[oe-commits] Ulf Samuelsson : Add /etc/net/interfaces for at91sam9m10ekes

[git version control]

Module: openembedded.git
Branch: ulf/linux-2.6.30-2011-01-16
Commit: 1b19f9c727a53bfc5972fe50636409bb68c868ce
URL:    http://gitweb.openembedded.net/?p=openembedded.git&a=commit;h=1b19f9c727a53bfc5972fe50636409bb68c868ce

Author: Ulf Samuelsson <ulf.samuelsson at atmel.com>
Date:   Mon Feb 28 09:52:47 2011 +0100

Add /etc/net/interfaces for at91sam9m10ekes

---

 recipes/netbase/netbase/at91sam9m10ekes/interfaces |   91 ++++++++++++++++++++
 1 files changed, 91 insertions(+), 0 deletions(-)

diff --git a/recipes/netbase/netbase/at91sam9m10ekes/interfaces b/recipes/netbase/netbase/at91sam9m10ekes/interfaces
new file mode 100644
index 0000000..c0bd147
--- /dev/null
+++ b/recipes/netbase/netbase/at91sam9m10ekes/interfaces
@@ -0,0 +1,91 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+ 
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+# Wireless interfaces
+#
+# Example of an unencrypted (no WEP or WPA) wireless connection
+# that connects to any available access point:
+#
+auto owl0
+
+iface owl0 inet dhcp
+	wireless_mode managed
+	wireless_essid any
+#	wireless_essid	ESSNAME
+#	wireless_key	ESSKEY [1] key [1] key restricted
+	hostname at91sam9m10ekes
+
+#
+#
+# Same as above but locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#	wireless_mode managed
+#	wireless-essid some-essid
+#
+# A WEP encrypted connection locked to a specific access point:
+#
+#iface wlan0 inet dhcp  
+#	wireless-essid some-essid
+#	wireless-key s:My-PlainText-Password
+#	wireless-mode managed                  
+#
+# A WPA1 or WPA2 encrypted connection locked to a specific access point.
+# This is the best option for non-roaming, single-network usage.
+# Note that your card may require a firmware update to use WPA. 
+# Some distributions install a temporary volatile firmware update on ifup.
+#
+#iface wlan0 inet dhcp                                                   
+#	wpa-essid some-essid                                          
+#	wpa-psk My-PlainText-Password                                              
+#
+# A WPA1 or WPA2 encrypted connection using an external configuration file
+# for wpa-supplicant. This is the way to go if you need to configure multiple
+# networks with different keys and / or WPA settings and roaming support.
+#
+# iface wlan0 inet dhcp
+#    wpa-conf /etc/wpa_supplicant.conf
+#    wpa-driver hostap
+
+
+
+iface atml0 inet dhcp
+
+# Wired or wireless interfaces
+auto eth0
+
+iface eth0 inet dhcp
+iface eth1 inet dhcp
+
+
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+iface usb0 inet static
+	address 192.168.0.202
+	netmask 255.255.255.0
+	network 192.168.0.0
+	gateway 192.168.0.200
+
+
+# Zaurus 2.4 Lineo net_fd; obsolete
+iface usbd0 inet static
+	address 192.168.129.201
+	netmask 255.255.255.0
+	network 192.168.129.0
+	gateway 192.168.129.200
+
+# iPAQ 2.4 mach-sa1100/usb-eth
+# (192.168.0.202 is the iPAQ's IP, 192.168.0.200 is the host's IP)
+iface usbf inet static
+	address 192.168.0.202
+	netmask 255.255.255.0
+	network 192.168.0.0
+	gateway 192.168.0.200
+
+# Bluetooth networking
+iface bnep0 inet dhcp
+