[OE-core] [PATCH 0/6] Integrate Smart for RPM image generation

[Saul Wold]

There still seems to be a problem with the multilib build that I believe 
comes from this set of changes.

> | Running intercept scripts:
> | WARNING: The license listed MIT was not in the licenses collected for lib32-packagegroup-core-boot
> | ls: cannot access /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-multilib/build/build/tmp/pkgdata/*/runtime-reverse/udev-extraconf: No such file or directory
> | readlink: missing operand
> | Try `readlink --help' for more information.
> | basename: missing operand
> | Try `basename --help' for more information.
> | ERROR: Function failed: do_rootfs (see /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-multilib/build/build/tmp/work/qemux86_64-poky-linux/lib32-core-image-minimal/1.0-r0/temp/log.do_rootfs.14393 for further information)
> NOTE: recipe lib32-core-image-minimal-1.0-r0: task do_rootfs: Failed
> ERROR: Task 7 (virtual:multilib:lib32:/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-multilib/build/meta/recipes-core/images/core-image-minimal.bb, do_rootfs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 1867 tasks of which 425 didn't need to be rerun and 1 failed.

Sau!


On 12/04/2012 11:49 AM, Mark Hatle wrote:
> The following patch set relies on the previous "Misc fixes" sent out earlier
> today.
>
> The set replaces the existing rootfs generation with one based on Smart.
> The work was tested using buildhistory over a wide range of image types:
> core-image-minimal
> core-image-base
> core-image-basic
> core-image-lsb
> core-image-sato
> build-appliance
>
> Each of which contained minor changes from the former version, but the changes
> can all be explained by a different package resolver.
>
> Multilib configurations of each of the above images were also verified on
> qemux86_64 configuration with a few lib32 items added to the mix.  This was
> shown, by buildhistory, to result in a more compact install solution.
>
> "populate_sdk" was also verified after this patch.  Buildhistory does not
> verify SDKs, so these were verified by hand.  The target items all appeared
> to match the expected image components.
>
> The incremental RPM installation code was verified as well.. This code was
> verified in both multilib and non-multilib configurations.
>
> Finally, each of these were verified on: qemux86_64, qemumips, qemuppc, qemuarm,
> and qemuarm configured w/ hardware float API.  This verifies that both the
> ARM specific "gnueabi" issues and the _ to - in the arch names both work
> properly.
>
> The following changes since commit 0c69e555dda2fa412ba12fa90886b0b92dc60e44:
>
>    license.bbclass: Avoid grep error message (2012-12-04 11:10:18 -0600)
>
> are available in the git repository at:
>    git://git.yoctoproject.org/poky-contrib mhatle/smart
>    http://git.yoctoproject.org/cgit.cgi//log/?h=mhatle/smart
>
> Mark Hatle (4):
>    rootfs_rpm.bbclass: Revert to default shell logging behavior
>    package_rpm: Update the way the multilib package names are translated
>    package_rpm.bbclass: Add additional logging
>    package_rpm.bbclass: Add support for incremental installs
>
> Paul Eggleton (2):
>    classes/*_rpm: integrate Smart into RPM filesystem construction
>    classes/rootfs_rpm: install smart instead of zypper in rpm-based
>      images
>
>   meta/classes/package_rpm.bbclass      |  691 +++++++++++++--------------------
>   meta/classes/populate_sdk_rpm.bbclass |   74 ++---
>   meta/classes/rootfs_rpm.bbclass       |   86 ++---
>   3 files changed, 338 insertions(+), 513 deletions(-)
>