[OE-core] [PATCH 05/24] binuitls: Switch to using binutils stable/2.25 branch
Khem Raj
raj.khem at gmail.com
Mon Apr 6 17:36:33 UTC 2015
We have a lot of patches on top of 2.25 release that we need
its easier/cleaner to use the git src instead of tarball and use
the latest on the 2.25 branch
Additionally, drop binutils-uclibc-300-006_better_file_error.patch
since it has been redone with
https://sourceware.org/ml/binutils/2006-10/msg00337.html upstream
git'ify the patches against upstream repos for better maintainance
Change-Id: I572c9bb49f60853e7ade4e8f63ab77b7e41476c5
Signed-off-by: Khem Raj <raj.khem at gmail.com>
---
meta/recipes-devtools/binutils/binutils-2.25.inc | 40 +-
.../binutils/binutils-crosssdk_2.25.bb | 2 +-
...ild-breakage-from-bfd_set_section_vma-cha.patch | 31 -
....patch => 0001-Generate-relocatable-SDKs.patch} | 45 +-
...re-widen-the-regexp-for-SH-architectures.patch} | 42 +-
.../0003-Point-scripts-location-to-libdir.patch | 42 +
...te-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch | 41 +
...0005-Explicitly-link-with-libm-on-uclibc.patch} | 38 +-
...2.4-update.patch => 0006-Use-libtool-2.4.patch} | 29777 ++++++++++---------
...-Add-the-armv5e-architecture-to-binutils.patch} | 34 +-
...e-distro-compiler-point-to-the-wrong-ins.patch} | 33 +-
...tus-Inappropriate-distribution-codesourc.patch} | 191 +-
...rpath-in-libtool-when-sysroot-is-enabled.patch} | 25 +-
...hange-default-emulation-for-mips64-linux.patch} | 33 +-
...tch => 0012-Add-XLP-instructions-support.patch} | 48 +-
...nal-error-in-do_print_to_mapfile-seen-wi.patch} | 11 +-
...binutils-uclibc-300-001_ld_makefile_patch.patch | 55 -
...binutils-uclibc-300-006_better_file_error.patch | 45 -
...ils-uclibc-300-012_check_ldrunpath_length.patch | 49 -
.../binutils/binutils-uninitialised-warning.patch | 50 -
20 files changed, 15333 insertions(+), 15299 deletions(-)
delete mode 100644 meta/recipes-devtools/binutils/binutils/0001-Fix-MMIX-build-breakage-from-bfd_set_section_vma-cha.patch
rename meta/recipes-devtools/binutils/binutils/{relocatable_sdk.patch => 0001-Generate-relocatable-SDKs.patch} (56%)
rename meta/recipes-devtools/binutils/binutils/{binutils-uclibc-100-uclibc-conf.patch => 0002-configure-widen-the-regexp-for-SH-architectures.patch} (41%)
create mode 100644 meta/recipes-devtools/binutils/binutils/0003-Point-scripts-location-to-libdir.patch
create mode 100644 meta/recipes-devtools/binutils/binutils/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch
rename meta/recipes-devtools/binutils/binutils/{binutils-uclibc-gas-needs-libm.patch => 0005-Explicitly-link-with-libm-on-uclibc.patch} (49%)
rename meta/recipes-devtools/binutils/binutils/{libtool-2.4-update.patch => 0006-Use-libtool-2.4.patch} (95%)
rename meta/recipes-devtools/binutils/binutils/{binutils-armv5e.patch => 0007-Add-the-armv5e-architecture-to-binutils.patch} (43%)
rename meta/recipes-devtools/binutils/binutils/{libiberty_path_fix.patch => 0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch} (43%)
rename meta/recipes-devtools/binutils/binutils/{binutils-poison.patch => 0009-Upstream-Status-Inappropriate-distribution-codesourc.patch} (75%)
rename meta/recipes-devtools/binutils/binutils/{libtool-rpath-fix.patch => 0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch} (74%)
rename meta/recipes-devtools/binutils/binutils/{mips64-default-ld-emulation.patch => 0011-Change-default-emulation-for-mips64-linux.patch} (73%)
rename meta/recipes-devtools/binutils/binutils/{binutils-xlp-support.patch => 0012-Add-XLP-instructions-support.patch} (93%)
rename meta/recipes-devtools/binutils/binutils/{0001-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch => 0013-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch} (76%)
delete mode 100644 meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-001_ld_makefile_patch.patch
delete mode 100644 meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-006_better_file_error.patch
delete mode 100644 meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-012_check_ldrunpath_length.patch
delete mode 100644 meta/recipes-devtools/binutils/binutils/binutils-uninitialised-warning.patch
diff --git a/meta/recipes-devtools/binutils/binutils-2.25.inc b/meta/recipes-devtools/binutils/binutils-2.25.inc
index d9075b6..6f76530 100644
--- a/meta/recipes-devtools/binutils/binutils-2.25.inc
+++ b/meta/recipes-devtools/binutils/binutils-2.25.inc
@@ -10,22 +10,30 @@ LIC_FILES_CHKSUM="\
file://bfd/COPYING;md5=d32239bcb673463ab874e80d47fae504\
"
+def binutils_branch_version(d):
+ pvsplit = d.getVar('PV', True).split('.')
+ return pvsplit[0] + "_" + pvsplit[1]
+
+BINUPV = "${@binutils_branch_version(d)}"
+
+SRCREV = "f2df1e49400f9e2d8d63a5d0fec9bf8c5c2b3342"
SRC_URI = "\
- ${GNU_MIRROR}/binutils/binutils-${PV}.tar.bz2 \
- file://binutils-uclibc-100-uclibc-conf.patch \
- file://binutils-uclibc-300-001_ld_makefile_patch.patch \
- file://binutils-uclibc-300-006_better_file_error.patch \
- file://binutils-uclibc-300-012_check_ldrunpath_length.patch \
- file://binutils-uclibc-gas-needs-libm.patch \
- file://libtool-2.4-update.patch \
- file://libiberty_path_fix.patch \
- file://binutils-poison.patch \
- file://libtool-rpath-fix.patch \
- file://binutils-armv5e.patch \
- file://mips64-default-ld-emulation.patch \
- file://binutils-xlp-support.patch \
- file://0001-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch \
+ git://sourceware.org/git/binutils-gdb.git;branch=binutils-${BINUPV}-branch;protocol=git \
+ file://0002-configure-widen-the-regexp-for-SH-architectures.patch \
+ file://0003-Point-scripts-location-to-libdir.patch \
+ file://0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch \
+ file://0005-Explicitly-link-with-libm-on-uclibc.patch \
+ file://0006-Use-libtool-2.4.patch \
+ file://0007-Add-the-armv5e-architecture-to-binutils.patch \
+ file://0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch \
+ file://0009-Upstream-Status-Inappropriate-distribution-codesourc.patch \
+ file://0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch \
+ file://0011-Change-default-emulation-for-mips64-linux.patch \
+ file://0012-Add-XLP-instructions-support.patch \
+ file://0013-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch \
"
-SRC_URI[md5sum] = "d9f3303f802a5b6b0bb73a335ab89d66"
-SRC_URI[sha256sum] = "22defc65cfa3ef2a3395faaea75d6331c6e62ea5dfacfed3e2ec17b08c882923"
+S = "${WORKDIR}/git"
+do_configure_prepend () {
+ rm -rf ${S}/gdb ${S}/libdecnumber ${S}/readline ${S}/sim
+}
diff --git a/meta/recipes-devtools/binutils/binutils-crosssdk_2.25.bb b/meta/recipes-devtools/binutils/binutils-crosssdk_2.25.bb
index b6d9a21..788106f 100644
--- a/meta/recipes-devtools/binutils/binutils-crosssdk_2.25.bb
+++ b/meta/recipes-devtools/binutils/binutils-crosssdk_2.25.bb
@@ -6,7 +6,7 @@ PN = "binutils-crosssdk-${TARGET_ARCH}"
PROVIDES = "virtual/${TARGET_PREFIX}binutils-crosssdk"
-SRC_URI += "file://relocatable_sdk.patch"
+SRC_URI += "file://0001-Generate-relocatable-SDKs.patch"
do_configure_prepend () {
sed -i 's#/usr/local/lib /lib /usr/lib#${SDKPATHNATIVE}/lib ${SDKPATHNATIVE}/usr/lib /usr/local/lib /lib /usr/lib#' ${S}/ld/configure.tgt
diff --git a/meta/recipes-devtools/binutils/binutils/0001-Fix-MMIX-build-breakage-from-bfd_set_section_vma-cha.patch b/meta/recipes-devtools/binutils/binutils/0001-Fix-MMIX-build-breakage-from-bfd_set_section_vma-cha.patch
deleted file mode 100644
index f786b17..0000000
--- a/meta/recipes-devtools/binutils/binutils/0001-Fix-MMIX-build-breakage-from-bfd_set_section_vma-cha.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Upstream-Status: Backport
-
-From 0a09fb4a09e80c36fa3ef763ae276fd13d272a36 Mon Sep 17 00:00:00 2001
-From: Hans-Peter Nilsson <hp at bitrange.com>
-Date: Sat, 1 Feb 2014 01:11:28 +0100
-Subject: [PATCH] Fix MMIX build breakage from bfd_set_section_vma change.
-
- * emultempl/mmix-elfnmmo.em (mmix_after_allocation): Fix typo in
- call to bfd_set_section_vma exposed by recent bfd_set_section_vma
- change.
----
- ld/ChangeLog | 6 ++++++
- ld/emultempl/mmix-elfnmmo.em | 2 +-
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
-diff --git a/ld/emultempl/mmix-elfnmmo.em b/ld/emultempl/mmix-elfnmmo.em
-index 0059792..5e9781a 100644
---- a/ld/emultempl/mmix-elfnmmo.em
-+++ b/ld/emultempl/mmix-elfnmmo.em
-@@ -102,7 +102,7 @@ mmix_after_allocation (void)
- This section is only present when there are register symbols. */
- sec = bfd_get_section_by_name (link_info.output_bfd, MMIX_REG_SECTION_NAME);
- if (sec != NULL)
-- bfd_set_section_vma (abfd, sec, 0);
-+ bfd_set_section_vma (sec->owner, sec, 0);
-
- if (!_bfd_mmix_after_linker_allocation (link_info.output_bfd, &link_info))
- {
---
-1.7.10.4
-
diff --git a/meta/recipes-devtools/binutils/binutils/relocatable_sdk.patch b/meta/recipes-devtools/binutils/binutils/0001-Generate-relocatable-SDKs.patch
similarity index 56%
rename from meta/recipes-devtools/binutils/binutils/relocatable_sdk.patch
rename to meta/recipes-devtools/binutils/binutils/0001-Generate-relocatable-SDKs.patch
index 7408c31..1e80c1f 100644
--- a/meta/recipes-devtools/binutils/binutils/relocatable_sdk.patch
+++ b/meta/recipes-devtools/binutils/binutils/0001-Generate-relocatable-SDKs.patch
@@ -1,17 +1,27 @@
-Upstream-Status: Inappropriate [SDK specific]
+From f71ecf251f84b4bbc9b7a832d5cd4a8bae95d83b Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:58:54 +0000
+Subject: [PATCH 01/13] Generate relocatable SDKs
+
+This patch will modify the ELF linker scripts so that the crosssdk
+linker will generate binaries with a 4096 bytes PT_INTERP section. When the binaries
+will be relocated, at SDK install time, the interpreter path can be easily
+changed by the relocating script.
-This patch will modify the ELF linker scripts so that the crosssdk linker will
-generate binaries with a 4096 bytes PT_INTERP section. When the binaries will
-be relocated, at SDK install time, the interpreter path can be easily changed
-by the relocating script.
+Upstream-Status: Inappropriate [SDK specific]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu at intel.com>
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ ld/genscripts.sh | 3 +++
+ ld/scripttempl/elf.sc | 4 ++--
+ 2 files changed, 5 insertions(+), 2 deletions(-)
-Index: binutils_git/ld/genscripts.sh
-===================================================================
---- binutils_git.orig/ld/genscripts.sh 2012-11-21 11:58:23.325441925 +0200
-+++ binutils_git/ld/genscripts.sh 2012-11-21 12:03:42.106815400 +0200
-@@ -290,6 +290,7 @@
+diff --git a/ld/genscripts.sh b/ld/genscripts.sh
+index 499607a..075dd04 100755
+--- a/ld/genscripts.sh
++++ b/ld/genscripts.sh
+@@ -277,6 +277,7 @@ DATA_ALIGNMENT_u="${DATA_ALIGNMENT_u-${DATA_ALIGNMENT_r}}"
LD_FLAG=r
DATA_ALIGNMENT=${DATA_ALIGNMENT_r}
DEFAULT_DATA_ALIGNMENT="ALIGN(${SEGMENT_SIZE})"
@@ -19,7 +29,7 @@ Index: binutils_git/ld/genscripts.sh
( echo "/* Script for ld -r: link without relocation */"
. ${CUSTOMIZER_SCRIPT}
. ${srcdir}/scripttempl/${SCRIPT_NAME}.sc
-@@ -298,10 +299,12 @@
+@@ -285,10 +286,12 @@ DEFAULT_DATA_ALIGNMENT="ALIGN(${SEGMENT_SIZE})"
LD_FLAG=u
DATA_ALIGNMENT=${DATA_ALIGNMENT_u}
CONSTRUCTING=" "
@@ -32,11 +42,11 @@ Index: binutils_git/ld/genscripts.sh
LD_FLAG=
DATA_ALIGNMENT=${DATA_ALIGNMENT_}
-Index: binutils_git/ld/scripttempl/elf.sc
-===================================================================
---- binutils_git.orig/ld/scripttempl/elf.sc 2012-11-21 12:02:26.800377384 +0200
-+++ binutils_git/ld/scripttempl/elf.sc 2012-11-21 12:04:16.166109621 +0200
-@@ -124,8 +124,8 @@
+diff --git a/ld/scripttempl/elf.sc b/ld/scripttempl/elf.sc
+index 4368fd9..9f01e8c 100644
+--- a/ld/scripttempl/elf.sc
++++ b/ld/scripttempl/elf.sc
+@@ -131,8 +131,8 @@ if test -n "${COMMONPAGESIZE}"; then
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
@@ -47,3 +57,6 @@ Index: binutils_git/ld/scripttempl/elf.sc
fi
if test -z "$PLT"; then
IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }"
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-100-uclibc-conf.patch b/meta/recipes-devtools/binutils/binutils/0002-configure-widen-the-regexp-for-SH-architectures.patch
similarity index 41%
rename from meta/recipes-devtools/binutils/binutils/binutils-uclibc-100-uclibc-conf.patch
rename to meta/recipes-devtools/binutils/binutils/0002-configure-widen-the-regexp-for-SH-architectures.patch
index b5a25c2..34e21d1 100644
--- a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-100-uclibc-conf.patch
+++ b/meta/recipes-devtools/binutils/binutils/0002-configure-widen-the-regexp-for-SH-architectures.patch
@@ -1,10 +1,23 @@
+From dfbcfb0d71765b337e63562299a943043928d2d2 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:07:33 +0000
+Subject: [PATCH 02/13] configure: widen the regexp for SH architectures
+
+gprof needs to know about uclibc
+
Upstream-Status: Pending
-Index: binutils-2.22/configure
-===================================================================
---- binutils-2.22.orig/configure
-+++ binutils-2.22/configure
-@@ -3130,7 +3130,7 @@ case "${target}" in
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ configure | 4 ++--
+ gprof/configure | 5 +++++
+ 2 files changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/configure b/configure
+index 87677bc..e9f2f13 100755
+--- a/configure
++++ b/configure
+@@ -3341,7 +3341,7 @@ case "${target}" in
;;
s390-*-* | s390x-*-*)
;;
@@ -13,20 +26,20 @@ Index: binutils-2.22/configure
;;
sh64-*-* | sh5*-*-*)
;;
-@@ -3570,7 +3570,7 @@ case "${target}" in
- mips*-*-*)
- noconfigdirs="$noconfigdirs gprof"
+@@ -3812,7 +3812,7 @@ case "${target}" in
+ or1k*-*-*)
+ noconfigdirs="$noconfigdirs gdb"
;;
- sh-*-* | sh64-*-*)
+ sh*-*-* | sh64-*-*)
case "${target}" in
sh*-*-elf)
;;
-Index: binutils-2.22/gprof/configure
-===================================================================
---- binutils-2.22.orig/gprof/configure
-+++ binutils-2.22/gprof/configure
-@@ -6103,6 +6103,11 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+diff --git a/gprof/configure b/gprof/configure
+index b09c8fb..79961c5 100755
+--- a/gprof/configure
++++ b/gprof/configure
+@@ -5869,6 +5869,11 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
@@ -38,3 +51,6 @@ Index: binutils-2.22/gprof/configure
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/0003-Point-scripts-location-to-libdir.patch b/meta/recipes-devtools/binutils/binutils/0003-Point-scripts-location-to-libdir.patch
new file mode 100644
index 0000000..f5ce767
--- /dev/null
+++ b/meta/recipes-devtools/binutils/binutils/0003-Point-scripts-location-to-libdir.patch
@@ -0,0 +1,42 @@
+From dfb1412da67bbfe3e993d107d0b5e392f44141ab Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:09:58 +0000
+Subject: [PATCH 03/13] Point scripts location to libdir
+
+Upstream-Status: Inappropriate [debian patch]
+
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ ld/Makefile.am | 2 +-
+ ld/Makefile.in | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/ld/Makefile.am b/ld/Makefile.am
+index 9575f1f..84df0bf 100644
+--- a/ld/Makefile.am
++++ b/ld/Makefile.am
+@@ -54,7 +54,7 @@ endif
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+
+ EMUL = @EMUL@
+ EMULATION_OFILES = @EMULATION_OFILES@
+diff --git a/ld/Makefile.in b/ld/Makefile.in
+index 9f56ca1..272860f 100644
+--- a/ld/Makefile.in
++++ b/ld/Makefile.in
+@@ -388,7 +388,7 @@ AM_CFLAGS = $(WARN_CFLAGS)
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ BASEDIR = $(srcdir)/..
