[OE-core] [PATCH 1/6] self-hosted-image: pre-populate the builder user with poky source

[Cui, Dexuan]

Hi Saul,
Did you test "bitbake core-image-minimal" inside the vmware guest?
I got the following ERROR immediately:

------------------------
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    Pseudo is not functioning correctly, which will cause failures during package installation. Please check your configuration.

ERROR: Execution of event handler 'check_sanity_eventhandler' failed
------------------------

I suspect in the guest, pseudo is not setup properly?

Thanks,
-- Dexuan

> -----Original Message-----
> From: Saul Wold [mailto:sgw at linux.intel.com]
> Sent: Tuesday, March 27, 2012 1:43 PM
> To: openembedded-core at lists.openembedded.org
> Cc: Cui, Dexuan
> Subject: [PATCH 1/6] self-hosted-image: pre-populate the builder user with
> poky source
> 
> From: Dexuan Cui <dexuan.cui at intel.com>
> 
> This patch installs the poky source into the /home/builder/poky/ of the
> self-hosted-image.
> This makes the user of self-hosted-image easier to start a build.
> 
> I think the recent poky master is stable enough, so I specify a commit number
> by SRCREV -- we may want to update this number before releasing 1.2.
> 
> This patch fixes [YOCTO #2065]
> 
> Signed-off-by: Dexuan Cui <dexuan.cui at intel.com>
> 
> Added code for supporting target based pseudo fixed indentation
> 
> Signed-off-by: Saul Wold <sgw at linux.intel.com>
> ---
>  meta/recipes-core/images/self-hosted-image.bb |   41
> +++++++++++++++++++++++-
>  1 files changed, 39 insertions(+), 2 deletions(-)
> 
> diff --git a/meta/recipes-core/images/self-hosted-image.bb
> b/meta/recipes-core/images/self-hosted-image.bb
> index d56c2cb..5aa670d 100644
> --- a/meta/recipes-core/images/self-hosted-image.bb
> +++ b/meta/recipes-core/images/self-hosted-image.bb
> @@ -4,7 +4,7 @@ LICENSE = "MIT"
>  LIC_FILES_CHKSUM =
> "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58 \
> 
> file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de
> 20420"
> 
> -PR = "r5"
> +PR = "r6"
> 
>  CORE_IMAGE_EXTRA_INSTALL = "\
>      task-self-hosted \
> @@ -13,7 +13,10 @@ CORE_IMAGE_EXTRA_INSTALL = "\  IMAGE_FEATURES
> += "x11-mini package-management"
> 
>  # Ensure there's enough space to do a core-image-minimal build, with
> rm_work enabled -IMAGE_ROOTFS_EXTRA_SPACE = "2621440"
> +IMAGE_ROOTFS_EXTRA_SPACE = "1048576"
> +#IMAGE_ROOTFS_EXTRA_SPACE = "2621440"
> +#IMAGE_ROOTFS_EXTRA_SPACE = "20971520"
> +#IMAGE_ROOTFS_EXTRA_SPACE = "5242880"
> 
>  # Do a quiet boot with limited console messages  APPEND += "quiet"
> @@ -21,3 +24,37 @@ APPEND += "quiet"
>  IMAGE_FSTYPES = "vmdk"
> 
>  inherit core-image
> +
> +SRCREV = "26a46938d3ea1821e7bec4fa6cc8379babad238b"
> +SRC_URI = "git://git.yoctoproject.org/poky;protocol=git"
> +
> +fakeroot do_populate_poky_src () {
> +	# Because fetch2's git's unpack uses -s cloneflag, the unpacked git repo
> +	# will become invalid in the target.
> +	rm -rf ${WORKDIR}/git/.git
> +	rm -f ${WORKDIR}/git/.gitignore
> +
> +	cp -Rp ${WORKDIR}/git ${IMAGE_ROOTFS}/home/builder/poky
> +
> +	mkdir -p ${IMAGE_ROOTFS}/home/builder/poky/build/conf
> +	cp -Rp ${DL_DIR} ${IMAGE_ROOTFS}/home/builder/poky/build
> +	echo "/usr/bin" >
> ${IMAGE_ROOTFS}/home/builder/poky/build/pseudodone
> +	echo "BB_NO_NETWORK = \"1\"" >
> ${IMAGE_ROOTFS}/home/builder/poky/build/conf/auto.conf
> +	echo "INHERIT += \"rm_work\"" >>
> ${IMAGE_ROOTFS}/home/builder/poky/build/conf/auto.conf
> +        mkdir -p ${IMAGE_ROOTFS}/home/builder/pseudo
> +        echo "export PSEUDO_PREFIX=/usr" >>
> ${IMAGE_ROOTFS}/home/builder/.bashrc
> +        echo "export PSEUDO_LOCALSTATEDIR=/home/builder/pseudo" >>
> ${IMAGE_ROOTFS}/home/builder/.bashrc
> +        echo "export PSEUDO_LIBDIR=/usr/lib/pseudo/lib64" >>
> +${IMAGE_ROOTFS}/home/builder/.bashrc
> +
> +        chown builder.builder ${IMAGE_ROOTFS}/home/builder/pseudo
> +
> +	chown -R builder.builder  ${IMAGE_ROOTFS}/home/builder/poky }
> +
> +IMAGE_PREPROCESS_COMMAND += "do_populate_poky_src; "
> +
> +python do_get_poky_src () {
> +    bb.build.exec_func('base_do_fetch', d)
> +    bb.build.exec_func('base_do_unpack', d) } addtask do_get_poky_src
> +before do_rootfs
> --
> 1.7.7.6