[oe-commits] Openembedded-commits Digest, Vol 141, Issue 247
Vaultoro Limited
support at vaultoro.com
Sun Jul 29 15:54:16 UTC 2018
Thanks for reaching out to the Vaultoro support team.
We will try to always get back to you as soon as possible usually
within 24 hours.
Thanks for your support.
On July 29, 2018 at 5:54 PM openembedded-commits wrote:
Send Openembedded-commits mailing list submissions to
openembedded-commits at lists.openembedded.org (
mailto:openembedded-commits at lists.openembedded.org )
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openembedded.org/mailman/listinfo/openembedded-commits
( http://lists.openembedded.org/mailman/listinfo/openembedded-commits )
or, via email, send a message with subject or body 'help' to
openembedded-commits-request at lists.openembedded.org (
mailto:openembedded-commits-request at lists.openembedded.org )
You can reach the person managing the list at
openembedded-commits-owner at lists.openembedded.org (
mailto:openembedded-commits-owner at lists.openembedded.org )
When replying, please edit your Subject line so it is more
specific
than "Re: Contents of Openembedded-commits digest..."
Today's Topics:
1. [meta-openembedded] 71/71: samba: Update to 4.8.3
(git at git.openembedded.org ( mailto:git at git.openembedded.org
))
----------------------------------------------------------------------
Message: 1
Date: Sun, 29 Jul 2018 15:54:35 +0000
From: git at git.openembedded.org ( mailto:git at git.openembedded.org
)
To: openembedded-commits at lists.openembedded.org (
mailto:openembedded-commits at lists.openembedded.org )
Subject: [oe-commits] [meta-openembedded] 71/71: samba: Update to
4.8.3
Message-ID:
Content-Type: text/plain; charset=utf-8
This is an automated email from the git hooks/post-receive
script.
khem pushed a commit to branch master-next
in repository meta-openembedded.
commit f14341f172ed2c44e523c66fac7ddf39ca883202
Author: Khem Raj
AuthorDate: Fri Jul 27 14:09:10 2018 -0700
samba: Update to 4.8.3
LDB 1.4.0 breaks Samba
---
...to-build-Samba-against-a-newer-minor-vers.patch | 86 +++++++
...void-timeout-for-nmbd-if-started-offline-.patch | 32 ---
...006-avoid-using-colon-in-the-checking-msg.patch | 32 ---
.../samba/samba-4.3.9-remove-getpwent_r.patch | 36 +--
.../samba/samba/samba-pam.patch | 21 +-
.../recipes-connectivity/samba/samba/smb.conf | 254
+++++++++++++++++++++
.../samba/samba/smb_conf-4.7.0.patch | 17 +-
.../samba/{samba_4.7.8.bb => samba_4.8.3.bb} | 19 +-
8 files changed, 399 insertions(+), 98 deletions(-)
diff --git
a/meta-networking/recipes-connectivity/samba/samba/0001-ldb-Refuse-to-build-Samba-against-a-newer-minor-vers.patch
b/meta-networking/recipes-connectivity/samba/samba/0001-ldb-Refuse-to-build-Samba-against-a-newer-minor-vers.patch
new file mode 100644
index 0000000..4c94831
--- /dev/null
+++
b/meta-networking/recipes-connectivity/samba/samba/0001-ldb-Refuse-to-build-Samba-against-a-newer-minor-vers.patch
@@ -0,0 +1,86 @@
+From 0bc8bc4143a58f91f6d7ce228b6763f377fdf45a Mon Sep 17
00:00:00 2001
+From: Andrew Bartlett
+Date: Thu, 12 Jul 2018 12:34:56 +1200
+Subject: [PATCH] ldb: Refuse to build Samba against a newer
minor version of
+ ldb
+
+Samba is not compatible with new versions of ldb (except release
versions)
+
+Other users would not notice the breakages, but Samba makes many
+more assuptions about the LDB internals than any other package.