+ BFDDIR = $(BASEDIR)/bfd
+ INCDIR = $(BASEDIR)/include
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch b/meta/recipes-devtools/binutils/binutils/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch
new file mode 100644
index 0000000..e3cd2a4
--- /dev/null
+++ b/meta/recipes-devtools/binutils/binutils/0004-Only-generate-an-RPATH-entry-if-LD_RUN_PATH-is-not-e.patch
@@ -0,0 +1,41 @@
+From 3126608b8c95a792ade56cf62a531d935d391c50 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:27:17 +0000
+Subject: [PATCH 04/13] Only generate an RPATH entry if LD_RUN_PATH is not
+ empty
+
+for cases where -rpath isn't specified. debian (#151024)
+
+Upstream-Status: Pending
+
+Signed-off-by: Chris Chimelis <chris at debian.org>
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ ld/emultempl/elf32.em | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/ld/emultempl/elf32.em b/ld/emultempl/elf32.em
+index 36dee8e..07bea52 100644
+--- a/ld/emultempl/elf32.em
++++ b/ld/emultempl/elf32.em
+@@ -1198,6 +1198,8 @@ fragment <<EOF
+ && command_line.rpath == NULL)
+ {
+ lib_path = (const char *) getenv ("LD_RUN_PATH");
++ if ((lib_path) && (strlen (lib_path) == 0))
++ lib_path = NULL;
+ if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
+ force))
+ break;
+@@ -1461,6 +1463,8 @@ gld${EMULATION_NAME}_before_allocation (void)
+ rpath = command_line.rpath;
+ if (rpath == NULL)
+ rpath = (const char *) getenv ("LD_RUN_PATH");
++ if ((rpath) && (strlen (rpath) == 0))
++ rpath = NULL;
+
+ for (abfd = link_info.input_bfds; abfd; abfd = abfd->link.next)
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-gas-needs-libm.patch b/meta/recipes-devtools/binutils/binutils/0005-Explicitly-link-with-libm-on-uclibc.patch
similarity index 49%
rename from meta/recipes-devtools/binutils/binutils/binutils-uclibc-gas-needs-libm.patch
rename to meta/recipes-devtools/binutils/binutils/0005-Explicitly-link-with-libm-on-uclibc.patch
index 3869faf..9bbd93e 100644
--- a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-gas-needs-libm.patch
+++ b/meta/recipes-devtools/binutils/binutils/0005-Explicitly-link-with-libm-on-uclibc.patch
@@ -1,6 +1,7 @@
-Source: Khem Raj <raj.khem at gmail.com>
-Disposition: submit upstream.
-Upstream-Status: Pending
+From f1703bcc7a5c507e471e2630b5a2de129100315a Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:32:49 +0000
+Subject: [PATCH 05/13] Explicitly link with libm on uclibc
Description:
@@ -9,21 +10,31 @@ libtool has been updated upstream it include support for it. However
for building gas natively on uclibc systems we have to link it with
-lm so that it picks up missing symbols.
-/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_from_double':
+/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o):
+In function `floatformat_from_double':
floatformat.c:(.text+0x1ec): undefined reference to `frexp'
floatformat.c:(.text+0x2f8): undefined reference to `ldexp'
-/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_to_double':
+/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o):
+In function `floatformat_to_double':
floatformat.c:(.text+0x38a): undefined reference to `ldexp'
floatformat.c:(.text+0x3d2): undefined reference to `ldexp'
-floatformat.c:(.text+0x43e): undefined reference to `ldexp' floatformat.c:(.text+0x4e2): undefined reference to `ldexp'
+floatformat.c:(.text+0x43e): undefined reference to `ldexp'
+floatformat.c:(.text+0x4e2): undefined reference to `ldexp'
collect2: ld returned 1 exit status
make[4]: *** [as-new] Error 1
-Index: binutils-2.22/gas/configure.tgt
-===================================================================
---- binutils-2.22.orig/gas/configure.tgt
-+++ binutils-2.22/gas/configure.tgt
-@@ -428,6 +428,12 @@ case ${generic_target} in
+Upstream-Status: Pending
+
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ gas/configure.tgt | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/gas/configure.tgt b/gas/configure.tgt
+index 9abc768..1d92f55 100644
+--- a/gas/configure.tgt
++++ b/gas/configure.tgt
+@@ -477,6 +477,12 @@ case ${generic_target} in
*-*-netware) fmt=elf em=netware ;;
esac
@@ -34,5 +45,8 @@ Index: binutils-2.22/gas/configure.tgt
+esac
+
case ${cpu_type} in
- alpha | arm | i386 | ia64 | microblaze | mips | ns32k | pdp11 | ppc | sparc | z80 | z8k)
+ aarch64 | alpha | arm | i386 | ia64 | microblaze | mips | ns32k | or1k | or1knd | pdp11 | ppc | sparc | z80 | z8k)
bfd_gas=yes
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/libtool-2.4-update.patch b/meta/recipes-devtools/binutils/binutils/0006-Use-libtool-2.4.patch
similarity index 95%
rename from meta/recipes-devtools/binutils/binutils/libtool-2.4-update.patch
rename to meta/recipes-devtools/binutils/binutils/0006-Use-libtool-2.4.patch
index 9aaecd9..62967ef 100644
--- a/meta/recipes-devtools/binutils/binutils/libtool-2.4-update.patch
+++ b/meta/recipes-devtools/binutils/binutils/0006-Use-libtool-2.4.patch
@@ -1,386 +1,174 @@
-Upstream-Status: Inappropriate [embedded specific]
+From 03eb9b4fe583e88a22fd8c25b43fbd9bafe21af6 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:34:41 +0000
+Subject: [PATCH 06/13] Use libtool 2.4
-Index: binutils-2.24/libtool.m4
-===================================================================
---- binutils-2.24.orig/libtool.m4 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/libtool.m4 2013-12-15 11:10:23.863785363 -0800
-@@ -1,7 +1,8 @@
- # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
- #
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is free software; the Free Software Foundation gives
-@@ -10,7 +11,8 @@
-
- m4_define([_LT_COPYING], [dnl
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is part of GNU Libtool.
-@@ -37,7 +39,7 @@
- # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- ])
-
--# serial 56 LT_INIT
-+# serial 57 LT_INIT
-
-
- # LT_PREREQ(VERSION)
-@@ -92,7 +94,8 @@
- LIBTOOL_DEPS="$ltmain"
-
- # Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+LIBTOOL='$(SHELL) $(top_builddir)'
-+LIBTOOL="$LIBTOOL/${host_alias}-libtool"
- AC_SUBST(LIBTOOL)dnl
-
- _LT_SETUP
-@@ -166,10 +169,13 @@
- dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
- m4_require([_LT_CMD_RELOAD])dnl
- m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
- m4_require([_LT_CMD_OLD_ARCHIVE])dnl
- m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-+m4_require([_LT_WITH_SYSROOT])dnl
-
- _LT_CONFIG_LIBTOOL_INIT([
- # See if we are running on zsh, and set the options which allow our
-@@ -199,7 +205,7 @@
- esac
-
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
-
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -632,7 +638,7 @@
- m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
- configured by $[0], generated by m4_PACKAGE_STRING.
-
--Copyright (C) 2009 Free Software Foundation, Inc.
-+Copyright (C) 2010 Free Software Foundation, Inc.
- This config.lt script is free software; the Free Software Foundation
- gives unlimited permision to copy, distribute and modify it."
-
-@@ -746,15 +752,12 @@
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
-+ sed '$q' "$ltmain" >> "$cfgfile" \
-+ || (rm -f "$cfgfile"; exit 1)
+So we can get libtool sysroot support
+
+Upstream-Status: Pending
+
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ bfd/configure | 1320 +++++++++++++++++------
+ bfd/configure.ac | 2 +-
+ binutils/configure | 1318 +++++++++++++++++------
+ configure | 2 +-
+ gas/configure | 1318 +++++++++++++++++------
+ gprof/configure | 1323 +++++++++++++++++------
+ ld/configure | 1701 +++++++++++++++++++++--------
+ libtool.m4 | 1086 +++++++++++++------
+ ltmain.sh | 2925 +++++++++++++++++++++++++++++++++-----------------
+ ltoptions.m4 | 2 +-
+ ltversion.m4 | 12 +-
+ lt~obsolete.m4 | 2 +-
+ opcodes/configure | 1320 +++++++++++++++++------
+ opcodes/configure.ac | 2 +-
+ 14 files changed, 8952 insertions(+), 3381 deletions(-)
+
+diff --git a/bfd/configure b/bfd/configure
+index 85e6b82..3d3dd88 100755
+--- a/bfd/configure
++++ b/bfd/configure
+@@ -668,6 +668,9 @@ OTOOL
+ LIPO
+ NMEDIT
+ DSYMUTIL
++MANIFEST_TOOL
++ac_ct_AR
++DLLTOOL
+ OBJDUMP
+ LN_S
+ NM
+@@ -780,6 +783,7 @@ enable_static
+ with_pic
+ enable_fast_install
+ with_gnu_ld
++with_libtool_sysroot
+ enable_libtool_lock
+ enable_plugins
+ enable_largefile
+@@ -1456,6 +1460,8 @@ Optional Packages:
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).
+ --with-mmap try using mmap for BFD input files if available
+ --with-separate-debug-dir=DIR
+ Look for global separate debug info in DIR
+@@ -5386,8 +5392,8 @@ esac
-- _LT_PROG_XSI_SHELLFNS
-+ _LT_PROG_REPLACE_SHELLFNS
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
--
-- mv -f "$cfgfile" "$ofile" ||
-+ mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
- ],
-@@ -980,6 +983,8 @@
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
- echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
- $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
- cat > conftest.c << _LT_EOF
- int main() { return 0;}
- _LT_EOF
-@@ -1069,30 +1074,41 @@
- fi
- ])
--# _LT_SYS_MODULE_PATH_AIX
--# -----------------------
-+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-+# ----------------------------------
- # Links a minimal program and checks the executable
- # for the system default hardcoded library path. In most cases,
- # this is /usr/lib:/lib, but when the MPI compilers are used
- # the location of the communication and MPI libs are included too.
- # If we don't find anything, use the default library path according
- # to the aix ld manual.
-+# Store the results from the different compilers for each TAGNAME.
-+# Allow to override them for all tags through lt_cv_aix_libpath.
- m4_defun([_LT_SYS_MODULE_PATH_AIX],
- [m4_require([_LT_DECL_SED])dnl
--AC_LINK_IFELSE(AC_LANG_PROGRAM,[
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi],[])
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
-+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
-+ lt_aix_libpath_sed='[
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }]'
-+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi],[])
-+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
-+ fi
-+ ])
-+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-+fi
- ])# _LT_SYS_MODULE_PATH_AIX
+-macro_version='2.2.7a'
+-macro_revision='1.3134'
++macro_version='2.4'
++macro_revision='1.3293'
-@@ -1117,7 +1133,7 @@
- AC_MSG_CHECKING([how to print strings])
+@@ -5427,7 +5433,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+ $as_echo_n "checking how to print strings... " >&6; }
# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -1161,6 +1177,39 @@
- ])# _LT_PROG_ECHO_BACKSLASH
+@@ -6113,8 +6119,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -6163,6 +6169,80 @@ esac
-+# _LT_WITH_SYSROOT
-+# ----------------
-+AC_DEFUN([_LT_WITH_SYSROOT],
-+[AC_MSG_CHECKING([for sysroot])
-+AC_ARG_WITH([libtool-sysroot],
-+[ --with-libtool-sysroot[=DIR] Search for dependent libraries within DIR
-+ (or the compiler's sysroot if not specified).],
-+[], [with_libtool_sysroot=no])
-+
-+dnl lt_sysroot will always be passed unquoted. We quote it here
-+dnl in case the user passed a directory name.
-+lt_sysroot=
-+case ${with_libtool_sysroot} in #(
-+ yes)
-+ if test "$GCC" = yes; then
-+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-+ fi
-+ ;; #(
-+ /*)
-+ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
-+ ;; #(
-+ no|'')
-+ ;; #(
-+ *)
-+ AC_MSG_RESULT([${with_libtool_sysroot}])
-+ AC_MSG_ERROR([The sysroot must be an absolute path.])
-+ ;;
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
++$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
++if test "${lt_cv_to_host_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
+esac
+
-+ AC_MSG_RESULT([${lt_sysroot:-no}])
-+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-+[dependent libraries, and in which our libraries should be installed.])])
++fi
+
- # _LT_ENABLE_LOCK
- # ---------------
- m4_defun([_LT_ENABLE_LOCK],
-@@ -1320,14 +1369,47 @@
- ])# _LT_ENABLE_LOCK
-
-
-+# _LT_PROG_AR
-+# -----------
-+m4_defun([_LT_PROG_AR],
-+[AC_CHECK_TOOLS(AR, [ar], false)
-+: ${AR=ar}
-+: ${AR_FLAGS=cru}
-+_LT_DECL([], [AR], [1], [The archiver])
-+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
++$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
-+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
-+ [lt_cv_ar_at_file=no
-+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-+ [echo conftest.$ac_objext > conftest.lst
-+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
-+ AC_TRY_EVAL([lt_ar_try])
-+ if test "$ac_status" -eq 0; then
-+ # Ensure the archiver fails upon bogus file names.
-+ rm -f conftest.$ac_objext libconftest.a
-+ AC_TRY_EVAL([lt_ar_try])
-+ if test "$ac_status" -ne 0; then
-+ lt_cv_ar_at_file=@
-+ fi
-+ fi
-+ rm -f conftest.* libconftest.a
-+ ])
-+ ])
+
-+if test "x$lt_cv_ar_at_file" = xno; then
-+ archiver_list_spec=
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
++if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+else
-+ archiver_list_spec=$lt_cv_ar_at_file
++ #assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
++
+fi
-+_LT_DECL([], [archiver_list_spec], [1],
-+ [How to feed a file listing to the archiver])
-+])# _LT_PROG_AR
+
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
++$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
- # _LT_CMD_OLD_ARCHIVE
- # -------------------
- m4_defun([_LT_CMD_OLD_ARCHIVE],
--[AC_CHECK_TOOL(AR, ar, false)
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
--_LT_DECL([], [AR], [1], [The archiver])
--_LT_DECL([], [AR_FLAGS], [1])
-+[_LT_PROG_AR
-
- AC_CHECK_TOOL(STRIP, strip, :)
- test -z "$STRIP" && STRIP=:
-@@ -1623,7 +1705,7 @@
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
--[#line __oline__ "configure"
-+[#line $LINENO "configure"
- #include "confdefs.h"
-
- #if HAVE_DLFCN_H
-@@ -1667,10 +1749,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
-
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -2210,8 +2292,9 @@
- need_version=no
- need_lib_prefix=no
-
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -2244,13 +2327,71 @@
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
-+ ;;
+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
-
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -2342,7 +2483,7 @@
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-@@ -2950,6 +3091,11 @@
++
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+ $as_echo_n "checking for $LD option to reload object files... " >&6; }
+ if test "${lt_cv_ld_reload_flag+set}" = set; then :
+@@ -6179,6 +6259,11 @@ case $reload_flag in
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
@@ -392,7 +180,7 @@ Index: binutils-2.24/libtool.m4
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -3016,7 +3162,8 @@
+@@ -6347,7 +6432,8 @@ mingw* | pw32*)
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -402,10 +190,10 @@ Index: binutils-2.24/libtool.m4
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-@@ -3167,6 +3314,21 @@
- ;;
- esac
- ])
+@@ -6501,6 +6587,21 @@ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+ $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
@@ -415,7 +203,7 @@ Index: binutils-2.24/libtool.m4
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
-+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
@@ -424,145 +212,356 @@ Index: binutils-2.24/libtool.m4
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -3174,7 +3336,11 @@
- _LT_DECL([], [deplibs_check_method], [1],
- [Method to check whether dependent libraries are shared objects])
- _LT_DECL([], [file_magic_cmd], [1],
-- [Command to use when deplibs_check_method == "file_magic"])
-+ [Command to use when deplibs_check_method = "file_magic"])
-+_LT_DECL([], [file_magic_glob], [1],
-+ [How to find potential files when deplibs_check_method = "file_magic"])
-+_LT_DECL([], [want_nocaseglob], [1],
-+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
- ])# _LT_CHECK_MAGIC_METHOD
+@@ -6516,9 +6617,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -3277,6 +3443,67 @@
- dnl AC_DEFUN([AM_PROG_NM], [])
- dnl AC_DEFUN([AC_PROG_NM], [])
-+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-+# --------------------------------
-+# how to determine the name of the shared library
-+# associated with a specific link library.
-+# -- PORTME fill in with the dynamic library characteristics
-+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-+[m4_require([_LT_DECL_EGREP])
-+m4_require([_LT_DECL_OBJDUMP])
-+m4_require([_LT_DECL_DLLTOOL])
-+AC_CACHE_CHECK([how to associate runtime and link libraries],
-+lt_cv_sharedlib_from_linklib_cmd,
-+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
-+case $host_os in
-+cygwin* | mingw* | pw32* | cegcc*)
-+ # two different shell functions defined in ltmain.sh
-+ # decide which to use based on capabilities of $DLLTOOL
-+ case `$DLLTOOL --help 2>&1` in
-+ *--identify-strict*)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-+ ;;
-+ *)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-+ ;;
-+ esac
-+ ;;
-+*)
-+ # fallback: assume linklib IS sharedlib
-+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-+ ;;
-+esac
-+])
-+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
-+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
-+ [Command to associate shared and link libraries])
-+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
-+# _LT_PATH_MANIFEST_TOOL
-+# ----------------------
-+# locate the manifest tool
-+m4_defun([_LT_PATH_MANIFEST_TOOL],
-+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
-+ [lt_cv_path_mainfest_tool=no
-+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
-+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-+ cat conftest.err >&AS_MESSAGE_LOG_FD
-+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-+ lt_cv_path_mainfest_tool=yes
++
++
++
++
++
++
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DLLTOOL"; then
++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
+ fi
-+ rm -f conftest*])
-+if test "x$lt_cv_path_mainfest_tool" != xyes; then
-+ MANIFEST_TOOL=:
++done
++ done
++IFS=$as_save_IFS
++
+fi
-+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-+])# _LT_PATH_MANIFEST_TOOL
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++ ac_ct_DLLTOOL=$DLLTOOL
++ # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DLLTOOL"; then
++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_DLLTOOL" = x; then
++ DLLTOOL="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DLLTOOL=$ac_ct_DLLTOOL
++ fi
++else
++ DLLTOOL="$ac_cv_prog_DLLTOOL"
++fi
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
++$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++
++
+
++
++
++
++if test -n "$ac_tool_prefix"; then
++ for ac_prog in ar
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_AR+set}" = set; then :
+@@ -6534,7 +6788,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_AR="${ac_tool_prefix}ar"
++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6554,11 +6808,15 @@ $as_echo "no" >&6; }
+ fi
- # LT_LIB_M
- # --------
-@@ -3403,8 +3630,8 @@
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- # Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
--lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++ test -n "$AR" && break
++ done
+ fi
+-if test -z "$ac_cv_prog_AR"; then
++if test -z "$AR"; then
+ ac_ct_AR=$AR
+- # Extract the first word of "ar", so it can be a program name with args.
