[OE-core] using an external (arm) toolchain - just checking i did this properly
McClintock Matthew-B29882
B29882 at freescale.com
Wed Aug 1 23:40:00 UTC 2012
On Wed, Aug 1, 2012 at 6:36 PM, Robert P. J. Day <rpjday at crashcourse.ca> wrote:
>
> having never used an external toolchain to build an OE image, i
> figured i'd give it a shot to build for qemuarm so, based on *minutes*
> of research to see what it would take to use one from code sourcery,
> what i came up with was:
>
> 1) download arm-2009q1-203-arm-none-linux-gnueabi.bin and run it to
> install arm toolchain into a personal directory
>
> 2) add the following to my local.conf:
>
> TCMODE = "external-sourcery"
> EXTERNAL_TOOLCHAIN = "/home/rpjday/CodeSourcery/Sourcery_G++_Lite"
>
> and that would appear to be it. i'm going to poke around the recipe
> files to see *how* using an external toolchain is supported but is the
> above fundamentally correct for just using this one? thanks.
That worked for me.
-M
>
> rday
>
> --
>
> ========================================================================
> Robert P. J. Day Ottawa, Ontario, CANADA
> http://crashcourse.ca
>
> Twitter: http://twitter.com/rpjday
> LinkedIn: http://ca.linkedin.com/in/rpjday
> ========================================================================
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
More information about the Openembedded-core
mailing list