[oe-commits] [Bug 5091] New: libvncserver fails to build

[bugzilla-daemon at amethyst.openembedded.net]

http://bugs.openembedded.net/show_bug.cgi?id=5091

           Summary: libvncserver fails to build
    Classification: Unclassified
           Product: Openembedded
           Version: Angstrom 2008.x
          Platform: Other
        OS/Version: other
            Status: NEW
          Severity: minor
          Priority: P3
         Component: org.openembedded.dev
        AssignedTo: openembedded-commits at lists.openembedded.org
        ReportedBy: d.venzano at motronica.com


libvncserver fails to build with the following error. I just did a bit-bake
libvncsrver and got the error reported below.

NOTE: package libvncserver-0.9-r2: task do_compile: started                     
ERROR: function do_compile failed                                               
ERROR: log data follows
(/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/work/armv6-angstrom-linux-gnueabi/libvncserver-0.9-r2/temp/log.do_compile.9407) 
| NOTE: make                                                                    
| make  all-recursive                                                           
| make[1]: Entering directory
`/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/work/armv6-angstrom-linux-gnueabi/libvncserver-0.9-r2/LibVNCServer-0.9' 
| Making all in libvncserver                                                    
| make[2]: Entering directory
`/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/work/armv6-angstrom-linux-gnueabi/libvncserver-0.9-r2/LibVNCServer-0.9/libvncserver' 
| /bin/sh ../libtool --tag=CC   --mode=compile arm-angstrom-linux-gnueabi-gcc
-march=armv6j -mtune=arm1136jf-s -mfpu=vfp -mfloat-abi=softfp -mthumb-interwork
-mno-thumb -DHAVE_CONFIG_H -I. -I..  
-isystem/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/staging/armv6-angstrom-linux-gnueabi/usr/include
-g -Wall -I ..
-isystem/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/staging/armv6-angstrom-linux-gnueabi/usr/include
-fexpensive-optimizations -frename-registers -fomit-frame-pointer -O2 -MT
main.lo -MD -MP -MF .deps/main.Tpo -c -o main.lo main.c                   
| ../libtool: line 463: CDPATH: command not found                               
| ../libtool: line 1141: func_opt_split: command not found                      
| libtool: Version mismatch error.  This is libtool 2.2.4, but the              
| libtool: definition of this LT_INIT comes from an older release.
| libtool: You should recreate aclocal.m4 with macros from libtool 2.2.4
| libtool: and run autoconf again.
| make[2]: *** [main.lo] Error 63
| make[2]: Leaving directory
`/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/work/armv6-angstrom-linux-gnueabi/libvncserver-0.9-r2/LibVNCServer-0.9/libvncserver'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory
`/mnt/altro/MeglioPlus/openembedded/stuff/build/tmp/work/armv6-angstrom-linux-gnueabi/libvncserver-0.9-r2/LibVNCServer-0.9'
| make: *** [all] Error 2
| FATAL: oe_runmake failed

-- 
Configure bugmail: http://bugs.openembedded.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.