+
+(Specifically, LDB 1.2 and 1.4 broke builds against released
+Samba versions)
+
+BUG: https://bugzilla.samba.org/show_bug.cgi?id=13519 ( https://bugzilla.samba.org/show_bug.cgi?id=13519 )
+
+Signed-off-by: Andrew Bartlett
+Reviewed-by: Gary Lockyer
+(cherry picked from commit
52efa796538ae004ca62ea32fc8c833472991be6)
+---
+ lib/ldb/wscript | 32 ++++++++++++++++++++++----------
+ 1 file changed, 22 insertions(+), 10 deletions(-)
+
+diff --git a/lib/ldb/wscript b/lib/ldb/wscript
+index d94086b..2bb0832 100644
+--- a/lib/ldb/wscript
++++ b/lib/ldb/wscript
+@@ -62,23 +62,33 @@ def configure(conf):
+ conf.env.standalone_ldb = conf.IN_LAUNCH_DIR()
+
+ if not conf.env.standalone_ldb:
++ max_ldb_version = [int(x) for x in VERSION.split(".")]
++ max_ldb_version[2] = 999
++ max_ldb_version_dots = "%d.%d.%d" %
tuple(max_ldb_version)
++
+ if conf.env.disable_python:
+- if conf.CHECK_BUNDLED_SYSTEM_PKG('ldb',
minversion=VERSION,
+- onlyif='talloc tdb
tevent',
+- implied_deps='replace
talloc tdb tevent'):
++ if conf.CHECK_BUNDLED_SYSTEM_PKG('ldb',
++
minversion=VERSION,
++
maxversion=max_ldb_version_dots,
++ onlyif='talloc tdb
tevent',
++
implied_deps='replace talloc tdb tevent'):
+ conf.define('USING_SYSTEM_LDB', 1)
+ else:
+ using_system_pyldb_util = True
+- if not conf.CHECK_BUNDLED_SYSTEM_PKG('pyldb-util',
minversion=VERSION,
+- onlyif='talloc tdb
tevent',
+-
implied_deps='replace talloc tdb tevent ldb'):
++ if not conf.CHECK_BUNDLED_SYSTEM_PKG('pyldb-util',
++
minversion=VERSION,
++
maxversion=max_ldb_version_dots,
++ onlyif='talloc
tdb tevent',
++
implied_deps='replace talloc tdb tevent ldb'):
+ using_system_pyldb_util = False
+
+ # We need to get a pyldb-util for all the python
versions
+ # we are building for
+ if conf.env['EXTRA_PYTHON']:
+ name = 'pyldb-util' +
conf.all_envs['extrapython']['PYTHON_SO_ABI_FLAG']
+- if not conf.CHECK_BUNDLED_SYSTEM_PKG(name,
minversion=VERSION,
++ if not conf.CHECK_BUNDLED_SYSTEM_PKG(name,
++
minversion=VERSION,
++
maxversion=max_ldb_version_dots,
+
onlyif='talloc tdb tevent',
+
implied_deps='replace talloc tdb tevent ldb'):
+ using_system_pyldb_util = False
+@@ -86,9 +96,11 @@ def configure(conf):
+ if using_system_pyldb_util:
+ conf.define('USING_SYSTEM_PYLDB_UTIL', 1)
+
+- if conf.CHECK_BUNDLED_SYSTEM_PKG('ldb',
minversion=VERSION,
+- onlyif='talloc tdb
tevent pyldb-util',
+- implied_deps='replace
talloc tdb tevent'):
++ if conf.CHECK_BUNDLED_SYSTEM_PKG('ldb',
++
minversion=VERSION,
++
maxversion=max_ldb_version_dots,
