[oe-commits] Mark Hatle : package_rpm: Verify that the package manifests are not empty
git at git.openembedded.org
git at git.openembedded.org
Tue Jun 12 10:13:05 UTC 2012
Module: openembedded-core.git
Branch: master
Commit: 9b115181a8b10ec1eb8eac355405695f63e2e011
URL: http://git.openembedded.org/?p=openembedded-core.git&a=commit;h=9b115181a8b10ec1eb8eac355405695f63e2e011
Author: Mark Hatle <mark.hatle at windriver.com>
Date: Mon Jun 11 13:18:59 2012 -0500
package_rpm: Verify that the package manifests are not empty
An empty manifest will cause a failure condition. We ensure that any install
actions occur only with a manifest larger then size 0. Also ensure that padding
is added to the end of the manifest, instead of the beginning to enable this
size check. (Padding is required for very small manifest files..)
Signed-off-by: Mark Hatle <mark.hatle at windriver.com>
Signed-off-by: Richard Purdie <richard.purdie at linuxfoundation.org>
---
meta/classes/package_rpm.bbclass | 59 ++++++++++++++++++++++----------------
1 files changed, 34 insertions(+), 25 deletions(-)
diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass
index b84c044..d5406c2 100644
--- a/meta/classes/package_rpm.bbclass
+++ b/meta/classes/package_rpm.bbclass
@@ -182,6 +182,7 @@ rpm_update_pkg () {
# been run by now, so don't have to run them(preun, postun, etc.) when
# erase the pkg
if [ -s ${target_rootfs}/install/remove.manifest ]; then
+ echo "# Remove manifest padding...." >> ${target_rootfs}/install/remove.manifest
rpm_common_comand --noscripts --nodeps \
-e `cat ${target_rootfs}/install/remove.manifest`
fi
@@ -249,7 +250,7 @@ package_install_internal_rpm () {
# Setup manifest of packages to install...
mkdir -p ${target_rootfs}/install
- echo "# Install manifest" > ${target_rootfs}/install/install.manifest
+ rm -f ${target_rootfs}/install/install.manifest
# Uclibc builds don't provide this stuff...
if [ x${TARGET_OS} = "xlinux" ] || [ x${TARGET_OS} = "xlinux-gnueabi" ] ; then
@@ -309,12 +310,15 @@ package_install_internal_rpm () {
# Generate an install solution by doing a --justdb install, then recreate it with
# an actual package install!
- ${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
- --predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
- -D "_dbpath ${target_rootfs}/install" -D "`cat ${confbase}-base_archs.macro`" \
- -D "__dbi_txn create nofsync" \
- -U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
- ${target_rootfs}/install/install.manifest
+ if [ -s ${target_rootfs}/install/install.manifest ]; then
+ echo "# Install manifest padding" >> ${target_rootfs}/install/install.manifest
+ ${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
+ --predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
+ -D "_dbpath ${target_rootfs}/install" -D "`cat ${confbase}-base_archs.macro`" \
+ -D "__dbi_txn create nofsync" \
+ -U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
+ ${target_rootfs}/install/install.manifest
+ fi
if [ ! -z "${package_attemptonly}" ]; then
echo "Adding attempt only packages..."
@@ -407,8 +411,9 @@ package_install_internal_rpm () {
touch ${target_rootfs}/install/install_multilib_solution.manifest
- if [ -e "${target_rootfs}/install/install_multilib.manifest" ]; then
+ if [ -s "${target_rootfs}/install/install_multilib.manifest" ]; then
# multilib package installation
+ echo "# Install multilib manifest padding" >> ${target_rootfs}/install/install_multilib.manifest
# Generate an install solution by doing a --justdb install, then recreate it with
# an actual package install!
@@ -493,33 +498,37 @@ EOF
if [ "${INC_RPM_IMAGE_GEN}" = "1" -a -f "$pre_btmanifest" ]; then
echo "Skipping pre install due to exisitng image"
else
- echo "# Initial Install manifest" > ${target_rootfs}/install/initial_install.manifest
+ rm -f ${target_rootfs}/install/initial_install.manifest
echo "Installing base dependencies first (base-passwd, base-files and shadow) since rpm is special"
grep /base-passwd-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
grep /base-files-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
grep /shadow-[0-9] ${target_rootfs}/install/total_solution.manifest >> ${target_rootfs}/install/initial_install.manifest || true
- # Generate an install solution by doing a --justdb install, then recreate it with
- # an actual package install!
- mkdir -p ${target_rootfs}/initial
+ if [ -s ${target_rootfs}/install/initial_install.manifest ]; then
+ echo "# Initial Install manifest padding..." >> ${target_rootfs}/install/initial_install.manifest
- ${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
- --predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
- -D "_dbpath ${target_rootfs}/initial" -D "`cat ${confbase}.macro`" \
- -D "__dbi_txn create nofsync" \
- -U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
- ${target_rootfs}/install/initial_install.manifest
+ # Generate an install solution by doing a --justdb install, then recreate it with
+ # an actual package install!
+ mkdir -p ${target_rootfs}/initial
- ${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf "%{packageorigin}\n" \
- -D "__dbi_txn create nofsync private" \
- > ${target_rootfs}/install/initial_solution.manifest
+ ${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \
+ --predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \
+ -D "_dbpath ${target_rootfs}/initial" -D "`cat ${confbase}.macro`" \
+ -D "__dbi_txn create nofsync" \
+ -U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \
+ ${target_rootfs}/install/initial_install.manifest
+
+ ${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf "%{packageorigin}\n" \
+ -D "__dbi_txn create nofsync private" \
+ > ${target_rootfs}/install/initial_solution.manifest
- rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest
+ rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest
- grep -Fv -f ${target_rootfs}/install/initial_solution.manifest ${target_rootfs}/install/total_solution.manifest > ${target_rootfs}/install/total_solution.manifest.new
- mv ${target_rootfs}/install/total_solution.manifest.new ${target_rootfs}/install/total_solution.manifest
+ grep -Fv -f ${target_rootfs}/install/initial_solution.manifest ${target_rootfs}/install/total_solution.manifest > ${target_rootfs}/install/total_solution.manifest.new
+ mv ${target_rootfs}/install/total_solution.manifest.new ${target_rootfs}/install/total_solution.manifest
- rm -rf ${target_rootfs}/initial
+ rm -rf ${target_rootfs}/initial
+ fi
fi
echo "Installing main solution manifest (${target_rootfs}/install/total_solution.manifest)"
More information about the Openembedded-commits
mailing list