[OE-core] [PATCH 0/6] Integrate Smart for RPM image generation

[Mark Hatle]

On 12/5/12 11:08 PM, Saul Wold wrote:
> On 12/04/2012 11:49 AM, Mark Hatle wrote:
>> The following patch set relies on the previous "Misc fixes" sent out earlier
>> today.
>>
>> The set replaces the existing rootfs generation with one based on Smart.
>> The work was tested using buildhistory over a wide range of image types:
>> core-image-minimal
>> core-image-base
>> core-image-basic
>> core-image-lsb
>> core-image-sato
>> build-appliance
>>
> Did you try with the DISTRO = poky-lsb when doing the lsb build?  There
> are failures across the board with the LSB builds, see this example:

There is no poky-lsb within oe-core, so no I did not.

Do you have a branch with this integrated into Poky, if so I can try to 
reproduce it locally.

--Mark

> http://autobuilder.yoctoproject.org:8010/builders/nightly-x86-64-lsb/builds/146/steps/shell_29/logs/stdio
>
>
> The failure seems to be on psplash:
> | Error: psplash not found in the base feeds (qemux86_64 x86_64 noarch
> any all).
> | ERROR: Function failed: do_rootfs (see
> /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86-64-lsb/build/build/tmp/work/qemux86_64-poky-linux/core-image-lsb-dev/1.0-r0/temp/log.do_rootfs.10377
> for further information)
> NOTE: recipe core-image-lsb-dev-1.0-r0: task do_rootfs: Failed
>
> Can you look into this before we integrate into master
>
> Thanks
> 	Sau!
>
>
>
>> Each of which contained minor changes from the former version, but the changes
>> can all be explained by a different package resolver.
>>
>> Multilib configurations of each of the above images were also verified on
>> qemux86_64 configuration with a few lib32 items added to the mix.  This was
>> shown, by buildhistory, to result in a more compact install solution.
>>
>> "populate_sdk" was also verified after this patch.  Buildhistory does not
>> verify SDKs, so these were verified by hand.  The target items all appeared
>> to match the expected image components.
>>
>> The incremental RPM installation code was verified as well.. This code was
>> verified in both multilib and non-multilib configurations.
>>
>> Finally, each of these were verified on: qemux86_64, qemumips, qemuppc, qemuarm,
>> and qemuarm configured w/ hardware float API.  This verifies that both the
>> ARM specific "gnueabi" issues and the _ to - in the arch names both work
>> properly.
>>
>> The following changes since commit 0c69e555dda2fa412ba12fa90886b0b92dc60e44:
>>
>>     license.bbclass: Avoid grep error message (2012-12-04 11:10:18 -0600)
>>
>> are available in the git repository at:
>>     git://git.yoctoproject.org/poky-contrib mhatle/smart
>>     http://git.yoctoproject.org/cgit.cgi//log/?h=mhatle/smart
>>
>> Mark Hatle (4):
>>     rootfs_rpm.bbclass: Revert to default shell logging behavior
>>     package_rpm: Update the way the multilib package names are translated
>>     package_rpm.bbclass: Add additional logging
>>     package_rpm.bbclass: Add support for incremental installs
>>
>> Paul Eggleton (2):
>>     classes/*_rpm: integrate Smart into RPM filesystem construction
>>     classes/rootfs_rpm: install smart instead of zypper in rpm-based
>>       images
>>
>>    meta/classes/package_rpm.bbclass      |  691 +++++++++++++--------------------
>>    meta/classes/populate_sdk_rpm.bbclass |   74 ++---
>>    meta/classes/rootfs_rpm.bbclass       |   86 ++---
>>    3 files changed, 338 insertions(+), 513 deletions(-)
>>