+-set dummy ar; ac_word=$2
++ for ac_prog in ar
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+@@ -6574,7 +6832,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_ac_ct_AR="ar"
++ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6593,6 +6851,10 @@ else
+ $as_echo "no" >&6; }
+ fi
- # Handle CRLF in mingw tool chain
- opt_cr=
-@@ -3440,6 +3667,7 @@
++
++ test -n "$ac_ct_AR" && break
++done
++
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+@@ -6604,16 +6866,72 @@ ac_tool_warned=yes ;;
+ esac
+ AR=$ac_ct_AR
fi
-+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+-else
+- AR="$ac_cv_prog_AR"
+ fi
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -3473,6 +3701,18 @@
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT@&t at _DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT@&t at _DLSYM_CONST
-+#else
-+# define LT@&t at _DLSYM_CONST const
-+#endif
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
++: ${AR=ar}
++: ${AR_FLAGS=cru}
+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -3484,7 +3724,7 @@
- cat <<_LT_EOF >> conftest.$ac_ext
-
- /* The mapping between symbol names and symbols. */
--const struct {
-+LT@&t at _DLSYM_CONST struct {
- const char *name;
- void *address;
- }
-@@ -3510,15 +3750,15 @@
- _LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-+ lt_globsym_save_LIBS=$LIBS
-+ lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
++$as_echo_n "checking for archiver @FILE support... " >&6; }
++if test "${lt_cv_ar_at_file+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ar_at_file=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
+
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
+
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
++$as_echo "$lt_cv_ar_at_file" >&6; }
+
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
+
+
+
+@@ -6955,8 +7273,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -6992,6 +7310,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -7033,6 +7352,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -7044,7 +7375,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -7070,8 +7401,8 @@ static const void *lt_preloaded_setup() {
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+@@ -7081,8 +7412,8 @@ _LT_EOF
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
@@ -570,933 +569,1025 @@ Index: binutils-2.24/libtool.m4
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ echo "cannot find nm_test_func in $nlist" >&5
fi
-@@ -3551,6 +3791,13 @@
- AC_MSG_RESULT(ok)
+@@ -7119,6 +7450,16 @@ else
+ $as_echo "ok" >&6; }
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
-+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
- _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
- [Take the output of nm and produce a listing of raw symbols and C names])
- _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-@@ -3561,6 +3808,8 @@
- _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
- [Transform the output of nm in a C name address pair when lib prefix is needed])
-+_LT_DECL([], [nm_file_list_spec], [1],
-+ [Specify filename containing input files for $NM])
- ]) # _LT_CMD_GLOBAL_SYMBOLS
++
++
++
-@@ -3572,7 +3821,6 @@
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
--AC_MSG_CHECKING([for $compiler option to produce PIC])
- m4_if([$1], [CXX], [
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
-@@ -3678,6 +3926,12 @@
- ;;
- esac
- ;;
-+ mingw* | cygwin* | os2* | pw32* | cegcc*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ m4_if([$1], [GCJ], [],
-+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-+ ;;
- dgux*)
- case $cc_basename in
- ec++*)
-@@ -3830,7 +4084,7 @@
- ;;
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-@@ -4053,6 +4307,12 @@
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
- ;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
-+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -4115,7 +4375,7 @@
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-@@ -4172,9 +4432,11 @@
- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
- ;;
- esac
--AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
--_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-- [How to pass a linker flag through the compiler])
-+
-+AC_CACHE_CHECK([for $compiler option to produce PIC],
-+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
-+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+@@ -7140,6 +7481,45 @@ fi
- #
- # Check to make sure the PIC flag actually works.
-@@ -4193,6 +4455,8 @@
- _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
- [Additional compiler flags for building library objects])
-+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-+ [How to pass a linker flag through the compiler])
- #
- # Check to make sure the static flag actually works.
- #
-@@ -4213,6 +4477,7 @@
- m4_defun([_LT_LINKER_SHLIBS],
- [AC_REQUIRE([LT_PATH_LD])dnl
- AC_REQUIRE([LT_PATH_NM])dnl
-+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_EGREP])dnl
- m4_require([_LT_DECL_SED])dnl
-@@ -4221,6 +4486,7 @@
- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- m4_if([$1], [CXX], [
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- case $host_os in
- aix[[4-9]]*)
- # If we're using GNU nm, then we don't want the "-C" option.
-@@ -4235,15 +4501,20 @@
- ;;
- pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-- ;;
-+ ;;
- cygwin* | mingw* | cegcc*)
-- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-+ case $cc_basename in
-+ cl*) ;;
-+ *)
-+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-+ ;;
-+ esac
-+ ;;
- *)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-+ ;;
- esac
-- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- ], [
- runpath_var=
- _LT_TAGVAR(allow_undefined_flag, $1)=
-@@ -4411,7 +4682,8 @@
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -4459,7 +4731,7 @@
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -4510,12 +4782,12 @@
- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
-@@ -4529,8 +4801,8 @@
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
++$as_echo_n "checking for sysroot... " >&6; }
++
++# Check whether --with-libtool-sysroot was given.
++if test "${with_libtool_sysroot+set}" = set; then :
++ withval=$with_libtool_sysroot;
++else
++ with_libtool_sysroot=no
++fi
++
++
++lt_sysroot=
++case ${with_libtool_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
++$as_echo "${with_libtool_sysroot}" >&6; }
++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
++ ;;
++esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
++$as_echo "${lt_sysroot:-no}" >&6; }
++
++
++
++
++
+ # Check whether --enable-libtool-lock was given.
+ if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+@@ -7346,6 +7726,123 @@ esac
+
+ need_locks="$enable_libtool_lock"
-@@ -4548,8 +4820,8 @@
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
++set dummy ${ac_tool_prefix}mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$MANIFEST_TOOL"; then
++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
++if test -n "$MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
++$as_echo "$MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
++ # Extract the first word of "mt", so it can be a program name with args.
++set dummy mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_MANIFEST_TOOL"; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
++if test -n "$ac_ct_MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_MANIFEST_TOOL" = x; then
++ MANIFEST_TOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ fi
++else
++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++fi
++
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
++if test "${lt_cv_path_mainfest_tool+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&5
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
++$as_echo "$lt_cv_path_mainfest_tool" >&6; }
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++
++
++
++
++
+ case $host_os in
+ rhapsody* | darwin*)
+@@ -7909,6 +8406,8 @@ _LT_EOF
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
++ echo "$RANLIB libconftest.a" >&5
++ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+ int main() { return 0;}
_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
-@@ -4595,8 +4867,8 @@
+@@ -8073,7 +8572,8 @@ fi
+ LIBTOOL_DEPS="$ltmain"
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
-@@ -4726,7 +4998,7 @@
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- _LT_SYS_MODULE_PATH_AIX
-+ _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
-@@ -4737,7 +5009,7 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- _LT_SYS_MODULE_PATH_AIX
-+ _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
-@@ -4781,20 +5053,63 @@
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
-- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-- # FIXME: Should let the user specify the lib program.
-- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_TAGVAR(always_export_symbols, $1)=yes
-+ _LT_TAGVAR(file_list_spec, $1)='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-+ # FIXME: Should let the user specify the lib program.
-+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+
+
+
+@@ -8162,7 +8662,7 @@ aix3*)
+ esac
+
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -8460,8 +8960,6 @@ fi
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8627,6 +9125,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
+ ;;
-+ esac
- ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -8689,7 +9193,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+@@ -8746,13 +9250,17 @@ case $host_os in
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+ esac
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
+-
+-
+-
+-
- darwin* | rhapsody*)
-@@ -4828,7 +5143,7 @@
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-@@ -4836,7 +5151,7 @@
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -8813,6 +9321,11 @@ fi
- hpux9*)
- if test "$GCC" = yes; then
-- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
-@@ -4852,7 +5167,7 @@
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
-@@ -4876,10 +5191,10 @@
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
++
++
++
++
++
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -9163,7 +9676,8 @@ _LT_EOF
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -9211,7 +9725,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -9262,12 +9776,12 @@ _LT_EOF
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
;;
esac
+@@ -9281,8 +9795,8 @@ _LT_EOF
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
else
-@@ -4926,16 +5241,31 @@
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- AC_LINK_IFELSE(int foo(void) {},
-- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-- )
-- LDFLAGS="$save_LDFLAGS"
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
-+ [lt_cv_irix_exported_symbol],
-+ [save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ AC_LINK_IFELSE(
-+ [AC_LANG_SOURCE(
-+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
-+ [C++], [[int foo (void) { return 0; }]],
-+ [Fortran 77], [[
-+ subroutine foo
-+ end]],
-+ [Fortran], [[
-+ subroutine foo
-+ end]])])],
-+ [lt_cv_irix_exported_symbol=yes],
-+ [lt_cv_irix_exported_symbol=no])
-+ LDFLAGS="$save_LDFLAGS"])
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-+ fi
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -5020,7 +5350,7 @@
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+@@ -9300,8 +9814,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-@@ -5039,9 +5369,9 @@
- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ld_shlibs=no
+ fi
+@@ -9347,8 +9861,8 @@ _LT_EOF
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -5313,8 +5643,6 @@
- to runtime path list])
- _LT_TAGDECL([], [link_all_deplibs], [0],
- [Whether libtool must link a program against all its dependency libraries])
--_LT_TAGDECL([], [fix_srcfile_path], [1],
-- [Fix the shell variable $srcfile for the compiler])
- _LT_TAGDECL([], [always_export_symbols], [0],
- [Set to "yes" if exported symbols are required])
- _LT_TAGDECL([], [export_symbols_cmds], [2],
-@@ -5325,6 +5653,8 @@
- [Symbols that must always be exported])
- _LT_TAGDECL([], [prelink_cmds], [2],
- [Commands necessary for linking programs (against libraries) with templates])
-+_LT_TAGDECL([], [postlink_cmds], [2],
-+ [Commands necessary for finishing linking programs])
- _LT_TAGDECL([], [file_list_spec], [1],
- [Specify filename containing input files])
- dnl FIXME: Not yet implemented
-@@ -5426,6 +5756,7 @@
- m4_defun([_LT_LANG_CXX_CONFIG],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_EGREP])dnl
-+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
-@@ -5487,6 +5818,7 @@
+ ld_shlibs=no
+ fi
+@@ -9478,7 +9992,13 @@ _LT_EOF
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
- # Allow CC to be a program name with arguments.
- lt_save_CC=$CC
-+ lt_save_CFLAGS=$CFLAGS
- lt_save_LD=$LD
- lt_save_GCC=$GCC
- GCC=$GXX
-@@ -5504,6 +5836,7 @@
- fi
- test -z "${LDCXX+set}" || LD=$LDCXX
- CC=${CXX-"c++"}
-+ CFLAGS=$CXXFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-@@ -5525,8 +5858,8 @@
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ int
+@@ -9491,22 +10011,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-@@ -5667,7 +6000,7 @@
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
- # executable.
-- _LT_SYS_MODULE_PATH_AIX
-+ _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -5679,7 +6012,7 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- _LT_SYS_MODULE_PATH_AIX
-+ _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
-@@ -5721,29 +6054,75 @@
- ;;
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -9518,7 +10045,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
- cygwin* | mingw* | pw32* | cegcc*)
-- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-- # as there is no search path for DLLs.
-- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-- _LT_TAGVAR(always_export_symbols, $1)=no
-- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
--
-- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-- else
-- _LT_TAGVAR(ld_shlibs, $1)=no
-- fi
-- ;;
-+ case $GXX,$cc_basename in
-+ ,cl* | no,cl*)
-+ # Native MSVC
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_TAGVAR(always_export_symbols, $1)=yes
-+ _LT_TAGVAR(file_list_spec, $1)='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-+ # Don't use ranlib
-+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
-+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ func_to_tool_file "$lt_outputfile"~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # g++
-+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
-+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-+ _LT_TAGVAR(always_export_symbols, $1)=no
-+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ int
+@@ -9531,22 +10064,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
+
-+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ _LT_TAGVAR(ld_shlibs, $1)=no
-+ fi
-+ ;;
-+ esac
-+ ;;
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
-@@ -5818,7 +6197,7 @@
- ;;
- *)
- if test "$GXX" = yes; then
-- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
-@@ -5889,10 +6268,10 @@
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
-@@ -5933,9 +6312,9 @@
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
- fi
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
-@@ -6005,20 +6384,20 @@
- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- *) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-@@ -6213,7 +6592,7 @@
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- *)
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- esac
-
-@@ -6259,7 +6638,7 @@
-
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-@@ -6300,9 +6679,9 @@
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
-@@ -6431,6 +6810,7 @@
- fi # test -n "$compiler"
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -9591,20 +10131,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- hardcode_libdir_flag_spec=' '
+- allow_undefined_flag=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- old_archive_from_new_cmds='true'
+- # FIXME: Should let the user specify the lib program.
+- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
+- enable_shared_with_static_runtimes=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
+ ;;
- CC=$lt_save_CC
-+ CFLAGS=$lt_save_CFLAGS
- LDCXX=$LD
- LD=$lt_save_LD
- GCC=$lt_save_GCC
-@@ -6445,6 +6825,29 @@
- ])# _LT_LANG_CXX_CONFIG
+ darwin* | rhapsody*)
+@@ -9665,7 +10248,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+@@ -9673,7 +10256,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+# _LT_FUNC_STRIPNAME_CNF
-+# ----------------------
-+# func_stripname_cnf prefix suffix name
-+# strip PREFIX and SUFFIX off of NAME.
-+# PREFIX and SUFFIX must not contain globbing or regex special
-+# characters, hashes, percent signs, but SUFFIX may contain a leading
-+# dot (in which case that matches only a dot).
-+#
-+# This function is identical to the (non-XSI) version of func_stripname,
-+# except this one can be used by m4 code that may be executed by configure,
-+# rather than the libtool script.
-+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-+AC_REQUIRE([_LT_DECL_SED])
-+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-+func_stripname_cnf ()
-+{
-+ case ${2} in
-+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-+ esac
-+} # func_stripname_cnf
-+])# _LT_FUNC_STRIPNAME_CNF
-+
- # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
- # ---------------------------------
- # Figure out "hidden" library dependencies from verbose
-@@ -6453,6 +6856,7 @@
- # objects, libraries and library flags.
- m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
- # Dependencies to place before and after the object being linked:
- _LT_TAGVAR(predep_objects, $1)=
- _LT_TAGVAR(postdep_objects, $1)=
-@@ -6503,6 +6907,13 @@
- };
- _LT_EOF
- ])
-+
-+_lt_libdeps_save_CFLAGS=$CFLAGS
-+case "$CC $CFLAGS " in #(
-+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-+esac
-+
- dnl Parse the compiler output and extract the necessary
- dnl objects, libraries and library flags.
- if AC_TRY_EVAL(ac_compile); then
-@@ -6514,7 +6925,7 @@
- pre_test_object_deps_done=no
+ hpux9*)
+ if test "$GCC" = yes; then
+- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -9689,7 +10272,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- for p in `eval "$output_verbose_link_cmd"`; do
-- case $p in
-+ case ${prev}${p} in
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -9713,10 +10296,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -9795,23 +10378,36 @@ fi
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
-@@ -6523,13 +6934,22 @@
- test $p = "-R"; then
- prev=$p
- continue
-- else
-- prev=
- fi
-
-+ # Expand the sysroot to ease extracting the directories later.
-+ if test -z "$prev"; then
-+ case $p in
-+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
-+ esac
-+ fi
-+ case $p in
-+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
-+ esac
- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-+ case ${prev} in
-+ -L | -R)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
-@@ -6549,8 +6969,10 @@
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
-+ prev=
- ;;
-
-+ *.lto.$objext) ;; # Ignore GCC LTO objects
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
-@@ -6586,6 +7008,7 @@
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if test "${lt_cv_irix_exported_symbol+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-int foo(void) {}
++int foo (void) { return 0; }
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+-
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS="$save_LDFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -9896,7 +10492,7 @@ rm -f core conftest.err conftest.$ac_objext \
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+@@ -9915,9 +10511,9 @@ rm -f core conftest.err conftest.$ac_objext \
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -10493,8 +11089,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
- $RM -f confest.$objext
-+CFLAGS=$_lt_libdeps_save_CFLAGS
-
- # PORTME: override above test on systems where it is broken
- m4_if([$1], [CXX],
-@@ -6622,7 +7045,7 @@
-
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
-@@ -6735,7 +7158,9 @@
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
-+ lt_save_CFLAGS=$CFLAGS
- CC=${F77-"f77"}
-+ CFLAGS=$FFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-@@ -6789,6 +7214,7 @@
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -10527,13 +11124,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
-+ CFLAGS="$lt_save_CFLAGS"
- fi # test "$_lt_disable_F77" != yes
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -10625,7 +11280,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
- AC_LANG_POP
-@@ -6865,7 +7291,9 @@
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
-+ lt_save_CFLAGS=$CFLAGS
- CC=${FC-"f95"}
-+ CFLAGS=$FCFLAGS
- compiler=$CC
- GCC=$ac_cv_fc_compiler_gnu
+@@ -11465,10 +12120,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
-@@ -6921,7 +7349,8 @@
- fi # test -n "$compiler"
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -11571,10 +12226,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
- GCC=$lt_save_GCC
-- CC="$lt_save_CC"
-+ CC=$lt_save_CC
-+ CFLAGS=$lt_save_CFLAGS
- fi # test "$_lt_disable_FC" != yes
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -15163,7 +15818,7 @@ SHARED_LDFLAGS=
+ if test "$enable_shared" = "yes"; then
+ x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
+ if test -n "$x"; then
+- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
+ fi
- AC_LANG_POP
-@@ -6958,10 +7387,12 @@
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
--lt_save_CC="$CC"
-+lt_save_CC=$CC
-+lt_save_CFLAGS=$CFLAGS
- lt_save_GCC=$GCC
- GCC=yes
- CC=${GCJ-"gcj"}
-+CFLAGS=$GCJFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_TAGVAR(LD, $1)="$LD"
-@@ -6992,7 +7423,8 @@
- AC_LANG_RESTORE
+ # More hacks to build DLLs on Windows.
