[OE-core] [PATCH] sysvinitL split inittab into it's own recipe
Saul Wold
sgw at linux.intel.com
Wed Jun 8 07:29:10 UTC 2011
On 06/07/2011 11:26 PM, Koen Kooi wrote:
> ping
>
Yes, It's been on my list since Sunday when I started to pull things
together for this week. Please have a little patience. Its in the
master_under_test and will likely be part of the next CONSOLIDATED PULL.
Please give us a few of working days to pull things through.
Thanks
Sau!
> Op 4 jun 2011, om 11:21 heeft Koen Kooi het volgende geschreven:
>
>> A proper fix for
>>
>> [YOCTO ##1131]
>>
>> Signed-off-by:<koen at dominion.thruhere.net>
>> ---
>> .../recipes-core/sysvinit/sysvinit-inittab/inittab | 30 +++++++++++
>> .../sysvinit/sysvinit-inittab_2.88dsf.bb | 55 ++++++++++++++++++++
>> meta/recipes-core/sysvinit/sysvinit/inittab | 30 -----------
>> meta/recipes-core/sysvinit/sysvinit_2.88dsf.bb | 41 +--------------
>> 4 files changed, 86 insertions(+), 70 deletions(-)
>> create mode 100644 meta/recipes-core/sysvinit/sysvinit-inittab/inittab
>> create mode 100644 meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb
>> delete mode 100644 meta/recipes-core/sysvinit/sysvinit/inittab
>>
>> diff --git a/meta/recipes-core/sysvinit/sysvinit-inittab/inittab b/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
>> new file mode 100644
>> index 0000000..6abbdf4
>> --- /dev/null
>> +++ b/meta/recipes-core/sysvinit/sysvinit-inittab/inittab
>> @@ -0,0 +1,30 @@
>> +# /etc/inittab: init(8) configuration.
>> +# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
>> +
>> +# The default runlevel.
>> +id:5:initdefault:
>> +
>> +# Boot-time system configuration/initialization script.
>> +# This is run first except when booting in emergency (-b) mode.
>> +si::sysinit:/etc/init.d/rcS
>> +
>> +# What to do in single-user mode.
>> +~~:S:wait:/sbin/sulogin
>> +
>> +# /etc/init.d executes the S and K scripts upon change
>> +# of runlevel.
>> +#
>> +# Runlevel 0 is halt.
>> +# Runlevel 1 is single-user.
>> +# Runlevels 2-5 are multi-user.
>> +# Runlevel 6 is reboot.
>> +
>> +l0:0:wait:/etc/init.d/rc 0
>> +l1:1:wait:/etc/init.d/rc 1
>> +l2:2:wait:/etc/init.d/rc 2
>> +l3:3:wait:/etc/init.d/rc 3
>> +l4:4:wait:/etc/init.d/rc 4
>> +l5:5:wait:/etc/init.d/rc 5
>> +l6:6:wait:/etc/init.d/rc 6
>> +# Normally not reached, but fallthrough in case of emergency.
>> +z6:6:respawn:/sbin/sulogin
>> diff --git a/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb b/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb
>> new file mode 100644
>> index 0000000..4e57b5a
>> --- /dev/null
>> +++ b/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb
>> @@ -0,0 +1,55 @@
>> +DESCRIPTION = "Inittab for sysvinit"
>> +LICENSE = "GPLv2+"
>> +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe \
>> + file://COPYRIGHT;endline=15;md5=349c872e0066155e1818b786938876a4"
>> +
>> +PR = "r5"
>> +
>> +# Need the whole source for the license checks
>> +SRC_URI = "http://download.savannah.gnu.org/releases-noredirect/sysvinit/sysvinit-${PV}.tar.bz2 \
>> + file://inittab"
>> +
>> +SRC_URI[md5sum] = "6eda8a97b86e0a6f59dabbf25202aa6f"
>> +SRC_URI[sha256sum] = "60bbc8c1e1792056e23761d22960b30bb13eccc2cabff8c7310a01f4d5df1519"
>> +
>> +S = "${WORKDIR}/sysvinit-${PV}"
>> +
>> +do_install() {
>> + install -d ${D}${sysconfdir}
>> + install -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab
>> + if [ ! -z "${SERIAL_CONSOLE}" ]; then
>> + echo "S:2345:respawn:${base_sbindir}/getty ${SERIAL_CONSOLE}">> ${D}${sysconfdir}/inittab
>> + fi
>> + if [ "${USE_VT}" = "1" ]; then
>> + cat<<EOF>>${D}${sysconfdir}/inittab
>> +# ${base_sbindir}/getty invocations for the runlevels.
>> +#
>> +# The "id" field MUST be the same as the last
>> +# characters of the device (after "tty").
>> +#
>> +# Format:
>> +#<id>:<runlevels>:<action>:<process>
>> +#
>> +
>> +EOF
>> +
>> + for n in ${SYSVINIT_ENABLED_GETTYS}
>> + do
>> + echo "$n:2345:respawn:${base_sbindir}/getty 38400 tty$n">> ${D}${sysconfdir}/inittab
>> + done
>> + echo "">> ${D}${sysconfdir}/inittab
>> + fi
>> +}
>> +
>> +# USE_VT and SERIAL_CONSOLE are generally defined by the MACHINE .conf.
>> +# Set PACKAGE_ARCH appropriately.
