[OE-core] [PATCH 1/1] EFI: Make installer EFI aware
Saul Wold
sgw at linux.intel.com
Tue Jul 17 19:40:22 UTC 2012
On 07/17/2012 12:29 PM, Darren Hart wrote:
> [YOCTO #1919]
>
> Create a basic EFI installer script modeled after the existing installer
> and add it to a new initramfs-live-install-efi recipe. Update the
> init-live.sh script to distinguish between LABEL=install and
> LABEL=install-efi and select the appropriate script. Add the efi
> installer to core-image-minimal-initramfs.
>
> Update grub-efi.bbclass to use "LABEL=install-efi" when it detects a
> label of "install". This is clearly not ideal, but a proper fix would
> involve decoupling the LABELS assignment from the image-live.bbclass
> usage of SYSLINUX_LABELS. We should be able to address that in a
> follow-on clean-up series.
>
> Signed-off-by: Darren Hart <dvhart at linux.intel.com>
> ---
> meta/classes/grub-efi.bbclass | 2 +
> .../images/core-image-minimal-initramfs.bb | 2 +-
> .../initrdscripts/files/init-install-efi.sh | 188 ++++++++++++++++++++
> meta/recipes-core/initrdscripts/files/init-live.sh | 6 +-
> .../initramfs-live-install-efi_1.0.bb | 22 +++
> 5 files changed, 216 insertions(+), 4 deletions(-)
> create mode 100644 meta/recipes-core/initrdscripts/files/init-install-efi.sh
> create mode 100644 meta/recipes-core/initrdscripts/initramfs-live-install-efi_1.0.bb
>
> diff --git a/meta/classes/grub-efi.bbclass b/meta/classes/grub-efi.bbclass
> index 1efb43b..147accc 100644
> --- a/meta/classes/grub-efi.bbclass
> +++ b/meta/classes/grub-efi.bbclass
> @@ -99,6 +99,8 @@ python build_grub_cfg() {
> bb.data.update_data(localdata)
>
> cfgfile.write('\nmenuentry \'%s\'{\n' % (label))
> + if label == "install":
> + label = "install-efi"
> cfgfile.write('linux /vmlinuz LABEL=%s' % (label))
>
> append = localdata.getVar('APPEND', True)
> diff --git a/meta/recipes-core/images/core-image-minimal-initramfs.bb b/meta/recipes-core/images/core-image-minimal-initramfs.bb
> index 4aeb618..7f6826c 100644
> --- a/meta/recipes-core/images/core-image-minimal-initramfs.bb
> +++ b/meta/recipes-core/images/core-image-minimal-initramfs.bb
> @@ -3,7 +3,7 @@ DESCRIPTION = "Small image capable of booting a device. The kernel includes \
> the Minimal RAM-based Initial Root Filesystem (initramfs), which finds the \
> first “init” program more efficiently."
>
> -IMAGE_INSTALL = "initramfs-live-boot initramfs-live-install busybox udev base-passwd"
> +IMAGE_INSTALL = "initramfs-live-boot initramfs-live-install initramfs-live-install-efi busybox udev base-passwd"
>
> # Do not pollute the initrd image with rootfs features
> IMAGE_FEATURES = ""
Does this now need a PR bump also?
> diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
> new file mode 100644
> index 0000000..c762f4b
> --- /dev/null
> +++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
> @@ -0,0 +1,188 @@
> +#!/bin/sh -e
> +#
> +# Copyright (c) 2012, Intel Corporation.
> +# All rights reserved.
> +#
> +# install.sh [device_name] [rootfs_name] [video_mode] [vga_mode]
> +#
> +
> +PATH=/sbin:/bin:/usr/sbin:/usr/bin
> +
> +# We need 20 Mb for the boot partition
> +boot_size=20
> +
> +# 5% for the swap
> +swap_ratio=5
> +
> +found="no"
> +
> +echo "Searching for a hard drive..."
