[OE-core] [PATCH] wpa-supplicant: enable required configuration options for connman
Iorga, Cristian
cristian.iorga at intel.com
Thu Jul 25 06:22:10 UTC 2013
ACK.
-----Original Message-----
From: openembedded-core-bounces at lists.openembedded.org [mailto:openembedded-core-bounces at lists.openembedded.org] On Behalf Of Simon Busch
Sent: Thursday, July 25, 2013 1:29 AM
To: openembedded-core at lists.openembedded.org
Subject: [OE-core] [PATCH] wpa-supplicant: enable required configuration options for connman
Details can be found in the connman documentation:
https://git.kernel.org/cgit/network/connman/connman.git/tree/README#n280
Signed-off-by: Simon Busch <morphis at gravedo.de>
---
.../wpa-supplicant/wpa-supplicant/defconfig-gnutls | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls
index e041b4d..8be4107 100644
--- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-
+++ gnutls
@@ -190,7 +190,7 @@ CONFIG_EAP_LEAP=y
#CONFIG_EAP_TNC=y
# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
+CONFIG_WPS=y
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
@@ -407,3 +407,22 @@ CONFIG_TLS = gnutls #CONFIG_GNUTLS_EXTRA=y CONFIG_CTRL_IFACE_DBUS=y CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# AP mode operations with wpa_supplicant # This can be used for
+controlling AP mode operations with wpa_supplicant. It # should be
+noted that this is mainly aimed at simple cases like # WPA2-Personal
+while more complex configurations like WPA2-Enterprise with an #
+external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+CONFIG_BGSCAN_SIMPLE=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
--
1.8.1.2
_______________________________________________
Openembedded-core mailing list
Openembedded-core at lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
More information about the Openembedded-core
mailing list