++ onlyif='talloc tdb
tevent pyldb-util',
++
implied_deps='replace talloc tdb tevent'):
+ conf.define('USING_SYSTEM_LDB', 1)
+
+ if conf.CONFIG_SET('USING_SYSTEM_LDB'):
+--
+2.18.0
+
diff --git
a/meta-networking/recipes-connectivity/samba/samba/0001-packaging-Avoid-timeout-for-nmbd-if-started-offline-.patch
b/meta-networking/recipes-connectivity/samba/samba/0001-packaging-Avoid-timeout-for-nmbd-if-started-offline-.patch
deleted file mode 100644
index 0e89a9b..0000000
---
a/meta-networking/recipes-connectivity/samba/samba/0001-packaging-Avoid-timeout-for-nmbd-if-started-offline-.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Upstream-Status: Submitted
[https://github.com/samba-team/samba/pull/70 ( https://github.com/samba-team/samba/pull/70 )]
-
-Signed-off-by: Andreas Oberritter
-
-From 50eac4fd30944e5e1d83060757633fe0ed572723 Mon Sep 17
00:00:00 2001
-From: Andreas Oberritter
-Date: Wed, 30 Nov 2016 16:25:06 +0100
-Subject: [PATCH] packaging: Avoid timeout for nmbd if started
offline with
- systemd
-
-If no network connection appears within DefaultTimeoutStartSec
-(~ 90s) after startup, nmbd fails to notify systemd and will
-therefore get killed.
-
-Signed-off-by: Andreas Oberritter
-
----
- packaging/systemd/nmb.service | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/packaging/systemd/nmb.service
b/packaging/systemd/nmb.service
-index 71c93d6..f3d2fc2 100644
---- a/packaging/systemd/nmb.service
-+++ b/packaging/systemd/nmb.service
-@@ -10,6 +10,7 @@ EnvironmentFile=-/etc/sysconfig/samba
- ExecStart=/usr/sbin/nmbd --foreground --no-process-group
$NMBDOPTIONS
- ExecReload=/usr/bin/kill -HUP $MAINPID
- LimitCORE=infinity
-+TimeoutStartSec=0
-
- [Install]
- WantedBy=multi-user.target
diff --git
a/meta-networking/recipes-connectivity/samba/samba/0006-avoid-using-colon-in-the-checking-msg.patch
b/meta-networking/recipes-connectivity/samba/samba/0006-avoid-using-colon-in-the-checking-msg.patch
deleted file mode 100644
index cdf7a38..0000000
---
a/meta-networking/recipes-connectivity/samba/samba/0006-avoid-using-colon-in-the-checking-msg.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 5413f97290d3126262eb309ecbcf7769509f2a11 Mon Sep 17
00:00:00 2001
-From: Jackie Huang
-Date: Tue, 10 Nov 2015 00:48:35 -0500
-Subject: [PATCH 6/7] avoid using colon in the checking msg
-
-Upstream-Status: Pending
-
-colon is used as the separator when parse from
-a answers file, the colon here makes it never
-get the right answer.
