[OE-core] [oe][PATCH] eglinfo: Add recipes for x11 and fb backends

[Martin Jansa]

On Thu, Apr 04, 2013 at 08:41:39AM -0700, Saul Wold wrote:
> 
> I am going to defer this to 1.5 when it opens up, I still need to review 
> the recipe, but wanted to give you a heads up about the deferral.

It looks like it was deferred too much or is it applied somewhere else?
I don't see it in oe-core.

> 
> 
> Thanks
> 	Sau!
> 
> 
> On 04/03/2013 12:26 PM, Carlos Rafael Giani wrote:
> > eglinfo is a small utility for printing out information about EGL as well
> > as about its client APIs, OpenGL / OpenGLES 1.x / OpenGLES 2.x / OpenVG.
> >
> > Signed-off-by: Carlos Rafael Giani <dv at pseudoterminal.org>
> > ---
> >   meta/recipes-graphics/eglinfo/eglinfo-fb_1.0.bb  | 11 ++++++
> >   meta/recipes-graphics/eglinfo/eglinfo-x11_1.0.bb |  6 +++
> >   meta/recipes-graphics/eglinfo/eglinfo.inc        | 49 ++++++++++++++++++++++++
> >   3 files changed, 66 insertions(+)
> >   create mode 100644 meta/recipes-graphics/eglinfo/eglinfo-fb_1.0.bb
> >   create mode 100644 meta/recipes-graphics/eglinfo/eglinfo-x11_1.0.bb
> >   create mode 100644 meta/recipes-graphics/eglinfo/eglinfo.inc
> >
> > diff --git a/meta/recipes-graphics/eglinfo/eglinfo-fb_1.0.bb b/meta/recipes-graphics/eglinfo/eglinfo-fb_1.0.bb
> > new file mode 100644
> > index 0000000..65b265f
> > --- /dev/null
> > +++ b/meta/recipes-graphics/eglinfo/eglinfo-fb_1.0.bb
> > @@ -0,0 +1,11 @@
> > +EGLINFO_PLATFORM ?= "fb"
> > +EGLINFO_BINARY_NAME ?= "eglinfo-fb"
> > +
> > +# .bbappend files in BSP meta layers can add EGLINFO_DEVICE
> > +# values if necessary. eglinfo.inc contains default values for
> > +# the currently supported devices.
> > +# Consult the eglinfo README.md for details
> > +
> > +include eglinfo.inc
> > +
> > +SUMMARY += "(Framebuffer version)"
> > diff --git a/meta/recipes-graphics/eglinfo/eglinfo-x11_1.0.bb b/meta/recipes-graphics/eglinfo/eglinfo-x11_1.0.bb
> > new file mode 100644
> > index 0000000..8793a25
> > --- /dev/null
> > +++ b/meta/recipes-graphics/eglinfo/eglinfo-x11_1.0.bb
> > @@ -0,0 +1,6 @@
> > +EGLINFO_PLATFORM ?= "x11"
> > +EGLINFO_BINARY_NAME ?= "eglinfo-x11"
> > +
> > +include eglinfo.inc
> > +
> > +SUMMARY += "(X11 version)"
> > diff --git a/meta/recipes-graphics/eglinfo/eglinfo.inc b/meta/recipes-graphics/eglinfo/eglinfo.inc
> > new file mode 100644
> > index 0000000..116435d
> > --- /dev/null
> > +++ b/meta/recipes-graphics/eglinfo/eglinfo.inc
> > @@ -0,0 +1,49 @@
> > +SUMMARY = "Utility for printing information EGL and its client APIs (OpenGL, OpenGL ES, OpenVG)"
> > +SECTION = "graphics"
> > +LICENSE = "Zlib"
> > +HOMEPAGE = "https://github.com/dv1/eglinfo"
> > +LIC_FILES_CHKSUM = "file://LICENSE;md5=8d4f33bc3add976f7dfae85dab66f03c"
> > +
> > +DEPENDS = "virtual/egl"
> > +
> > +SRC_URI = "git://github.com/dv1/eglinfo.git;branch=master"
> > +SRCREV = "4a49ff59545d9b6a8222badab64115f89d3a6774"
> > +
> > +S = "${WORKDIR}/git"
> > +
> > +
> > +# BSP layers should add .bbappend files for the -x11 and -fb .bb recipes,
> > +# which append the respective EGL/OpenGLES/OpenVG libraries to DEPENDS
> > +# not doing that here, since some platforms might not have OpenGL ES or OpenVG support
> > +# (in that case, the eglinfo build scripts automatically disable the relevant code paths)
> > +
> > +EGLINFO_DEVICE ?= "generic"
> > +EGLINFO_DEVICE_raspberrypi ?= "raspberrypi"
> > +EGLINFO_DEVICE_beagleboard ?= "beagleboard"
> > +EGLINFO_DEVICE_mx6 ?= "imx6"
> > +
> > +
> > +do_clean() {
> > +	if [ -x ${S}/waf ]; then
> > +		${S}/waf distclean
> > +	fi
> > +}
> > +
> > +do_configure() {
> > +	${S}/waf configure \
> > +		--platform=${EGLINFO_PLATFORM} \
> > +		--device=${EGLINFO_DEVICE} \
> > +		--sysroot ${STAGING_DIR_TARGET} \
> > +		--prefix=${prefix} \
> > +		${EXTRA_OECONF}
> > +}
> > +
> > +do_compile() {
> > +	${S}/waf
> > +}
> > +
> > +do_install() {
> > +	mkdir -p "${D}/${bindir}"
> > +	mv "${S}/build/release/eglinfo" "${D}/${bindir}/${EGLINFO_BINARY_NAME}"
> > +}
> > +
> >
> 
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20130828/6fe60044/attachment-0002.sig>