[oe-commits] [openembedded-core] 02/17: linux-yocto/5.0: bsp: add basic xilinx zynqmp support
git at git.openembedded.org
git at git.openembedded.org
Tue Jun 25 17:05:13 UTC 2019
This is an automated email from the git hooks/post-receive script.
rpurdie pushed a commit to branch master-next
in repository openembedded-core.
commit 3f7f090f97e52bc219a6375d1cba92628c7a9a2a
Author: Bruce Ashfield <bruce.ashfield at gmail.com>
AuthorDate: Mon Jun 24 08:44:41 2019 -0400
linux-yocto/5.0: bsp: add basic xilinx zynqmp support
Zumeng Chen has added core/basic support for the zynqmp that is bootable
using the 5.0 and 5.2-rcX kernels. This makes the fragments available
for future refinement and factoring. A bootlog follows:
ZynqMP> setenv bootargs console=ttyPS0,115200 root=/dev/mmcblk0p3 rw
rootwait earlycon=cdns,mmio,0xFF000000 clk_ignore_unused ip=dhcp
ZynqMP> tftpboot 0x10000000 Image; tftpboot 0x11800000 dtb; booti
0x10000000 - 0x11800000
Using ethernet at ff0e0000 device
Filename 'Image'.
Load address: 0x10000000
Loading:
###########
11.3 MiB/s
done
Bytes transferred = 16378368 (f9ea00 hex)
Using ethernet at ff0e0000 device
TFTP from server 128.224.162.211; our IP address is 128.224.162.99
Filename 'dtb'.
Load address: 0x11800000
Loading: ##
4.7 MiB/s
done
Bytes transferred = 19746 (4d22 hex)
Booting using the fdt blob at 0x11800000
Loading Device Tree to 0000000007ff8000, end 0000000007fffd21 ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 5.2.0-rc3-yoctodev-standard (oe-user at oe-host) (gcc version
9.1.0 (GCC)) #1 SMP PREEMPT Thu Jun 6 00:53:26 UTC 2019
Machine model: ZynqMP ZCU102 Rev1.0
earlycon: cdns0 at MMIO 0x00000000ff000000 (options '')
printk: bootconsole [cdns0] enabled
efi: Getting EFI parameters from FDT:
efi: UEFI not found.
cma: Reserved 16 MiB at 0x000000007ec00000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 30 pages/cpu s83416 r8192 d31272 u122880
Detected VIPT I-cache on CPU0
CPU features: detected: ARM erratum 845719
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists, mobility grouping on. Total pages: 1031940
Kernel command line: console=ttyPS0,115200 root=/dev/mmcblk0p3 rw
rootwait earlycon=cdns,mmio,0xFF000000 clk_ignore_unused ip=dhcp
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
software IO TLB: mapped [mem 0x7ac00000-0x7ec00000] (64MB)
Memory: 4013572K/4193280K available (10748K kernel code, 1210K rwdata,
2764K rodata, 1216K init, 757K bss, 163324K reserved, 16384K
cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 36121 entries in 142 pages
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Adjusting CPU interface base to 0x00000000f902f000
GIC: Using split EOI/Deactivate mode
random: get_random_bytes called from start_kernel+0x328/0x4c4 with
crng_init=0
arch_timer: cp15 timer(s) running at 99.99MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x170f8de2d3, max_idle_ns: 440795206112 ns
sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every
4398046511101ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer
frequency.. 199.98 BogoMIPS (lpj=399960)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
ASID allocator initialised with 32768 entries
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
xor: measuring software checksum speed
8regs : 2360.000 MB/sec
32regs : 2706.000 MB/sec
arm64_neon: 2018.000 MB/sec
xor: using function: 32regs (2706.000 MB/sec)
DMI not present or invalid.
