[OE-core] [PATCH 1/8] oeqa/controllers/masterimage: add a base class for hw targets
Paul Eggleton
paul.eggleton at linux.intel.com
Wed Apr 30 12:31:57 UTC 2014
From: Stefan Stanacar <stefanx.stanacar at intel.com>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
Signed-off-by: Stefan Stanacar <stefanx.stanacar at intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton at linux.intel.com>
---
meta/lib/oeqa/controllers/masterimage.py | 137 ++++++++++++++++++++-----------
1 file changed, 91 insertions(+), 46 deletions(-)
diff --git a/meta/lib/oeqa/controllers/masterimage.py b/meta/lib/oeqa/controllers/masterimage.py
index 188c630..1bd0ab4 100644
--- a/meta/lib/oeqa/controllers/masterimage.py
+++ b/meta/lib/oeqa/controllers/masterimage.py
@@ -1,17 +1,50 @@
+# Copyright (C) 2014 Intel Corporation
+#
+# Released under the MIT license (see COPYING.MIT)
+
+# This module adds support to testimage.bbclass to deploy images and run
+# tests using a "master image" - this is a "known good" image that is
+# installed onto the device as part of initial setup and will be booted into
+# with no interaction; we can then use it to deploy the image to be tested
+# to a second partition before running the tests.
+#
+# For an example master image, see core-image-testmaster
+# (meta/recipes-extended/images/core-image-testmaster.bb)
+
import os
import bb
import traceback
import time
+import subprocess
import oeqa.targetcontrol
import oeqa.utils.sshcontrol as sshcontrol
import oeqa.utils.commands as commands
-class GummibootTarget(oeqa.targetcontrol.SimpleRemoteTarget):
+from abc import ABCMeta, abstractmethod
+
+class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget):
+
+ __metaclass__ = ABCMeta
def __init__(self, d):
- # let our base class do the ip thing
- super(GummibootTarget, self).__init__(d)
+ super(MasterImageHardwareTarget, self).__init__(d)
+
+ # target ip
+ addr = d.getVar("TEST_TARGET_IP", True) or bb.fatal('Please set TEST_TARGET_IP with the IP address of the machine you want to run the tests on.')
+ self.ip = addr.split(":")[0]
+ try:
+ self.port = addr.split(":")[1]
+ except IndexError:
+ self.port = None
+ bb.note("Target IP: %s" % self.ip)
+ self.server_ip = d.getVar("TEST_SERVER_IP", True)
+ if not self.server_ip:
+ try:
+ self.server_ip = subprocess.check_output(['ip', 'route', 'get', self.ip ]).split("\n")[0].split()[-1]
+ except Exception as e:
+ bb.fatal("Failed to determine the host IP address (alternatively you can set TEST_SERVER_IP with the IP address of this machine): %s" % e)
+ bb.note("Server IP: %s" % self.server_ip)
# test rootfs + kernel
self.rootfs = os.path.join(d.getVar("DEPLOY_DIR_IMAGE", True), d.getVar("IMAGE_LINK_NAME", True) + '.tar.gz')
@@ -26,36 +59,11 @@ class GummibootTarget(oeqa.targetcontrol.SimpleRemoteTarget):
if not os.path.isfile(self.kernel):
bb.fatal("No kernel found. Expected path: %s" % self.kernel)
- # if the user knows what he's doing, then by all means...
- # test-rootfs.tar.gz and test-kernel are hardcoded names in other places
- # they really have to be used like that in commands though
- cmds = d.getVar("TEST_DEPLOY_CMDS", True)
-
- # this the value we need to set in the LoaderEntryOneShot EFI variable
- # so the system boots the 'test' bootloader label and not the default
- # The first four bytes are EFI bits, and the rest is an utf-16le string
- # (EFI vars values need to be utf-16)
- # $ echo -en "test\0" | iconv -f ascii -t utf-16le | hexdump -C
- # 00000000 74 00 65 00 73 00 74 00 00 00 |t.e.s.t...|
- self.efivarvalue = r'\x07\x00\x00\x00\x74\x00\x65\x00\x73\x00\x74\x00\x00\x00'
-
- if cmds:
- self.deploy_cmds = cmds.split("\n")
- else:
- self.deploy_cmds = [
- 'mount -L boot /boot',
- 'mkdir -p /mnt/testrootfs',
- 'mount -L testrootfs /mnt/testrootfs',
- 'modprobe efivarfs',
- 'mount -t efivarfs efivarfs /sys/firmware/efi/efivars',
- 'cp ~/test-kernel /boot',
- 'rm -rf /mnt/testrootfs/*',
- 'tar xzvf ~/test-rootfs.tar.gz -C /mnt/testrootfs',
- 'printf "%s" > /sys/firmware/efi/efivars/LoaderEntryOneShot-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f' % self.efivarvalue
- ]
-
# master ssh connection
self.master = None
+ # if the user knows what they are doing, then by all means...
