[OE-core] [PATCH v3 4/6] gcc: enable multilib for target gcc
Constantin Musca
constantinx.musca at intel.com
Tue Jan 15 15:08:46 UTC 2013
- add a task to setup multilib configuration for target gcc
- this commit adapts Nitin Kamble's work to gcc 4.7
- gcc_multilib_setup creates the same patch for all gcc variants
- use a hash for storing the multilib default options
- use a hash for storing arch-dependent multilib options
Tests:
root at qemux86-64:~# gcc -m64 t.c -o t
root at qemux86-64:~# file t
t: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped
root at qemux86-64:~# ./t
Hello World !
root at qemux86-64:~# gcc -m32 t.c -o t
root at qemux86-64:~# file t
t: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped
root at qemux86-64:~# ./t
Hello World !
[YOCTO #1369]
Signed-off-by: Constantin Musca <constantinx.musca at intel.com>
---
meta/recipes-devtools/gcc/gcc-4.7.inc | 2 +-
meta/recipes-devtools/gcc/gcc-common.inc | 25 +++
meta/recipes-devtools/gcc/gcc-configure-common.inc | 3 +-
meta/recipes-devtools/gcc/gcc-configure-target.inc | 1 +
meta/recipes-devtools/gcc/gcc-multilib-config.inc | 198 +++++++++++++++++++++
meta/recipes-devtools/gcc/libgcc_4.7.bb | 44 +++++
6 files changed, 271 insertions(+), 2 deletions(-)
create mode 100644 meta/recipes-devtools/gcc/gcc-multilib-config.inc
diff --git a/meta/recipes-devtools/gcc/gcc-4.7.inc b/meta/recipes-devtools/gcc/gcc-4.7.inc
index 2fad764..13a1e7e 100644
--- a/meta/recipes-devtools/gcc/gcc-4.7.inc
+++ b/meta/recipes-devtools/gcc/gcc-4.7.inc
@@ -1,6 +1,6 @@
require gcc-common.inc
-PR = "r14"
+PR = "r15"
# Third digit in PV should be incremented after a minor release
# happens from this branch on gcc e.g. currently its 4.7.1
diff --git a/meta/recipes-devtools/gcc/gcc-common.inc b/meta/recipes-devtools/gcc/gcc-common.inc
index 6e64441..8c8168f 100644
--- a/meta/recipes-devtools/gcc/gcc-common.inc
+++ b/meta/recipes-devtools/gcc/gcc-common.inc
@@ -34,6 +34,29 @@ def get_gcc_multiarch_setting(bb, d):
return multiarch_options[target_arch]
return ""
+# this is used by the multilib setup of gcc
+def get_tune_parameters(tune, d):
+ availtunes = d.getVar('AVAILTUNES', True)
+ if tune not in availtunes.split():
+ bb.error('The tune: %s is not one of the available tunes: %s', tune, availtunes)
+
+ localdata = bb.data.createCopy(d)
+ override = ':tune-' + tune
+ localdata.setVar('OVERRIDES', localdata.getVar('OVERRIDES', False) + override)
+ bb.data.update_data(localdata)
+
+ retdict = {}
+ retdict['tune'] = tune
+ retdict['ccargs'] = localdata.getVar('TUNE_CCARGS', True)
+ retdict['features'] = localdata.getVar('TUNE_FEATURES', True)
+ retdict['baselib'] = localdata.getVar('BASE_LIB', True)
+ retdict['arch'] = localdata.getVar('TUNE_ARCH', True)
+ retdict['abiextension'] = localdata.getVar('ABIEXTENSION', True)
+ retdict['target_fpu'] = localdata.getVar('TARGET_FPU', True)
+ retdict['pkgarch'] = localdata.getVar('TUNE_PKGARCH', True)
+ retdict['package_extra_archs'] = localdata.getVar('PACKAGE_EXTRA_ARCHS', True)
+ return retdict
+
# We really need HOST_SYS here for some packages and TARGET_SYS for others.
# For now, libgcc is most important so we fix for that - RP.
SHLIBSDIR = "${STAGING_DIR_TARGET}/shlibs"
@@ -62,10 +85,12 @@ SS = "${TMPDIR}/stamps/work-shared/gcc-${PV}-${PR}"
do_fetch[stamp-base] = "${SS}"
do_unpack[stamp-base] = "${SS}"
do_patch[stamp-base] = "${SS}"
+do_gcc_multilib_setup[stamp-base] = "${SS}"
SSCLEAN = "${TMPDIR}/stamps/work-shared/gcc-[0-9]*-*"
do_fetch[stamp-base-clean] = "${SSCLEAN}"
do_unpack[stamp-base-clean] = "${SSCLEAN}"
do_patch[stamp-base-clean] = "${SSCLEAN}"
+do_gcc_multilib_setup[stamp-base-clean] = "${SSCLEAN}"
# SW means Shared Work directory
SW = "${TMPDIR}/work-shared/gcc-${PV}-${PR}"
diff --git a/meta/recipes-devtools/gcc/gcc-configure-common.inc b/meta/recipes-devtools/gcc/gcc-configure-common.inc
