[oe-commits] Roger Monk : angstrom-uboot-scripts: Add linuxtag demo script

[git version control]

Module: openembedded.git
Branch: org.openembedded.dev
Commit: 9b6418d9f32df4f5dffcacfcb09214d44b4b3a60
URL:    http://gitweb.openembedded.net/?p=openembedded.git&a=commit;h=9b6418d9f32df4f5dffcacfcb09214d44b4b3a60

Author: Roger Monk <r-monk at ti.com>
Date:   Wed May 26 23:49:23 2010 +0100

angstrom-uboot-scripts: Add linuxtag demo script

Signed-off-by: Roger Monk <r-monk at ti.com>
Signed-off-by: Koen Kooi <k-kooi at ti.com>

---

 .../angstrom-uboot-scripts/linuxtagdemo.cmd        |   37 ++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd b/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd
new file mode 100755
index 0000000..b232f79
--- /dev/null
+++ b/recipes/angstrom/angstrom-uboot-scripts/linuxtagdemo.cmd
@@ -0,0 +1,37 @@
+#setenv usbtty 'cdc_acm'
+#setenv mpurate '500'
+#setenv buddy 'none'
+
+#setenv vram '12M'
+#setenv defaultdisplay 'dvi'
+#setenv dvimode '640x480MR-16 at 60'
+
+setenv setbase 'setenv baseargs ${memmap} console=${console} mpurate=${mpurate} buddy=${buddy} vram=${vram} musb_hdrc.fifomode=${musbfifomode} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay}'
+
+setenv nandroot 'root=/dev/mtdblock4 rw rootfstype=jffs2'
+setenv nandargs 'run setbase; setenv bootargs ${baseargs} ${nandroot}'
+setenv nandloaduimage 'nand read ${loadaddr} 280000 400000'
+setenv nandboot 'run nandloadimage; bootm ${loadaddr}'
+
+setenv mmcroot 'root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait'
+setenv mmcargs 'run setbase; setenv bootargs ${baseargs} ${mmcroot}'
+setenv mmcloaduimage 'fatload mmc 0 ${loadaddr} uImage'
+setenv mmcboot 'run mmcloaduimage; bootm ${loadaddr}'
+
+echo Setting Specific Environment from MMC boot.scr
+
+# set musb to only use 8k for fifo memory - not necesary on xm, but safe anyway
+setenv musbfifomode '5'
+
+# mpurate is read from omap registers on omap3530 (which x-load has set to 600mhz?), on xm, uboot sets this to 1GHz
+#setenv mpurate '720'  
+setenv memmap 'mem=80M mem=128M at 0x88000000'
+setenv vram '16M omapfb.vram=0:8M,1:4M,2:4M'
+setenv defaultdisplay 'dvi'
+setenv dvimode 'hd720'
+#setenv dvimode '1280x720MR-32 at 60'
+
+run mmcargs
+printenv
+run mmcboot
+