[oe-commits] Koen Kooi : u-boot git: update beagleboard u-boot to 2011.03-RC

[git version control]

Module: openembedded.git
Branch: 2011.03-maintenance
Commit: a5e778e7a366d21b28e80d7698375a0f515f41e5
URL:    http://gitweb.openembedded.net/?p=openembedded.git&a=commit;h=a5e778e7a366d21b28e80d7698375a0f515f41e5

Author: Koen Kooi <koen at openembedded.org>
Date:   Wed Mar  9 14:14:19 2011 +0100

u-boot git: update beagleboard u-boot to 2011.03-RC

[Koen 20110317] Removed 0015-omap3_beagle-Switch-default-console-from-ttyS2-to-tt.patch since 2011.03-maintenance is still using the old 2.6.32 kernel for beagleboard

Signed-off-by: Koen Kooi <koen at openembedded.org>

---

 .../0001-Enable-I2C-bus-switching.patch            |   49 --
 ...-Beagle-Pin-Mux-initialization-glitch-fix.patch |   46 ++
 ...omapfb.debug-y-from-Beagle-and-Overo-env.patch} |   21 +-
 ...P3-add-board-revision-detection-for-Overo.patch |  187 -----
 ...e-Beagle-revision-detection-to-recognize-.patch |  165 ----
 ...e-enable-the-use-of-a-plain-text-file-nam.patch |   89 +++
 ...-OMAP3-BeagleBoard-Enable-pullups-on-i2c2.patch |   69 ++
 ...AUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch |  143 ----
 ...MAP3-BeagleBoard-add-xM-rev-B-to-ID-table.patch |  111 +++
 ...ntry-for-rev-3.1.2-check-and-display-max-.patch |  105 ---
 ...3-BeagleBoard-add-more-expansionboard-IDs.patch |   95 +++
 ...add-mpurate-boot-arg-for-overo-and-beagle.patch |   70 --
 ...h => 0007-OMAP3-Add-DSS-driver-for-OMAP3.patch} |  396 ++++++----
 ...t-expansion-board-type-version-using-eepr.patch |  129 ---
 ...008-BeagleBoard-Added-userbutton-command.patch} |   31 +-
 ...-enable-config-eeprom-to-set-u-boot-env-v.patch |   81 --
 ...-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch |   34 -
 ...agle-pass-expansionboard-name-in-bootargs.patch |   57 ++
 .../0010-Enable-DSS-driver-for-Beagle.patch        |  107 +++
 ...-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch |   25 -
 .../beagleboard/0011-Add-led-command.patch         |  213 +++++
 ...rim-excessively-long-delays-in-i2c-driver.patch |   52 --
 ...tch => 0012-BeagleBoard-Added-LED-driver.patch} |   36 +-
 ...-allow-expansion-boards-with-any-vendor-I.patch |   47 --
 ...BeagleBoard-updated-default-configuration.patch |  184 +++++
 ...-change-address-of-expansion-eeprom-to-0x.patch |   25 -
 ...ED-name-match-finding-avoiding-extraneous.patch |   42 +
 ....c-don-t-attempt-to-set-up-second-RAM-ban.patch |   49 --
 .../0015-OMAP3-mem.c-enhance-the-RAM-test.patch    |   52 --
 ...e-Switch-default-console-from-ttyS2-to-tt.patch |   29 +
 ...gleBoard-Load-kernel-via-MMC-ext2-not-fat.patch |   26 +
 ...d.c-fail-gracefully-if-no-nand-is-present.patch |   27 -
 ...efinitions-to-support-sysinfo-cpu-and-cpu.patch |   68 --
 ...s_info-update-cpu-detection-for-36XX-37XX.patch |  196 -----
 ...3-clocks-update-clock-setup-for-36XX-37XX.patch |  826 --------------------
 ...20-OMAP3-beagle-add-support-for-Beagle-xM.patch |  137 ----
 ...e-implement-expansionboard-detection-base.patch |  157 ----
 ...-display-message-about-I2C-errors-being-e.patch |   26 -
 ...24-beagleboard-fix-TCT-expansionboard-IDs.patch |   27 -
 .../0026-Enable-DSS-driver-for-Beagle.patch        |  158 ----
 ...ardXM-don-t-set-mpurate-on-xM-in-bootargs.patch |   24 -
 ...nd-clean-up-L2-cache-enable-disable-funct.patch |  112 ---
 ...029-OMAP3-convert-setup_auxcr-to-pure-asm.patch |   99 ---
 ...-Cortex-A8-errata-workarounds-only-on-aff.patch |   46 --
 ...e-add-more-expansionboards-based-on-http-.patch |   61 --
 ...e-set-mpurate-to-600-for-revB-and-revC1-3.patch |   29 -
 ...gle-prettify-expansionboard-message-a-bit.patch |   25 -
 ...e-add-pinmux-for-Tincantools-Trainer-expa.patch |   53 --
 ...5-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch |   24 -
 ...e-decrease-bootdelay-to-3-use-VGA-for-def.patch |   34 -
 ...agle-pass-expansionboard-name-in-bootargs.patch |   87 --
 ...8-Added-configurations-for-xM-Rev-A-board.patch |   29 -
 ...e-setenv-beaglerev-for-AxBx-Cx-xMA-for-be.patch |   42 -
 ...d-support-for-second-and-third-mmc-channe.patch |  126 ---
 ...e-enable-support-for-second-and-third-mmc.patch |   55 --
 .../beagleboard/0043-Add-led-command.patch         |  256 ------
 .../0044-BeagleBoard-Enabled-LEDs.patch            |   47 --
 ...eagleBoard-Add-CONFIG_SYS_MEMTEST_SCRATCH.patch |   35 -
 ...eBoard-Adjust-boot-command-on-USER-button.patch |  115 ---
 .../0048-BeagleBoard-Enable-pullups-on-i2c2.patch  |   46 --
 ...eagleBoard-Add-camera-to-default-bootargs.patch |   49 --
 .../0050-BeagleBoard-move-ramdisk-parameters.patch |   38 -
 ...pport-for-beagleboardtoys-expansionboards.patch |   74 --
 recipes/u-boot/u-boot_git.bb                       |   72 +--
 64 files changed, 1370 insertions(+), 4595 deletions(-)

Diff:   http://gitweb.openembedded.net/?p=openembedded.git/?a=commitdiff;h=a5e778e7a366d21b28e80d7698375a0f515f41e5