[OE-core] polkit broken?

[Steve Sakoman]

I find that polkit is failing after a pull this morning:

ERROR: Function failed: BUILDSPEC (see
/media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212
for further information)
ERROR: Logfile of failure stored in:
/media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212
Log data follows:
| NOTE: Creating RPM package for polkit-dbg
| NOTE: Creating RPM package for polkit
| NOTE: Creating RPM package for polkit
| NOTE: Creating RPM package for polkit-doc
| NOTE: Creating RPM package for polkit-dev
| NOTE: Creating RPM package for polkit-staticdev
| NOTE: Creating RPM package for polkit-locale-da
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi',
'common']
| ERROR: Function failed: BUILDSPEC (see
/media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212
for further information)
| error: line 24: Illegal char '-' in EVR: Requires: systemd >= v38-53-ga3f914b
| error: Package has no %description: polkit-0.104-r0.armv7a
| Building target platforms: armv7a-vfp-neon-poky-linux-gnueabi
NOTE: package polkit-0.104-r0: task do_package_write_rpm: Failed
ERROR: Task 1059
(/home/sakoman/source/yocto/poky/meta/recipes-extended/polkit/polkit_0.104.bb,
do_package_write_rpm) failed with exit code '1'

My image does include systemd from meta-openembedded so I suspect that
may be a factor.

For those who are building with sysvinti, do you see this issue?

Steve