[OE-core] [PATCH 1/2] initscripts: support read-only rootfs
ChenQi
Qi.Chen at windriver.com
Mon Dec 24 08:24:41 UTC 2012
On 12/24/2012 04:14 PM, Martin Jansa wrote:
> On Mon, Dec 24, 2012 at 03:54:53PM +0800, Qi.Chen at windriver.com wrote:
>> From: Chen Qi<Qi.Chen at windriver.com>
>>
>> Add read-only rootfs support to sysvinit startup system.
>>
>> The main ideas here are:
>> 1) Let populate-volatile.sh run at rootfs time to set up basic
>> directories and files needed by read-only rootfs.
>> 2) Use symbolic links to create the illusion that some directories/files
>> are writable.
>>
>> Two extra config files for read-only rootfs support are created, one for
>> minimal image -- volatiles-readonly-minimal, and the other for sato
>> image -- volatiles-readonly-sato.
> What if you build base-files/initscripts for image with read-only-rootfs
> and then you build another image without read-only-rootfs?
>
> The way you're using it, it's more like DISTRO_FEATURE then
> IMAGE_FEATURE.
>
> For this to work as IMAGE_FEATURE you would need to adjust it in
> ROOTFS_POSTPROCESS_COMMAND, which is usually bad when
> base-files/initscripts are later updated by package-manager (loose
> read-only-rootfs changes) but that probably isn't issue here as it's
> read-only.
>
> Cheers,
>
Thanks a lot for your prompt reply :)
I'll rework on this patch and send out a V2.
Thanks,
Chen Qi
>> [YOCTO #3404]
>> [YOCTO #3406]
>>
>> Signed-off-by: Chen Qi<Qi.Chen at windriver.com>
>> ---
>> meta/recipes-core/base-files/base-files_3.0.14.bb | 8 +-
>> .../initscripts/initscripts-1.0/bootmisc.sh | 9 +-
>> .../initscripts-1.0/populate-volatile.sh | 285 ++++++++++----------
>> .../initscripts/initscripts-1.0/volatiles | 1 +
>> .../initscripts-1.0/volatiles-readonly-minimal | 23 ++
>> .../initscripts-1.0/volatiles-readonly-sato | 30 +++
>> meta/recipes-core/initscripts/initscripts_1.0.bb | 15 +-
>> 7 files changed, 217 insertions(+), 154 deletions(-)
>> create mode 100644 meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-minimal
>> create mode 100644 meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-sato
>>
>> diff --git a/meta/recipes-core/base-files/base-files_3.0.14.bb b/meta/recipes-core/base-files/base-files_3.0.14.bb
>> index ba355ee..c48cb8c 100644
>> --- a/meta/recipes-core/base-files/base-files_3.0.14.bb
>> +++ b/meta/recipes-core/base-files/base-files_3.0.14.bb
>> @@ -1,7 +1,7 @@
>> SUMMARY = "Miscellaneous files for the base system."
>> DESCRIPTION = "The base-files package creates the basic system directory structure and provides a small set of key configuration files for the system."
>> SECTION = "base"
>> -PR = "r72"
>> +PR = "r73"
>> LICENSE = "GPLv2"
>> LIC_FILES_CHKSUM = "file://licenses/GPL-2;md5=94d55d512a9ba36caa9b7df079bae19f"
>> # Removed all license related tasks in this recipe as license.bbclass
>> @@ -67,6 +67,12 @@ hostname = "openembedded"
>>
>> BASEFILESISSUEINSTALL ?= "do_install_basefilesissue"
>>
>> +do_install_prepend() {
>> + if ${@base_contains("IMAGE_FEATURES", "read-only-rootfs", "true", "false", d)}; then
>> + sed -i '/rootfs/ s/defaults/ro/' ${WORKDIR}/fstab
>> + fi
>> +}
>> +
>> do_install () {
>> for d in ${dirs755}; do
>> install -m 0755 -d ${D}$d
>> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/bootmisc.sh b/meta/recipes-core/initscripts/initscripts-1.0/bootmisc.sh
>> index 4f76cb4..3b5a47f 100755
>> --- a/meta/recipes-core/initscripts/initscripts-1.0/bootmisc.sh
>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/bootmisc.sh
>> @@ -54,14 +54,7 @@ fi
>>
>> #
>> # This is as good a place as any for a sanity check
>> -# /tmp should be a symlink to /var/tmp to cut down on the number
>> -# of mounted ramdisks.
