[oe-commits] Stefan Schmidt : netbase: Add interface file for imote2 and bump PR

[git version control]

Module: openembedded.git
Branch: testing-next
Commit: d70dc036b73dd71332e5ff662280bbd8f3401c3b
URL:    http://gitweb.openembedded.net/?p=openembedded.git&a=commit;h=d70dc036b73dd71332e5ff662280bbd8f3401c3b

Author: Stefan Schmidt <stefan at datenfreihafen.org>
Date:   Tue Sep  7 13:07:25 2010 +0200

netbase: Add interface file for imote2 and bump PR

We need to set 'auto usb0' here to avoid some random kernel oops when trying to
to gadget_ethernet.

---

 recipes/netbase/netbase/imote2/interfaces |   84 +++++++++++++++++++++++++++++
 recipes/netbase/netbase_4.21.bb           |    2 +-
 2 files changed, 85 insertions(+), 1 deletions(-)

diff --git a/recipes/netbase/netbase/imote2/interfaces b/recipes/netbase/netbase/imote2/interfaces
new file mode 100644
index 0000000..74de501
--- /dev/null
+++ b/recipes/netbase/netbase/imote2/interfaces
@@ -0,0 +1,84 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+# Wireless interfaces
+#
+# Example of an unencrypted (no WEP or WPA) wireless connection
+# that connects to any available access point:
+#
+iface wlan0 inet dhcp
+	wireless_mode managed
+	wireless_essid any
+#
+#
+# Same as above but locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#	wireless_mode managed
+#	wireless-essid some-essid
+#
+# A WEP encrypted connection locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#	wireless-essid some-essid
+#	wireless-key s:My-PlainText-Password
+#	wireless-mode managed                  
+#
+# A WPA1 or WPA2 encrypted connection locked to a specific access point.
+# This is the best option for non-roaming, single-network usage.
+# Note that your card may require a firmware update to use WPA. 
+# Some distributions install a temporary volatile firmware update on ifup.
+#
+#iface wlan0 inet dhcp                                                   
+#	wpa-essid some-essid                                          
+#	wpa-psk My-PlainText-Password                                              
+#
+# A WPA1 or WPA2 encrypted connection using an external configuration file
+# for wpa-supplicant. This is the way to go if you need to configure multiple
+# networks with different keys and / or WPA settings and roaming support.
+#
+# iface wlan0 inet dhcp
+#    wpa-conf /etc/wpa_supplicant.conf
+#    wpa-driver hostap
+
+
+
+iface atml0 inet dhcp
+
+# Wired or wireless interfaces
+auto eth0
+iface eth0 inet dhcp
+iface eth1 inet dhcp
+
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+auto usb0
+iface usb0 inet static
+	address 192.168.0.202
+	netmask 255.255.255.0
+	network 192.168.0.0
+	gateway 192.168.0.200
+
+
+# Zaurus 2.4 Lineo net_fd; obsolete
+iface usbd0 inet static
+	address 192.168.129.201
+	netmask 255.255.255.0
+	network 192.168.129.0
+	gateway 192.168.129.200
+
+# iPAQ 2.4 mach-sa1100/usb-eth
+# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP)
+iface usbf inet static
+        address 192.168.0.202
+        netmask 255.255.255.0
+        network 192.168.0.0
+        gateway 192.168.0.200
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+
diff --git a/recipes/netbase/netbase_4.21.bb b/recipes/netbase/netbase_4.21.bb
index 9938d6e..311f8c7 100644
--- a/recipes/netbase/netbase_4.21.bb
+++ b/recipes/netbase/netbase_4.21.bb
@@ -2,7 +2,7 @@ DESCRIPTION = "This package provides the necessary \
 infrastructure for basic TCP/IP based networking."
 SECTION = "base"
 LICENSE = "GPLv2"
-PR = "r44"
+PR = "r45"
 
 inherit update-rc.d