index 4eb59fd..b87ea62 100644
--- a/meta/recipes-devtools/gcc/gcc-configure-common.inc
+++ b/meta/recipes-devtools/gcc/gcc-configure-common.inc
@@ -1,3 +1,4 @@
+require gcc-multilib-config.inc
#
# Build the list of lanaguages to build.
#
@@ -25,7 +26,7 @@ EXTRA_OECONF_PATHS ?= ""
EXTRA_OECONF_INITIAL ?= ""
EXTRA_OECONF_INTERMEDIATE ?= ""
-GCCMULTILIB = "--disable-multilib"
+GCCMULTILIB ?= "--disable-multilib"
GCCTHREADS ?= "posix"
EXTRA_OECONF = "${@['--enable-clocale=generic', ''][d.getVar('USE_NLS', True) != 'no']} \
diff --git a/meta/recipes-devtools/gcc/gcc-configure-target.inc b/meta/recipes-devtools/gcc/gcc-configure-target.inc
index f41301f..6cc374b 100644
--- a/meta/recipes-devtools/gcc/gcc-configure-target.inc
+++ b/meta/recipes-devtools/gcc/gcc-configure-target.inc
@@ -1,3 +1,4 @@
+GCCMULTILIB = "--enable-multilib"
require gcc-configure-common.inc
EXTRA_OECONF_PATHS = " \
diff --git a/meta/recipes-devtools/gcc/gcc-multilib-config.inc b/meta/recipes-devtools/gcc/gcc-multilib-config.inc
new file mode 100644
index 0000000..b9d09ad
--- /dev/null
+++ b/meta/recipes-devtools/gcc/gcc-multilib-config.inc
@@ -0,0 +1,198 @@
+addtask gcc_multilib_setup after do_patch before do_configure
+
+# following code modifies these definitions in the gcc config
+# MULTILIB_OPTIONS
+# MULTILIB_DIRNAMES
+# MULTILIB_OSDIRNAMES
+# GLIBC_DYNAMIC_LINKER32
+# GLIBC_DYNAMIC_LINKER64
+# GLIBC_DYNAMIC_LINKERX32
+# GLIBC_DYNAMIC_LINKERN32
+# For more information on use of these variables look at these files in the gcc source code
+# gcc/config/i386/t-linux64
+# gcc/config/mips/t-linux64
+# gcc/config/rs6000/t-linux64
+# gcc/config/i386/linux64.h
+# gcc/config/mips/linux64.h
+# gcc/config/rs6000/linux64.h
+
+python do_gcc_multilib_setup() {
+ import re
+
+ srcdir = d.getVar('S', True)
+
+ def write_config(files, options, dirnames, osdirnames):
+ for ml_conf_file in files:
+ with open(srcdir + '/' + ml_conf_file, 'r') as f:
+ filelines = f.readlines()
+ # recreate multilib configuration variables
+ substs = [
+ (r'^(\s*(MULTILIB_OPTIONS\s*=).*)$', r'\2 %s' % '/'.join(options)),
+ (r'^(\s*MULTILIB_OPTIONS\s*\+=.*)$', ''),
+ (r'^(\s*(MULTILIB_DIRNAMES\s*=).*)$', r'\2 %s' % ' '.join(dirnames)),
+ (r'^(\s*MULTILIB_DIRNAMES\s*\+=.*)$', ''),
+ (r'^(\s*(MULTILIB_OSDIRNAMES\s*=).*)$', r'\2 %s' % ' '.join(osdirnames)),
+ (r'^(\s*MULTILIB_OSDIRNAMES\s*\+=.*)$', ''),
+ ]
+
+ for (i, line) in enumerate(filelines):
+ for subst in substs:
+ line = re.sub(subst[0], subst[1], line)
+ filelines[i] = line
+
+ with open(srcdir + '/' + ml_conf_file, 'w') as f:
+ f.write(''.join(filelines))
+
+ def write_headers(files, libdir32, libdir64, libdirx32, libdirn32):
+ def wrap_libdir(libdir):
+ if libdir.find('SYSTEMLIBS_DIR') != -1:
+ return libdir
+ else:
+ return '"/%s/"' % libdir
+
+ for ml_conf_file in files:
+ with open(srcdir + '/' + ml_conf_file, 'r') as f:
+ filelines = f.readlines()
+
+ # replace lines like
+ # #define GLIBC_DYNAMIC_LINKER32 SYSTEMLIBS_DIR "ld-linux.so.2"
+ # by
+ # #define GLIBC_DYNAMIC_LINKER32 "/lib/" "ld-linux.so.2"
+ # this is needed to put the correct dynamic loader path in the generated binaries
+ substs = [