> +for device in 'hda' 'hdb' 'sda' 'sdb' 'mmcblk0' 'mmcblk1'
> +do
> + if [ -e /sys/block/${device}/removable ]; then
> + if [ "$(cat /sys/block/${device}/removable)" = "0" ]; then
> + found="yes"
> +
> + while true; do
> + # Try sleeping here to avoid getting kernel messages
> + # obscuring/confusing user
> + sleep 5
> + echo "Found drive at /dev/${device}. Do you want to install this image there ? [y/n]"
> + read answer
> + if [ "$answer" = "y" ] ; then
> + break
> + fi
> +
> + if [ "$answer" = "n" ] ; then
> + found=no
> + break
> + fi
> +
> + echo "Please answer y or n"
> + done
> + fi
> + fi
> +
> + if [ "$found" = "yes" ]; then
> + break;
> + fi
> +
> +done
> +
> +if [ "$found" = "no" ]; then
> + exit 1
> +fi
> +
> +echo "Installing image on /dev/${device}"
> +
> +#
> +# The udev automounter can cause pain here, kill it
> +#
> +rm -f /etc/udev/scripts/mount*
> +
> +#
> +# Unmount anything the automounter had mounted
> +#
> +umount /dev/${device}* 2> /dev/null || /bin/true
> +
> +# We always build with devtmpfs, this is not necessary
> +#if [ ! -b /dev/sda ] ; then
> +# mknod /dev/sda b 8 0
> +#fi
> +#
> +#if [ ! -b /dev/sdb ] ; then
> +# mknod /dev/sdb b 8 16
> +#fi
> +#
> +#if [ ! -b /dev/loop0 ] ; then
> +# mknod /dev/loop0 b 7 0
> +#fi
> +
> +mkdir -p /tmp
> +cat /proc/mounts > /etc/mtab
> +
> +disk_size=$(parted /dev/${device} unit mb print | grep Disk | cut -d" " -f 3 | sed -e "s/MB//")
> +
> +swap_size=$((disk_size*swap_ratio/100))
> +rootfs_size=$((disk_size-boot_size-swap_size))
> +
> +rootfs_start=$((boot_size))
> +rootfs_end=$((rootfs_start+rootfs_size))
> +swap_start=$((rootfs_end))
> +
> +# MMC devices are special in a couple of ways
> +# 1) they use a partition prefix character 'p'
> +# 2) they are detected asynchronously (need rootwait)
> +rootwait=""
> +part_prefix=""
> +if [ ! "${device#mmcblk}" = "${device}" ]; then
> + part_prefix="p"
> + rootwait="rootwait"
> +fi
> +bootfs=/dev/${device}${part_prefix}1
> +rootfs=/dev/${device}${part_prefix}2
> +swap=/dev/${device}${part_prefix}3
> +
> +echo "*****************"
> +echo "Boot partition size: $boot_size MB ($bootfs)"
> +echo "Rootfs partition size: $rootfs_size MB ($rootfs)"
> +echo "Swap partition size: $swap_size MB ($swap)"
> +echo "*****************"
> +echo "Deleting partition table on /dev/${device} ..."
> +dd if=/dev/zero of=/dev/${device} bs=512 count=2
> +
> +echo "Creating new partition table on /dev/${device} ..."
> +parted /dev/${device} mklabel gpt
> +
> +echo "Creating boot partition on $bootfs"
> +parted /dev/${device} mkpart primary 0% $boot_size
> +
> +echo "Creating rootfs partition on $rootfs"
> +parted /dev/${device} mkpart primary $rootfs_start $rootfs_end
> +
> +echo "Creating swap partition on $swap"
> +parted /dev/${device} mkpart primary $swap_start 100%
> +
> +parted /dev/${device} print
> +
> +echo "Formatting $bootfs to vfat..."
> +mkfs.vfat $bootfs
> +
> +echo "Formatting $rootfs to ext3..."
> +mkfs.ext3 $rootfs
> +
> +echo "Formatting swap partition...($swap)"
> +mkswap $swap
> +
> +mkdir /ssd
> +mkdir /rootmnt
> +mkdir /bootmnt
> +
> +mount $rootfs /ssd
> +mount -o rw,loop,noatime,nodiratime /media/$1/$2 /rootmnt
> +
> +echo "Copying rootfs files..."
