[OE-core] [PATCH 0/3] [RFC] enable Pegasus touch screen
Tom Zanussi
tom.zanussi at intel.com
Tue Sep 27 20:08:49 UTC 2011
On Mon, 2011-09-26 at 18:03 -0700, Zhai, Edwin wrote:
> From: Zhai Edwin <edwin.zhai at intel.com>
>
> Tom,
> These changes, based on meta-intel/tzanussi/pegasus, are needed to enable
> eGalax touch screen on Pegasus. Could you pls. help to review?
>
Hi Edwin,
First, I don't think this is the correct list for meta-intel stuff,
please use the yocto list.
Anyway, the first two patches look ok to me, but the 3rd seems to be a
combination of what it says in the title, enabling touch screen kernel
config, and updating the BSP to work with the current kernel recipes.
The latter should I think be squashed into the base BSP, which isn't
posted.
> When will you push Pegasus changes into meta-intel/master? We can have a common
> place for people to try pegasus...
>
The meta-pegasus you pointed to seems to be an old version, basically
the same prototype version I gave you for the demo. I thought the
current one had been updated to address the comments from the quick
review of Aug 9:
- meta-pegasus - commented-out stuff in pegasus.conf, xorg.conf,
linux-yocto-2.6.37.bbappend, ReleaseNotes are unrelated to the BSP, etc.
Also, it has a blacksand.pdf and has old kernel recipes, etc.
Basically, it needs to be cleaned up a bit before it can be pulled in,
and should be buildable without relying on later patches.
Also, I'm wondering if there's a reason it's using 2.6.37 - we're at 3.0
now, and it would be good if it used that.
Finally, please also add yourself or whoever will be the maintainer
going forward to meta-intel/MAINTAINERS...
Thanks,
Tom
> Thanks,
> Edwin
>
> The following changes since commit 59dc67f6e64a836fc01fa91a1200e76264bb954d:
>
> meta-pegasus: new layer for Pegasus (N455) systems (2011-06-15 23:27:47 -0500)
>
> are available in the git repository at:
> git://git.pokylinux.org/poky-contrib gzhai/pegasus
> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=gzhai/pegasus
>
> Zhai Edwin (3):
> eGalax touchscreen offical xorg driver
> Config xorg.conf with eGalax touchscreen input driver
> Enabled kernel module for eGalax touch screen.
>
> meta-pegasus/conf/machine/pegasus.conf | 2 +-
> .../xf86-input-egalax/88eGalaxCalibrate.sh | 5 ++
> .../xorg-driver/xf86-input-egalax_3.06.5605.bb | 49 ++++++++++++++++++++
> .../xserver-xf86-config/pegasus/xorg.conf | 10 ++++
> .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 2 +
> .../recipes-kernel/linux/linux-yocto/pegasus.cfg | 4 ++
> .../linux/linux-yocto_2.6.37.bbappend | 12 +++++
> 7 files changed, 83 insertions(+), 1 deletions(-)
> create mode 100755 meta-pegasus/recipes-graphics/xorg-driver/xf86-input-egalax/88eGalaxCalibrate.sh
> create mode 100644 meta-pegasus/recipes-graphics/xorg-driver/xf86-input-egalax_3.06.5605.bb
> create mode 100644 meta-pegasus/recipes-kernel/linux/linux-yocto/pegasus.cfg
> create mode 100644 meta-pegasus/recipes-kernel/linux/linux-yocto_2.6.37.bbappend
>
More information about the Openembedded-core
mailing list