>> -if test ! -L /tmp&& test -d /var/tmp
>> -then
>> - rm -rf /tmp
>> - ln -sf /var/tmp /tmp
>> -fi
>> -
>> +#
>> # Set the system clock from hardware clock
>> # If the timestamp is more recent than the current time,
>> # use the timestamp instead.
>> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/populate-volatile.sh b/meta/recipes-core/initscripts/initscripts-1.0/populate-volatile.sh
>> index d2175d7..9c1ce23 100755
>> --- a/meta/recipes-core/initscripts/initscripts-1.0/populate-volatile.sh
>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/populate-volatile.sh
>> @@ -8,192 +8,191 @@
>> # Short-Description: Populate the volatile filesystem
>> ### END INIT INFO
>>
>> -. /etc/default/rcS
>> -
>> -CFGDIR="/etc/default/volatiles"
>> -TMPROOT="/var/tmp"
>> +# Get ROOT_DIR
>> +DIRNAME=`dirname $0`
>> +ROOT_DIR=`echo $DIRNAME | sed -ne 's:etc/.*::p'`
>> +
>> +. ${ROOT_DIR}/etc/default/rcS
>> +# Test whether rootfs is read-only or not
>> +if> ${ROOT_DIR}/etc/test-read-write; then
>> + ROOTFS_READ_ONLY=no
>> + rm ${ROOT_DIR}/etc/test-read-write
>> +else
>> + ROOTFS_READ_ONLY=yes
>> +fi 2>/dev/null
>> +
>> +# When running populat-volatile.sh at rootfs time, disable cache.
>> +[ "$ROOT_DIR" != "/" ]&& VOLATILE_ENABLE_CACHE=no
>> +# If rootfs is read-only, disable cache.
>> +[ "$ROOTFS_READ_ONLY" = "yes" ]&& VOLATILE_ENABLE_CACHE=no
>> +# All above statements will be moved to a central place, say var.sh which
>> +# encapsulates '. /etc/default/rcS'.
>> +
>> +CFGDIR="${ROOT_DIR}/etc/default/volatiles"
>> +TMPROOT="${ROOT_DIR}/var/volatile/tmp"
>> COREDEF="00_core"
>> +COREDEF_READONLY="00_core_readonly"
>>
>> -[ "${VERBOSE}" != "no" ]&& echo "Populating volatile Filesystems."
>> +[ "${VERBOSE}" != "no" ]&& echo "Setting up basic files related to volatile storage under ${ROOT_DIR}."
>>
>> create_file() {
>> - EXEC="
>> - touch \"$1\";
>> - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\">/dev/tty0 2>&1;
>> - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\">/dev/tty0 2>&1 "
>> + EXEC="
>> + touch \"$1\";
>> + chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\"> /dev/null 2>&1;
>> + chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\"> /dev/null 2>&1 "
>>
>> test "$VOLATILE_ENABLE_CACHE" = yes&& echo "$EXEC">> /etc/volatile.cache.build
>>
>> [ -e "$1" ]&& {
>> - [ "${VERBOSE}" != "no" ]&& echo "Target already exists. Skipping."
>> + [ "${VERBOSE}" != "no" ]&& echo "Target $1 already exists. Skipping."
>> } || {
>> - eval $EXEC&
>> + if [ "$ROOT_DIR" = "/" ]; then
>> + eval $EXEC
>> + else
>> + # Some operations at rootfs time may fail and should fail,
>> + # but these failures should not be logged.
>> + eval $EXEC> /dev/null 2>&1
>> + fi
>> }
>> }
>>
>> mk_dir() {
>> EXEC="
>> mkdir -p \"$1\";
>> - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\">/dev/tty0 2>&1;
>> - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\">/dev/tty0 2>&1 "
>> + chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" 2>&1;
>> + chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" 2>&1 "
>>
>> test "$VOLATILE_ENABLE_CACHE" = yes&& echo "$EXEC">> /etc/volatile.cache.build
>>
>> [ -e "$1" ]&& {
>> - [ "${VERBOSE}" != "no" ]&& echo "Target already exists. Skipping."
>> + [ "${VERBOSE}" != "no" ]&& echo "Target ${1} already exists. Skipping."
>> } || {
>> - eval $EXEC
>> + if [ "$ROOT_DIR" = "/" ]; then
>> + eval $EXEC
>> + else
>> + # Some operations at rootfs time may fail and should fail,
>> + # but these failures should not be logged.
