[OE-core] [poky] [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard

[Koen Kooi]

Op 15 apr. 2011 om 20:26 heeft Saul Wold <sgw at linux.intel.com> het volgende geschreven:

> On 04/15/2011 10:00 AM, Paul Eggleton wrote:
>> From: Paul Eggleton<paul.eggleton at linux.intel.com>
>> 
>> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
>> shows up as usb0).
>> 
>> Fixes [YOCTO #930]
>> 
>> Signed-off-by: Paul Eggleton<paul.eggleton at linux.intel.com>
>> ---
>>  .../netbase/netbase-4.45/beagleboard/interfaces    |   27 ++++++++++++++++++++
>>  1 files changed, 27 insertions(+), 0 deletions(-)
>>  create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> 
> I know this time would come!
> 
> So this is up for discussion in a big way!
> 
> There was some initial discussion at ELC this last week about what goes where and how layers are going to work moving forward.  I know that we are committed to the qemu* machines in oe-core (meta), and that currently meta-yocto contains a set of core HW (beagleboard among them), so the question then is should the HW specific stuff, such as this patch move to meta-yocto or some other layer?  There are a couple other recipes such as x-load and formfactor that contain HW specific files.

It should live in the upstream beagleboard BSP layer, which currently is meta-texasinstruments