+@@ -16780,13 +17435,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+ lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+ lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+ lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+ reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+ reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+ OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+ deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+ file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+ AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+ AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+ STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+ RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+ old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+@@ -16801,14 +17463,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
+ lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+ objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+ MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+ lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+ need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+ DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+ NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+ LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+@@ -16841,12 +17506,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
+ hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+ inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+ link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
+ always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+ export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+ exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+ include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+ prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+ file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+ variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+ need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+@@ -16901,8 +17566,13 @@ reload_flag \
+ OBJDUMP \
+ deplibs_check_method \
+ file_magic_cmd \
++file_magic_glob \
++want_nocaseglob \
++DLLTOOL \
++sharedlib_from_linklib_cmd \
+ AR \
+ AR_FLAGS \
++archiver_list_spec \
+ STRIP \
+ RANLIB \
+ CC \
+@@ -16912,12 +17582,14 @@ lt_cv_sys_global_symbol_pipe \
+ lt_cv_sys_global_symbol_to_cdecl \
+ lt_cv_sys_global_symbol_to_c_name_address \
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
++nm_file_list_spec \
+ lt_prog_compiler_no_builtin_flag \
+-lt_prog_compiler_wl \
+ lt_prog_compiler_pic \
++lt_prog_compiler_wl \
+ lt_prog_compiler_static \
+ lt_cv_prog_compiler_c_o \
+ need_locks \
++MANIFEST_TOOL \
+ DSYMUTIL \
+ NMEDIT \
+ LIPO \
+@@ -16933,7 +17605,6 @@ no_undefined_flag \
+ hardcode_libdir_flag_spec \
+ hardcode_libdir_flag_spec_ld \
+ hardcode_libdir_separator \
+-fix_srcfile_path \
+ exclude_expsyms \
+ include_expsyms \
+ file_list_spec \
+@@ -16969,6 +17640,7 @@ module_cmds \
+ module_expsym_cmds \
+ export_symbols_cmds \
+ prelink_cmds \
++postlink_cmds \
+ postinstall_cmds \
+ postuninstall_cmds \
+ finish_cmds \
+@@ -17748,7 +18420,8 @@ $as_echo X"$file" |
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -17851,19 +18524,42 @@ SP2NL=$lt_lt_SP2NL
+ # turn newlines into spaces.
+ NL2SP=$lt_lt_NL2SP
- GCC=$lt_save_GCC
--CC="$lt_save_CC"
-+CC=$lt_save_CC
-+CFLAGS=$lt_save_CFLAGS
- ])# _LT_LANG_GCJ_CONFIG
++# convert \$build file names to \$host format.
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++
++# convert \$build files to toolchain format.
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++
+ # An object symbol dumper.
+ OBJDUMP=$lt_OBJDUMP
+ # Method to check whether dependent libraries are shared objects.
+ deplibs_check_method=$lt_deplibs_check_method
-@@ -7027,9 +7459,11 @@
+-# Command to use when deplibs_check_method == "file_magic".
++# Command to use when deplibs_check_method = "file_magic".
+ file_magic_cmd=$lt_file_magic_cmd
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
-+lt_save_CFLAGS=$CFLAGS
- lt_save_GCC=$GCC
- GCC=
- CC=${RC-"windres"}
-+CFLAGS=
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-@@ -7042,7 +7476,8 @@
++# How to find potential files when deplibs_check_method = "file_magic".
++file_magic_glob=$lt_file_magic_glob
++
++# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
++want_nocaseglob=$lt_want_nocaseglob
++
++# DLL creation program.
++DLLTOOL=$lt_DLLTOOL
++
++# Command to associate shared and link libraries.
++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
++
+ # The archiver.
+ AR=$lt_AR
++
++# Flags to create an archive.
+ AR_FLAGS=$lt_AR_FLAGS
- GCC=$lt_save_GCC
- AC_LANG_RESTORE
--CC="$lt_save_CC"
-+CC=$lt_save_CC
-+CFLAGS=$lt_save_CFLAGS
- ])# _LT_LANG_RC_CONFIG
++# How to feed a file listing to the archiver.
++archiver_list_spec=$lt_archiver_list_spec
++
+ # A symbol stripping program.
+ STRIP=$lt_STRIP
+@@ -17893,6 +18589,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+ # Transform the output of nm in a C name address pair when lib prefix is needed.
+ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-@@ -7101,6 +7536,15 @@
- AC_SUBST([OBJDUMP])
- ])
++# Specify filename containing input files for \$NM.
++nm_file_list_spec=$lt_nm_file_list_spec
++
++# The root where to search for dependent libraries,and in which our libraries should be installed.
++lt_sysroot=$lt_sysroot
++
+ # The name of the directory that contains temporary libtool files.
+ objdir=$objdir
-+# _LT_DECL_DLLTOOL
-+# ----------------
-+# Ensure DLLTOOL variable is set.
-+m4_defun([_LT_DECL_DLLTOOL],
-+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-+AC_SUBST([DLLTOOL])
-+])
+@@ -17902,6 +18604,9 @@ MAGIC_CMD=$MAGIC_CMD
+ # Must we lock files when doing compilation?
+ need_locks=$lt_need_locks
- # _LT_DECL_SED
- # ------------
-@@ -7194,8 +7638,8 @@
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-- = c,a/b,, \
-+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-+ = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-@@ -7234,206 +7678,162 @@
- ])# _LT_CHECK_SHELL_FEATURES
++# Manifest tool.
++MANIFEST_TOOL=$lt_MANIFEST_TOOL
++
+ # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+ DSYMUTIL=$lt_DSYMUTIL
+@@ -18016,12 +18721,12 @@ with_gcc=$GCC
+ # Compiler flag to turn off builtin functions.
+ no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
--# _LT_PROG_XSI_SHELLFNS
--# ---------------------
--# Bourne and XSI compatible variants of some useful shell functions.
--m4_defun([_LT_PROG_XSI_SHELLFNS],
--[case $xsi_shell in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
+-# How to pass a linker flag through the compiler.
+-wl=$lt_lt_prog_compiler_wl
-
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
--}
+ # Additional compiler flags for building library objects.
+ pic_flag=$lt_lt_prog_compiler_pic
+
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
+ # Compiler flag to prevent dynamic linking.
+ link_static_flag=$lt_lt_prog_compiler_static
+
+@@ -18108,9 +18813,6 @@ inherit_rpath=$inherit_rpath
+ # Whether libtool must link a program against all its dependency libraries.
+ link_all_deplibs=$link_all_deplibs
+
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path=$lt_fix_srcfile_path
-
--# func_basename file
--func_basename ()
--{
-- func_basename_result="${1##*/}"
+ # Set to "yes" if exported symbols are required.
+ always_export_symbols=$always_export_symbols
+
+@@ -18126,6 +18828,9 @@ include_expsyms=$lt_include_expsyms
+ # Commands necessary for linking programs (against libraries) with templates.
+ prelink_cmds=$lt_prelink_cmds
+
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds
++
+ # Specify filename containing input files.
+ file_list_spec=$lt_file_list_spec
+
+@@ -18158,210 +18863,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
@@ -1559,7 +1650,7 @@ Index: binutils-2.24/libtool.m4
-# func_arith arithmetic-term...
-func_arith ()
-{
-- func_arith_result=$(( $[*] ))
+- func_arith_result=$(( $* ))
-}
-
-# func_len string
@@ -1593,26 +1684,8 @@ Index: binutils-2.24/libtool.m4
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-}
-+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-+# ------------------------------------------------------
-+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-+m4_defun([_LT_PROG_FUNCTION_REPLACE],
-+[dnl {
-+sed -e '/^$1 ()$/,/^} # $1 /c\
-+$1 ()\
-+{\
-+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+])
-
--dnl func_dirname_and_basename
--dnl A portable version of this function is already defined in general.m4sh
--dnl so there is no need for it here.
-
+-
+-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
@@ -1626,114 +1699,46 @@ Index: binutils-2.24/libtool.m4
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-}
-+# _LT_PROG_REPLACE_SHELLFNS
-+# -------------------------
-+# Replace existing portable implementations of several shell functions with
-+# equivalent extended shell implementations where those features are available..
-+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-+[if test x"$xsi_shell" = xyes; then
-+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
-+ case ${1} in
-+ */*) func_dirname_result="${1%/*}${2}" ;;
-+ * ) func_dirname_result="${3}" ;;
-+ esac])
-+
-+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
-+ func_basename_result="${1##*/}"])
-+
-+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
-+ case ${1} in
-+ */*) func_dirname_result="${1%/*}${2}" ;;
-+ * ) func_dirname_result="${3}" ;;
-+ esac
-+ func_basename_result="${1##*/}"])
-
+-
-# sed scripts:
--my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
--my_sed_long_arg='1s/^-[[^=]]*=//'
-+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
-+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-+ # positional parameters, so assign one to ordinary parameter first.
-+ func_stripname_result=${3}
-+ func_stripname_result=${func_stripname_result#"${1}"}
-+ func_stripname_result=${func_stripname_result%"${2}"}])
-+
-+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
-+ func_split_long_opt_name=${1%%=*}
-+ func_split_long_opt_arg=${1#*=}])
-+
-+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
-+ func_split_short_opt_arg=${1#??}
-+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-+
-+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
-+ case ${1} in
-+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-+ *) func_lo2o_result=${1} ;;
-+ esac])
-
+-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[^=]*=//'
+-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
-}
-+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
+-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-}
-+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
+-
-# func_xform libobj-or-source
-func_xform ()
-{
-- func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'`
+- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-}
-+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-+fi
-
+-
-# func_arith arithmetic-term...
-func_arith ()
-{
-- func_arith_result=`expr "$[@]"`
+- func_arith_result=`expr "$@"`
-}
-+if test x"$lt_shell_append" = xyes; then
-+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
+-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
-+ func_quote_for_eval "${2}"
-+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-+
-+ # Save a `func_append' function call where possible by direct use of '+='
-+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+else
-+ # Save a `func_append' function call even when '+=' is not available
-+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+fi
-
+-
-_LT_EOF
-esac
-+if test x"$_lt_function_replace_fail" = x":"; then
-+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-+fi
-+])
-
+-
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
@@ -1742,33 +1747,10 @@ Index: binutils-2.24/libtool.m4
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-- eval "$[1]+=\$[2]"
+- eval "$1+=\$2"
-}
-_LT_EOF
-+# _LT_PATH_CONVERSION_FUNCTIONS
-+# -----------------------------
-+# Determine which file name conversion functions should be used by
-+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
-+# for certain cross-compile configurations and native mingw.
-+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-+AC_MSG_CHECKING([how to convert $build file names to $host format])
-+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-+[case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-+ ;;
-+ esac
- ;;
+- ;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
@@ -1776,5342 +1758,2106 @@ Index: binutils-2.24/libtool.m4
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-- eval "$[1]=\$$[1]\$[2]"
+- eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-+ *-*-cygwin* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-+ ;;
-+ esac
- ;;
+- ;;
- esac
-+ * ) # unhandled hosts (and "normal" native builds)
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+esac
-+])
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
-+ [0], [convert $build file names to $host format])dnl
+-
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
-+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-+[#assume ordinary cross tools, or native build.
-+lt_cv_to_tool_file_cmd=func_convert_file_noop
-+case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ esac
-+ ;;
-+esac
- ])
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
-+ [0], [convert $build files to toolchain format])dnl
-+])# _LT_PATH_CONVERSION_FUNCTIONS
-Index: binutils-2.24/ltmain.sh
-===================================================================
---- binutils-2.24.orig/ltmain.sh 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/ltmain.sh 2013-12-15 11:10:23.867118697 -0800
-@@ -1,10 +1,9 @@
--# Generated from ltmain.m4sh.
-
--# libtool (GNU libtool 1.3134 2009-11-29) 2.2.7a
-+# libtool (GNU libtool) 2.4
- # Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
--# 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
- # This is free software; see the source for copying conditions. There is NO
- # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-@@ -38,7 +37,6 @@
- # -n, --dry-run display commands without modifying any files
- # --features display basic configuration information and exit
- # --mode=MODE use operation mode MODE
--# --no-finish let install mode avoid finish commands
- # --preserve-dup-deps don't remove duplicate dependency libraries
- # --quiet, --silent don't print informational messages
- # --no-quiet, --no-silent
-@@ -71,17 +69,19 @@
- # compiler: $LTCC
- # compiler flags: $LTCFLAGS
- # linker: $LD (gnu? $with_gnu_ld)
--# $progname: (GNU libtool 1.3134 2009-11-29) 2.2.7a
-+# $progname: (GNU libtool) 2.4
- # automake: $automake_version
- # autoconf: $autoconf_version
- #
- # Report bugs to <bug-libtool at gnu.org>.
-+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-+# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
- PROGRAM=libtool
- PACKAGE=libtool
--VERSION=2.2.7a
--TIMESTAMP=" 1.3134 2009-11-29"
--package_revision=1.3134
-+VERSION=2.4
-+TIMESTAMP=""
-+package_revision=1.3293
-
- # Be Bourne compatible
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-@@ -106,9 +106,6 @@
- }
-
- # NLS nuisances: We save the old values to restore during execute mode.
--# Only set LANG and LC_ALL to C if already set.
--# These must not be set unconditionally because not all systems understand
--# e.g. LANG=C (notably SCO).
- lt_user_locale=
- lt_safe_locale=
- for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-@@ -121,15 +118,13 @@
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
- fi"
- done
-+LC_ALL=C
-+LANGUAGE=C
-+export LANGUAGE LC_ALL
-
- $lt_unset CDPATH
-
-
--
--
--
--
--
- # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
- # is ksh but when the shell is invoked as "sh" and the current value of
- # the _XPG environment variable is not equal to 1 (one), the special
-@@ -140,7 +135,7 @@
-
-
- : ${CP="cp -f"}
--: ${ECHO=$as_echo}
-+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
- : ${EGREP="/bin/grep -E"}
- : ${FGREP="/bin/grep -F"}
- : ${GREP="/bin/grep"}
-@@ -149,7 +144,7 @@
- : ${MKDIR="mkdir"}
- : ${MV="mv -f"}
- : ${RM="rm -f"}
--: ${SED="/mount/endor/wildenhu/local-x86_64/bin/sed"}
-+: ${SED="/bin/sed"}
- : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
- : ${Xsed="$SED -e 1s/^X//"}
-
-@@ -169,6 +164,27 @@
- dirname="s,/[^/]*$,,"
- basename="s,^.*/,,"
-
-+# func_dirname file append nondir_replacement
-+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-+# otherwise set result to NONDIR_REPLACEMENT.
-+func_dirname ()
-+{
-+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-+ if test "X$func_dirname_result" = "X${1}"; then
-+ func_dirname_result="${3}"
-+ else
-+ func_dirname_result="$func_dirname_result${2}"
-+ fi
-+} # func_dirname may be replaced by extended shell implementation
++ if test x"$xsi_shell" = xyes; then
++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
++func_dirname ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+# func_basename file
-+func_basename ()
-+{
-+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-+} # func_basename may be replaced by extended shell implementation
++ sed -e '/^func_basename ()$/,/^} # func_basename /c\
++func_basename ()\
++{\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
+
- # func_dirname_and_basename file append nondir_replacement
- # perform func_basename and func_dirname in a single function
- # call:
-@@ -183,17 +199,31 @@
- # those functions but instead duplicate the functionality here.
- func_dirname_and_basename ()
- {
-- # Extract subdirectory from the argument.
-- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-- if test "X$func_dirname_result" = "X${1}"; then
-- func_dirname_result="${3}"
-- else
-- func_dirname_result="$func_dirname_result${2}"
-- fi
-- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
--}
-+ # Extract subdirectory from the argument.
-+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-+ if test "X$func_dirname_result" = "X${1}"; then
-+ func_dirname_result="${3}"
-+ else
-+ func_dirname_result="$func_dirname_result${2}"
-+ fi
-+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-+} # func_dirname_and_basename may be replaced by extended shell implementation
++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
++func_dirname_and_basename ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+# func_stripname prefix suffix name
-+# strip PREFIX and SUFFIX off of NAME.
-+# PREFIX and SUFFIX must not contain globbing or regex special
-+# characters, hashes, percent signs, but SUFFIX may contain a leading
-+# dot (in which case that matches only a dot).
-+# func_strip_suffix prefix name
-+func_stripname ()
-+{
-+ case ${2} in
-+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-+ esac
-+} # func_stripname may be replaced by extended shell implementation
-
--# Generated shell functions inserted here.
-
- # These SED scripts presuppose an absolute path with a trailing slash.
- pathcar='s,^/\([^/]*\).*$,\1,'
-@@ -376,6 +406,15 @@
- # Same as above, but do not quote variable references.
- double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-+# Sed substitution that turns a string into a regex matching for the
-+# string literally.
-+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
++func_stripname ()\
++{\
++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
++\ # positional parameters, so assign one to ordinary parameter first.\
++\ func_stripname_result=${3}\
++\ func_stripname_result=${func_stripname_result#"${1}"}\
++\ func_stripname_result=${func_stripname_result%"${2}"}\
++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# Sed substitution that converts a w32 file name or path
-+# which contains forward slashes, into one that contains
-+# (escaped) backslashes. A very naive implementation.
-+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
- # Re-`\' parameter expansions in output of double_quote_subst that were
- # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
- # in input to double_quote_subst, that '$' was protected from expansion.
-@@ -404,7 +443,7 @@
- # name if it has been set yet.
- func_echo ()
- {
-- $ECHO "$progname${mode+: }$mode: $*"
-+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
- }
-
- # func_verbose arg...
-@@ -430,14 +469,14 @@
- # Echo program name prefixed message to standard error.
- func_error ()
- {
-- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
-+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
- }
-
- # func_warning arg...
- # Echo program name prefixed warning message to standard error.
- func_warning ()
- {
-- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
-+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
- # bash bug again:
- :
-@@ -656,19 +695,35 @@
- fi
- }
-
--
--
-+# func_tr_sh
-+# Turn $1 into a string suitable for a shell variable name.
-+# Result is stored in $func_tr_sh_result. All characters
-+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-+# if $1 begins with a digit, a '_' is prepended as well.
-+func_tr_sh ()
-+{
-+ case $1 in
-+ [0-9]* | *[!a-zA-Z0-9_]*)
-+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-+ ;;
-+ * )
-+ func_tr_sh_result=$1
-+ ;;
-+ esac
-+}
-
-
- # func_version
- # Echo version message to standard output and exit.