NET: Registered protocol family 16
cpuidle: using governor ladder
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
��ɥ��ѭ console [ttyPS0] enabled 0xff000000 (irq = 33, base_baud =
6250000) is a xuartps
printk: console [ttyPS0] enabled
printk: bootconsole [cdns0] disabled
printk: bootconsole [cdns0] disabled
ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 34, base_baud =
6250000) is a xuartps
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
raid6: neonx8 gen() 1518 MB/s
raid6: neonx8 xor() 1442 MB/s
raid6: neonx4 gen() 1471 MB/s
raid6: neonx4 xor() 1409 MB/s
raid6: neonx2 gen() 1128 MB/s
raid6: neonx2 xor() 1175 MB/s
raid6: neonx1 gen() 737 MB/s
raid6: neonx1 xor() 887 MB/s
raid6: int64x8 gen() 1166 MB/s
raid6: int64x8 xor() 763 MB/s
raid6: int64x4 gen() 983 MB/s
raid6: int64x4 xor() 739 MB/s
raid6: int64x2 gen() 683 MB/s
raid6: int64x2 xor() 601 MB/s
raid6: int64x1 gen() 452 MB/s
raid6: int64x1 xor() 462 MB/s
raid6: using algorithm neonx8 gen() 1518 MB/s
raid6: .... xor() 1442 MB/s, rmw enabled
raid6: using neon recovery algorithm
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giometti at linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
FPGA manager framework
clocksource: Switched to clocksource arch_sys_counter
*** VALIDATE hugetlbfs ***
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768
bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
hw perfevents: no interrupt-affinity property for /pmu, guessing.
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kprobes: failed to populate blacklist: -22
Please take care of using kprobes.
workingset: timestamp_bits=46 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. �© 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
nwl-pcie fd0e0000.pcie: Link is DOWN
nwl-pcie fd0e0000.pcie: host bridge /amba/pcie at fd0e0000 ranges:
nwl-pcie fd0e0000.pcie: MEM 0xe0000000..0xefffffff -> 0xe0000000
nwl-pcie fd0e0000.pcie: MEM 0x600000000..0x7ffffffff -> 0x600000000
nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff pref]
pci 0000:00:00.0: [10ee:d021] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PCI bridge to [bus 01-0c]
pcieport 0000:00:00.0: PME: Signaling with IRQ 37
xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
cacheinfo: Unable to detect cache hierarchy for CPU 0
brd: module loaded
loop: module loaded
ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl
platform mode
ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fbs pio
slum part ccc sds apst
scsi host0: ahci-ceva
scsi host1: ahci-ceva
ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x100 irq
31
ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x180 irq
31
libphy: Fixed MDIO Bus: probed
CAN device driver interface
libphy: MACB_mii_bus: probed
Generic PHY ff0e0000.ethernet-ffffffff:0c: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:0c, irq=POLL)
macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000
irq 20 (00:0a:35:04:9a:86)
dwc3 fe200000.usb: Failed to get clk 'ref': -2
dwc3 fe200000.usb: Configuration mismatch. dr_mode forced to host
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks
0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 35, io mem 0xfe200000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling
LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
rtc_zynqmp ffa60000.rtc: registered as rtc0
pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator
GPIO line 322 (sel0) hogged as output/low
GPIO line 323 (sel1) hogged as output/high
GPIO line 324 (sel2) hogged as output/high
GPIO line 325 (sel3) hogged as output/high
pca953x 0-0021: 0-0021 supply vcc not found, using dummy regulator
cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 22
cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 23
i2c i2c-0: Added multiplexed i2c bus 2
i2c i2c-0: Added multiplexed i2c bus 3
i2c i2c-0: Added multiplexed i2c bus 4
i2c i2c-0: Added multiplexed i2c bus 5
pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
i2c i2c-1: Added multiplexed i2c bus 6
i2c i2c-7: of_i2c: modalias failure on
/amba/i2c at ff030000/i2c-mux at 74/i2c at 1/clock-generator at 36
i2c i2c-7: Failed to create I2C device for
/amba/i2c at ff030000/i2c-mux at 74/i2c at 1/clock-generator at 36
i2c i2c-1: Added multiplexed i2c bus 7
si570 8-005d: registered, current frequency 300000000 Hz
i2c i2c-1: Added multiplexed i2c bus 8
si570 9-005d: clock registration failed
si570: probe of 9-005d failed with error -17
i2c i2c-1: Added multiplexed i2c bus 9
i2c i2c-10: of_i2c: modalias failure on
/amba/i2c at ff030000/i2c-mux at 74/i2c at 4/clock-generator at 69
i2c i2c-10: Failed to create I2C device for
/amba/i2c at ff030000/i2c-mux at 74/i2c at 4/clock-generator at 69
i2c i2c-1: Added multiplexed i2c bus 10
i2c i2c-1: Added multiplexed i2c bus 11
i2c i2c-1: Added multiplexed i2c bus 12
i2c i2c-1: Added multiplexed i2c bus 13
pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
i2c i2c-1: Added multiplexed i2c bus 14
i2c i2c-1: Added multiplexed i2c bus 15
i2c i2c-1: Added multiplexed i2c bus 16
i2c i2c-1: Added multiplexed i2c bus 17
i2c i2c-1: Added multiplexed i2c bus 18
i2c i2c-1: Added multiplexed i2c bus 19
i2c i2c-1: Added multiplexed i2c bus 20
i2c i2c-1: Added multiplexed i2c bus 21
pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
ata1: SATA link down (SStatus 0 SControl 330)
ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
ata2: SATA link down (SStatus 0 SControl 330)
ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at (____ptrval____)
with timeout 10s
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised:
dm-devel at redhat.com
EDAC MC: ECC not enabled
cpu cpu0: failed to get clock: -2
cpufreq-dt: probe of cpufreq-dt failed with error -2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
u32 classifier
Actions configured
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20170425 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20170425)
can: broadcast manager protocol (rev 20170425 t)
can: netlink gateway (rev 20170425) max_hops=1
Key type dns_resolver registered
registered taskstats version 1
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
rtc_zynqmp ffa60000.rtc: setting system clock to 2019-06-06T03:39:58 UTC
(1559792398)
macb ff0e0000.ethernet eth0: link up (1000/Full)
pps pps0: new PPS source ptp0
macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered.