>> + eval $EXEC> /dev/null 2>&1
>> + fi
>> }
>> }
>>
>> link_file() {
>> - EXEC="test -e \"$2\" -o -L $2 || ln -s \"$1\" \"$2\">/dev/tty0 2>&1"
>> -
>> - test "$VOLATILE_ENABLE_CACHE" = yes&& echo " $EXEC">> /etc/volatile.cache.build
>> -
>> - [ -e "$2" ]&& {
>> - echo "Cannot create link over existing -${TNAME}-.">&2
>> - } || {
>> - eval $EXEC&
>> - }
>> + EXEC="
>> + if [ -L \"$2\" ]; then
>> + [ \"$(readlink -f \"$2\")\" != \"$(readlink -f \"$1\")\" ]&& { rm -f \"$2\"; ln -sf \"$1\" \"$2\"; };
>> + elif [ -d \"$2\" ]; then
>> + rm -rf \"$2\";
>> + ln -sf \"$1\" \"$2\";
>> + else
>> + ln -sf \"$1\" \"$2\";
>> + fi
>> + "
>> + test "$VOLATILE_ENABLE_CACHE" = yes&& echo " $EXEC">> /etc/volatile.cache.build
>> + if [ "$ROOT_DIR" = "/" ]; then
>> + eval $EXEC
>> + else
>> + # Some operations at rootfs time may fail and should fail,
>> + # but these failures should not be logged
>> + eval $EXEC> /dev/null 2>&1
>> + fi
>> }
>>
>> check_requirements() {
>> + cleanup() {
>> + rm "${TMP_INTERMED}"
>> + rm "${TMP_DEFINED}"
>> + rm "${TMP_COMBINED}"
>> + }
>> +
>> + CFGFILE="$1"
>> + [ `basename "${CFGFILE}"` = "${COREDEF}" ]&& return 0
>> + [ `basename "${CFGFILE}"` = "${COREDEF_READONLY}" ]&& return 0
>> + TMP_INTERMED="${TMPROOT}/tmp.$$"
>> + TMP_DEFINED="${TMPROOT}/tmpdefined.$$"
>> + TMP_COMBINED="${TMPROOT}/tmpcombined.$$"
>> +
>> + cat ${ROOT_DIR}/etc/passwd | sed 's@\(^:\)*:.*@\1@' | sort | uniq> "${TMP_DEFINED}"
>> + cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 2> "${TMP_INTERMED}"
>> + cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq> "${TMP_COMBINED}"
>> + NR_DEFINED_USERS="`cat "${TMP_DEFINED}" | wc -l`"
>> + NR_COMBINED_USERS="`cat "${TMP_COMBINED}" | wc -l`"
>> +
>> + [ "${NR_DEFINED_USERS}" -ne "${NR_COMBINED_USERS}" ]&& {
>> + echo "Undefined users:"
>> + diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>"
>> + cleanup
>> + return 1
>> + }
>>
>> - cleanup() {
>> - rm "${TMP_INTERMED}"
>> - rm "${TMP_DEFINED}"
>> - rm "${TMP_COMBINED}"
>> - }
>> -
>> - CFGFILE="$1"
>> -
>> - [ `basename "${CFGFILE}"` = "${COREDEF}" ]&& return 0
>> -
>> - TMP_INTERMED="${TMPROOT}/tmp.$$"
>> - TMP_DEFINED="${TMPROOT}/tmpdefined.$$"
>> - TMP_COMBINED="${TMPROOT}/tmpcombined.$$"
>> -
>> -
>> - cat /etc/passwd | sed 's@\(^:\)*:.*@\1@' | sort | uniq> "${TMP_DEFINED}"
>> - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 2> "${TMP_INTERMED}"
>> - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq> "${TMP_COMBINED}"
>> -
>> - NR_DEFINED_USERS="`cat "${TMP_DEFINED}" | wc -l`"
>> - NR_COMBINED_USERS="`cat "${TMP_COMBINED}" | wc -l`"
>> -
>> - [ "${NR_DEFINED_USERS}" -ne "${NR_COMBINED_USERS}" ]&& {
>> - echo "Undefined users:"
>> - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>"
>> - cleanup
>> - return 1
>> - }
>> -
>> -
>> - cat /etc/group | sed 's@\(^:\)*:.*@\1@' | sort | uniq> "${TMP_DEFINED}"
>> - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 3> "${TMP_INTERMED}"
>> - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq> "${TMP_COMBINED}"
>>
>> - NR_DEFINED_GROUPS="`cat "${TMP_DEFINED}" | wc -l`"
