[OE-core] [PATCH] alsa-tools: Update autotools.patch

[Saul Wold]

On 03/13/2013 06:43 PM, Nobuhiro Iwamatsu wrote:
> Hi,
>
> When I build alsa-tools, I could not build this with following error:
> ----
> checking for i586-oe-linux-pkg-config... no
> checking for pkg-config...
> /home/iwamatsu/yocto/alsa/tmp-eglibc/sysroots/x86_64-linux/usr/bin/pkg-config
> configure: WARNING: using cross tools not prefixed with host triplet
> checking pkg-config is at least version 0.9.0... yes
> checking for ENVY24CONTROL... no
> configure: error: Package requirements (gtk+-2.0 alsa >= 0.9.0) were not met:
>
> No package 'gtk+-2.0' found
>
What kind of image/packages are you building, it's possible that your 
image does not have gtk+ included and it looks like alsa-tools should 
depend on gtk+.

It might be better to add a PACKAGECONFIG with gtk+ for these instead of 
just removing them.

You can see python-smartpm_1.4.1.bb as example of how it's done.

Sau!


> Consider adjusting the PKG_CONFIG_PATH environment variable if you
> installed software in a non-standard prefix.
>
> Alternatively, you may set the environment variables ENVY24CONTROL_CFLAGS
> and ENVY24CONTROL_LIBS to avoid the need to call pkg-config.
> See the pkg-config man page for more details.
> make: *** [all] Error 1
> ----
>
> The original patch is deleted from the list in the software depending on gtk.
> However, envy24control etc. are dependent on gtk.
> The patch which I created deletes these from a list.
> I checked with openembedded-core (375ed2eaef10dd7d8f46badca6d779708724e5f6).
>
> Does my environment have a problem?
>
> Best regards,
>    Nobuhiro
>
> On Wed, Mar 13, 2013 at 8:02 PM, Iorga, Cristian
> <cristian.iorga at intel.com> wrote:
>> Hello Nobuhiro-san,
>>
>> Can you please explain your patch?
>> As far as I know, the alsa-tools present as targets were all buildable.
>> This was verified by me at last update.
>>
>> Regards,
>> Cristian
>>
>> -----Original Message-----
>> From: Nobuhiro Iwamatsu [mailto:iwamatsu at nigauri.org] On Behalf Of Nobuhiro Iwamatsu
>> Sent: Wednesday, March 13, 2013 4:09 AM
>> To: openembedded-core at lists.openembedded.org
>> Cc: Iorga, Cristian; Nobuhiro Iwamatsu
>> Subject: [PATCH] alsa-tools: Update autotools.patch
>>
>> envy24control, rmedigicontrol and echomixer require gtk+-2.0.
>> Remove envy24control rmedigicontrol and echomixer from list of tools.
>>
>> CC: Cristian Iorga <cristian.iorga at intel.com>
>> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
>> ---
>>   .../alsa/alsa-tools/autotools.patch                |    6 +++---
>>   .../recipes-multimedia/alsa/alsa-tools_1.0.26.1.bb |    2 +-
>>   2 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/meta/recipes-multimedia/alsa/alsa-tools/autotools.patch b/meta/recipes-multimedia/alsa/alsa-tools/autotools.patch
>> index 294e970..08dd9de 100644
>> --- a/meta/recipes-multimedia/alsa/alsa-tools/autotools.patch
>> +++ b/meta/recipes-multimedia/alsa/alsa-tools/autotools.patch
>> @@ -26,9 +26,9 @@ diff -ruN alsa-tools-1.0.24.1-orig//Makefile alsa-tools-1.0.24.1/Makefile
>>   -        mixartloader pcxhrloader rmedigicontrol sb16_csp seq sscape_ctl \
>>   -        us428control usx2yloader vxloader echomixer ld10k1 qlo10k1 \
>>   -        hwmixvolume hdajackretask hda-verb
>> -+SUBDIRS = ac3dec as10k1 envy24control \
>> -+        mixartloader pcxhrloader rmedigicontrol sb16_csp seq sscape_ctl \
>> -+        us428control usx2yloader vxloader echomixer \
>> ++SUBDIRS = ac3dec as10k1 \
>> ++        mixartloader pcxhrloader sb16_csp seq sscape_ctl \
>> ++        us428control usx2yloader vxloader \
>>   +        hwmixvolume hda-verb
>>
>>    all:
>> diff --git a/meta/recipes-multimedia/alsa/alsa-tools_1.0.26.1.bb b/meta/recipes-multimedia/alsa/alsa-tools_1.0.26.1.bb
>> index 0fe4bee..4b4f29b 100644
>> --- a/meta/recipes-multimedia/alsa/alsa-tools_1.0.26.1.bb
>> +++ b/meta/recipes-multimedia/alsa/alsa-tools_1.0.26.1.bb
>> @@ -5,7 +5,7 @@ SECTION = "console/utils"
>>   LICENSE = "GPLv2 & LGPLv2+"
>>   DEPENDS = "alsa-lib ncurses"
>>
>> -PR = "r0"
>> +PR = "r1"
>>
>>   LIC_FILES_CHKSUM = "file://hdsploader/COPYING;md5=94d55d512a9ba36caa9b7df079bae19f \
>>                       file://ld10k1/COPYING.LIB;md5=7fbc338309ac38fefcd64b04bb903e34"
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
>
>