausted retries
i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
i2c: ICR: 00002fe0 ISR: 00000002
i2c: log: [00000446:00002fe0]
i2c-adapter i2c-1: state:i2c_pxa_set_slave:313: ISR=00000002, ICR=00002fe0,
IBMR=03
i2c-adapter i2c-1: ICR now 00002fc0, ISR 00000002
i2c-adapter i2c-1: ICR now 00002fc0, ISR 00000002
ICR 00002fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE SADIE ur
i2c-dev: adapter [pxa_i2c-i2c.1] registered as minor 1
I2C: i2c-1: PXA I2C adapter, slave address 1
Registered led device: spitz:amber
Registered led device: spitz:green
NET: Registered protocol family 26
IPv4 over IPv4 tunneling driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
usb 1-2: new full speed USB device using pxa27x-ohci and address 2
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
XScale iWMMXt coprocessor detected.
Probing IDE interface ide0...
mmc0: new SD card at address 8fe4
mmcblk0: mmc0:8fe4 SD02G 1931264KiB
mmcblk0: p1 p2 p3
usb 1-2: configuration #1 chosen from 1 choice
hda: HMS360404D5CF00, CFA DISK drive
ide0 at 0xc4820000-0xc4820007,0xc482000e on irq 169
hda: max request size: 128KiB
hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-cs: hda: Vpp = 0.0
sa1100-rtc sa1100-rtc: setting the system clock to 2009-06-11 10:34:49
(1244716489)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing init memory: 168K
eth0: register 'dm9601' at usb-pxa27x-2, Davicom DM9601 USB Ethernet,
00:60:78:05:8d:d8
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver dm9601
EXT3 FS on hda3, internal journal
Adding 250480k swap on /dev/hda2. Priority:-1 extents:1 across:250480k
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device eth0 entered promiscuous mode
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
i2c-adapter i2c-0: master_xfer[0] W, addr=0x18, len=2
i2c-adapter i2c-0: setting to bus master
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00002fe1,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fe8,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe0,
IBMR=01
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000004, ICR=00003fea,
IBMR=00
i2c-adapter i2c-0: state:i2c_pxa_handler:773: ISR=00000044, ICR=00003fe2,
IBMR=02
i2c-adapter i2c-0: state:i2c_pxa_irq_txempty:729: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_set_slave:313: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: state:i2c_pxa_wait_slave:284: ISR=00000000, ICR=00003fe0,
IBMR=03
i2c-adapter i2c-0: ICR now 00003fc0, ISR 00000000
ICR 00003fc0: scle IUE GCD ITEIE IRFIE BEIE SSDIE ALDIE SADIE ur
--
Configure bugmail: http://bugs.openembedded.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the Openembedded-commits
mailing list