[OE-core] [PATCH 1/2] u-boot: improved DESCRIPTION, fixed HOMEPAGE
Ni Qingliang
niqingliang at insigma.com.cn
Wed Dec 28 00:48:09 UTC 2011
I have just done a seperate env tools bb for my project, but use the
config file to assign the env size and address (which is generated on
booting from /proc/mtd).
in the fdt, the u-boot env has a seperate partition identified by it's
name "u-boot environment"
and have some problem:
1. the fw_printenv will exit with 0 even though can't read the env (CRC
error).
2. the default env vars in fw_printenv(used when CRC error) are not same
as it in the u-boot.
On Wed, 2011-12-28 at 04:35 +0800, Frans Meulenbroeks wrote:
> HOMEPAGE pointed to an sf.net page that said that the
> page did not exist any more and after that it redirected
> to the denx.de page; updated HOMEPAGE to point to that page
> Also improved the description to use the official capitalisation
>
> Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks at gmail.com>
> ---
> meta/recipes-bsp/u-boot/u-boot.inc | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/meta/recipes-bsp/u-boot/u-boot.inc b/meta/recipes-bsp/u-boot/u-boot.inc
> index 544acd2..a3f50bc 100644
> --- a/meta/recipes-bsp/u-boot/u-boot.inc
> +++ b/meta/recipes-bsp/u-boot/u-boot.inc
> @@ -1,3 +1,5 @@
> +DESCRIPTION = "U-Boot - the Universal Boot Loader"
> +HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
> DESCRIPTION = "U-boot bootloader"
> HOMEPAGE = "http://u-boot.sf.net"
> SECTION = "bootloaders"
> --
> 1.7.8.1
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Yi Qingliang
niqingliang at insigma.com.cn
https://niqingliang2003.wordpress.com
More information about the Openembedded-core
mailing list