-
-Signed-off-by: Jackie Huang
----
- wscript_configure_system_mitkrb5 | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/wscript_configure_system_mitkrb5
b/wscript_configure_system_mitkrb5
-index a62d00b..a2d89f0 100644
---- a/wscript_configure_system_mitkrb5
-+++ b/wscript_configure_system_mitkrb5
-@@ -240,7 +240,7 @@ conf.CHECK_CODE('''
- ''',
- 'HAVE_WRFILE_KEYTAB',
- headers='krb5.h', lib='krb5', execute=True,
-- msg="Checking whether the WRFILE:-keytab is supported");
-+ msg="Checking whether the WRFILE -keytab is supported");
- # Check for KRB5_DEPRECATED handling
- conf.CHECK_CODE('''#define KRB5_DEPRECATED 1
- #include ''',
---
-1.9.1
-
diff --git
a/meta-networking/recipes-connectivity/samba/samba/samba-4.3.9-remove-getpwent_r.patch
b/meta-networking/recipes-connectivity/samba/samba/samba-4.3.9-remove-getpwent_r.patch
index 71db99c..a75ac2b 100644
---
a/meta-networking/recipes-connectivity/samba/samba/samba-4.3.9-remove-getpwent_r.patch
+++
b/meta-networking/recipes-connectivity/samba/samba/samba-4.3.9-remove-getpwent_r.patch
@@ -1,15 +1,23 @@
-Musl does not have _r versions of getent() and getpwent() APIs
+From 02e0b14d8fa025a5db410d60a7c0dfebd536aaeb Mon Sep 17
00:00:00 2001
+From: Khem Raj
+Date: Sun, 6 Nov 2016 23:40:54 -0800
+Subject: [PATCH] Musl does not have _r versions of getent() and
getpwent()
+ APIs
Taken from gentoo
http://data.gpo.zugaina.org/musl/net-fs/samba/files/samba-4.3.9-remove-getpwent_r.patch
( http://data.gpo.zugaina.org/musl/net-fs/samba/files/samba-4.3.9-remove-getpwent_r.patch )
Signed-off-by: Khem Raj
-Index: samba-4.4.5/source4/torture/local/nss_tests.c
-===================================================================
---- samba-4.4.5.orig/source4/torture/local/nss_tests.c
-+++ samba-4.4.5/source4/torture/local/nss_tests.c
-@@ -247,7 +247,6 @@ static bool test_getgrnam_r(struct tortu
+---
+ source4/torture/local/nss_tests.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+diff --git a/source4/torture/local/nss_tests.c
b/source4/torture/local/nss_tests.c
+index 2cd6122..04f13c6 100644
+--- a/source4/torture/local/nss_tests.c
++++ b/source4/torture/local/nss_tests.c
+@@ -247,7 +247,6 @@ static bool test_getgrnam_r(struct
torture_context *tctx,
return true;
}
@@ -17,7 +25,7 @@ Index:
samba-4.4.5/source4/torture/local/nss_tests.c
static bool test_getgrgid(struct torture_context *tctx,
gid_t gid,
struct group *grp_p)
-@@ -333,6 +332,7 @@ static bool test_enum_passwd(struct tort
+@@ -333,6 +332,7 @@ static bool test_enum_passwd(struct
torture_context *tctx,
return true;
}
@@ -25,7 +33,7 @@ Index:
samba-4.4.5/source4/torture/local/nss_tests.c
static bool test_enum_r_passwd(struct torture_context *tctx,
struct passwd **pwd_array_p,
size_t *num_pwd_p)
-@@ -381,6 +381,7 @@ static bool test_enum_r_passwd(struct to
+@@ -381,6 +381,7 @@ static bool test_enum_r_passwd(struct
torture_context *tctx,
return true;
}
@@ -33,7 +41,7 @@ Index:
samba-4.4.5/source4/torture/local/nss_tests.c
static bool torture_assert_passwd_equal(struct torture_context
*tctx,
const struct passwd *p1,
-@@ -432,7 +433,7 @@ static bool test_passwd_r(struct torture
+@@ -432,7 +433,7 @@ static bool test_passwd_r(struct
torture_context *tctx)
struct passwd *pwd, pwd1, pwd2;
size_t num_pwd;
@@ -42,7 +50,7 @@ Index:
samba-4.4.5/source4/torture/local/nss_tests.c
"failed to enumerate passwd");
for (i=0; i
+Date: Sun, 6 Nov 2016 23:40:54 -0800
+Subject: [PATCH] Lifted from gentoo and ported to 4.4.5
http://data.gpo.zugaina.org/musl/net-fs/samba/files/samba-4.2.7-pam.patch
( http://data.gpo.zugaina.org/musl/net-fs/samba/files/samba-4.2.7-pam.patch )
Signed-off-by: Khem Raj
-Index: samba-4.7.0/source3/wscript
-===================================================================
---- samba-4.7.0.orig/source3/wscript
-+++ samba-4.7.0/source3/wscript
-@@ -875,7 +875,7 @@ msg.msg_accrightslen = sizeof(fd);
+---
+ source3/wscript | 13 ++++++++++++-
+ 1 file changed, 12 insertions(+), 1 deletion(-)
+
+diff --git a/source3/wscript b/source3/wscript
+index 5436db2..864f614 100644