> +cp -a /rootmnt/* /ssd
> +
> +if [ -d /ssd/etc/ ] ; then
> + echo "$swap swap swap defaults 0 0" >> /ssd/etc/fstab
> +
> + # We dont want udev to mount our root device while we're booting...
> + if [ -d /ssd/etc/udev/ ] ; then
> + echo "/dev/${device}" >> /ssd/etc/udev/mount.blacklist
> + fi
> +fi
> +
> +umount /ssd
> +umount /rootmnt
> +
> +echo "Preparing boot partition..."
> +mount $bootfs /ssd
> +
> +EFIDIR="/ssd/EFI/BOOT"
> +mkdir -p $EFIDIR
> +GRUBCFG="$EFIDIR/grub.cfg"
> +
> +cp /media/$1/vmlinuz /ssd
> +# Copy the efi loader and config (booti*.efi and grub.cfg)
> +cp /media/$1/EFI/BOOT/* $EFIDIR
> +
> +# Update grub config for the installed image
> +# Delete the install entry
> +sed -i "/menuentry 'install'/,/^}/d" $GRUBCFG
> +# Delete the initrd lines
> +sed -i "/initrd /d" $GRUBCFG
> +# Delete any LABEL= strings
> +sed -i "s/ LABEL=[^ ]*/ /" $GRUBCFG
> +# Replace the ramdisk root with the install device and include other options
> +sed -i "s@ root=[^ ]*@ root=$rootfs rw $rootwait quiet@" $GRUBCFG
> +
> +umount /ssd
> +sync
> +
> +echo "Remove your installation media, and press ENTER"
> +
> +read enter
> +
> +echo "Rebooting..."
> +reboot -f
> diff --git a/meta/recipes-core/initrdscripts/files/init-live.sh b/meta/recipes-core/initrdscripts/files/init-live.sh
> index 737dae4..d02ed19 100644
> --- a/meta/recipes-core/initrdscripts/files/init-live.sh
> +++ b/meta/recipes-core/initrdscripts/files/init-live.sh
> @@ -110,11 +110,11 @@ case $label in
> fi
> fi
> ;;
> - install)
> + install|install-efi)
> if [ -f /media/$i/$ISOLINUX/$ROOT_IMAGE ] ; then
> - ./install.sh $i/$ISOLINUX $ROOT_IMAGE $video_mode $vga_mode
> + ./$label.sh $i/$ISOLINUX $ROOT_IMAGE $video_mode $vga_mode
> else
> - fatal "Could not find install script"
> + fatal "Could not find $label script"
> fi
>
> # If we're getting here, we failed...
> diff --git a/meta/recipes-core/initrdscripts/initramfs-live-install-efi_1.0.bb b/meta/recipes-core/initrdscripts/initramfs-live-install-efi_1.0.bb
> new file mode 100644
> index 0000000..6696d94
> --- /dev/null
> +++ b/meta/recipes-core/initrdscripts/initramfs-live-install-efi_1.0.bb
> @@ -0,0 +1,22 @@
> +DESCRIPTION = "A live image init script for grub-efi"
> +LICENSE = "MIT"
> +LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
> +SRC_URI = "file://init-install-efi.sh"
> +
> +PR = "r7"
> +
Why PR = r7 for a new recipe, there should be no PR as it defaults to r0?
Sau!
> +RDEPENDS_${PN} = "parted e2fsprogs-mke2fs dosfstools"
> +
> +do_install() {
> + install -m 0755 ${WORKDIR}/init-install-efi.sh ${D}/install-efi.sh
> +}
> +
> +# While this package maybe an allarch due to it being a
> +# simple script, reality is that it is Host specific based
> +# on the COMPATIBLE_HOST below, which needs to take precedence
> +#inherit allarch
> +INHIBIT_DEFAULT_DEPS = "1"
> +
> +FILES_${PN} = " /install-efi.sh "
> +
> +COMPATIBLE_HOST = "(i.86|x86_64).*-linux"
>
More information about the Openembedded-core
mailing list