>> - NR_COMBINED_GROUPS="`cat "${TMP_COMBINED}" | wc -l`"
>> + cat ${ROOT_DIR}/etc/group | sed 's@\(^:\)*:.*@\1@' | sort | uniq> "${TMP_DEFINED}"
>> + cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 3> "${TMP_INTERMED}"
>> + cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq> "${TMP_COMBINED}"
>>
>> - [ "${NR_DEFINED_GROUPS}" -ne "${NR_COMBINED_GROUPS}" ]&& {
>> - echo "Undefined groups:"
>> - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>"
>> - cleanup
>> - return 1
>> - }
>> + NR_DEFINED_GROUPS="`cat "${TMP_DEFINED}" | wc -l`"
>> + NR_COMBINED_GROUPS="`cat "${TMP_COMBINED}" | wc -l`"
>>
>> - # Add checks for required directories here
>> + [ "${NR_DEFINED_GROUPS}" -ne "${NR_COMBINED_GROUPS}" ]&& {
>> + echo "Undefined groups:"
>> + diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>"
>> + cleanup
>> + return 1
>> + }
>>
>> - cleanup
>> - return 0
>> - }
>> + cleanup
>> + return 0
>> +}
>>
>> apply_cfgfile() {
>> + CFGFILE="$1"
>> + [ ${VERBOSE} != "no" ]&& echo "Applying config file: $CFGFILE"
>> +
>> + check_requirements "${CFGFILE}" || {
>> + echo "Skipping ${CFGFILE}"
>> + return 1
>> + }
>> +
>> + cat ${CFGFILE} | grep -v "^#" | sed -e '/^$/ d' | \
>> + while read LINE; do
>> + eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ \(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 TLTARGET=\6/p"`
>> + TNAME=${ROOT_DIR}/${TNAME}
>> + [ "${VERBOSE}" != "no" ]&& echo "Checking for -${TNAME}-."
>> +
>> + [ "${TTYPE}" = "l" ]&& {
>> + TSOURCE="$TLTARGET"
>> + [ "${VERBOSE}" != "no" ]&& echo "Creating link -${TNAME}- pointing to -${TSOURCE}-."
>> + link_file "${TSOURCE}" "${TNAME}"
>> + continue
>> + }
>> + case "${TTYPE}" in
>> + "f") [ "${VERBOSE}" != "no" ]&& echo "Creating file -${TNAME}-."
>> + create_file "${TNAME}"
>> + ;;
>> + "d") [ "${VERBOSE}" != "no" ]&& echo "Creating directory -${TNAME}-."
>> + mk_dir "${TNAME}"
>> + ;;
>> + *) [ "${VERBOSE}" != "no" ]&& echo "Invalid type -${TTYPE}-."
>> + continue
>> + ;;
>> + esac
>> + done
>> + return 0
>> +}
>>
>> - CFGFILE="$1"
>> -
>> - check_requirements "${CFGFILE}" || {
>> - echo "Skipping ${CFGFILE}"
>> - return 1
>> - }
>> -
>> - cat ${CFGFILE} | grep -v "^#" | \
>> - while read LINE; do
>> -
>> - eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ \(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 TLTARGET=\6/p"`
>> -
>> - [ "${VERBOSE}" != "no" ]&& echo "Checking for -${TNAME}-."
>> -
>> -
>> - [ "${TTYPE}" = "l" ]&& {
>> - TSOURCE="$TLTARGET"
>> - [ -L "${TNAME}" ] || {
>> - [ "${VERBOSE}" != "no" ]&& echo "Creating link -${TNAME}- pointing to -${TSOURCE}-."
>> - link_file "${TSOURCE}" "${TNAME}"&
>> - }
>> - continue
>> - }
>> -
>> - [ -L "${TNAME}" ]&& {
>> - [ "${VERBOSE}" != "no" ]&& echo "Found link."
>> - NEWNAME=`ls -l "${TNAME}" | sed -e 's/^.*-> \(.*\)$/\1/'`
>> - echo ${NEWNAME} | grep -v "^/">/dev/null&& {
>> - TNAME="`echo ${TNAME} | sed -e 's@\(.*\)/.*@\1@'`/${NEWNAME}"
>> - [ "${VERBOSE}" != "no" ]&& echo "Converted relative linktarget to absolute path -${TNAME}-."
