[oe-commits] [openembedded-core] 53/56: linux-yocto:4.4: broxton backports

git at git.openembedded.org git at git.openembedded.org
Mon May 30 08:39:16 UTC 2016


rpurdie pushed a commit to branch master-next
in repository openembedded-core.

commit 11a30a6757f6bc0cc5d6705b753b5d1726ba7ca2
Author: Bruce Ashfield <bruce.ashfield at windriver.com>
AuthorDate: Fri May 27 10:32:20 2016 -0400

    linux-yocto:4.4: broxton backports
    
    Integrating the following mainline backports for better Broxton
    support:
    
    Adrian Hunter (3):
          mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
          mmc: mmc: Attempt to flush cache before reset
          mmc: mmc: Fix partition switch timeout for some eMMCs
    
    Andy Shevchenko (12):
          device property: always check for fwnode type
          device property: rename helper functions
          device property: refactor built-in properties support
          device property: keep single value inplace
          device property: improve readability of macros
          device property: return -EINVAL when property isn't found in ACPI
          device property: Fallback to secondary fwnode if primary misses the property
          mfd: core: propagate device properties to sub devices drivers
          mfd: intel-lpss: Pass HSUART configuration via properties
          device property: avoid allocations of 0 length
          lib/string: introduce match_string() helper
          device property: convert to use match_string() helper
    
    Bamvor Jian Zhang (1):
          gpiolib: do not allow to insert an empty gpiochip
    
    Christophe RICARD (2):
          ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
          ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
    
    Dasaratharaman Chandramouli (1):
          intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
    
    Gwendal Grignou (1):
          mmc: core: Do regular power cycle when lacking eMMC HW reset support
    
    Heikki Krogerus (4):
          device property: helper macros for property entry creation
          device property: the secondary fwnode needs to depend on the primary
          device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
          device property: fix for a case of use-after-free
    
    Len Brown (2):
          intel_idle: Add SKX support
          intel_idle: add BXT support
    
    Linus Walleij (1):
          Revert "gpio: revert get() to non-errorprogating behaviour"
    
    Mika Westerberg (7):
          pwm: lpss: Remove ->free() callback
          pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
          device property: Take a copy of the property set
          driver core: platform: Add support for built-in device properties
          mfd: intel-lpss: Add support for passing device properties
          mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
          mfd: intel-lpss: Pass I2C configuration via properties on BXT
    
    Qipeng Zha (1):
          pinctrl: intel: make the high level interrupt working
    
    Richard Cochran (10):
          intel_idle: remove useless return from void function.
          intel_idle: Fix a helper function's return value.
          intel_idle: Remove redundant initialization calls.
          intel_idle: Fix deallocation order on the driver exit path.
          intel_idle: Fix dangling registration on error path.
          intel_idle: Avoid a double free of the per-CPU data.
          intel_idle: Setup the timer broadcast only on successful driver load.
          intel_idle: Don't overreact to a cpuidle registration failure.
          intel_idle: Propagate hot plug errors.
          intel_idle: Clean up all registered devices on exit.
    
    Wolfram Sang (1):
          mmc: make MAN_BKOPS_EN message a debug
    
    qipeng.zha (1):
          pwm: lpss: Update PWM setting for Broxton
    
    Signed-off-by: California Sullivan <california.l.sullivan at intel.com>
    Signed-off-by: Bruce Ashfield <bruce.ashfield at windriver.com>
    Signed-off-by: Richard Purdie <richard.purdie at linuxfoundation.org>
---
 meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb   |  2 +-
 meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb |  2 +-
 meta/recipes-kernel/linux/linux-yocto_4.4.bb      | 16 ++++++++--------
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb b/meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb
index f57ead8..a6f7dcc 100644
--- a/meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-rt_4.4.bb
@@ -11,7 +11,7 @@ python () {
         raise bb.parse.SkipPackage("Set PREFERRED_PROVIDER_virtual/kernel to linux-yocto-rt to enable it")
 }
 
-SRCREV_machine ?= "bf2fbe7f2cdf44fc69e50fefbfdd58d41a03733a"
+SRCREV_machine ?= "3bdc347cc2087a0217e3acddccda5bb775cd570b"
 SRCREV_meta ?= "6ec93aaa70f838b551f58b91d0c6ffeff6f6094b"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-4.4.git;branch=${KBRANCH};name=machine \
diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb b/meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb
index da88451..e05b27a 100644
--- a/meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-tiny_4.4.bb
@@ -9,7 +9,7 @@ LINUX_VERSION ?= "4.4.11"
 KMETA = "kernel-meta"
 KCONF_BSP_AUDIT_LEVEL = "2"
 
-SRCREV_machine ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
+SRCREV_machine ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
 SRCREV_meta ?= "6ec93aaa70f838b551f58b91d0c6ffeff6f6094b"
 
 PV = "${LINUX_VERSION}+git${SRCPV}"
diff --git a/meta/recipes-kernel/linux/linux-yocto_4.4.bb b/meta/recipes-kernel/linux/linux-yocto_4.4.bb
index 4306bf8..984a49c 100644
--- a/meta/recipes-kernel/linux/linux-yocto_4.4.bb
+++ b/meta/recipes-kernel/linux/linux-yocto_4.4.bb
@@ -11,14 +11,14 @@ KBRANCH_qemux86  ?= "standard/base"
 KBRANCH_qemux86-64 ?= "standard/base"
 KBRANCH_qemumips64 ?= "standard/mti-malta64"
 
-SRCREV_machine_qemuarm ?= "97c21d0b5ffa8eb1cb27a6f81b52ec53182ae087"
-SRCREV_machine_qemuarm64 ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
-SRCREV_machine_qemumips ?= "8763860e4da46b3cb1551e09d9ca46eedd2dd91a"
-SRCREV_machine_qemuppc ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
-SRCREV_machine_qemux86 ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
-SRCREV_machine_qemux86-64 ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
-SRCREV_machine_qemumips64 ?= "8974d9741cbcb21bf50ab49a6257e5773415fa5f"
-SRCREV_machine ?= "628bf627561c6285d99fb978e11d4c15fc29324b"
+SRCREV_machine_qemuarm ?= "b74c7523581ab748dfe475af384fcb40c4542d31"
+SRCREV_machine_qemuarm64 ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
+SRCREV_machine_qemumips ?= "f5f23899a4afb7f095a480652edc082d6bd545b2"
+SRCREV_machine_qemuppc ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
+SRCREV_machine_qemux86 ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
+SRCREV_machine_qemux86-64 ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
+SRCREV_machine_qemumips64 ?= "7ce6e58742b2f1f79cc8b1a1fff8bc408a3b585e"
+SRCREV_machine ?= "53e84104c5e68eb468823dd0d262a64623d01a55"
 SRCREV_meta ?= "6ec93aaa70f838b551f58b91d0c6ffeff6f6094b"
 
 SRC_URI = "git://git.yoctoproject.org/linux-yocto-4.4.git;name=machine;branch=${KBRANCH}; \

-- 
To stop receiving notification emails like this one, please contact
the administrator of this repository.


More information about the Openembedded-commits mailing list