[oe-commits] Denys Dmytriyenko : udev: update init script for conditional probing of platform bus

[git at git.openembedded.org]

Module: openembedded-core.git
Branch: master
Commit: 70a695735e0a7d14448f2f5a9986bfe105210a91
URL:    http://git.openembedded.org/?p=openembedded-core.git&a=commit;h=70a695735e0a7d14448f2f5a9986bfe105210a91

Author: Denys Dmytriyenko <denys at ti.com>
Date:   Thu Jun 19 18:53:22 2014 -0400

udev: update init script for conditional probing of platform bus

Make probing of "platform" bus conditional based on PROBE_PLATFORM_BUS
variable from /etc/default/udev-cache on subsequent boots when udev
cache is used. PROBE_PLATFORM_BUS has to be set to "yes" in order to
force probing on every boot, otherwise it uses the old default behaviour
of probing it just the first time.

This is helpful on modern SoCs where most of the low level peripheral
drivers are registered on the platform bus and need to be probed to load
the necessary modules and enable the connected buses and subsystems.

Signed-off-by: Denys Dmytriyenko <denys at ti.com>
Signed-off-by: Richard Purdie <richard.purdie at linuxfoundation.org>

---

 meta/recipes-core/udev/udev/init | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/meta/recipes-core/udev/udev/init b/meta/recipes-core/udev/udev/init
index 410a650..f2c84d5 100644
--- a/meta/recipes-core/udev/udev/init
+++ b/meta/recipes-core/udev/udev/init
@@ -102,7 +102,12 @@ case "$1" in
 
     udevadm control --env=STARTUP=1
     if [ "$not_first_boot" != "" ];then
-            udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus  --subsystem-nomatch=graphics	 --subsystem-nomatch=backlight --subsystem-nomatch=video4linux	--subsystem-nomatch=platform
+            if [ "$PROBE_PLATFORM_BUS" != "yes" ]; then
+                PLATFORM_BUS_NOMATCH="--subsystem-nomatch=platform"
+            else
+                PLATFORM_BUS_NOMATCH=""
+            fi
+            udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux $PLATFORM_BUS_NOMATCH
             (udevadm settle --timeout=3; udevadm control --env=STARTUP=)&
     else
             udevadm trigger --action=add