[OE-core] [poky] GCC 4.6.0 on ARM?

[Gary Thomas]

On 05/16/2011 03:26 PM, Kamble, Nitin A wrote:
> Gary,
>   I tried with qemuarm machine in the yocto tree. And I find the usb devices are working when compiled with gcc 4.6.0

Can you try it on the beagleboard?

Also, it's not that the USB device isn't found, rather no devices connected to
the USB bus are discovered.

> root at qemuarm:~# usb-devices
>
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=1d6b ProdID=0001 Rev=02.06
> S:  Manufacturer=Linux 2.6.37.6-yocto-standard+ ohci_hcd
> S:  Product=OHCI Host Controller
> S:  SerialNumber=0000:00:0c.0
> C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
>
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=056a ProdID=0000 Rev=42.10
> S:  Manufacturer=QEMU 0.14.0
> S:  Product=Wacom PenPartner
> S:  SerialNumber=1
> C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=80mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=wacom
>
> root at qemuarm:~# dmesg | head
> Linux version 2.6.37.6-yocto-standard+ (nitin at nbuild2.sc.intel.com) (gcc version 4.6.0 (GCC) ) #1 PREEMPT Fri May 13 13:55:35 PDT 2011
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
> CPU: VIVT data cache, VIVT instruction cache
> Machine: ARM-Versatile PB
> Memory policy: ECC disabled, Data cache writeback
> On node 0 totalpages: 32768
> free_area_init_node: node 0, pgdat c05640c0, node_mem_map c05c0000
>    Normal zone: 256 pages used for memmap
>    Normal zone: 0 pages reserved
>    Normal zone: 32512 pages, LIFO batch:7
>
>
>
>> -----Original Message-----
>> From: Gary Thomas [mailto:gary at mlbassoc.com]
>> Sent: Wednesday, May 11, 2011 8:40 AM
>> To: Kamble, Nitin A
>> Cc: Khem Raj; Poky Project; Patches and discussions about the oe-core
>> layer
>> Subject: Re: [poky] GCC 4.6.0 on ARM?
>>
>> On 05/11/2011 09:35 AM, Kamble, Nitin A wrote:
>>>> Yes, that's the only change.  Building the kernel from the same
>>>> source repository with 4.5.2 (using patches from you and Khem Raj)
>>>> works perfectly.
>>>>
>>> Hi Gary,
>>>     The yocto-linux kernel had to go through few changes to mute some
>> compiler warnings with gcc 4.6.0. Are you building your own kernel?
>>
>> Yes.  It's roughly based on the Angstrom 2.6.37 with BeagleBoard
>> support (I have additional OMAP boards which are not in the public
>> tree).

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------