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
mmc0: Problem switching card into high-speed mode!
mmc0: new SDHC card at address 0001
mmcblk0: mmc0:0001 SD16G 14.5 GiB
Sending DHCP requests .
mmcblk0: p1 p2 p3
, OK
IP-Config: Complete:
device=eth0, hwaddr=00:0a:35:04:9a:86, ipaddr=xxxxx,
mask=255.255.254.0
host=xxx, domain=corp.ad.wrs.com, nis-domain=swamp
bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
clk: Not disabling unused clocks
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:
(null)
VFS: Mounted root (ext4 filesystem) on device 179:3.
devtmpfs: mounted
Freeing unused kernel memory: 1216K
Run /sbin/init as init process
random: fast init done
systemd[1]: systemd 242-19-gdb2e367+ running in system mode. (+PAM
-AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP
-GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN
-)
systemd[1]: Detected architecture arm64.
Welcome to Wind River Linux development 19.23 Update 0!
systemd[1]: Set hostname to <xilinx-zynqmp>.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references
a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket �→ /run/dbus/system_bus_socket; please
update the unit f.
systemd[1]: /lib/systemd/system/rpcbind.socket:4: ListenStream=
references a path below legacy directory /var/run/, updating
/var/run/rpcbind.sock �→ /run/rpcbind.sock; please update the unit file
accordingly.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Reached target Swap.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Slices.
[ OK ] Listening on Journal Socket.
Starting udev Coldplug all Devices...
Mounting POSIX Message Queue File System...
Mounting Temporary Directory (/tmp)...
Starting Journal Service...
Starting Remount Root and Kernel File Systems...
Mounting Kernel Debug File System...
EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
Starting Create list of re�…odes for the current kernel...
[ OK ] Started Forward Password R�…uests to Wall Directory Watch.
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on Network Service Netlink Socket.
Starting Apply Kernel Variables...
[ OK ] Started Dispatch Password �…ts to Console Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Created slice system-getty.slice.
Mounting Huge Pages File System...
[ OK ] Started Journal Service.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Temporary Directory (/tmp).
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Started Create list of req�… nodes for the current kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Huge Pages File System.
Starting Create System Users...
Starting Rebuild Hardware Database...
Starting Flush Journal to Persistent Storage...
[ OK ] Started udev Coldplug all Devices.
systemd-journald[148]: Received request to flush runtime journal from
PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
[ OK ] Mounted /var/volatile.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Load/Save Random Seed...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Rebuild Journal Catalog...
Starting Update UTMP about System Boot/Shutdown...
Starting Run pending postinsts...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Rebuild Journal Catalog.
[ OK ] Started Run pending postinsts.
[ OK ] Started Rebuild Hardware Database.
Starting udev Kernel Device Manager...
Starting Update is Completed...
[ OK ] Started Update is Completed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target System Initialization.
Starting Console System Startup Logging...
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on dropbear.socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started System Logging Service.
[ OK ] Started Dynamic Host Configuration Protocol (DHCP).
[ OK ] Started Kernel Logging Service.
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Xserver startup without a display manager.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
Starting Telephony service...
Starting Network Service...
[ OK ] Started Console System Startup Logging.
[ OK ] Found device /dev/ttyPS0.
[ OK ] Listening on Load/Save RF �…itch Status /dev/rfkill Watch.