- func_version ()
- {
-+ $opt_debug
++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
++func_split_long_opt ()\
++{\
++\ func_split_long_opt_name=${1%%=*}\
++\ func_split_long_opt_arg=${1#*=}\
++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
-- s/\n# //
-+ s/\n# / /
- b more
- }
- :go
-@@ -685,7 +740,9 @@
- # Echo short help message to standard output and exit.
- func_usage ()
- {
-- $SED -n '/^# Usage:/,/^# *-h/ {
-+ $opt_debug
-+
-+ $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
-@@ -701,7 +758,10 @@
- # unless 'noexit' is passed as argument.
- func_help ()
- {
-+ $opt_debug
+
- $SED -n '/^# Usage:/,/# Report bugs to/ {
-+ :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
-@@ -714,7 +774,11 @@
- s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
- p
-- }' < "$progpath"
-+ d
-+ }
-+ /^# .* home page:/b print
-+ /^# General help using/b print
-+ ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
-@@ -726,12 +790,39 @@
- # exit_cmd.
- func_missing_arg ()
- {
-- func_error "missing argument for $1"
-+ $opt_debug
++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
++func_split_short_opt ()\
++{\
++\ func_split_short_opt_arg=${1#??}\
++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+ func_error "missing argument for $1."
- exit_cmd=exit
- }
-
--exit_cmd=:
-
-+# func_split_short_opt shortopt
-+# Set func_split_short_opt_name and func_split_short_opt_arg shell
-+# variables after splitting SHORTOPT after the 2nd character.
-+func_split_short_opt ()
-+{
-+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
-+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-+} # func_split_short_opt may be replaced by extended shell implementation
++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
++func_lo2o ()\
++{\
++\ case ${1} in\
++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
++\ *) func_lo2o_result=${1} ;;\
++\ esac\
++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+# func_split_long_opt longopt
-+# Set func_split_long_opt_name and func_split_long_opt_arg shell
-+# variables after splitting LONGOPT at the `=' sign.
-+func_split_long_opt ()
-+{
-+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-+ my_sed_long_arg='1s/^--[^=]*=//'
++ sed -e '/^func_xform ()$/,/^} # func_xform /c\
++func_xform ()\
++{\
++ func_xform_result=${1%.*}.lo\
++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-+} # func_split_long_opt may be replaced by extended shell implementation
+
-+exit_cmd=:
-
-
-
-@@ -741,26 +832,64 @@
- magic_exe="%%%MAGIC EXE variable%%%"
-
- # Global variables.
--# $mode is unset
- nonopt=
--execute_dlfiles=
- preserve_args=
- lo2o="s/\\.lo\$/.${objext}/"
- o2lo="s/\\.${objext}\$/.lo/"
- extracted_archives=
- extracted_serial=0
-
--opt_dry_run=false
--opt_finish=:
--opt_duplicate_deps=false
--opt_silent=false
--opt_debug=:
--
- # If this variable is set in any of the actions, the command in it
- # will be execed at the end. This prevents here-documents from being
- # left over by shells.
- exec_cmd=
-
-+# func_append var value
-+# Append VALUE to the end of shell variable VAR.
-+func_append ()
-+{
-+ eval "${1}=\$${1}\${2}"
-+} # func_append may be replaced by extended shell implementation
++ sed -e '/^func_arith ()$/,/^} # func_arith /c\
++func_arith ()\
++{\
++ func_arith_result=$(( $* ))\
++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# func_append_quoted var value
-+# Quote VALUE and append to the end of shell variable VAR, separated
-+# by a space.
-+func_append_quoted ()
-+{
-+ func_quote_for_eval "${2}"
-+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-+} # func_append_quoted may be replaced by extended shell implementation
+
++ sed -e '/^func_len ()$/,/^} # func_len /c\
++func_len ()\
++{\
++ func_len_result=${#1}\
++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# func_arith arithmetic-term...
-+func_arith ()
-+{
-+ func_arith_result=`expr "${@}"`
-+} # func_arith may be replaced by extended shell implementation
++fi
+
++if test x"$lt_shell_append" = xyes; then
++ sed -e '/^func_append ()$/,/^} # func_append /c\
++func_append ()\
++{\
++ eval "${1}+=\\${2}"\
++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# func_len string
-+# STRING may not start with a hyphen.
-+func_len ()
-+{
-+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-+} # func_len may be replaced by extended shell implementation
+
++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
++func_append_quoted ()\
++{\
++\ func_quote_for_eval "${2}"\
++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# func_lo2o object
-+func_lo2o ()
-+{
-+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-+} # func_lo2o may be replaced by extended shell implementation
+
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
+
-+# func_xform libobj-or-source
-+func_xform ()
-+{
-+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-+} # func_xform may be replaced by extended shell implementation
++if test x"$_lt_function_replace_fail" = x":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
++fi
+
+
- # func_fatal_configuration arg...
- # Echo program name prefixed message to standard error, followed by
- # a configuration failure hint, and exit.
-@@ -850,130 +979,204 @@
- esac
- }
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
--# Parse options once, thoroughly. This comes as soon as possible in
--# the script to make things like `libtool --version' happen quickly.
-+# func_check_version_match
-+# Ensure that we are using m4 macros, and libtool script from the same
-+# release of libtool.
-+func_check_version_match ()
- {
-+ if test "$package_revision" != "$macro_revision"; then
-+ if test "$VERSION" != "$macro_version"; then
-+ if test -z "$macro_version"; then
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-+$progname: definition of this LT_INIT comes from an older release.
-+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-+$progname: and run autoconf again.
-+_LT_EOF
-+ else
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-+$progname: and run autoconf again.
-+_LT_EOF
-+ fi
-+ else
-+ cat >&2 <<_LT_EOF
-+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-+$progname: of $PACKAGE $VERSION and run autoconf again.
-+_LT_EOF
-+ fi
-+
-+ exit $EXIT_MISMATCH
-+ fi
-+}
-+
-+
-+# Shorthand for --mode=foo, only valid as the first argument
-+case $1 in
-+clean|clea|cle|cl)
-+ shift; set dummy --mode clean ${1+"$@"}; shift
-+ ;;
-+compile|compil|compi|comp|com|co|c)
-+ shift; set dummy --mode compile ${1+"$@"}; shift
-+ ;;
-+execute|execut|execu|exec|exe|ex|e)
-+ shift; set dummy --mode execute ${1+"$@"}; shift
-+ ;;
-+finish|finis|fini|fin|fi|f)
-+ shift; set dummy --mode finish ${1+"$@"}; shift
-+ ;;
-+install|instal|insta|inst|ins|in|i)
-+ shift; set dummy --mode install ${1+"$@"}; shift
-+ ;;
-+link|lin|li|l)
-+ shift; set dummy --mode link ${1+"$@"}; shift
-+ ;;
-+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-+ shift; set dummy --mode uninstall ${1+"$@"}; shift
-+ ;;
-+esac
+diff --git a/bfd/configure.ac b/bfd/configure.ac
+index ba98e39..88063cf 100644
+--- a/bfd/configure.ac
++++ b/bfd/configure.ac
+@@ -564,7 +564,7 @@ changequote(,)dnl
+ x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
+ changequote([,])dnl
+ if test -n "$x"; then
+- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
+ fi
-- # Shorthand for --mode=foo, only valid as the first argument
-- case $1 in
-- clean|clea|cle|cl)
-- shift; set dummy --mode clean ${1+"$@"}; shift
-- ;;
-- compile|compil|compi|comp|com|co|c)
-- shift; set dummy --mode compile ${1+"$@"}; shift
-- ;;
-- execute|execut|execu|exec|exe|ex|e)
-- shift; set dummy --mode execute ${1+"$@"}; shift
-- ;;
-- finish|finis|fini|fin|fi|f)
-- shift; set dummy --mode finish ${1+"$@"}; shift
-- ;;
-- install|instal|insta|inst|ins|in|i)
-- shift; set dummy --mode install ${1+"$@"}; shift
-- ;;
-- link|lin|li|l)
-- shift; set dummy --mode link ${1+"$@"}; shift
-- ;;
-- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-- shift; set dummy --mode uninstall ${1+"$@"}; shift
-- ;;
-- esac
+ # More hacks to build DLLs on Windows.
+diff --git a/binutils/configure b/binutils/configure
+index be4b81c..6606a5f 100755
+--- a/binutils/configure
++++ b/binutils/configure
+@@ -655,8 +655,11 @@ OTOOL
+ LIPO
+ NMEDIT
+ DSYMUTIL
++MANIFEST_TOOL
+ RANLIB
++ac_ct_AR
+ AR
++DLLTOOL
+ OBJDUMP
+ LN_S
+ NM
+@@ -767,6 +770,7 @@ enable_static
+ with_pic
+ enable_fast_install
+ with_gnu_ld
++with_libtool_sysroot
+ enable_libtool_lock
+ enable_plugins
+ enable_largefile
+@@ -1439,6 +1443,8 @@ Optional Packages:
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).
+ --with-zlib include zlib support (auto/yes/no) default=auto
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+@@ -5153,8 +5159,8 @@ esac
-- # Parse non-mode specific arguments:
-- while test "$#" -gt 0; do
+
+
+-macro_version='2.2.7a'
+-macro_revision='1.3134'
++macro_version='2.4'
++macro_revision='1.3293'
+
+
+
+@@ -5194,7 +5200,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+ $as_echo_n "checking how to print strings... " >&6; }
+ # Test print first, because it will be a builtin if present.
+-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+ elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+@@ -5880,8 +5886,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -5930,6 +5936,80 @@ esac
+
+
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
++$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
++if test "${lt_cv_to_host_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
+
-+# Option defaults:
-+opt_debug=:
-+opt_dry_run=false
-+opt_config=false
-+opt_preserve_dup_deps=false
-+opt_features=false
-+opt_finish=false
-+opt_help=false
-+opt_help_all=false
-+opt_silent=:
-+opt_verbose=:
-+opt_silent=false
-+opt_verbose=false
++fi
+
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
++$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
-+# Parse options once, thoroughly. This comes as soon as possible in the
-+# script to make things like `--version' happen as quickly as we can.
-+{
-+ # this just eases exit handling
-+ while test $# -gt 0; do
- opt="$1"
- shift
--
- case $opt in
-- --config) func_config ;;
--
-- --debug) preserve_args="$preserve_args $opt"
-+ --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
-- opt_debug='set -x'
- $opt_debug
- ;;
--
-- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
-- execute_dlfiles="$execute_dlfiles $1"
-- shift
-+ --dry-run|--dryrun|-n)
-+ opt_dry_run=:
- ;;
--
-- --dry-run | -n) opt_dry_run=: ;;
-- --features) func_features ;;
-- --finish) mode="finish" ;;
-- --no-finish) opt_finish=false ;;
--
-- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
-- case $1 in
-- # Valid mode arguments:
-- clean) ;;
-- compile) ;;
-- execute) ;;
-- finish) ;;
-- install) ;;
-- link) ;;
-- relink) ;;
-- uninstall) ;;
--
-- # Catch anything else as an error
-- *) func_error "invalid argument for $opt"
-- exit_cmd=exit
-- break
-- ;;
-- esac
--
-- mode="$1"
-+ --config)
-+ opt_config=:
-+func_config
-+ ;;
-+ --dlopen|-dlopen)
-+ optarg="$1"
-+ opt_dlopen="${opt_dlopen+$opt_dlopen
-+}$optarg"
- shift
- ;;
--
- --preserve-dup-deps)
-- opt_duplicate_deps=: ;;
--
-- --quiet|--silent) preserve_args="$preserve_args $opt"
-- opt_silent=:
-- opt_verbose=false
-+ opt_preserve_dup_deps=:
- ;;
--
-- --no-quiet|--no-silent)
-- preserve_args="$preserve_args $opt"
-- opt_silent=false
-+ --features)
-+ opt_features=:
-+func_features
- ;;
--
-- --verbose| -v) preserve_args="$preserve_args $opt"
-+ --finish)
-+ opt_finish=:
-+set dummy --mode finish ${1+"$@"}; shift
-+ ;;
-+ --help)
-+ opt_help=:
-+ ;;
-+ --help-all)
-+ opt_help_all=:
-+opt_help=': help-all'
-+ ;;
-+ --mode)
-+ test $# = 0 && func_missing_arg $opt && break
-+ optarg="$1"
-+ opt_mode="$optarg"
-+case $optarg in
-+ # Valid mode arguments:
-+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
-+ # Catch anything else as an error
-+ *) func_error "invalid argument for $opt"
-+ exit_cmd=exit
-+ break
-+ ;;
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
++if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ #assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
+esac
-+ shift
-+ ;;
-+ --no-silent|--no-quiet)
- opt_silent=false
-- opt_verbose=:
-+func_append preserve_args " $opt"
- ;;
--
-- --no-verbose) preserve_args="$preserve_args $opt"
-+ --no-verbose)
- opt_verbose=false
-+func_append preserve_args " $opt"
- ;;
--
-- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
-- preserve_args="$preserve_args $opt $1"
-- func_enable_tag "$1" # tagname is set here
-+ --silent|--quiet)
-+ opt_silent=:
-+func_append preserve_args " $opt"
-+ opt_verbose=false
-+ ;;
-+ --verbose|-v)
-+ opt_verbose=:
-+func_append preserve_args " $opt"
-+opt_silent=false
-+ ;;
-+ --tag)
-+ test $# = 0 && func_missing_arg $opt && break
-+ optarg="$1"
-+ opt_tag="$optarg"
-+func_append preserve_args " $opt $optarg"
-+func_enable_tag "$optarg"
- shift
- ;;
-
-+ -\?|-h) func_usage ;;
-+ --help) func_help ;;
-+ --version) func_version ;;
+
- # Separate optargs to long options:
-- -dlopen=*|--mode=*|--tag=*)
-- func_opt_split "$opt"
-- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-+ --*=*)
-+ func_split_long_opt "$opt"
-+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
-- -\?|-h) func_usage ;;
-- --help) opt_help=: ;;
-- --help-all) opt_help=': help-all' ;;
-- --version) func_version ;;
--
-- -*) func_fatal_help "unrecognized option \`$opt'" ;;
--
-- *) nonopt="$opt"
-- break
-+ # Separate non-argument short options:
-+ -\?*|-h*|-n*|-v*)
-+ func_split_short_opt "$opt"
-+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-+ shift
- ;;
++fi
+
-+ --) break ;;
-+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
-+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
-
-+ # Validate options:
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
++$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
-+ # save first non-option argument
-+ if test "$#" -gt 0; then
-+ nonopt="$opt"
-+ shift
-+ fi
+
-+ # preserve --debug
-+ test "$opt_debug" = : || func_append preserve_args " --debug"
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
-@@ -981,82 +1184,44 @@
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
-- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
-
-- # Having warned about all mis-specified options, bail out if
-- # anything was wrong.
-- $exit_cmd $EXIT_FAILURE
--}
-+ $opt_help || {
-+ # Sanity checks first:
-+ func_check_version_match
-
--# func_check_version_match
--# Ensure that we are using m4 macros, and libtool script from the same
--# release of libtool.
--func_check_version_match ()
--{
-- if test "$package_revision" != "$macro_revision"; then
-- if test "$VERSION" != "$macro_version"; then
-- if test -z "$macro_version"; then
-- cat >&2 <<_LT_EOF
--$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
--$progname: definition of this LT_INIT comes from an older release.
--$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
--$progname: and run autoconf again.
--_LT_EOF
-- else
-- cat >&2 <<_LT_EOF
--$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
--$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
--$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
--$progname: and run autoconf again.
--_LT_EOF
-- fi
-- else
-- cat >&2 <<_LT_EOF
--$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
--$progname: but the definition of this LT_INIT comes from revision $macro_revision.
--$progname: You should recreate aclocal.m4 with macros from revision $package_revision
--$progname: of $PACKAGE $VERSION and run autoconf again.
--_LT_EOF
-+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-+ func_fatal_configuration "not configured to build any kind of library"
- fi
-
-- exit $EXIT_MISMATCH
-- fi
--}
--
-+ # Darwin sucks
-+ eval std_shrext=\"$shrext_cmds\"
-
--## ----------- ##
--## Main. ##
--## ----------- ##
--
--$opt_help || {
-- # Sanity checks first:
-- func_check_version_match
--
-- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-- func_fatal_configuration "not configured to build any kind of library"
-- fi
-+ # Only execute mode is allowed to have -dlopen flags.
-+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-+ func_error "unrecognized option \`-dlopen'"
-+ $ECHO "$help" 1>&2
-+ exit $EXIT_FAILURE
++
++
++
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+ $as_echo_n "checking for $LD option to reload object files... " >&6; }
+ if test "${lt_cv_ld_reload_flag+set}" = set; then :
+@@ -5946,6 +6026,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
+ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -6114,7 +6199,8 @@ mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+@@ -6268,6 +6354,21 @@ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+ $as_echo "$lt_cv_deplibs_check_method" >&6; }
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -6283,9 +6384,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
-- test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-+ # Change the help message to a mode-specific one.
-+ generic_help="$help"
-+ help="Try \`$progname --help --mode=$opt_mode' for more information."
-+ }
-
-
-- # Darwin sucks
-- eval "std_shrext=\"$shrext_cmds\""
-+ # Bail if the options were screwed
-+ $exit_cmd $EXIT_FAILURE
-+}
-
-
-- # Only execute mode is allowed to have -dlopen flags.
-- if test -n "$execute_dlfiles" && test "$mode" != execute; then
-- func_error "unrecognized option \`-dlopen'"
-- $ECHO "$help" 1>&2
-- exit $EXIT_FAILURE
-- fi
-
-- # Change the help message to a mode-specific one.
-- generic_help="$help"
-- help="Try \`$progname --help --mode=$mode' for more information."
--}
-+## ----------- ##
-+## Main. ##
-+## ----------- ##
-
- # func_lalib_p file
- # True iff FILE is a libtool `.la' library or `.lo' object file.
-@@ -1121,12 +1286,9 @@
- # temporary ltwrapper_script.
- func_ltwrapper_scriptname ()
- {
-- func_ltwrapper_scriptname_result=""
-- if func_ltwrapper_executable_p "$1"; then
-- func_dirname_and_basename "$1" "" "."
-- func_stripname '' '.exe' "$func_basename_result"
-- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-- fi
-+ func_dirname_and_basename "$1" "" "."
