[OE-core] [PATCH][for-dora] udev: update local rules for new touchscreen device

[Chase Maupin]

* While working with a new capacitive touchscreen it was found
  that the existing udev rule that creates the
  /dev/input/touchscreen0 symlink was too restrictive and did not
  match the MODALAIS entry for this touchscreen. which is:

  MODALIAS=input:b0018v0000p0000e0000-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw

* By looking at the input_print_modalias function in the Linux
  kernel drivers/input/input.c file and referencing the meaning
  of the evbits and attributes of the input_dev structure it seems
  that for identification of a touchscreen the match with ,18
  which was matching part of the absbit structure is overkill.

* It seems that the absbit entry is used for devices like
  touchscreens and if that the the "a" is followed by 0 and 1 this
  is sufficient.

* So the logic has now been changed to check for the "e" 0 and 3
  values which correspond to EV_SYN and EV_ABS, then check for
  the "a" attribute with 0 and 1.

Signed-off-by: Chase Maupin <Chase.Maupin at ti.com>
---
 meta/recipes-core/udev/udev/local.rules |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/meta/recipes-core/udev/udev/local.rules b/meta/recipes-core/udev/udev/local.rules
index 72d92ef..d0cbf91 100644
--- a/meta/recipes-core/udev/udev/local.rules
+++ b/meta/recipes-core/udev/udev/local.rules
@@ -17,5 +17,7 @@
 ACTION=="add", DEVPATH=="/devices/*", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"
 
 # Create a symlink to any touchscreen input device
-SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
+# Trigger based on input type, that the evbit (-e) has EV_SYN and EV_ABS,
+# has an EV_ABS value (-a) which is used for touchscreen type devices.
+SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*", SYMLINK+="input/touchscreen0"
 
-- 
1.7.0.4