[oe-commits] [openembedded-core] 09/26: dbus-test_1.12.2: various fixes

[git at git.openembedded.org]

This is an automated email from the git hooks/post-receive script.

rpurdie pushed a commit to branch master-next
in repository openembedded-core.

commit 1ec108f912b4ea7662d0a491f84a6a2cb4825c40
Author: Juro Bystricky <juro.bystricky at intel.com>
AuthorDate: Tue Feb 27 12:19:26 2018 -0800

    dbus-test_1.12.2: various fixes
    
    The result of running dbus-test-ptest was a series of
    various segfaults, interpreted as FAILs. This was a direct consequence
    of the test suite loading the installed shared library libdbus-1.so, not the
    one built along the test suite.
    
    While we normally want to test against the installed libraries, we cannot
    do this in this case as the test suite expects a library that is configured/compiled
    differently from the installed one. We could configure the installed library
    identically as the test suite expects, (and there should be no issues), however
    this is not desirable for performance reasons.
    
    Hence we need to use the library built along with the test suite.
    Of course, running the test suite against its own library does not
    test the installed library, however they are both built from the same
    sources so that can give us some kind of indication.
    
    The following changes were made:
    
    1. Configure the test library as close as possible to the installed one,
       with some additional configuration options that are needed for testing.
       (Use dbus_1.12.2.bb recipe as a template)
    2. Include the shared libraries in the package, use LD_LIBRARY_PATH during
       testing to load them instead of the installed ones.
    3. Add a few more tests. (There are still some additional tests built that
       are not used, but they would have to be special-cased).
    4. When evaluating the test results, differentiate between "FAIL" and "SKIP"
    
    [YOCTO #10841]
    [YOCTO #12277]
    
    Signed-off-by: Juro Bystricky <juro.bystricky at intel.com>
    Signed-off-by: Richard Purdie <richard.purdie at linuxfoundation.org>
---
 meta/recipes-core/dbus/dbus-test_1.12.2.bb | 30 ++++++++++++++++++++++++++----
 meta/recipes-core/dbus/dbus/run-ptest      | 20 +++++++++++++++++---
 2 files changed, 43 insertions(+), 7 deletions(-)

diff --git a/meta/recipes-core/dbus/dbus-test_1.12.2.bb b/meta/recipes-core/dbus/dbus-test_1.12.2.bb
index c3891a3..a6a5ca2 100644
--- a/meta/recipes-core/dbus/dbus-test_1.12.2.bb
+++ b/meta/recipes-core/dbus/dbus-test_1.12.2.bb
@@ -34,25 +34,47 @@ EXTRA_OECONF = "--enable-tests \
                 --enable-checks \
                 --enable-asserts \
                 --enable-verbose-mode \
+                --enable-largefile \
                 --disable-xml-docs \
                 --disable-doxygen-docs \
                 --disable-libaudit \
-                --disable-systemd \
-                --without-systemdsystemunitdir \
                 --with-dbus-test-dir=${PTEST_PATH} \
                 ${EXTRA_OECONF_X}"
 
+EXTRA_OECONF_append_class-target = " SYSTEMCTL=${base_bindir}/systemctl"
+
+PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'systemd x11', d)}"
+PACKAGECONFIG_class-native = ""
+PACKAGECONFIG_class-nativesdk = ""
+
+PACKAGECONFIG[systemd] = "--enable-systemd --with-systemdsystemunitdir=${systemd_system_unitdir},--disable-systemd --without-systemdsystemunitdir,systemd"
+PACKAGECONFIG[x11] = "--with-x --enable-x11-autolaunch,--without-x --disable-x11-autolaunch, virtual/libx11 libsm"
+PACKAGECONFIG[user-session] = "--enable-user-session --with-systemduserunitdir=${systemd_user_unitdir},--disable-user-session"
+
 do_install() {
     :
 }
 
 do_install_ptest() {
 	install -d ${D}${PTEST_PATH}/test
-	l="shell printf refs syslog marshal syntax corrupt dbus-daemon dbus-daemon-eavesdrop loopback relay"
+	l="shell printf refs syslog marshal syntax corrupt dbus-daemon dbus-daemon-eavesdrop loopback relay \
+	   variant uid-permissions syntax spawn sd-activation names monitor message fdpass "
 	for i in $l; do install ${B}/test/.libs/test-$i ${D}${PTEST_PATH}/test; done
+
 	l="bus bus-system bus-launch-helper"
 	for i in $l; do install ${B}/bus/.libs/test-$i ${D}${PTEST_PATH}/test; done
-	install ${B}/dbus/.libs/test-dbus ${D}${PTEST_PATH}/test
+
 	cp -r ${B}/test/data ${D}${PTEST_PATH}/test
+	install ${B}/dbus/.libs/test-dbus ${D}${PTEST_PATH}/test
+
+	install -d ${D}${PTEST_PATH}/test/.libs
+	cp -a ${B}/dbus/.libs/*.so* ${D}${PTEST_PATH}/test/.libs
+
+	# Remove build host references...
+	find "${D}${PTEST_PATH}/test/data" \( -name *.service -o -name *.conf \) -type f -exec \
+		sed -i \
+		 -e 's:${B}:${PTEST_PATH}:g' \
+		 {} +
 }
+
 RDEPENDS_${PN}-ptest += "bash"
diff --git a/meta/recipes-core/dbus/dbus/run-ptest b/meta/recipes-core/dbus/dbus/run-ptest
index c72d083..8a8970e 100755
--- a/meta/recipes-core/dbus/dbus/run-ptest
+++ b/meta/recipes-core/dbus/dbus/run-ptest
@@ -1,10 +1,24 @@
 #!/bin/sh
 
 output() {
-  if [ $? -eq 0 ]
+  retcode=$?
+  if [ $retcode -eq 0 ]
     then echo "PASS: $i"
-    else echo "FAIL: $i"
+  elif [ $retcode -eq 77 ]
+    then echo "SKIP: $i"
+  else echo "FAIL: $i"
   fi
 }
 
-for i in `ls test/test-*`; do ./$i ./test/data DBUS_TEST_HOMEDIR=./test >/dev/null; output; done
+export DBUS_TEST_HOMEDIR=./test
+export XDG_RUNTIME_DIR=./test
+export LD_LIBRARY_PATH=/usr/lib/dbus-test/ptest/test/.libs
+
+files=`ls test/test-*`
+
+for i in $files
+	do
+		./$i ./test/data >/dev/null
+		output
+	done
+

-- 
To stop receiving notification emails like this one, please contact
the administrator of this repository.