[OE-core] [v2 PATCH 1/2] grub-efi-native: fix build failure on 32bit host
Saul Wold
sgw at linux.intel.com
Wed Nov 13 22:06:29 UTC 2013
On 11/08/2013 11:56 PM, jackie.huang at windriver.com wrote:
> From: Jackie Huang <jackie.huang at windriver.com>
>
> grub-efi-native builds grub with efi platform, then run
> "grub-mkimage" command with built in cfg and modules to
> generate an EFI binary for the target, and deploys it.
>
> It works fine when build on 64bit host, but when we build
> x86-64 target on 32bit host, it fails to build 64bit grub,
> even if it builds, the 64bit binary "grub-mkimage" would
> fail to run to generate EFI.
>
> So the solution is:
> Add a target package grub-efi and grub-efi-native depends
> on it, grub-efi-native will be back to real native, then
> run "grub-mkimage" command with modules in sysroot populated
> by grub-efi to generate the EFI binary for target.
>
> Signed-off-by: Jackie Huang <jackie.huang at windriver.com>
> ---
> meta/recipes-bsp/grub/grub-efi-native_2.00.bb | 54 ++++++---------------------
> meta/recipes-bsp/grub/grub-efi.inc | 42 +++++++++++++++++++++
> meta/recipes-bsp/grub/grub-efi_2.00.bb | 11 ++++++
> 3 files changed, 64 insertions(+), 43 deletions(-)
> create mode 100644 meta/recipes-bsp/grub/grub-efi.inc
> create mode 100644 meta/recipes-bsp/grub/grub-efi_2.00.bb
>
> diff --git a/meta/recipes-bsp/grub/grub-efi-native_2.00.bb b/meta/recipes-bsp/grub/grub-efi-native_2.00.bb
> index 04973b5..b64fc3c 100644
> --- a/meta/recipes-bsp/grub/grub-efi-native_2.00.bb
> +++ b/meta/recipes-bsp/grub/grub-efi-native_2.00.bb
> @@ -1,47 +1,20 @@
> -SUMMARY = "GRUB2 is the next-generation GRand Unified Bootloader"
> +require grub-efi.inc
>
> -DESCRIPTION = "GRUB2 is the next generaion of a GPLed bootloader \
> -intended to unify bootloading across x86 operating systems. In \
> -addition to loading the Linux kernel, it implements the Multiboot \
> -standard, which allows for flexible loading of multiple boot images. \
> -This recipe builds an EFI binary for the target. It does not install \
> -or package anything, it only deploys a target-arch GRUB EFI image."
> +# do_mkimage needs grub modules for the target to generate the correct
> +# EFI binary, so depends on the target package 'grub-efi' to compile
> +# the necessary modules.
> +DEPENDS += "grub-efi"
>
> -HOMEPAGE = "http://www.gnu.org/software/grub/"
> -SECTION = "bootloaders"
> -
> -LICENSE = "GPLv3"
> -LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
> -
> -# FIXME: We should be able to optionally drop freetype as a dependency
> -DEPENDS = "autogen-native"
> -RDEPENDS_${PN} = "diffutils freetype"
> -PR = "r2"
> +PR = "${INC_PR}.0"
>
Don't need the INC_PR
> # Native packages do not normally rebuild when the target changes.
> # Ensure this is built once per HOST-TARGET pair.
> PN := "grub-efi-${TRANSLATED_TARGET_ARCH}-native"
>
> -SRC_URI = "ftp://ftp.gnu.org/gnu/grub/grub-${PV}.tar.gz \
> - file://cfg \
> - file://grub-2.00-fpmath-sse-387-fix.patch \
> - file://grub-2.00-fix-enable_execute_stack-check.patch \
> - file://grub-2.00-disable-help2man.patch \
> - file://check-if-liblzma-is-disabled.patch \
> - file://grub-no-unused-result.patch \
> - file://grub-2.00-ignore-gnulib-gets-stupidity.patch \
> - file://fix-issue-with-flex-2.5.37.patch \
> - "
> -SRC_URI[md5sum] = "e927540b6eda8b024fb0391eeaa4091c"
> -SRC_URI[sha256sum] = "65b39a0558f8c802209c574f4d02ca263a804e8a564bc6caf1cd0fd3b3cc11e3"
> -
> -COMPATIBLE_HOST = '(x86_64.*|i.86.*)-(linux|freebsd.*)'
> -
> -S = "${WORKDIR}/grub-${PV}"
> -
> # Determine the target arch for the grub modules before the native class
> -# clobbers TARGET_ARCH.
> +# clobbers TARGET_ARCH and STAGING_LIBDIR.