>> - } || {
>> - TNAME="${NEWNAME}"
>> - [ "${VERBOSE}" != "no" ]&& echo "Using absolute link target -${TNAME}-."
>> - }
>> - }
>> -
>> - case "${TTYPE}" in
>> - "f") [ "${VERBOSE}" != "no" ]&& echo "Creating file -${TNAME}-."
>> - create_file "${TNAME}"&
>> - ;;
>> - "d") [ "${VERBOSE}" != "no" ]&& echo "Creating directory -${TNAME}-."
>> - mk_dir "${TNAME}"
>> - # Add check to see if there's an entry in fstab to mount.
>> - ;;
>> - *) [ "${VERBOSE}" != "no" ]&& echo "Invalid type -${TTYPE}-."
>> - continue
>> - ;;
>> - esac
>> -
>> -
>> - done
>> -
>> - return 0
>> -
>> - }
>> -
>> -clearcache=0
>> -exec 9</proc/cmdline
>> -while read line<&9
>> -do
>> - case "$line" in
>> - *clearcache*) clearcache=1
>> - ;;
>> - *) continue
>> - ;;
>> - esac
>> -done
>> -exec 9>&-
>> -
>> -if test -e /etc/volatile.cache -a "$VOLATILE_ENABLE_CACHE" = "yes" -a "x$1" != "xupdate" -a "x$clearcache" = "x0"
>> +if test -e ${ROOT_DIR}/etc/volatile.cache -a $VOLATILE_ENABLE_CACHE = yes -a x$1 != xupdate
>> then
>> - sh /etc/volatile.cache
>> + sh ${ROOT_DIR}/etc/volatile.cache
>> else
>> - rm -f /etc/volatile.cache /etc/volatile.cache.build
>> + rm -f ${ROOT_DRI}/etc/volatile.cache ${ROOT_DIR}/etc/volatile.cache.build
>> for file in `ls -1 "${CFGDIR}" | sort`; do
>> apply_cfgfile "${CFGDIR}/${file}"
>> done
>>
>> - [ -e /etc/volatile.cache.build ]&& sync&& mv /etc/volatile.cache.build /etc/volatile.cache
>> + [ -e ${ROOT_DIR}/etc/volatile.cache.build ]&& sync&& mv ${ROOT_DIR}/etc/volatile.cache.build ${ROOT_DIR}/etc/volatile.cache
>> fi
>>
>> -if test -f /etc/ld.so.cache -a ! -f /var/run/ld.so.cache
>> +if [ "${ROOT_DIR}" = "/" ]&& [ -f /etc/ld.so.cache ]&& [ ! -f /var/run/ld.so.cache ]
>> then
>> ln -s /etc/ld.so.cache /var/run/ld.so.cache
>> fi
>> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/volatiles b/meta/recipes-core/initscripts/initscripts-1.0/volatiles
>> index e0741aa..f7e2ef7 100644
>> --- a/meta/recipes-core/initscripts/initscripts-1.0/volatiles
>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/volatiles
>> @@ -31,6 +31,7 @@ l root root 1777 /var/lock /var/volatile/lock
>> l root root 0755 /var/log /var/volatile/log
>> l root root 0755 /var/run /var/volatile/run
>> l root root 1777 /var/tmp /var/volatile/tmp
>> +l root root 1777 /tmp /var/tmp
>> d root root 0755 /var/lock/subsys none
>> f root root 0664 /var/log/wtmp none
>> f root root 0664 /var/run/utmp none
>> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-minimal b/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-minimal
>> new file mode 100644
>> index 0000000..6169ecc
>> --- /dev/null
>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-minimal
>> @@ -0,0 +1,23 @@
>> +# This configuration file lists filesystem objects specific to readonly rootfs
>> +# that should get verified during startup and be created if missing.
>> +#
>> +# Every line must either be a comment starting with #
>> +# or a definition of format:
>> +#<type> <owner> <group> <mode> <path> <linksource>
>> +# where the items are separated by whitespace !
>> +#
>> +#<type> : d|f|l : (d)irectory|(f)ile|(l)ink
>> +#
>> +# A linking example:
>> +# l root root 0777 /var/test /tmp/testfile
>> +# f root root 0644 /var/test none
>> +#
>> +# Understanding links:
>> +# When populate-volatile is to verify/create a directory or file, it will first
>> +# check its existence. If a link is found to exist in the place of the target,
>> +# the path of the target is replaced with the target the link points to.