+--- a/source3/wscript
++++ b/source3/wscript
+@@ -879,7 +879,7 @@ msg.msg_accrightslen = sizeof(fd);
if conf.env.with_iconv:
conf.DEFINE('HAVE_ICONV', 1)
@@ -17,7 +24,7 @@ Index: samba-4.7.0/source3/wscript
use_pam=True
conf.CHECK_HEADERS('security/pam_appl.h
pam/pam_appl.h')
if not conf.CONFIG_SET('HAVE_SECURITY_PAM_APPL_H') and
not conf.CONFIG_SET('HAVE_PAM_PAM_APPL_H'):
-@@ -952,6 +952,17 @@ int i; i = PAM_RADIO_TYPE;
+@@ -956,6 +956,17 @@ int i; i = PAM_RADIO_TYPE;
"or headers not found. Use --without-pam
to disable "
"PAM support.");
diff --git
a/meta-networking/recipes-connectivity/samba/samba/smb.conf
b/meta-networking/recipes-connectivity/samba/samba/smb.conf
new file mode 100644
index 0000000..a0b87c3
--- /dev/null
+++ b/meta-networking/recipes-connectivity/samba/samba/smb.conf
@@ -0,0 +1,254 @@
+#
+# Sample configuration file for the Samba suite for Debian
GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options
listed
+# here. Samba has a huge number of configurable options most of
which
+# are not shown in this example
+#
+# Some options that are often worth tuning have been included as
+# commented-out examples in this file.
+# - When such options are commented with ";", the proposed
setting
+# differs from the default Samba behaviour
+# - When commented with "#", the proposed setting is the
default
+# behaviour of Samba but the option is considered important
+# enough to be mentioned here
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic
+# errors.
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server
will part of
+ workgroup = WORKGROUP
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable its
WINS Server
+# wins support = no
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS
Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but
NOT both
+; wins server = w.x.y.z
+
+# This will prevent nmbd to search for NetBIOS names through
DNS.
+ dns proxy = no
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP
address/netmask;
+# interface names are normally preferred
+; interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must
use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba
machine is
+# not protected by a firewall or is a firewall itself. However,
this
+# option cannot handle dynamic or non-broadcast interfaces
correctly.
+; bind interfaces only = yes
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Cap the size of the individual log files (in KiB).
+ max log size = 1000
+
+# If you want Samba to only log through syslog then set the
following
+# parameter to 'yes'.
+# syslog only = no
+
+# We want Samba to log a minimum amount of information to
syslog. Everything
+# should go to /var/log/samba/log.{smbd,nmbd} instead. If you
want to log
+# through syslog you should set the following parameter to
something higher.
+ syslog = 0
+
+# Do something sensible when Samba crashes: mail the admin a
backtrace
+ panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# Server role. Defines in which mode Samba will operate.
Possible
+# values are "standalone server", "member server", "classic
primary
+# domain controller", "classic backup domain controller",
"active
+# directory domain controller".
+#
+# Most people will want "standalone server" or "member server".
+# Running as "active directory domain controller" will require
first
+# running "samba-tool domain provision" to wipe databases and
create a
+# new domain.
+ server role = standalone server
+
+# If you are using encrypted passwords, Samba will need to know
what
+# password database type you are using.
+ passdb backend = tdbsam
+
+ obey pam restrictions = yes
+
+# This boolean parameter controls whether Samba attempts to sync
the Unix
+# password with the SMB password when the encrypted SMB password
in the
+# passdb is changed.
+ unix password sync = yes
+
+# For Unix password sync to work on a Debian GNU/Linux system,
the following
+# parameters must be set (thanks to Ian Kahan for
+# sending the correct chat script for the passwd program in
Debian Sarge).