[ OK ] Started Network Service.
Starting Network Name Resolution...
[ OK ] Started Login Service.
[ OK ] Started Network Name Resolution.
[ OK ] Started Telephony service.
[ OK ] Reached target Network.
Starting Berkeley Internet Name Domain (DNS)...
Starting /etc/rc.local Compatibility...
Starting Permit User Sessions...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyPS0.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Berkeley Internet Name Domain (DNS).
[ OK ] Reached target Host and Network Name Lookups.
Wind River Linux development 19.23 Update 0 xilinx-zynqmp ttyPS0
xilinx-zynqmp login: root
root at xilinx-zynqmp:~# uname 0a
uname: extra operand '0a'
Try 'uname --help' for more information.
root at xilinx-zynqmp:~# uname -a
Linux xilinx-zynqmp 5.2.0-rc3-yoctodev-standard #1 SMP PREEMPT Thu Jun 6
00:53:26 UTC 2019 aarch64 aarch64 aarch64 GNU/Linux
Signed-off-by: Zumeng Chen <zchen at windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield at gmail.com>
Signed-off-by: Richard Purdie <richard.purdie at linuxfoundation.org>
---
meta/recipes-kernel/linux/linux-yocto-rt_5.0.bb | 2 +-
meta/recipes-kernel/linux/linux-yocto-tiny_5.0.bb | 2 +-
meta/recipes-kernel/linux/linux-yocto_5.0.bb | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_5.0.bb b/meta/recipes-kernel/linux/linux-yocto-rt_5.0.bb
index 8bd9d74..c5bd342 100644
--- a/meta/recipes-kernel/linux/linux-yocto-rt_5.0.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-rt_5.0.bb
@@ -12,7 +12,7 @@ python () {
}
SRCREV_machine ?= "9c1e84c9b81b6bf1df55f26f2e0517266c37f7eb"
-SRCREV_meta ?= "31de88e51d100f2c3eefb7acb7390b0144bcfc69"
+SRCREV_meta ?= "97eac3146504a2348543b8b8859f44a7b8f0d590"
SRC_URI = "git://git.yoctoproject.org/linux-yocto.git;branch=${KBRANCH};name=machine \
git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.0;destsuffix=${KMETA}"
diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_5.0.bb b/meta/recipes-kernel/linux/linux-yocto-tiny_5.0.bb
index 226a90c..d6e45c6 100644
--- a/meta/recipes-kernel/linux/linux-yocto-tiny_5.0.bb
+++ b/meta/recipes-kernel/linux/linux-yocto-tiny_5.0.bb
@@ -17,7 +17,7 @@ KCONF_BSP_AUDIT_LEVEL = "2"
SRCREV_machine_qemuarm ?= "fabee455f397ba8054f35a3ad5f2250bbad93bef"
SRCREV_machine ?= "00638cdd8f92869a0f89ebe3289fdbd856ba9458"
-SRCREV_meta ?= "31de88e51d100f2c3eefb7acb7390b0144bcfc69"
+SRCREV_meta ?= "97eac3146504a2348543b8b8859f44a7b8f0d590"
PV = "${LINUX_VERSION}+git${SRCPV}"
diff --git a/meta/recipes-kernel/linux/linux-yocto_5.0.bb b/meta/recipes-kernel/linux/linux-yocto_5.0.bb
index 7456141..5bc2d54 100644
--- a/meta/recipes-kernel/linux/linux-yocto_5.0.bb
+++ b/meta/recipes-kernel/linux/linux-yocto_5.0.bb
@@ -21,7 +21,7 @@ SRCREV_machine_qemux86 ?= "00638cdd8f92869a0f89ebe3289fdbd856ba9458"
SRCREV_machine_qemux86-64 ?= "00638cdd8f92869a0f89ebe3289fdbd856ba9458"
SRCREV_machine_qemumips64 ?= "5a8b27bcc0b16077ab8edfcd3fb25c80dc2c652e"
SRCREV_machine ?= "00638cdd8f92869a0f89ebe3289fdbd856ba9458"
-SRCREV_meta ?= "31de88e51d100f2c3eefb7acb7390b0144bcfc69"
+SRCREV_meta ?= "97eac3146504a2348543b8b8859f44a7b8f0d590"
# remap qemuarm to qemuarma15 for the 5.0 kernel
# KMACHINE_qemuarm ?= "qemuarma15"
--
To stop receiving notification emails like this one, please contact
the administrator of this repository.
More information about the Openembedded-commits
mailing list