-+ func_stripname '' '.exe' "$func_basename_result"
-+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
- }
-
- # func_ltwrapper_p file
-@@ -1149,7 +1311,7 @@
- save_ifs=$IFS; IFS='~'
- for cmd in $1; do
- IFS=$save_ifs
-- eval "cmd=\"$cmd\""
-+ eval cmd=\"$cmd\"
- func_show_eval "$cmd" "${2-:}"
- done
- IFS=$save_ifs
-@@ -1172,6 +1334,37 @@
- }
-
-
-+# func_resolve_sysroot PATH
-+# Replace a leading = in PATH with a sysroot. Store the result into
-+# func_resolve_sysroot_result
-+func_resolve_sysroot ()
-+{
-+ func_resolve_sysroot_result=$1
-+ case $func_resolve_sysroot_result in
-+ =*)
-+ func_stripname '=' '' "$func_resolve_sysroot_result"
-+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-+ ;;
-+ esac
-+}
-+
-+# func_replace_sysroot PATH
-+# If PATH begins with the sysroot, replace it with = and
-+# store the result into func_replace_sysroot_result.
-+func_replace_sysroot ()
-+{
-+ case "$lt_sysroot:$1" in
-+ ?*:"$lt_sysroot"*)
-+ func_stripname "$lt_sysroot" '' "$1"
-+ func_replace_sysroot_result="=$func_stripname_result"
-+ ;;
-+ *)
-+ # Including no sysroot.
-+ func_replace_sysroot_result=$1
-+ ;;
-+ esac
-+}
-+
- # func_infer_tag arg
- # Infer tagged configuration to use if any are available and
- # if one wasn't chosen via the "--tag" command line option.
-@@ -1184,8 +1377,7 @@
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
-- func_quote_for_eval "$arg"
-- CC_quoted="$CC_quoted $func_quote_for_eval_result"
-+ func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
-@@ -1204,8 +1396,7 @@
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
-- func_quote_for_eval "$arg"
-- CC_quoted="$CC_quoted $func_quote_for_eval_result"
-+ func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
-@@ -1274,6 +1465,486 @@
- }
- }
+
-+##################################################
-+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-+##################################################
+
-+# func_convert_core_file_wine_to_w32 ARG
-+# Helper function used by file name conversion functions when $build is *nix,
-+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-+# correctly configured wine environment available, with the winepath program
-+# in $build's $PATH.
-+#
-+# ARG is the $build file name to be converted to w32 format.
-+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-+# be empty on error (or when ARG is empty)
-+func_convert_core_file_wine_to_w32 ()
-+{
-+ $opt_debug
-+ func_convert_core_file_wine_to_w32_result="$1"
-+ if test -n "$1"; then
-+ # Unfortunately, winepath does not exit with a non-zero error code, so we
-+ # are forced to check the contents of stdout. On the other hand, if the
-+ # command is not found, the shell will set an exit code of 127 and print
-+ # *an error message* to stdout. So we must check for both error code of
-+ # zero AND non-empty stdout, which explains the odd construction:
-+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-+ $SED -e "$lt_sed_naive_backslashify"`
-+ else
-+ func_convert_core_file_wine_to_w32_result=
-+ fi
-+ fi
-+}
-+# end: func_convert_core_file_wine_to_w32
+
+
-+# func_convert_core_path_wine_to_w32 ARG
-+# Helper function used by path conversion functions when $build is *nix, and
-+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-+# configured wine environment available, with the winepath program in $build's
-+# $PATH. Assumes ARG has no leading or trailing path separator characters.
-+#
-+# ARG is path to be converted from $build format to win32.
-+# Result is available in $func_convert_core_path_wine_to_w32_result.
-+# Unconvertible file (directory) names in ARG are skipped; if no directory names
-+# are convertible, then the result may be empty.
-+func_convert_core_path_wine_to_w32 ()
-+{
-+ $opt_debug
-+ # unfortunately, winepath doesn't convert paths, only file names
-+ func_convert_core_path_wine_to_w32_result=""
-+ if test -n "$1"; then
-+ oldIFS=$IFS
-+ IFS=:
-+ for func_convert_core_path_wine_to_w32_f in $1; do
-+ IFS=$oldIFS
-+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
-+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-+ else
-+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-+ fi
-+ fi
-+ done
-+ IFS=$oldIFS
-+ fi
-+}
-+# end: func_convert_core_path_wine_to_w32
+
+
-+# func_cygpath ARGS...
-+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-+# (2), returns the Cygwin file name or path in func_cygpath_result (input
-+# file name or path is assumed to be in w32 format, as previously converted
-+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-+# or path in func_cygpath_result (input file name or path is assumed to be in
-+# Cygwin format). Returns an empty string on error.
-+#
-+# ARGS are passed to cygpath, with the last one being the file name or path to
-+# be converted.
-+#
-+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-+# environment variable; do not put it in $PATH.
-+func_cygpath ()
-+{
-+ $opt_debug
-+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-+ if test "$?" -ne 0; then
-+ # on failure, ensure result is empty
-+ func_cygpath_result=
-+ fi
-+ else
-+ func_cygpath_result=
-+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-+ fi
-+}
-+#end: func_cygpath
+
+
-+# func_convert_core_msys_to_w32 ARG
-+# Convert file name or path ARG from MSYS format to w32 format. Return
-+# result in func_convert_core_msys_to_w32_result.
-+func_convert_core_msys_to_w32 ()
-+{
-+ $opt_debug
-+ # awkward: cmd appends spaces to result
-+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-+}
-+#end: func_convert_core_msys_to_w32
+
+
-+# func_convert_file_check ARG1 ARG2
-+# Verify that ARG1 (a file name in $build format) was converted to $host
-+# format in ARG2. Otherwise, emit an error message, but continue (resetting
-+# func_to_host_file_result to ARG1).
-+func_convert_file_check ()
-+{
-+ $opt_debug
-+ if test -z "$2" && test -n "$1" ; then
-+ func_error "Could not determine host file name corresponding to"
-+ func_error " \`$1'"
-+ func_error "Continuing, but uninstalled executables may not work."
-+ # Fallback:
-+ func_to_host_file_result="$1"
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DLLTOOL"; then
++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
+ fi
-+}
-+# end func_convert_file_check
++done
++ done
++IFS=$as_save_IFS
+
-+
-+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-+# Verify that FROM_PATH (a path in $build format) was converted to $host
-+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-+# func_to_host_file_result to a simplistic fallback value (see below).
-+func_convert_path_check ()
-+{
-+ $opt_debug
-+ if test -z "$4" && test -n "$3"; then
-+ func_error "Could not determine the host path corresponding to"
-+ func_error " \`$3'"
-+ func_error "Continuing, but uninstalled executables may not work."
-+ # Fallback. This is a deliberately simplistic "conversion" and
-+ # should not be "improved". See libtool.info.
-+ if test "x$1" != "x$2"; then
-+ lt_replace_pathsep_chars="s|$1|$2|g"
-+ func_to_host_path_result=`echo "$3" |
-+ $SED -e "$lt_replace_pathsep_chars"`
-+ else
-+ func_to_host_path_result="$3"
-+ fi
-+ fi
-+}
-+# end func_convert_path_check
-+
-+
-+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-+# and appending REPL if ORIG matches BACKPAT.
-+func_convert_path_front_back_pathsep ()
-+{
-+ $opt_debug
-+ case $4 in
-+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-+ ;;
-+ esac
-+ case $4 in
-+ $2 ) func_append func_to_host_path_result "$3"
-+ ;;
-+ esac
-+}
-+# end func_convert_path_front_back_pathsep
++fi
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
+
+
-+##################################################
-+# $build to $host FILE NAME CONVERSION FUNCTIONS #
-+##################################################
-+# invoked via `$to_host_file_cmd ARG'
-+#
-+# In each case, ARG is the path to be converted from $build to $host format.
-+# Result will be available in $func_to_host_file_result.
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++ ac_ct_DLLTOOL=$DLLTOOL
++ # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DLLTOOL"; then
++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
+
-+# func_to_host_file ARG
-+# Converts the file name ARG from $build format to $host format. Return result
-+# in func_to_host_file_result.
-+func_to_host_file ()
-+{
-+ $opt_debug
-+ $to_host_file_cmd "$1"
-+}
-+# end func_to_host_file
++ if test "x$ac_ct_DLLTOOL" = x; then
++ DLLTOOL="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DLLTOOL=$ac_ct_DLLTOOL
++ fi
++else
++ DLLTOOL="$ac_cv_prog_DLLTOOL"
++fi
+
++test -z "$DLLTOOL" && DLLTOOL=dlltool
+
-+# func_to_tool_file ARG LAZY
-+# converts the file name ARG from $build format to toolchain format. Return
-+# result in func_to_tool_file_result. If the conversion in use is listed
-+# in (the comma separated) LAZY, no conversion takes place.
-+func_to_tool_file ()
-+{
-+ $opt_debug
-+ case ,$2, in
-+ *,"$to_tool_file_cmd",*)
-+ func_to_tool_file_result=$1
-+ ;;
-+ *)
-+ $to_tool_file_cmd "$1"
-+ func_to_tool_file_result=$func_to_host_file_result
-+ ;;
-+ esac
-+}
-+# end func_to_tool_file
+
+
-+# func_convert_file_noop ARG
-+# Copy ARG to func_to_host_file_result.
-+func_convert_file_noop ()
-+{
-+ func_to_host_file_result="$1"
-+}
-+# end func_convert_file_noop
+
+
-+# func_convert_file_msys_to_w32 ARG
-+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-+# conversion to w32 is not available inside the cwrapper. Returns result in
-+# func_to_host_file_result.
-+func_convert_file_msys_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_file_result="$1"
-+ if test -n "$1"; then
-+ func_convert_core_msys_to_w32 "$1"
-+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-+ fi
-+ func_convert_file_check "$1" "$func_to_host_file_result"
-+}
-+# end func_convert_file_msys_to_w32
+
+
-+# func_convert_file_cygwin_to_w32 ARG
-+# Convert file name ARG from Cygwin to w32 format. Returns result in
-+# func_to_host_file_result.
-+func_convert_file_cygwin_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_file_result="$1"
-+ if test -n "$1"; then
-+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-+ # LT_CYGPATH in this case.
-+ func_to_host_file_result=`cygpath -m "$1"`
-+ fi
-+ func_convert_file_check "$1" "$func_to_host_file_result"
-+}
-+# end func_convert_file_cygwin_to_w32
+
+
-+# func_convert_file_nix_to_w32 ARG
-+# Convert file name ARG from *nix to w32 format. Requires a wine environment
-+# and a working winepath. Returns result in func_to_host_file_result.
-+func_convert_file_nix_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_file_result="$1"
-+ if test -n "$1"; then
-+ func_convert_core_file_wine_to_w32 "$1"
-+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-+ fi
-+ func_convert_file_check "$1" "$func_to_host_file_result"
-+}
-+# end func_convert_file_nix_to_w32
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
++$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
-+# func_convert_file_msys_to_cygwin ARG
-+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-+# Returns result in func_to_host_file_result.
-+func_convert_file_msys_to_cygwin ()
-+{
-+ $opt_debug
-+ func_to_host_file_result="$1"
-+ if test -n "$1"; then
-+ func_convert_core_msys_to_w32 "$1"
-+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
-+ func_to_host_file_result="$func_cygpath_result"
-+ fi
-+ func_convert_file_check "$1" "$func_to_host_file_result"
-+}
-+# end func_convert_file_msys_to_cygwin
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
+
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
-+# func_convert_file_nix_to_cygwin ARG
-+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
-+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
-+# in func_to_host_file_result.
-+func_convert_file_nix_to_cygwin ()
-+{
-+ $opt_debug
-+ func_to_host_file_result="$1"
-+ if test -n "$1"; then
-+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-+ func_convert_core_file_wine_to_w32 "$1"
-+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-+ func_to_host_file_result="$func_cygpath_result"
-+ fi
-+ func_convert_file_check "$1" "$func_to_host_file_result"
-+}
-+# end func_convert_file_nix_to_cygwin
+
+
-+#############################################
-+# $build to $host PATH CONVERSION FUNCTIONS #
-+#############################################
-+# invoked via `$to_host_path_cmd ARG'
-+#
-+# In each case, ARG is the path to be converted from $build to $host format.
-+# The result will be available in $func_to_host_path_result.
-+#
-+# Path separators are also converted from $build format to $host format. If
-+# ARG begins or ends with a path separator character, it is preserved (but
-+# converted to $host format) on output.
-+#
-+# All path conversion functions are named using the following convention:
-+# file name conversion function : func_convert_file_X_to_Y ()
-+# path conversion function : func_convert_path_X_to_Y ()
-+# where, for any given $build/$host combination the 'X_to_Y' value is the
-+# same. If conversion functions are added for new $build/$host combinations,
-+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-+# will break.
+
+
-+# func_init_to_host_path_cmd
-+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-+# appropriate value, based on the value of $to_host_file_cmd.
-+to_host_path_cmd=
-+func_init_to_host_path_cmd ()
-+{
-+ $opt_debug
-+ if test -z "$to_host_path_cmd"; then
-+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
-+ fi
-+}
+
+
-+# func_to_host_path ARG
-+# Converts the path ARG from $build format to $host format. Return result
-+# in func_to_host_path_result.
-+func_to_host_path ()
-+{
-+ $opt_debug
-+ func_init_to_host_path_cmd
-+ $to_host_path_cmd "$1"
-+}
-+# end func_to_host_path
++if test -n "$ac_tool_prefix"; then
++ for ac_prog in ar
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_AR+set}" = set; then :
+@@ -6301,7 +6555,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_AR="${ac_tool_prefix}ar"
++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6321,11 +6575,15 @@ $as_echo "no" >&6; }
+ fi
+
+
++ test -n "$AR" && break
++ done
+ fi
+-if test -z "$ac_cv_prog_AR"; then
++if test -z "$AR"; then
+ ac_ct_AR=$AR
+- # Extract the first word of "ar", so it can be a program name with args.
+-set dummy ar; ac_word=$2
++ for ac_prog in ar
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+@@ -6341,7 +6599,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_ac_ct_AR="ar"
++ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6360,6 +6618,10 @@ else
+ $as_echo "no" >&6; }
+ fi
+
+
++ test -n "$ac_ct_AR" && break
++done
+
-+# func_convert_path_noop ARG
-+# Copy ARG to func_to_host_path_result.
-+func_convert_path_noop ()
-+{
-+ func_to_host_path_result="$1"
-+}
-+# end func_convert_path_noop
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+@@ -6371,16 +6633,72 @@ ac_tool_warned=yes ;;
+ esac
+ AR=$ac_ct_AR
+ fi
+-else
+- AR="$ac_cv_prog_AR"
+ fi
+
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
++: ${AR=ar}
++: ${AR_FLAGS=cru}
+
+
-+# func_convert_path_msys_to_w32 ARG
-+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-+# conversion to w32 is not available inside the cwrapper. Returns result in
-+# func_to_host_path_result.
-+func_convert_path_msys_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_path_result="$1"
-+ if test -n "$1"; then
-+ # Remove leading and trailing path separator characters from ARG. MSYS
-+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-+ # and winepath ignores them completely.
-+ func_stripname : : "$1"
-+ func_to_host_path_tmp1=$func_stripname_result
-+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-+ func_convert_path_check : ";" \
-+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
-+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-+ fi
-+}
-+# end func_convert_path_msys_to_w32
+
+
-+# func_convert_path_cygwin_to_w32 ARG
-+# Convert path ARG from Cygwin to w32 format. Returns result in
-+# func_to_host_file_result.
-+func_convert_path_cygwin_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_path_result="$1"
-+ if test -n "$1"; then
-+ # See func_convert_path_msys_to_w32:
-+ func_stripname : : "$1"
-+ func_to_host_path_tmp1=$func_stripname_result
-+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-+ func_convert_path_check : ";" \
-+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
-+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-+ fi
-+}
-+# end func_convert_path_cygwin_to_w32
+
+
-+# func_convert_path_nix_to_w32 ARG
-+# Convert path ARG from *nix to w32 format. Requires a wine environment and
-+# a working winepath. Returns result in func_to_host_file_result.
-+func_convert_path_nix_to_w32 ()
-+{
-+ $opt_debug
-+ func_to_host_path_result="$1"
-+ if test -n "$1"; then
-+ # See func_convert_path_msys_to_w32:
-+ func_stripname : : "$1"
-+ func_to_host_path_tmp1=$func_stripname_result
-+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-+ func_convert_path_check : ";" \
-+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
-+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-+ fi
-+}
-+# end func_convert_path_nix_to_w32
+
+
-+# func_convert_path_msys_to_cygwin ARG
-+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-+# Returns result in func_to_host_file_result.
-+func_convert_path_msys_to_cygwin ()
-+{
-+ $opt_debug
-+ func_to_host_path_result="$1"
-+ if test -n "$1"; then
-+ # See func_convert_path_msys_to_w32:
-+ func_stripname : : "$1"
-+ func_to_host_path_tmp1=$func_stripname_result
-+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-+ func_to_host_path_result="$func_cygpath_result"
-+ func_convert_path_check : : \
-+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
-+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-+ fi
-+}
-+# end func_convert_path_msys_to_cygwin
+
+
-+# func_convert_path_nix_to_cygwin ARG
-+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
-+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
-+# func_to_host_file_result.
-+func_convert_path_nix_to_cygwin ()
-+{
-+ $opt_debug
-+ func_to_host_path_result="$1"
-+ if test -n "$1"; then
-+ # Remove leading and trailing path separator characters from
-+ # ARG. msys behavior is inconsistent here, cygpath turns them
-+ # into '.;' and ';.', and winepath ignores them completely.
-+ func_stripname : : "$1"
-+ func_to_host_path_tmp1=$func_stripname_result
-+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-+ func_to_host_path_result="$func_cygpath_result"
-+ func_convert_path_check : : \
-+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
-+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-+ fi
-+}
-+# end func_convert_path_nix_to_cygwin
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
++$as_echo_n "checking for archiver @FILE support... " >&6; }
++if test "${lt_cv_ar_at_file+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ar_at_file=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
- # func_mode_compile arg...
- func_mode_compile ()
- {
-@@ -1314,12 +1985,12 @@
- ;;
++int
++main ()
++{
- -pie | -fpie | -fPIE)
-- pie_flag="$pie_flag $arg"
-+ func_append pie_flag " $arg"
- continue
- ;;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
- -shared | -static | -prefer-pic | -prefer-non-pic)
-- later="$later $arg"
-+ func_append later " $arg"
- continue
- ;;
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-@@ -1340,15 +2011,14 @@
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-- func_quote_for_eval "$arg"
-- lastarg="$lastarg $func_quote_for_eval_result"
-+ func_append_quoted lastarg "$arg"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$lastarg"
- lastarg=$func_stripname_result
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
++$as_echo "$lt_cv_ar_at_file" >&6; }
- # Add the arguments to base_compile.