+ (r'^(#define\s*GLIBC_DYNAMIC_LINKER32\s*)(\S+)(\s*\".*\")$',
+ r'\1' + wrap_libdir(libdir32) + r'\3'),
+ (r'^(#define\s*GLIBC_DYNAMIC_LINKER64\s*)(\S+)(\s*\".*\")$',
+ r'\1' + wrap_libdir(libdir64) + r'\3'),
+ (r'^(#define\s*GLIBC_DYNAMIC_LINKERX32\s*)(\S+)(\s*\".*\")$',
+ r'\1' + wrap_libdir(libdirx32) + r'\3'),
+ (r'^(#define\s*GLIBC_DYNAMIC_LINKERN32\s*)(\S+)(\s*\".*\")$',
+ r'\1' + wrap_libdir(libdirn32) + r'\3'),
+ ]
+
+ for (i, line) in enumerate(filelines):
+ for subst in substs:
+ line = re.sub(subst[0], subst[1], line)
+ filelines[i] = line
+
+ with open(srcdir + '/' + ml_conf_file, 'w') as f:
+ f.write(''.join(filelines))
+
+ gcc_target_config_files = {
+ 'x86_64' : ['gcc/config/i386/t-linux64'],
+ 'i586' : ['gcc/config/i386/t-linux64'],
+ 'mips' : ['gcc/config/mips/t-linux64'],
+ 'powerpc' : ['gcc/config/rs6000/t-linux64'],
+ }
+
+ gcc_header_config_files = {
+ 'x86_64' : ['gcc/config/i386/linux64.h'],
+ 'i586' : ['gcc/config/i386/linux64.h'],
+ 'mips' : ['gcc/config/mips/linux64.h'],
+ 'powerpc' : ['gcc/config/rs6000/linux64.h'],
+ }
+
+ default_ml_config = {
+ 'gcc/config/i386/t-linux64' : {
+ 'options' : ['$(subst $(comma),/,$(TM_MULTILIB_CONFIG))'],
+ 'dirnames' : ['.'] * 2,
+ 'osdirnames' : ['../$(shell basename $(base_libdir))'] * 2,
+ },
+ 'gcc/config/mips/t-linux64' : {
+ 'options' : ['mabi=n32', 'mabi=32', 'mabi=64'],
+ 'dirnames' : ['.'] * 3,
+ 'osdirnames' : ['../$(shell basename $(base_libdir))'] * 3,
+ },
+ 'gcc/config/rs6000/t-linux64' : {
+ 'options' : ['m64/m32 msoft-float'],
+ 'dirnames' : ['.'] * 3,
+ 'osdirnames' : ['../$(shell basename $(base_libdir))'] * 3,
+ },
+ }
+
+ multilibs = (d.getVar('MULTILIB_VARIANTS', True) or "").split()
+ default_ml = False if multilibs else True
+
+ mlvariant = False
+ mlindex = 0
+ pn = d.getVar('PN', True)
+ for ml in multilibs:
+ if pn.startswith(ml):
+ mlvariant = True
+ break
+ mlindex += 1
+
+ target_arch = (d.getVar('TARGET_ARCH_MULTILIB_ORIGINAL', True) if mlvariant
+ else d.getVar('TARGET_ARCH', True))
+
+ if target_arch not in gcc_target_config_files:
+ if multilibs:
+ bb.warn('gcc multilib setup is not supported for TARGET_ARCH=' + target_arch)
+ default_ml = True
+
+ libdir32 = 'SYSTEMLIBS_DIR'
+ libdir64 = 'SYSTEMLIBS_DIR'
+ libdirx32 = 'SYSTEMLIBS_DIR'
+ libdirn32 = 'SYSTEMLIBS_DIR'
+
+ if default_ml:
+ for fn in default_ml_config:
+ write_config([fn],
+ default_ml_config[fn]['options'],
+ default_ml_config[fn]['dirnames'],
+ default_ml_config[fn]['osdirnames'])
+
+ write_headers([item for sublist in gcc_header_config_files.values()
+ for item in sublist],
+ libdir32, libdir64, libdirx32, libdirn32)
+ return
+
+ target_config_files = gcc_target_config_files[target_arch]
+ header_config_files = gcc_header_config_files[target_arch]
+ ml_list = ['DEFAULTTUNE_MULTILIB_ORIGINAL' if mlvariant else 'DEFAULTTUNE']
+
+ mltunes = ['DEFAULTTUNE_virtclass-multilib-%s' % ml for ml in multilibs]
+ if multilibs:
+ if mlvariant:
+ ml_list.extend(mltunes[:mlindex] + ['DEFAULTTUNE'] + mltunes[(mlindex + 1):])
+ else:
+ ml_list.extend(mltunes)
+
+ options = []
+ dirnames = []
+ osdirnames = []
+
+ for ml in ml_list:
+ tune = d.getVar(ml, True)
+ if not tune:
+ bb.warn("%s doesn't have a corresponding tune. Skipping..." % ml)
+ continue
+ tune_parameters = get_tune_parameters(tune, d)
+
+ tune_baselib = tune_parameters['baselib']
+ if not tune_baselib:
+ bb.warn("Tune %s doesn't have a baselib set. Skipping..." % tune)
+ continue
+
+ if tune_baselib == 'lib64':
+ libdir64 = tune_baselib
+ elif tune_baselib == 'libx32':
+ libdirx32 = tune_baselib
+ elif tune_baselib == 'lib32':
+ libdirn32 = tune_baselib
+ elif tune_baselib == 'lib':
+ libdir32 = tune_baselib
+ else:
+ bb.error('Unknown libdir (%s) of the tune : %s' % (tune_baselib, tune))
+
+ # take out '-' in parameters
+ options.append(re.sub(r' +\-+', ' ', re.sub(r'^ *\-+', '', tune_parameters['ccargs'])))
+ if tune_baselib == 'lib':
+ dirnames.append('32') # /lib => 32bit lib
+ else:
+ dirnames.append(tune_baselib.replace('lib', ''))
+ osdirnames.append('../' + tune_baselib)
+
+ write_config(target_config_files, options, dirnames, osdirnames)
+ write_headers(header_config_files, libdir32, libdir64, libdirx32, libdirn32)
+}
diff --git a/meta/recipes-devtools/gcc/libgcc_4.7.bb b/meta/recipes-devtools/gcc/libgcc_4.7.bb
index 5eaa515..c17c78a 100644
--- a/meta/recipes-devtools/gcc/libgcc_4.7.bb
+++ b/meta/recipes-devtools/gcc/libgcc_4.7.bb
@@ -15,6 +15,10 @@ FILES_${PN} = "${base_libdir}/libgcc*.so.*"
FILES_${PN}-dev = " \
${base_libdir}/libgcc*.so \
${libdir}/${TARGET_SYS}/${BINV}/*crt* \
+ ${libdir}/${TARGET_SYS}/${BINV}/64 \
+ ${libdir}/${TARGET_SYS}/${BINV}/32 \
+ ${libdir}/${TARGET_SYS}/${BINV}/x32 \
+ ${libdir}/${TARGET_SYS}/${BINV}/n32 \
${libdir}/${TARGET_SYS}/${BINV}/libgcc*"
FILES_libgcov-dev = " \
${libdir}/${TARGET_SYS}/${BINV}/libgcov.a \
@@ -70,3 +74,43 @@ BBCLASSEXTEND = "nativesdk"
INSANE_SKIP_${PN}-dev = "staticdev"
INSANE_SKIP_${MLPREFIX}libgcov-dev = "staticdev"
+
+addtask multilib_install after do_install before do_package
+# this makes multilib gcc files findable for target gcc
+# e.g.
+# /usr/lib/i586-pokymllib32-linux/4.7/
+# by creating this symlink to it
+# /usr/lib64/x86_64-poky-linux/4.7/32
+
+python do_multilib_install() {
+ import re
+ # do this only for multilib extended recipe
+ if d.getVar('PN', True) != 'libgcc':
+ return
+
+ multilibs = d.getVar('MULTILIB_VARIANTS', True) or ''
+ if multilibs == '':
+ return
+
+ binv = d.getVar('BINV', True) or ''
+
+ for ml in multilibs.split(' '):
+ tune = d.getVar('DEFAULTTUNE_virtclass-multilib-' + ml, True) or ''
+ tune_parameters = get_tune_parameters(tune, d)
+ tune_baselib = tune_parameters['baselib']
+ tune_arch = tune_parameters['arch']
+ tune_bitness = tune_baselib.replace('lib', '')
+ if tune_bitness == '' :
+ tune_bitness = '32' # /lib => 32bit lib
+
+ src = '../../../' + tune_baselib + '/' + \
+ tune_arch + d.getVar('TARGET_VENDOR', True) + 'ml' + ml + \
+ '-' + d.getVar('TARGET_OS', True) + '/' + binv + '/'
+
+ dest = d.getVar('D', True) + d.getVar('libdir', True) + '/' + \
+ d.getVar('TARGET_SYS', True) + '/' + binv + '/' + tune_bitness
+
+ if os.path.lexists(dest):
+ os.unlink(dest)
+ os.symlink(src, dest)
+}
--
1.7.11.7
More information about the Openembedded-core
mailing list