+ passwd program = /usr/bin/passwd %u
+ passwd chat = *Enter\snew\s*\spassword:* %n\n
*Retype\snew\s*\spassword:* %n\n
*password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password
changes
+# when requested by an SMB client instead of the program listed
in
+# 'passwd program'. The default is 'no'.
+ pam password change = yes
+
+# This option controls how unsuccessful authentication attempts
are mapped
+# to anonymous connections
+ map to guest = bad user
+
+########## Domains ###########
+
+#
+# The following settings only takes effect if 'server role =
primary
+# classic domain controller', 'server role = backup domain
controller'
+# or 'domain logons' is set
+#
+
+# It specifies the location of the user's
+# profile directory from the client point of view) The following
+# required a [profiles] share to be setup on the samba server
(see
+# below)
+; logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's
home directory
+# (this is Samba's default)
+# logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is
set
+# It specifies the location of a user's home directory (from the
client
+# point of view)
+; logon drive = H:
+# logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is
set
+# It specifies the script to run during logon. The script must
be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+; logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller
via the SAMR
+# RPC pipe. The example command creates a user account with a
disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet
--disabled-password --gecos "" %u
+
+# This allows machine accounts to be created on the domain
controller via the
+# SAMR RPC pipe.
+# The following assumes a "machines" group exists on the system
+; add machine script = /usr/sbin/useradd -g machines -c "%u
machine account" -d /var/lib/samba -s /bin/false %u
+
+# This allows Unix groups to be created on the domain controller
via the SAMR
+# RPC pipe.
+; add group script = /usr/sbin/addgroup --force-badname %g
+
+############ Misc ############
+
+# Using the following line enables you to customise your
configuration
+# on a per machine basis. The %m gets replaced with the netbios
name
+# of the machine that is connecting
+; include = /home/samba/etc/smb.conf.%m
+
+# Some defaults for winbind (make sure you're not using the
ranges
+# for something else.)
+; idmap uid = 10000-20000
+; idmap gid = 10000-20000
+; template shell = /bin/bash
+
+# Setup usershare options to enable non-root users to share
folders
+# with the net usershare command.
+
+# Maximum number of usershare. 0 (default) means that usershare
is disabled.
+; usershare max shares = 100
+
+# Allow users who've been granted usershare privileges to create
+# public shares, not just authenticated ones
+ usershare allow guests = yes
+
+#======================= Share Definitions
=======================
+
+[homes]
+ comment = Home Directories
+ browseable = no
+
+# By default, the home directories are exported read-only.
Change the
+# next parameter to 'no' if you want to be able to write to
them.
+ read only = yes
+
+# File creation mask is set to 0700 for security reasons. If you
want to
+# create files with group=rw permissions, set next parameter to
0775.
+ create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons.
If you want to
+# create dirs. with group=rw permissions, set next parameter to
0775.
+ directory mask = 0700
+
+# By default, \\server\username shares can be connected to by
anyone
+# with access to the samba server.
+# The following parameter makes sure that only "username" can
connect
+# to \\server\username
+# This might need tweaking when using external authentication
schemes
+ valid users = %S
+
+# Un-comment the following and create the netlogon directory for
Domain Logons
+# (you need to configure Samba to act as a domain controller
too.)
+;[netlogon]
+; comment = Network Logon Service
+; path = /home/samba/netlogon
+; guest ok = yes
+; read only = yes
+
+# Un-comment the following and create the profiles directory to
store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller
too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+; comment = Users profiles
+; path = /home/samba/profiles
+; guest ok = no
+; browseable = no
+; create mask = 0600
+; directory mask = 0700
+
+[printers]
+ comment = All Printers
+ browseable = no
+ path = /var/spool/samba
+ printable = yes
+ guest ok = no
+ read only = yes
+ create mask = 0700
+
+# Windows clients look for this share name as a source of
downloadable
+# printer drivers
+[print$]
+ comment = Printer Drivers
+ path = /var/lib/samba/printers
+ browseable = yes
+ read only = yes
+ guest ok = no
+# Uncomment to allow remote administration of Windows print
drivers.