-- base_compile="$base_compile $lastarg"
-+ func_append base_compile " $lastarg"
- continue
- ;;
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
-@@ -1364,8 +2034,7 @@
- esac # case $arg_mode
- # Aesthetically quote the previous argument.
-- func_quote_for_eval "$lastarg"
-- base_compile="$base_compile $func_quote_for_eval_result"
-+ func_append_quoted base_compile "$lastarg"
- done # for arg
- case $arg_mode in
-@@ -1496,17 +2165,16 @@
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
-- removelist="$removelist $output_obj"
-+ func_append removelist " $output_obj"
- $ECHO "$srcfile" > "$lockfile"
- fi
-
- $opt_dry_run || $RM $removelist
-- removelist="$removelist $lockfile"
-+ func_append removelist " $lockfile"
- trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-- if test -n "$fix_srcfile_path"; then
-- eval "srcfile=\"$fix_srcfile_path\""
-- fi
-+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-+ srcfile=$func_to_tool_file_result
- func_quote_for_eval "$srcfile"
- qsrcfile=$func_quote_for_eval_result
-
-@@ -1526,7 +2194,7 @@
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
-- command="$command -o $lobj"
-+ func_append command " -o $lobj"
- fi
-
- func_show_eval_locale "$command" \
-@@ -1573,11 +2241,11 @@
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
-- command="$command -o $obj"
-+ func_append command " -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
-- command="$command$suppress_output"
-+ func_append command "$suppress_output"
- func_show_eval_locale "$command" \
- '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-@@ -1622,13 +2290,13 @@
- }
-
- $opt_help || {
-- test "$mode" = compile && func_mode_compile ${1+"$@"}
-+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
- }
-
- func_mode_help ()
- {
- # We need to display help for each of the modes.
-- case $mode in
-+ case $opt_mode in
- "")
- # Generic help is extracted from the usage comments
- # at the start of this file.
-@@ -1659,8 +2327,8 @@
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -no-suppress do not suppress compiler output for multiple passes
-- -prefer-pic try to building PIC objects only
-- -prefer-non-pic try to building non-PIC objects only
-+ -prefer-pic try to build PIC objects only
-+ -prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
- -Wc,FLAG pass FLAG directly to the compiler
-@@ -1804,7 +2472,7 @@
- ;;
+@@ -6722,8 +7040,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- *)
-- func_fatal_help "invalid operation mode \`$mode'"
-+ func_fatal_help "invalid operation mode \`$opt_mode'"
- ;;
- esac
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-@@ -1819,13 +2487,13 @@
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -6759,6 +7077,7 @@ for ac_symprfx in "" "_"; do
else
- {
- func_help noexit
-- for mode in compile link execute install finish uninstall clean; do
-+ for opt_mode in compile link execute install finish uninstall clean; do
- func_mode_help
- done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
- {
- func_help noexit
-- for mode in compile link execute install finish uninstall clean; do
-+ for opt_mode in compile link execute install finish uninstall clean; do
- echo
- func_mode_help
- done
-@@ -1854,13 +2522,16 @@
- func_fatal_help "you must specify a COMMAND"
-
- # Handle -dlopen flags immediately.
-- for file in $execute_dlfiles; do
-+ for file in $opt_dlopen; do
- test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
- dir=
- case $file in
- *.la)
-+ func_resolve_sysroot "$file"
-+ file=$func_resolve_sysroot_result
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -6800,6 +7119,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
+
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
-@@ -1882,7 +2553,7 @@
- dir="$func_dirname_result"
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -6811,7 +7142,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
- if test -f "$dir/$objdir/$dlname"; then
-- dir="$dir/$objdir"
-+ func_append dir "/$objdir"
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -6837,8 +7168,8 @@ static const void *lt_preloaded_setup() {
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+@@ -6848,8 +7179,8 @@ _LT_EOF
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
else
- if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-@@ -1907,10 +2578,10 @@
- test -n "$absdir" && dir="$absdir"
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+@@ -6886,6 +7217,20 @@ else
+ $as_echo "ok" >&6; }
+ fi
- # Now add the directory to shlibpath_var.
-- if eval test -z \"\$$shlibpath_var\"; then
-- eval $shlibpath_var=\$dir
-+ if eval "test -z \"\$$shlibpath_var\""; then
-+ eval "$shlibpath_var=\"\$dir\""
- else
-- eval $shlibpath_var=\$dir:\$$shlibpath_var
-+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
++
++
++
++
++
++
++
-@@ -1939,8 +2610,7 @@
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
-- func_quote_for_eval "$file"
-- args="$args $func_quote_for_eval_result"
-+ func_append_quoted args "$file"
- done
- if test "X$opt_dry_run" = Xfalse; then
-@@ -1972,22 +2642,59 @@
- fi
- }
--test "$mode" = execute && func_mode_execute ${1+"$@"}
-+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+@@ -6905,6 +7250,41 @@ fi
- # func_mode_finish arg...
- func_mode_finish ()
- {
- $opt_debug
-- libdirs="$nonopt"
-+ libs=
-+ libdirs=
- admincmds=
-- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-- for dir
-- do
-- libdirs="$libdirs $dir"
-- done
-+ for opt in "$nonopt" ${1+"$@"}
-+ do
-+ if test -d "$opt"; then
-+ func_append libdirs " $opt"
-+
-+ elif test -f "$opt"; then
-+ if func_lalib_unsafe_p "$opt"; then
-+ func_append libs " $opt"
-+ else
-+ func_warning "\`$opt' is not a valid libtool archive"
-+ fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
++$as_echo_n "checking for sysroot... " >&6; }
+
-+ else
-+ func_fatal_error "invalid argument \`$opt'"
-+ fi
-+ done
++# Check whether --with-libtool-sysroot was given.
++if test "${with_libtool_sysroot+set}" = set; then :
++ withval=$with_libtool_sysroot;
++else
++ with_libtool_sysroot=no
++fi
+
-+ if test -n "$libs"; then
-+ if test -n "$lt_sysroot"; then
-+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
-+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
-+ else
-+ sysroot_cmd=
-+ fi
+
-+ # Remove sysroot references
-+ if $opt_dry_run; then
-+ for lib in $libs; do
-+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
-+ done
-+ else
-+ tmpdir=`func_mktempdir`
-+ for lib in $libs; do
-+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
-+ > $tmpdir/tmp-la
-+ mv -f $tmpdir/tmp-la $lib
-+ done
-+ ${RM}r "$tmpdir"
-+ fi
-+ fi
-
-+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
-@@ -1997,7 +2704,7 @@
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
-- $opt_dry_run || eval "$cmds" || admincmds="$admincmds
-+ $opt_dry_run || eval "$cmds" || func_append admincmds "
- $cmds"
- fi
- done
-@@ -2006,53 +2713,55 @@
- # Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
-
-- echo "----------------------------------------------------------------------"
-- echo "Libraries have been installed in:"
-- for libdir in $libdirs; do
-- $ECHO " $libdir"
-- done
-- echo
-- echo "If you ever happen to want to link against installed libraries"
-- echo "in a given directory, LIBDIR, you must either use libtool, and"
-- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-- echo "flag during linking and do at least one of the following:"
-- if test -n "$shlibpath_var"; then
-- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
-- echo " during execution"
-- fi
-- if test -n "$runpath_var"; then
-- echo " - add LIBDIR to the \`$runpath_var' environment variable"
-- echo " during linking"
-- fi
-- if test -n "$hardcode_libdir_flag_spec"; then
-- libdir=LIBDIR
-- eval "flag=\"$hardcode_libdir_flag_spec\""
-+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-+ echo "----------------------------------------------------------------------"
-+ echo "Libraries have been installed in:"
-+ for libdir in $libdirs; do
-+ $ECHO " $libdir"
-+ done
-+ echo
-+ echo "If you ever happen to want to link against installed libraries"
-+ echo "in a given directory, LIBDIR, you must either use libtool, and"
-+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-+ echo "flag during linking and do at least one of the following:"
-+ if test -n "$shlibpath_var"; then
-+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
-+ echo " during execution"
-+ fi
-+ if test -n "$runpath_var"; then
-+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
-+ echo " during linking"
-+ fi
-+ if test -n "$hardcode_libdir_flag_spec"; then
-+ libdir=LIBDIR
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-
-- $ECHO " - use the \`$flag' linker flag"
-- fi
-- if test -n "$admincmds"; then
-- $ECHO " - have your system administrator run these commands:$admincmds"
-- fi
-- if test -f /etc/ld.so.conf; then
-- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-- fi
-- echo
-+ $ECHO " - use the \`$flag' linker flag"
-+ fi
-+ if test -n "$admincmds"; then
-+ $ECHO " - have your system administrator run these commands:$admincmds"
-+ fi
-+ if test -f /etc/ld.so.conf; then
-+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-+ fi
-+ echo
-
-- echo "See any operating system documentation about shared libraries for"
-- case $host in
-- solaris2.[6789]|solaris2.1[0-9])
-- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-- echo "pages."
-- ;;
-- *)
-- echo "more information, such as the ld(1) and ld.so(8) manual pages."
-- ;;
-- esac
-- echo "----------------------------------------------------------------------"
-+ echo "See any operating system documentation about shared libraries for"
-+ case $host in
-+ solaris2.[6789]|solaris2.1[0-9])
-+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-+ echo "pages."
-+ ;;
-+ *)
-+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
-+ ;;
-+ esac
-+ echo "----------------------------------------------------------------------"
-+ fi
- exit $EXIT_SUCCESS
- }
-
--test "$mode" = finish && func_mode_finish ${1+"$@"}
-+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
-
-
- # func_mode_install arg...
-@@ -2077,7 +2786,7 @@
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- func_quote_for_eval "$arg"
-- install_prog="$install_prog$func_quote_for_eval_result"
-+ func_append install_prog "$func_quote_for_eval_result"
- install_shared_prog=$install_prog
- case " $install_prog " in
- *[\\\ /]cp\ *) install_cp=: ;;
-@@ -2097,7 +2806,7 @@
- do
- arg2=
- if test -n "$dest"; then
-- files="$files $dest"
-+ func_append files " $dest"
- dest=$arg
- continue
- fi
-@@ -2135,11 +2844,11 @@
-
- # Aesthetically quote the argument.
- func_quote_for_eval "$arg"
-- install_prog="$install_prog $func_quote_for_eval_result"
-+ func_append install_prog " $func_quote_for_eval_result"
- if test -n "$arg2"; then
- func_quote_for_eval "$arg2"
- fi
-- install_shared_prog="$install_shared_prog $func_quote_for_eval_result"
-+ func_append install_shared_prog " $func_quote_for_eval_result"
- done
-
- test -z "$install_prog" && \
-@@ -2151,7 +2860,7 @@
- if test -n "$install_override_mode" && $no_mode; then
- if $install_cp; then :; else
- func_quote_for_eval "$install_override_mode"
-- install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
-+ func_append install_shared_prog " -m $func_quote_for_eval_result"
- fi
- fi
-
-@@ -2209,10 +2918,13 @@
- case $file in
- *.$libext)
- # Do the static libraries later.
-- staticlibs="$staticlibs $file"
-+ func_append staticlibs " $file"
- ;;
-
- *.la)
-+ func_resolve_sysroot "$file"
-+ file=$func_resolve_sysroot_result
++lt_sysroot=
++case ${with_libtool_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
++$as_echo "${with_libtool_sysroot}" >&6; }
++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
++ ;;
++esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
++$as_echo "${lt_sysroot:-no}" >&6; }
+
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
-@@ -2226,23 +2938,30 @@
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
-- *) current_libdirs="$current_libdirs $libdir" ;;
-+ *) func_append current_libdirs " $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
-- *) future_libdirs="$future_libdirs $libdir" ;;
-+ *) func_append future_libdirs " $libdir" ;;
- esac
- fi
-
- func_dirname "$file" "/" ""
- dir="$func_dirname_result"
-- dir="$dir$objdir"
-+ func_append dir "$objdir"
-
- if test -n "$relink_command"; then
-+ # Strip any trailing slash from the destination.
-+ func_stripname '' '/' "$libdir"
-+ destlibdir=$func_stripname_result
+
-+ func_stripname '' '/' "$destdir"
-+ s_destdir=$func_stripname_result
+
- # Determine the prefix the user has applied to our future dir.
-- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-+ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
-@@ -2315,7 +3034,7 @@
- func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
- # Maybe install the static library, too.
-- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
- ;;
-
- *.lo)
-@@ -2503,7 +3222,7 @@
- test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
-
-- if test -n "$current_libdirs" && $opt_finish; then
-+ if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- $opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-@@ -2512,7 +3231,7 @@
- fi
- }
--test "$mode" = install && func_mode_install ${1+"$@"}
-+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+ # Check whether --enable-libtool-lock was given.
+@@ -7113,6 +7493,123 @@ esac
- # func_generate_dlsyms outputname originator pic_p
-@@ -2559,6 +3278,18 @@
- #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
- #endif
+ need_locks="$enable_libtool_lock"
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT_DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT_DLSYM_CONST
-+#else
-+# define LT_DLSYM_CONST const
-+#endif
-+
- /* External symbol declarations for the compiler. */\
- "
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
++set dummy ${ac_tool_prefix}mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$MANIFEST_TOOL"; then
++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
++if test -n "$MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
++$as_echo "$MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
++ # Extract the first word of "mt", so it can be a program name with args.
++set dummy mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_MANIFEST_TOOL"; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
++if test -n "$ac_ct_MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_MANIFEST_TOOL" = x; then
++ MANIFEST_TOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ fi
++else
++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++fi
++
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
++if test "${lt_cv_path_mainfest_tool+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&5
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
++$as_echo "$lt_cv_path_mainfest_tool" >&6; }
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++
++
++
++
++
-@@ -2570,21 +3301,22 @@
- # Add our own program objects to the symbol list.
- progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
- for progfile in $progfiles; do
-- func_verbose "extracting global C symbols from \`$progfile'"
-- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
-+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
-+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
- done
+ case $host_os in
+ rhapsody* | darwin*)
+@@ -7676,6 +8173,8 @@ _LT_EOF
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
++ echo "$RANLIB libconftest.a" >&5
++ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+ int main() { return 0;}
+ _LT_EOF
+@@ -7871,7 +8370,8 @@ fi
+ LIBTOOL_DEPS="$ltmain"
- if test -n "$exclude_expsyms"; then
- $opt_dry_run || {
-- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-- $MV "$nlist"T "$nlist"
-+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
- }
- fi
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
- if test -n "$export_symbols_regex"; then
- $opt_dry_run || {
-- $EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T
-- $MV "$nlist"T "$nlist"
-+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
- }
- fi
-@@ -2593,23 +3325,23 @@
- export_symbols="$output_objdir/$outputname.exp"
- $opt_dry_run || {
- $RM $export_symbols
-- ${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' < "$nlist" > "$export_symbols"
-+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
-- echo EXPORTS > "$output_objdir/$outputname.def"
-- cat "$export_symbols" >> "$output_objdir/$outputname.def"
-+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- else
- $opt_dry_run || {
-- ${SED} -e 's/\([].[*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/' < "$export_symbols" > "$output_objdir/$outputname.exp"
-- $GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T
-- $MV "$nlist"T "$nlist"
-+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-+ eval '$MV "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
-- echo EXPORTS > "$output_objdir/$outputname.def"
-- cat "$nlist" >> "$output_objdir/$outputname.def"
-+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
-@@ -2620,10 +3352,52 @@
- func_verbose "extracting global C symbols from \`$dlprefile'"
- func_basename "$dlprefile"
- name="$func_basename_result"
-- $opt_dry_run || {
-- $ECHO ": $name " >> "$nlist"
-- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-- }
-+ case $host in
-+ *cygwin* | *mingw* | *cegcc* )
-+ # if an import library, we need to obtain dlname
-+ if func_win32_import_lib_p "$dlprefile"; then
-+ func_tr_sh "$dlprefile"
-+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
-+ dlprefile_dlbasename=""
-+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
-+ # Use subshell, to avoid clobbering current variable values
-+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-+ if test -n "$dlprefile_dlname" ; then
-+ func_basename "$dlprefile_dlname"
-+ dlprefile_dlbasename="$func_basename_result"
-+ else
-+ # no lafile. user explicitly requested -dlpreopen <import library>.
-+ $sharedlib_from_linklib_cmd "$dlprefile"
-+ dlprefile_dlbasename=$sharedlib_from_linklib_result
-+ fi
-+ fi
-+ $opt_dry_run || {
-+ if test -n "$dlprefile_dlbasename" ; then
-+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
-+ else
-+ func_warning "Could not compute DLL name from $name"
-+ eval '$ECHO ": $name " >> "$nlist"'
-+ fi
-+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
-+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
-+ }
-+ else # not an import lib
-+ $opt_dry_run || {
-+ eval '$ECHO ": $name " >> "$nlist"'
-+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-+ }
-+ fi
-+ ;;
-+ *)
-+ $opt_dry_run || {
-+ eval '$ECHO ": $name " >> "$nlist"'
-+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-+ }
-+ ;;
-+ esac
- done
- $opt_dry_run || {
-@@ -2661,26 +3435,9 @@
- const char *name;
- void *address;
- } lt_dlsymlist;
--"
-- case $host in
-- *cygwin* | *mingw* | *cegcc* )
-- echo >> "$output_objdir/$my_dlsyms" "\
--/* DATA imports from DLLs on WIN32 con't be const, because
-- runtime relocations are performed -- see ld's documentation
-- on pseudo-relocs. */"
-- lt_dlsym_const= ;;
-- *osf5*)
-- echo >> "$output_objdir/$my_dlsyms" "\
--/* This system does not cope well with relocations in const data */"
-- lt_dlsym_const= ;;
-- *)
-- lt_dlsym_const=const ;;
-- esac
--
-- echo >> "$output_objdir/$my_dlsyms" "\
--extern $lt_dlsym_const lt_dlsymlist
-+extern LT_DLSYM_CONST lt_dlsymlist
- lt_${my_prefix}_LTX_preloaded_symbols[];
--$lt_dlsym_const lt_dlsymlist
-+LT_DLSYM_CONST lt_dlsymlist
- lt_${my_prefix}_LTX_preloaded_symbols[] =
- {\
- { \"$my_originator\", (void *) 0 },"
-@@ -2736,7 +3493,7 @@
- for arg in $LTCFLAGS; do
- case $arg in
- -pie | -fpie | -fPIE) ;;
-- *) symtab_cflags="$symtab_cflags $arg" ;;
-+ *) func_append symtab_cflags " $arg" ;;
- esac
- done
+@@ -7960,7 +8460,7 @@ aix3*)
+ esac
-@@ -2796,9 +3553,11 @@
- win32_libid_type="x86 archive import"
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -8258,8 +8758,6 @@ fi
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8425,6 +8923,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -8487,7 +8991,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+@@ -8544,13 +9048,17 @@ case $host_os in
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
- *ar\ archive*) # could be an import, or static
-- if $OBJDUMP -f "$1" | $SED -e '10q' 2>/dev/null |
-- $EGREP 'file format (pe-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-- win32_nmres=`$NM -f posix -A "$1" |
-+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
-+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-+ func_to_tool_file "$1" func_convert_file_msys_to_w32
-+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
- 1,100{
- / I /{
-@@ -2827,6 +3586,131 @@
- $ECHO "$win32_libid_type"
- }
+ esac
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
+-
+-
+-
+-
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -8611,6 +9119,11 @@ fi
+
+
-+# func_cygming_dll_for_implib ARG
-+#
-+# Platform-specific function to extract the
-+# name of the DLL associated with the specified
-+# import library ARG.