>> +PACKAGE_ARCH = "${MACHINE_ARCH}"
>> +
>> +FILES_${PN} = "${sysconfdir}/inittab"
>> +CONFFILES_${PN} = "${sysconfdir}/inittab"
>> +
>> +USE_VT ?= "1"
>> +SYSVINIT_ENABLED_GETTYS ?= "1"
>> +
>> +
>> +
>> diff --git a/meta/recipes-core/sysvinit/sysvinit/inittab b/meta/recipes-core/sysvinit/sysvinit/inittab
>> deleted file mode 100644
>> index 6abbdf4..0000000
>> --- a/meta/recipes-core/sysvinit/sysvinit/inittab
>> +++ /dev/null
>> @@ -1,30 +0,0 @@
>> -# /etc/inittab: init(8) configuration.
>> -# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
>> -
>> -# The default runlevel.
>> -id:5:initdefault:
>> -
>> -# Boot-time system configuration/initialization script.
>> -# This is run first except when booting in emergency (-b) mode.
>> -si::sysinit:/etc/init.d/rcS
>> -
>> -# What to do in single-user mode.
>> -~~:S:wait:/sbin/sulogin
>> -
>> -# /etc/init.d executes the S and K scripts upon change
>> -# of runlevel.
>> -#
>> -# Runlevel 0 is halt.
>> -# Runlevel 1 is single-user.
>> -# Runlevels 2-5 are multi-user.
>> -# Runlevel 6 is reboot.
>> -
>> -l0:0:wait:/etc/init.d/rc 0
>> -l1:1:wait:/etc/init.d/rc 1
>> -l2:2:wait:/etc/init.d/rc 2
>> -l3:3:wait:/etc/init.d/rc 3
>> -l4:4:wait:/etc/init.d/rc 4
>> -l5:5:wait:/etc/init.d/rc 5
>> -l6:6:wait:/etc/init.d/rc 6
>> -# Normally not reached, but fallthrough in case of emergency.
>> -z6:6:respawn:/sbin/sulogin
>> diff --git a/meta/recipes-core/sysvinit/sysvinit_2.88dsf.bb b/meta/recipes-core/sysvinit/sysvinit_2.88dsf.bb
>> index e683cc7..bda8a51 100644
>> --- a/meta/recipes-core/sysvinit/sysvinit_2.88dsf.bb
>> +++ b/meta/recipes-core/sysvinit/sysvinit_2.88dsf.bb
>> @@ -5,31 +5,15 @@ SECTION = "base"
>> LICENSE = "GPLv2+"
>> LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe \
>> file://COPYRIGHT;endline=15;md5=349c872e0066155e1818b786938876a4"
>> -PR = "r3"
>> -
>> -# Need to set this since it has machine specific components
>> -PACKAGE_ARCH = "${MACHINE_ARCH}"
>> -
>> -# USE_VT and SERIAL_CONSOLE are generally defined by the MACHINE .conf.
>> -# Set PACKAGE_ARCH appropriately.
>> -PACKAGE_ARCH_${PN}-inittab = "${MACHINE_ARCH}"
>> +PR = "r4"
>>
>> RDEPENDS_${PN} = "${PN}-inittab"
>>
>> -PACKAGES =+ "bootlogd ${PN}-inittab"
>> -FILES_bootlogd = "/etc/init.d/bootlogd /etc/init.d/stop-bootlogd /etc/rc?.d/S*bootlogd /sbin/bootlogd"
>> -FILES_${PN}-inittab = "${sysconfdir}/inittab"
>> -CONFFILES_${PN}-inittab = "${sysconfdir}/inittab"
>> -
>> -USE_VT ?= "1"
>> -SYSVINIT_ENABLED_GETTYS ?= "1"
>> -
>> SRC_URI = "http://download.savannah.gnu.org/releases-noredirect/sysvinit/sysvinit-${PV}.tar.bz2 \
>> file://install.patch \
>> file://crypt-lib.patch \
>> file://need \
>> file://provide \
>> - file://inittab \
>> file://rcS-default \
>> file://rc \
>> file://rcS \
>> @@ -70,29 +54,6 @@ do_install () {
>> install -d ${D}${sysconfdir} \
>> ${D}${sysconfdir}/default \
>> ${D}${sysconfdir}/init.d
>> - install -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab
>> - if [ ! -z "${SERIAL_CONSOLE}" ]; then
>> - echo "S:2345:respawn:${base_sbindir}/getty ${SERIAL_CONSOLE}">> ${D}${sysconfdir}/inittab
>> - fi
>> - if [ "${USE_VT}" = "1" ]; then
>> - cat<<EOF>>${D}${sysconfdir}/inittab
>> -# ${base_sbindir}/getty invocations for the runlevels.
>> -#
>> -# The "id" field MUST be the same as the last
>> -# characters of the device (after "tty").
>> -#
>> -# Format:
>> -#<id>:<runlevels>:<action>:<process>
>> -#
>> -
>> -EOF
>> -
>> - for n in ${SYSVINIT_ENABLED_GETTYS}
>> - do
>> - echo "$n:2345:respawn:${base_sbindir}/getty 38400 tty$n">> ${D}${sysconfdir}/inittab
>> - done
>> - echo "">> ${D}${sysconfdir}/inittab
>> - fi
>> install -m 0644 ${WORKDIR}/rcS-default ${D}${sysconfdir}/default/rcS
>> install -m 0755 ${WORKDIR}/rc ${D}${sysconfdir}/init.d
>> install -m 0755 ${WORKDIR}/rcS ${D}${sysconfdir}/init.d
>> --
>> 1.6.6.1
>>
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
More information about the Openembedded-core
mailing list