+ self.user_cmds = d.getVar("TEST_DEPLOY_CMDS", True)
+ self.deploy_cmds = None
# this is the name of the command that controls the power for a board
# e.g: TEST_POWERCONTROL_CMD = "/home/user/myscripts/powercontrol.py ${MACHINE} what-ever-other-args-the-script-wants"
@@ -94,22 +102,67 @@ class GummibootTarget(oeqa.targetcontrol.SimpleRemoteTarget):
def deploy(self):
bb.plain("%s - deploying image on target" % self.pn)
# base class just sets the ssh log file for us
- super(GummibootTarget, self).deploy()
+ super(MasterImageHardwareTarget, self).deploy()
self.master = sshcontrol.SSHControl(ip=self.ip, logfile=self.sshlog, timeout=600, port=self.port)
+ status, output = self.master.run("cat /etc/masterimage")
+ if status != 0:
+ bb.fatal("No ssh connectivity or target isn't running a master image.\n%s" % output)
+ if self.user_cmds:
+ self.deploy_cmds = self.user_cmds.split("\n")
try:
self._deploy()
except Exception as e:
bb.fatal("Failed deploying test image: %s" % e)
+ @abstractmethod
def _deploy(self):
- # make sure we are in the right image
- status, output = self.master.run("cat /etc/masterimage")
- if status != 0:
- raise Exception("No ssh connectivity or target isn't running a master image.\n%s" % output)
+ pass
+
+ def start(self, params=None):
+ bb.plain("%s - boot test image on target" % self.pn)
+ self._start()
+ # set the ssh object for the target/test image
+ self.connection = sshcontrol.SSHControl(self.ip, logfile=self.sshlog, port=self.port)
+ bb.plain("%s - start running tests" % self.pn)
+
+ @abstractmethod
+ def _start(self):
+ pass
+ def stop(self):
+ bb.plain("%s - reboot/powercycle target" % self.pn)
+ self.power_cycle(self.connection)
+
+ def restart(self):
+ pass
+
+
+class GummibootTarget(MasterImageHardwareTarget):
+
+ def __init__(self, d):
+ super(GummibootTarget, self).__init__(d)
+ # this the value we need to set in the LoaderEntryOneShot EFI variable
+ # so the system boots the 'test' bootloader label and not the default
+ # The first four bytes are EFI bits, and the rest is an utf-16le string
+ # (EFI vars values need to be utf-16)
+ # $ echo -en "test\0" | iconv -f ascii -t utf-16le | hexdump -C
+ # 00000000 74 00 65 00 73 00 74 00 00 00 |t.e.s.t...|
+ self.efivarvalue = r'\x07\x00\x00\x00\x74\x00\x65\x00\x73\x00\x74\x00\x00\x00'
+ self.deploy_cmds = [
+ 'mount -L boot /boot',
+ 'mkdir -p /mnt/testrootfs',
+ 'mount -L testrootfs /mnt/testrootfs',
+ 'modprobe efivarfs',
+ 'mount -t efivarfs efivarfs /sys/firmware/efi/efivars',
+ 'cp ~/test-kernel /boot',
+ 'rm -rf /mnt/testrootfs/*',
+ 'tar xzvf ~/test-rootfs.tar.gz -C /mnt/testrootfs',
+ 'printf "%s" > /sys/firmware/efi/efivars/LoaderEntryOneShot-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f' % self.efivarvalue
+ ]
+
+ def _deploy(self):
# make sure these aren't mounted
self.master.run("umount /boot; umount /mnt/testrootfs; umount /sys/firmware/efi/efivars;")
-
# from now on, every deploy cmd should return 0
# else an exception will be thrown by sshcontrol
self.master.ignore_status = False
@@ -118,16 +171,8 @@ class GummibootTarget(oeqa.targetcontrol.SimpleRemoteTarget):
for cmd in self.deploy_cmds:
self.master.run(cmd)
-
- def start(self, params=None):
- bb.plain("%s - boot test image on target" % self.pn)
+ def _start(self, params=None):
self.power_cycle(self.master)
# there are better ways than a timeout but this should work for now
time.sleep(120)
- # set the ssh object for the target/test image
- self.connection = sshcontrol.SSHControl(self.ip, logfile=self.sshlog, port=self.port)
- bb.plain("%s - start running tests" % self.pn)
- def stop(self):
- bb.plain("%s - reboot/powercycle target" % self.pn)
- self.power_cycle(self.connection)
--
1.9.0
More information about the Openembedded-core
mailing list