[oe-commits] Martin Dietze : netbase: updated etc/network/interfaces files for mtx-[12] * since hostap and madwifi drivers are installed, the system will pick the config for whatever wlan card is found

[git version control]

Module: openembedded.git
Branch: org.openembedded.dev
Commit: 7cab51e1cf00e7c6d132b0a23ceb5cb20bfb47a2
URL:    http://gitweb.openembedded.net/?p=openembedded.git&a=commit;h=7cab51e1cf00e7c6d132b0a23ceb5cb20bfb47a2

Author: Martin Dietze <martin at the-little-red-haired-girl.org>
Date:   Sat May 23 13:09:56 2009 +0200

netbase: updated etc/network/interfaces files for mtx-[12] * since hostap and madwifi drivers are installed, the system will pick the config for whatever wlan card is found

---

 recipes/netbase/netbase/mtx-1/interfaces |   33 +++++++++++++++++++++++------
 recipes/netbase/netbase/mtx-2/interfaces |   33 +++++++++++++++++++++++------
 2 files changed, 52 insertions(+), 14 deletions(-)

diff --git a/recipes/netbase/netbase/mtx-1/interfaces b/recipes/netbase/netbase/mtx-1/interfaces
index a7c6da5..ae50a5c 100644
--- a/recipes/netbase/netbase/mtx-1/interfaces
+++ b/recipes/netbase/netbase/mtx-1/interfaces
@@ -1,24 +1,34 @@
 # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
  
-# The loopback interface
+# the loopback interface
 auto lo
 iface lo inet loopback
 
-# Ethernet
+# ethernet
 auto eth0
 iface eth0 inet dhcp
+	alias conf 192.168.0.250
 
-# wlan interface 1 for clients
-auto wlan0
+# auto is not needed for the wlan interfaces
+# - hotplug will ifup the interfaces automatically
+
+# first wlan interface for clients
 iface wlan0 inet static
 	address 10.0.0.1
 	netmask 255.0.0.0
 	wireless_mode master
 	wireless_essid cube-ap
 	wireless_channel 1
-	
-# wlan interface 2 for mesh
-auto wlan1
+
+iface ath0 inet static
+	address 10.0.0.1
+	netmask 255.0.0.0
+	wireless_standard g
+	wireless_mode master
+	wireless_essid cube-ap
+	wireless_channel 1
+
+# second wlan interface for mesh
 iface wlan1 inet static
 	address 172.16.0.1
 	netmask 255.240.0.0
@@ -27,3 +37,12 @@ iface wlan1 inet static
 	wireless_essid cube-mesh
 	wireless_channel 11
 	wireless_rts 250
+
+iface ath1 inet static
+	address 172.16.0.1
+	netmask 255.240.0.0
+	broadcast 172.31.255.255
+	wireless_mode ad-hoc
+	wireless_essid cube-mesh
+	wireless_channel 11
+	wireless_rts 250
diff --git a/recipes/netbase/netbase/mtx-2/interfaces b/recipes/netbase/netbase/mtx-2/interfaces
index a7c6da5..ae50a5c 100644
--- a/recipes/netbase/netbase/mtx-2/interfaces
+++ b/recipes/netbase/netbase/mtx-2/interfaces
@@ -1,24 +1,34 @@
 # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
  
-# The loopback interface
+# the loopback interface
 auto lo
 iface lo inet loopback
 
-# Ethernet
+# ethernet
 auto eth0
 iface eth0 inet dhcp
+	alias conf 192.168.0.250
 
-# wlan interface 1 for clients
-auto wlan0
+# auto is not needed for the wlan interfaces
+# - hotplug will ifup the interfaces automatically
+
+# first wlan interface for clients
 iface wlan0 inet static
 	address 10.0.0.1
 	netmask 255.0.0.0
 	wireless_mode master
 	wireless_essid cube-ap
 	wireless_channel 1
-	
-# wlan interface 2 for mesh
-auto wlan1
+
+iface ath0 inet static
+	address 10.0.0.1
+	netmask 255.0.0.0
+	wireless_standard g
+	wireless_mode master
+	wireless_essid cube-ap
+	wireless_channel 1
+
+# second wlan interface for mesh
 iface wlan1 inet static
 	address 172.16.0.1
 	netmask 255.240.0.0
@@ -27,3 +37,12 @@ iface wlan1 inet static
 	wireless_essid cube-mesh
 	wireless_channel 11
 	wireless_rts 250
+
+iface ath1 inet static
+	address 172.16.0.1
+	netmask 255.240.0.0
+	broadcast 172.31.255.255
+	wireless_mode ad-hoc
+	wireless_essid cube-mesh
+	wireless_channel 11
+	wireless_rts 250