>> +# Thus, if a link is in the place to be verified, the object will be created
>> +# in the place the link points to instead.
>> +# This explains the order of "link before object" as in the example above, where
>> +# a link will be created at /var/test pointing to /tmp/testfile and due to this
>> +# link the file defined as /var/test will actually be created as /tmp/testfile.
>> diff --git a/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-sato b/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-sato
>> new file mode 100644
>> index 0000000..e128869
>> --- /dev/null
>> +++ b/meta/recipes-core/initscripts/initscripts-1.0/volatiles-readonly-sato
>> @@ -0,0 +1,30 @@
>> +# This configuration file lists filesystem objects specific to readonly rootfs
>> +# that should get verified during startup and be created if missing.
>> +#
>> +# Every line must either be a comment starting with #
>> +# or a definition of format:
>> +#<type> <owner> <group> <mode> <path> <linksource>
>> +# where the items are separated by whitespace !
>> +#
>> +#<type> : d|f|l : (d)irectory|(f)ile|(l)ink
>> +#
>> +# A linking example:
>> +# l root root 0777 /var/test /tmp/testfile
>> +# f root root 0644 /var/test none
>> +#
>> +# Understanding links:
>> +# When populate-volatile is to verify/create a directory or file, it will first
>> +# check it's existence. If a link is found to exist in the place of the target,
>> +# the path of the target is replaced with the target the link points to.
>> +# Thus, if a link is in the place to be verified, the object will be created
>> +# in the place the link points to instead.
>> +# This explains the order of "link before object" as in the example above, where
>> +# a link will be created at /var/test pointing to /tmp/testfile and due to this
>> +# link the file defined as /var/test will actually be created as /tmp/testfile.
>> +d root root 0755 /var/volatile/lib/ none
>> +d root root 0755 /var/volatile/lib/dropbear/ none
>> +d root root 0755 /var/volatile/lib/nfs/ none
>> +d root root 1777 /var/volatile/lib/dbus/ none
>> +l root root 0755 /var/lib/dropbear /var/volatile/lib/dropbear
>> +l root root 0755 /var/lib/nfs /var/volatile/lib/nfs
>> +l root root 0755 /var/lib/dbus /var/volatile/lib/dbus
>> diff --git a/meta/recipes-core/initscripts/initscripts_1.0.bb b/meta/recipes-core/initscripts/initscripts_1.0.bb
>> index 39be9a8..d0869ea 100644
>> --- a/meta/recipes-core/initscripts/initscripts_1.0.bb
>> +++ b/meta/recipes-core/initscripts/initscripts_1.0.bb
>> @@ -3,7 +3,7 @@ DESCRIPTION = "Initscripts provide the basic system startup initialization scrip
>> SECTION = "base"
>> LICENSE = "GPLv2"
>> LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe"
>> -PR = "r138"
>> +PR = "r139"
>>
>> INHIBIT_DEFAULT_DEPS = "1"
>>
>> @@ -30,8 +30,10 @@ SRC_URI = "file://functions \
>> file://device_table.txt \
>> file://populate-volatile.sh \
>> file://volatiles \
>> + file://volatiles-readonly-minimal \
>> + file://volatiles-readonly-sato \
>> file://save-rtc.sh \
>> - file://GPLv2.patch"
>> + file://GPLv2.patch"
>>
>> SRC_URI_append_arm = " file://alignment.sh"
>>
>> @@ -86,6 +88,15 @@ do_install () {
>> install -m 0755 ${WORKDIR}/populate-volatile.sh ${D}${sysconfdir}/init.d
>> install -m 0755 ${WORKDIR}/save-rtc.sh ${D}${sysconfdir}/init.d
>> install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core
>> + # Install read-only rootfs specific config files in case of an read-only-rootfs image
>> + if ${@base_contains("IMAGE_FEATURES", "read-only-rootfs", "true", "false" ,d)}; then
>> + if ${@base_contains("IMAGE_FEATURES", "x11-sato", "true", "false" ,d)}; then
>> + install -m 0644 ${WORKDIR}/volatiles-readonly-sato ${D}${sysconfdir}/default/volatiles/00_core_readonly
>> + else
>> + install -m 0644 ${WORKDIR}/volatiles-readonly-minimal ${D}${sysconfdir}/default/volatiles/00_core_readonly
>> + fi
>> + fi
>> +
>> if [ "${TARGET_ARCH}" = "arm" ]; then
>> install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d
>> fi
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
More information about the Openembedded-core
mailing list