[OE-core] [PATCH 00/10] works of adding packages pam support

Kang Kai Kai.Kang at windriver.com
Fri Jul 22 02:18:50 UTC 2011


On 2011年07月22日 01:02, Saul Wold wrote:
> On 07/21/2011 01:00 AM, Kang Kai wrote:
>> From: Kang Kai<kai.kang at windriver.com>
>>
>> Hi Scott,
>>
>> This is the current work of adding pam supports.
>>
>> After update libpam to 1.1.4, we enable the packages pam support. And 
>> if the pacakge
>> doesn't have a pam configure file, import from Fedora.
>>
> Kai,
>
> Thanks for this work, you have already gotten some feedback, I have a 
> few general comments to add that are across many of these patches, so 
> I will note them here.
>
> Whitespace: you seem to be using tabs instead of spaces, please check 
> that you have spaces and your items are lined up. Yocto uses 4 spaces 
> for python and bb recipes and tabs for shell scripts and shell 
> functions in bb recipes.
>
> As has already been noted in a couple of places, ensure that you only 
> install things pam specific when the pam DISTRO_FEATURE is enabled, 
> there are multiple places that need this (not just the ones already 
> noted).
>
> Worth noting here also make sure you check all your PR bumps are correct.
>

Hi Saul,

We will check the commits and send them again. Thanks for you comments.

> Commit messages and comments for things to oe-core should talk about 
> oe-core not yocto or poky as this upsets people ;-)

I am a little confused about this. Do you mean the commits about 
packages under directory meta/ should use word "oe-core" rather than 
Yocto? Would you like to tell me that how do you merge the commits, 
merge the commits to the oe-core master first and then merge the oe-core 
master to Yocto master or some branch?

At the same time, tests we did are based on core-image-sato/lsb. Should 
we test them again base on the image create by oe-core?

>
> I am going to hold of on taking this series until you fix it up.
>
> Sau!
>

Regards,
Kai

>
>
>> The following changes since commit 
>> fa4bcfdb73167f8159b88e5a4d711c0d37627a70:
>>
>> bb-matrix: correct BB and PM number canonicalization (2011-07-14 
>> 22:23:09 +0100)
>>
>> are available in the git repository at:
>> git://git.pokylinux.org/poky-contrib kangkai/distro
>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=kangkai/pam-commits
>>
>> Kang Kai (5):
>> libpam: update to 1.1.4 and add subpackage xtests
>> cups: add pam support
>> screen: add pam support
>> sudo: add pam support
>> shadow: update pam related configure files
>>
>> Wenzong Fan (2):
>> cronie: enable PAM support for cronie
>> at: enable pam support
>>
>> Xiaofeng Yan (3):
>> dropbear: Support PAM
>> openssh: Support PAM
>> polkit: Support PAM
>>
>> .../openssh/openssh-5.8p2/sshd | 10 +
>> meta/recipes-connectivity/openssh/openssh_5.8p2.bb | 7 +-
>> meta/recipes-core/dropbear/dropbear.inc | 6 +-
>> .../dropbear/dropbear/dropbear-enable-pam.patch | 21 +++
>> .../at/at-3.1.12/configure-add-enable-pam.patch | 23 +++
>> meta/recipes-extended/at/at-3.1.12/pam.conf.patch | 16 ++
>> meta/recipes-extended/at/at_3.1.12.bb | 13 +-
>> .../cronie/cronie/crond_pam_config.patch | 13 ++
>> meta/recipes-extended/cronie/cronie_1.4.7.bb | 9 +-
>> meta/recipes-extended/cups/cups_1.4.6.bb | 8 +-
>> .../pam/libpam/libpam-xtests.patch | 35 ++++
>> .../pam/{libpam_1.1.3.bb => libpam_1.1.4.bb} | 14 +-
>> .../polkit/polkit-0.101/polkit-1_pam.patch | 23 +++
>> meta/recipes-extended/polkit/polkit_0.101.bb | 6 +-
>> .../screen/screen-4.0.3/screen.pamd | 2 +
>> meta/recipes-extended/screen/screen_4.0.3.bb | 14 +-
>> .../shadow/files/shadow-update-pam-conf.patch | 175 ++++++++++++++++++++
>> meta/recipes-extended/shadow/shadow_4.1.4.3.bb | 5 +-
>> meta/recipes-extended/sudo/files/sudo.pamd | 6 +
>> meta/recipes-extended/sudo/sudo_1.8.1p2.bb | 11 +-
>> 20 files changed, 389 insertions(+), 28 deletions(-)
>> create mode 100644 meta/recipes-connectivity/openssh/openssh-5.8p2/sshd
>> create mode 100644 
>> meta/recipes-core/dropbear/dropbear/dropbear-enable-pam.patch
>> create mode 100644 
>> meta/recipes-extended/at/at-3.1.12/configure-add-enable-pam.patch
>> create mode 100644 meta/recipes-extended/at/at-3.1.12/pam.conf.patch
>> create mode 100644 
>> meta/recipes-extended/cronie/cronie/crond_pam_config.patch
>> create mode 100644 meta/recipes-extended/pam/libpam/libpam-xtests.patch
>> rename meta/recipes-extended/pam/{libpam_1.1.3.bb => libpam_1.1.4.bb} 
>> (85%)
>> create mode 100644 
>> meta/recipes-extended/polkit/polkit-0.101/polkit-1_pam.patch
>> create mode 100644 meta/recipes-extended/screen/screen-4.0.3/screen.pamd
>> create mode 100644 
>> meta/recipes-extended/shadow/files/shadow-update-pam-conf.patch
>> create mode 100644 meta/recipes-extended/sudo/files/sudo.pamd
>>





More information about the Openembedded-core mailing list