+# You may need to replace 'lpadmin' with the name of the group
your
+# admin users are members of.
+# Please note that you also need to set appropriate Unix
permissions
+# to the drivers directory for these users to have write rights
in it
+; write list = root, @lpadmin
+
diff --git
a/meta-networking/recipes-connectivity/samba/samba/smb_conf-4.7.0.patch
b/meta-networking/recipes-connectivity/samba/samba/smb_conf-4.7.0.patch
index 77c8b36..6ae2928 100644
---
a/meta-networking/recipes-connectivity/samba/samba/smb_conf-4.7.0.patch
+++
b/meta-networking/recipes-connectivity/samba/samba/smb_conf-4.7.0.patch
@@ -1,4 +1,7 @@
-samba: correct log files location
+From f99b6a8617df6a46f41fb68ffafb2608dbb6681e Mon Sep 17
00:00:00 2001
+From: Joe Slater
+Date: Wed, 8 Nov 2017 11:58:05 -0800
+Subject: [PATCH] samba: correct log files location
We use /var/log/samba.
@@ -6,9 +9,15 @@ Upstream-Status: Pending
Signed-off-by: Joe Slater
---- a/packaging/RHEL/setup/smb.conf
-+++ b/packaging/RHEL/setup/smb.conf
-@@ -63,7 +63,7 @@
+---
+ examples/smb.conf.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/examples/smb.conf.default
b/examples/smb.conf.default
+index 2f20720..44c1aa8 100644
+--- a/examples/smb.conf.default
++++ b/examples/smb.conf.default
+@@ -52,7 +52,7 @@
# this tells Samba to use a separate log file for each machine
# that connects
diff --git
a/meta-networking/recipes-connectivity/samba/samba_4.7.8.bb
b/meta-networking/recipes-connectivity/samba/samba_4.8.3.bb
similarity index 95%
rename from
meta-networking/recipes-connectivity/samba/samba_4.7.8.bb
rename to
meta-networking/recipes-connectivity/samba/samba_4.8.3.bb
index fc1a2e0..2052e74 100644
--- a/meta-networking/recipes-connectivity/samba/samba_4.7.8.bb
+++ b/meta-networking/recipes-connectivity/samba/samba_4.8.3.bb
@@ -13,25 +13,25 @@ ${SAMBA_MIRROR}
http://www.mirrorservice.org/sites/ftp.samba.org ( http://www.mirrorservice.org/sites/ftp.samba.org ) \n \
"
SRC_URI = "${SAMBA_MIRROR}/stable/samba-${PV}.tar.gz \
+ file://smb.conf \
file://16-do-not-check-xsltproc-manpages.patch \
file://20-do-not-import-target-module-while-cross-compile.patch \
file://21-add-config-option-without-valgrind.patch \
-
file://0001-packaging-Avoid-timeout-for-nmbd-if-started-offline-.patch
\
-
file://0006-avoid-using-colon-in-the-checking-msg.patch \
file://netdb_defines.patch \
file://glibc_only.patch \
file://iconv-4.7.0.patch \
file://dnsserver-4.7.0.patch \
file://smb_conf-4.7.0.patch \
file://volatiles.03_samba \
- "
+
file://0001-ldb-Refuse-to-build-Samba-against-a-newer-minor-vers.patch
\
+ "
SRC_URI_append_libc-musl = " \
file://samba-pam.patch \
file://samba-4.3.9-remove-getpwent_r.patch \
"
-SRC_URI[md5sum] = "16b70fda54cf84521ed976a0856430cc"
-SRC_URI[sha256sum] =
"ca6fca9d7e248bcaa55c54bdcc115eeed10660074da5c54a2b78dd3cccc604de"
+SRC_URI[md5sum] = "67f271ed6b793c2acfe014b5b8f0cca8"