> ORIG_TARGET_ARCH := "${TARGET_ARCH}"
> +ORIG_STAGING_LIBDIR := "${STAGING_LIBDIR}"
> python __anonymous () {
> import re
> target = d.getVar('ORIG_TARGET_ARCH', True)
> @@ -57,19 +30,14 @@ python __anonymous () {
> d.setVar("GRUB_IMAGE", grubimage)
> }
>
> -inherit autotools
> -inherit gettext
> inherit native
> inherit deploy
>
> -EXTRA_OECONF = "--with-platform=efi --disable-grub-mkfont \
> - --target=${GRUB_TARGET} --enable-efiemu=no --program-prefix='' \
> - --enable-liblzma=no --enable-device-mapper=no --enable-libzfs=no"
> -
> do_mkimage() {
> # Search for the grub.cfg on the local boot media by using the
> - # built in cfg file provided via this recipe
> - ./grub-mkimage -c ../cfg -p /EFI/BOOT -d ./grub-core/ \
> + # built in cfg file provided via this recipe and modules dir
> + # populated by grub-efi
> + ./grub-mkimage -c ../cfg -p /EFI/BOOT -d ${ORIG_STAGING_LIBDIR}/grub-efi/${GRUB_TARGET}-efi \
> -O ${GRUB_TARGET}-efi -o ./${GRUB_IMAGE} \
> boot linux ext2 fat serial part_msdos part_gpt normal efi_gop iso9660 search
> }
> diff --git a/meta/recipes-bsp/grub/grub-efi.inc b/meta/recipes-bsp/grub/grub-efi.inc
> new file mode 100644
> index 0000000..1c64646
> --- /dev/null
> +++ b/meta/recipes-bsp/grub/grub-efi.inc
> @@ -0,0 +1,42 @@
> +SUMMARY = "GRUB2 is the next-generation GRand Unified Bootloader"
> +
> +DESCRIPTION = "GRUB2 is the next generaion of a GPLed bootloader \
> +intended to unify bootloading across x86 operating systems. In \
> +addition to loading the Linux kernel, it implements the Multiboot \
> +standard, which allows for flexible loading of multiple boot images. \
> +This recipe builds an EFI binary for the target. It does not install \
> +or package anything, it only deploys a target-arch GRUB EFI image."
> +
> +HOMEPAGE = "http://www.gnu.org/software/grub/"
> +SECTION = "bootloaders"
> +
> +LICENSE = "GPLv3"
> +LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
> +
> +# FIXME: We should be able to optionally drop freetype as a dependency
> +DEPENDS = "autogen-native flex-native"
> +INC_PR = "r2"
> +
Should just be PR = "r2" and shared by both.
> +SRC_URI = "ftp://ftp.gnu.org/gnu/grub/grub-${PV}.tar.gz \
> + file://cfg \
> + file://grub-2.00-fpmath-sse-387-fix.patch \
> + file://grub-2.00-fix-enable_execute_stack-check.patch \
> + file://grub-2.00-disable-help2man.patch \
> + file://check-if-liblzma-is-disabled.patch \
> + file://grub-no-unused-result.patch \
> + file://grub-2.00-ignore-gnulib-gets-stupidity.patch \
> + file://fix-issue-with-flex-2.5.37.patch \
> + "
> +SRC_URI[md5sum] = "e927540b6eda8b024fb0391eeaa4091c"
> +SRC_URI[sha256sum] = "65b39a0558f8c802209c574f4d02ca263a804e8a564bc6caf1cd0fd3b3cc11e3"
> +
> +COMPATIBLE_HOST = '(x86_64.*|i.86.*)-(linux|freebsd.*)'
> +
> +S = "${WORKDIR}/grub-${PV}"
> +
> +inherit autotools
> +inherit gettext
> +
> +EXTRA_OECONF = "--with-platform=efi --disable-grub-mkfont \
> + --enable-efiemu=no --program-prefix='' \
> + --enable-liblzma=no --enable-device-mapper=no --enable-libzfs=no"
> diff --git a/meta/recipes-bsp/grub/grub-efi_2.00.bb b/meta/recipes-bsp/grub/grub-efi_2.00.bb
> new file mode 100644
> index 0000000..9be1fd2
> --- /dev/null
> +++ b/meta/recipes-bsp/grub/grub-efi_2.00.bb
> @@ -0,0 +1,11 @@
> +require grub-efi.inc
> +
> +RDEPENDS_${PN} = "diffutils freetype"
> +
> +PR = "${INC_PR}.0"
I am not sure you need to extend PR here since we are working to get rid
of PR in general, just leave the PR="r2" in the new .inc file.
> +FILES_${PN}-dbg += "${libdir}/${BPN}/${TARGET_ARCH}-efi/.debug"
> +
I am not sure if this is doing the right thing, as I am getting QA
errors regarding where debug files are going, but this may need to be
GRUB-TARGET. This is just an example of one:
ERROR: QA Issue: non debug package contains .debug directory: grub-efi
path
/work/core2-poky-linux/grub-efi/2.00-r2.0/packages-split/grub-efi/usr/lib/grub-efi/i386-efi/.debug/part_bsd.module
ERROR: QA run found fatal errors. Please consider fixing them.
ERROR: Function failed: do_package_qa
> +do_install_append () {
> + mv ${D}${libdir}/grub ${D}${libdir}/${BPN}
> + mv ${D}${datadir}/grub ${D}${datadir}/${BPN}
> +}
>
More information about the Openembedded-core
mailing list