+SRC_URI[sha256sum] =
"e0569a8a605d5dfb49f1fdd11db796f4d36fe0351c4a7f21387ef253010b82ed"
UPSTREAM_CHECK_REGEX = "samba\-(?P4\.7(\.\d+)+).tar.gz"
@@ -39,7 +39,7 @@ inherit systemd waf-samba cpan-base perlnative
update-rc.d
# remove default added RDEPENDS on perl
RDEPENDS_${PN}_remove = "perl"
-DEPENDS += "readline virtual/libiconv zlib popt libtalloc libtdb
libtevent libldb libbsd libaio libpam"
+DEPENDS += "readline virtual/libiconv zlib popt libtalloc libtdb
libtevent libbsd libaio libpam"
inherit distro_features_check
REQUIRED_DISTRO_FEATURES = "pam"
@@ -104,7 +104,7 @@
SAMBA4_MODULES="${SAMBA4_IDMAP_MODULES},${SAMBA4_PDB_MODULES},${SAMBA4_AUTH_MODU
# .so files so there will not be a conflict. This is not done
consistantly, so be very careful
# when adding to this list.
#
-SAMBA4_LIBS="heimdal,cmocka,NONE"
+SAMBA4_LIBS="heimdal,cmocka,ldb,pyldb-util,NONE"
EXTRA_OECONF += "--enable-fhs \
--with-piddir=/run \
@@ -135,7 +135,7 @@ do_install_append() {
done
install -d ${D}${systemd_system_unitdir}
- install -m 0644 packaging/systemd/*.service
${D}${systemd_system_unitdir}
+ install -m 0644 ${S}/bin/default/packaging/systemd/*.service
${D}${systemd_system_unitdir}/
sed -e 's,\(ExecReload=\).*\(/kill\),\1${base_bindir}\2,' \
-e 's,/etc/sysconfig/samba,${sysconfdir}/default/samba,'
\
-i ${D}${systemd_system_unitdir}/*.service
@@ -159,7 +159,7 @@ do_install_append() {
install -d ${D}${sysconfdir}/samba
echo "127.0.0.1 localhost" > ${D}${sysconfdir}/samba/lmhosts
- install -m644 packaging/RHEL/setup/smb.conf
${D}${sysconfdir}/samba/smb.conf
+ install -m644 ${WORKDIR}/smb.conf
${D}${sysconfdir}/samba/smb.conf
install -D -m 644 ${WORKDIR}/volatiles.03_samba
${D}${sysconfdir}/default/volatiles/03_samba
install -d ${D}${sysconfdir}/default
@@ -268,6 +268,7 @@ FILES_winbind = "${sbindir}/winbindd \
${libdir}/samba/idmap \
${libdir}/samba/nss_info \
${libdir}/winbind_krb5_locator.so \
+ ${libdir}/winbind-krb5-localauth.so \
${sysconfdir}/init.d/winbind \
${systemd_system_unitdir}/winbind.service"
--
To stop receiving notification emails like this one, please
contact
the administrator of this repository.
------------------------------
--
_______________________________________________
Openembedded-commits mailing list
Openembedded-commits at lists.openembedded.org (
mailto:Openembedded-commits at lists.openembedded.org )
http://lists.openembedded.org/mailman/listinfo/openembedded-commits
( http://lists.openembedded.org/mailman/listinfo/openembedded-commits )
End of Openembedded-commits Digest, Vol 141, Issue 247
******************************************************
Powered by UserVoice. ( http://www.uservoice.com/powered-by?utm_campaign=poweredby&utm_medium=email&utm_source=ticket&uv_company=Vaultoro+Limited&uv_contact_url=support.vaultoro.com&uv_experience=email )
More information about the Openembedded-commits
mailing list