-+# Invoked by eval'ing the libtool variable
-+# $sharedlib_from_linklib_cmd
-+# Result is available in the variable
-+# $sharedlib_from_linklib_result
-+func_cygming_dll_for_implib ()
-+{
-+ $opt_debug
-+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-+}
+
-+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-+#
-+# The is the core of a fallback implementation of a
-+# platform-specific function to extract the name of the
-+# DLL associated with the specified import library LIBNAME.
-+#
-+# SECTION_NAME is either .idata$6 or .idata$7, depending
-+# on the platform and compiler that created the implib.
-+#
-+# Echos the name of the DLL associated with the
-+# specified import library.
-+func_cygming_dll_for_implib_fallback_core ()
-+{
-+ $opt_debug
-+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
-+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
-+ $SED '/^Contents of section '"$match_literal"':/{
-+ # Place marker at beginning of archive member dllname section
-+ s/.*/====MARK====/
-+ p
-+ d
-+ }
-+ # These lines can sometimes be longer than 43 characters, but
-+ # are always uninteresting
-+ /:[ ]*file format pe[i]\{,1\}-/d
-+ /^In archive [^:]*:/d
-+ # Ensure marker is printed
-+ /^====MARK====/p
-+ # Remove all lines with less than 43 characters
-+ /^.\{43\}/!d
-+ # From remaining lines, remove first 43 characters
-+ s/^.\{43\}//' |
-+ $SED -n '
-+ # Join marker and all lines until next marker into a single line
-+ /^====MARK====/ b para
-+ H
-+ $ b para
-+ b
-+ :para
-+ x
-+ s/\n//g
-+ # Remove the marker
-+ s/^====MARK====//
-+ # Remove trailing dots and whitespace
-+ s/[\. \t]*$//
-+ # Print
-+ /./p' |
-+ # we now have a list, one entry per line, of the stringified
-+ # contents of the appropriate section of all members of the
-+ # archive which possess that section. Heuristic: eliminate
-+ # all those which have a first or second character that is
-+ # a '.' (that is, objdump's representation of an unprintable
-+ # character.) This should work for all archives with less than
-+ # 0x302f exports -- but will fail for DLLs whose name actually
-+ # begins with a literal '.' or a single character followed by
-+ # a '.'.
-+ #
-+ # Of those that remain, print the first one.
-+ $SED -e '/^\./d;/^.\./d;q'
-+}
+
-+# func_cygming_gnu_implib_p ARG
-+# This predicate returns with zero status (TRUE) if
-+# ARG is a GNU/binutils-style import library. Returns
-+# with nonzero status (FALSE) otherwise.
-+func_cygming_gnu_implib_p ()
-+{
-+ $opt_debug
-+ func_to_tool_file "$1" func_convert_file_msys_to_w32
-+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-+ test -n "$func_cygming_gnu_implib_tmp"
-+}
+
-+# func_cygming_ms_implib_p ARG
-+# This predicate returns with zero status (TRUE) if
-+# ARG is an MS-style import library. Returns
-+# with nonzero status (FALSE) otherwise.
-+func_cygming_ms_implib_p ()
-+{
-+ $opt_debug
-+ func_to_tool_file "$1" func_convert_file_msys_to_w32
-+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-+ test -n "$func_cygming_ms_implib_tmp"
-+}
+
-+# func_cygming_dll_for_implib_fallback ARG
-+# Platform-specific function to extract the
-+# name of the DLL associated with the specified
-+# import library ARG.
-+#
-+# This fallback implementation is for use when $DLLTOOL
-+# does not support the --identify-strict option.
-+# Invoked by eval'ing the libtool variable
-+# $sharedlib_from_linklib_cmd
-+# Result is available in the variable
-+# $sharedlib_from_linklib_result
-+func_cygming_dll_for_implib_fallback ()
-+{
-+ $opt_debug
-+ if func_cygming_gnu_implib_p "$1" ; then
-+ # binutils import library
-+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-+ elif func_cygming_ms_implib_p "$1" ; then
-+ # ms-generated import library
-+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
-+ else
-+ # unknown
-+ sharedlib_from_linklib_result=""
-+ fi
-+}
-
-
- # func_extract_an_archive dir oldlib
-@@ -2917,7 +3801,7 @@
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
-- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
- $LIPO -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- $RM -rf unfat-$$
-@@ -2932,7 +3816,7 @@
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
-- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
- done
-
- func_extract_archives_result="$my_oldobjs"
-@@ -3014,7 +3898,110 @@
- _LTECHO_EOF'
- }
- ECHO=\"$qECHO\"
-- fi\
-+ fi
+
-+# Very basic option parsing. These options are (a) specific to
-+# the libtool wrapper, (b) are identical between the wrapper
-+# /script/ and the wrapper /executable/ which is used only on
-+# windows platforms, and (c) all begin with the string "--lt-"
-+# (application programs are unlikely to have options which match
-+# this pattern).
-+#
-+# There are only two supported options: --lt-debug and
-+# --lt-dump-script. There is, deliberately, no --lt-help.
-+#
-+# The first argument to this parsing function should be the
-+# script's $0 value, followed by "$@".
-+lt_option_debug=
-+func_parse_lt_options ()
-+{
-+ lt_script_arg0=\$0
-+ shift
-+ for lt_opt
-+ do
-+ case \"\$lt_opt\" in
-+ --lt-debug) lt_option_debug=1 ;;
-+ --lt-dump-script)
-+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-+ cat \"\$lt_dump_D/\$lt_dump_F\"
-+ exit 0
-+ ;;
-+ --lt-*)
-+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-+ exit 1
-+ ;;
-+ esac
-+ done
-+
-+ # Print the debug banner immediately:
-+ if test -n \"\$lt_option_debug\"; then
-+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-+ fi
-+}
-+
-+# Used when --lt-debug. Prints its arguments to stdout
-+# (redirection is the responsibility of the caller)
-+func_lt_dump_args ()
-+{
-+ lt_dump_args_N=1;
-+ for lt_arg
-+ do
-+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-+ done
-+}
-+
-+# Core function for launching the target application
-+func_exec_program_core ()
-+{
-+"
-+ case $host in
-+ # Backslashes separate directories on plain windows
-+ *-*-mingw | *-*-os2* | *-cegcc*)
-+ $ECHO "\
-+ if test -n \"\$lt_option_debug\"; then
-+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-+ func_lt_dump_args \${1+\"\$@\"} 1>&2
-+ fi
-+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-+"
-+ ;;
-+
-+ *)
-+ $ECHO "\
-+ if test -n \"\$lt_option_debug\"; then
-+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-+ func_lt_dump_args \${1+\"\$@\"} 1>&2
-+ fi
-+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
-+"
-+ ;;
-+ esac
-+ $ECHO "\
-+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-+ exit 1
-+}
-+
-+# A function to encapsulate launching the target application
-+# Strips options in the --lt-* namespace from \$@ and
-+# launches target application with the remaining arguments.
-+func_exec_program ()
-+{
-+ for lt_wr_arg
-+ do
-+ case \$lt_wr_arg in
-+ --lt-*) ;;
-+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-+ esac
-+ shift
-+ done
-+ func_exec_program_core \${1+\"\$@\"}
-+}
-+
-+ # Parse options
-+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
-
- # Find the directory that this script lives in.
- thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
-@@ -3078,7 +4065,7 @@
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -8961,7 +9474,8 @@ _LT_EOF
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
-- if relink_command_output=\`eval \"\$relink_command\" 2>&1\`; then :
-+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -9009,7 +9523,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -9060,12 +9574,12 @@ _LT_EOF
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -9079,8 +9593,8 @@ _LT_EOF
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
else
- $ECHO \"\$relink_command_output\" >&2
- $RM \"\$progdir/\$file\"
-@@ -3102,6 +4089,18 @@
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
- if test -f \"\$progdir/\$program\"; then"
+@@ -9098,8 +9612,8 @@ _LT_EOF
-+ # fixup the dll searchpath if we need to.
-+ #
-+ # Fix the DLL searchpath if we need to. Do this before prepending
-+ # to shlibpath, because on Windows, both are PATH and uninstalled
-+ # libraries must come first.
-+ if test -n "$dllsearchpath"; then
-+ $ECHO "\
-+ # Add the dll search path components to the executable PATH
-+ PATH=$dllsearchpath:\$PATH
-+"
-+ fi
-+
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $ECHO "\
-@@ -3116,35 +4115,10 @@
- "
- fi
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9145,8 +9659,8 @@ _LT_EOF
-- # fixup the dll searchpath if we need to.
-- if test -n "$dllsearchpath"; then
-- $ECHO "\
-- # Add the dll search path components to the executable PATH
-- PATH=$dllsearchpath:\$PATH
--"
-- fi
--
- $ECHO "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
--"
-- case $host in
-- # Backslashes separate directories on plain windows
-- *-*-mingw | *-*-os2* | *-cegcc*)
-- $ECHO "\
-- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
--"
-- ;;
--
-- *)
-- $ECHO "\
-- exec \"\$progdir/\$program\" \${1+\"\$@\"}
--"
-- ;;
-- esac
-- $ECHO "\
-- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-- exit 1
-+ func_exec_program \${1+\"\$@\"}
- fi
- else
- # The program doesn't exist.
-@@ -3158,166 +4132,6 @@
- }
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9276,7 +9790,13 @@ _LT_EOF
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+ int
+@@ -9289,22 +9809,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
--# func_to_host_path arg
--#
--# Convert paths to host format when used with build tools.
--# Intended for use with "native" mingw (where libtool itself
--# is running under the msys shell), or in the following cross-
--# build environments:
--# $build $host
--# mingw (msys) mingw [e.g. native]
--# cygwin mingw
--# *nix + wine mingw
--# where wine is equipped with the `winepath' executable.
--# In the native mingw case, the (msys) shell automatically
--# converts paths for any non-msys applications it launches,
--# but that facility isn't available from inside the cwrapper.
--# Similar accommodations are necessary for $host mingw and
--# $build cygwin. Calling this function does no harm for other
--# $host/$build combinations not listed above.
--#
--# ARG is the path (on $build) that should be converted to
--# the proper representation for $host. The result is stored
--# in $func_to_host_path_result.
--func_to_host_path ()
--{
-- func_to_host_path_result="$1"
-- if test -n "$1"; then
-- case $host in
-- *mingw* )
-- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-- case $build in
-- *mingw* ) # actually, msys
-- # awkward: cmd appends spaces to result
-- func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null |
-- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-- ;;
-- *cygwin* )
-- func_to_host_path_result=`cygpath -w "$1" |
-- $SED -e "$lt_sed_naive_backslashify"`
-- ;;
-- * )
-- # Unfortunately, winepath does not exit with a non-zero
-- # error code, so we are forced to check the contents of
-- # stdout. On the other hand, if the command is not
-- # found, the shell will set an exit code of 127 and print
-- # *an error message* to stdout. So we must check for both
-- # error code of zero AND non-empty stdout, which explains
-- # the odd construction:
-- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-- func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" |
-- $SED -e "$lt_sed_naive_backslashify"`
-- else
-- # Allow warning below.
-- func_to_host_path_result=
-- fi
-- ;;
-- esac
-- if test -z "$func_to_host_path_result" ; then
-- func_error "Could not determine host path corresponding to"
-- func_error " \`$1'"
-- func_error "Continuing, but uninstalled executables may not work."
-- # Fallback:
-- func_to_host_path_result="$1"
-- fi
-- ;;
-- esac
-- fi
--}
--# end: func_to_host_path
--
--# func_to_host_pathlist arg
--#
--# Convert pathlists to host format when used with build tools.
--# See func_to_host_path(), above. This function supports the
--# following $build/$host combinations (but does no harm for
--# combinations not listed here):
--# $build $host
--# mingw (msys) mingw [e.g. native]
--# cygwin mingw
--# *nix + wine mingw
--#
--# Path separators are also converted from $build format to
--# $host format. If ARG begins or ends with a path separator
--# character, it is preserved (but converted to $host format)
--# on output.
--#
--# ARG is a pathlist (on $build) that should be converted to
--# the proper representation on $host. The result is stored
--# in $func_to_host_pathlist_result.
--func_to_host_pathlist ()
--{
-- func_to_host_pathlist_result="$1"
-- if test -n "$1"; then
-- case $host in
-- *mingw* )
-- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-- # Remove leading and trailing path separator characters from
-- # ARG. msys behavior is inconsistent here, cygpath turns them
-- # into '.;' and ';.', and winepath ignores them completely.
-- func_stripname : : "$1"
-- func_to_host_pathlist_tmp1=$func_stripname_result
-- case $build in
-- *mingw* ) # Actually, msys.
-- # Awkward: cmd appends spaces to result.
-- func_to_host_pathlist_result=`
-- ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null |
-- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-- ;;
-- *cygwin* )
-- func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" |
-- $SED -e "$lt_sed_naive_backslashify"`
-- ;;
-- * )
-- # unfortunately, winepath doesn't convert pathlists
-- func_to_host_pathlist_result=""
-- func_to_host_pathlist_oldIFS=$IFS
-- IFS=:
-- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-- IFS=$func_to_host_pathlist_oldIFS
-- if test -n "$func_to_host_pathlist_f" ; then
-- func_to_host_path "$func_to_host_pathlist_f"
-- if test -n "$func_to_host_path_result" ; then
-- if test -z "$func_to_host_pathlist_result" ; then
-- func_to_host_pathlist_result="$func_to_host_path_result"
-- else
-- func_append func_to_host_pathlist_result ";$func_to_host_path_result"
-- fi
-- fi
-- fi
-- done
-- IFS=$func_to_host_pathlist_oldIFS
-- ;;
-- esac
-- if test -z "$func_to_host_pathlist_result"; then
-- func_error "Could not determine the host path(s) corresponding to"
-- func_error " \`$1'"
-- func_error "Continuing, but uninstalled executables may not work."
-- # Fallback. This may break if $1 contains DOS-style drive
-- # specifications. The fix is not to complicate the expression
-- # below, but for the user to provide a working wine installation
-- # with winepath so that path translation in the cross-to-mingw
-- # case works properly.
-- lt_replace_pathsep_nix_to_dos="s|:|;|g"
-- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-- $SED -e "$lt_replace_pathsep_nix_to_dos"`
-- fi
-- # Now, add the leading and trailing path separators back
-- case "$1" in
-- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-- ;;
-- esac
-- case "$1" in
-- *: ) func_append func_to_host_pathlist_result ";"
-- ;;
-- esac
-- ;;
-- esac
-- fi
--}
--# end: func_to_host_pathlist
--
- # func_emit_cwrapperexe_src
- # emit the source code for a wrapper executable on stdout
- # Must ONLY be called from within func_mode_link because
-@@ -3334,10 +4148,6 @@
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
--
-- Currently, it simply execs the wrapper *script* "$SHELL $output",
-- but could eventually absorb all of the scripts functionality and
-- exec $objdir/$outputname directly.
- */
- EOF
- cat <<"EOF"
-@@ -3462,22 +4272,13 @@
- if (stale) { free ((void *) stale); stale = 0; } \
- } while (0)
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -9316,7 +9843,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
--#undef LTWRAPPER_DEBUGPRINTF
--#if defined LT_DEBUGWRAPPER
--# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
--static void
--ltwrapper_debugprintf (const char *fmt, ...)
--{
-- va_list args;
-- va_start (args, fmt);
-- (void) vfprintf (stderr, fmt, args);
-- va_end (args);
--}
-+#if defined(LT_DEBUGWRAPPER)
-+static int lt_debug = 1;
- #else
--# define LTWRAPPER_DEBUGPRINTF(args)
-+static int lt_debug = 0;
- #endif
+ int
+@@ -9329,22 +9862,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
--const char *program_name = NULL;
-+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- void *xmalloc (size_t num);
- char *xstrdup (const char *string);
-@@ -3487,7 +4288,10 @@
- int make_executable (const char *path);
- int check_executable (const char *path);
- char *strendzap (char *str, const char *pat);
--void lt_fatal (const char *message, ...);
-+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-+void lt_fatal (const char *file, int line, const char *message, ...);
-+static const char *nonnull (const char *s);
-+static const char *nonempty (const char *s);
- void lt_setenv (const char *name, const char *value);
- char *lt_extend_str (const char *orig_value, const char *add, int to_end);
- void lt_update_exe_path (const char *name, const char *value);
-@@ -3497,14 +4301,14 @@
- EOF
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -9389,20 +9929,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- hardcode_libdir_flag_spec=' '
+- allow_undefined_flag=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- old_archive_from_new_cmds='true'
+- # FIXME: Should let the user specify the lib program.
+- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
+- enable_shared_with_static_runtimes=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
+ ;;
- cat <<EOF
--const char * MAGIC_EXE = "$magic_exe";
-+volatile const char * MAGIC_EXE = "$magic_exe";
- const char * LIB_PATH_VARNAME = "$shlibpath_var";
- EOF
+ darwin* | rhapsody*)
+@@ -9463,7 +10046,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-- func_to_host_pathlist "$temp_rpath"
-+ func_to_host_path "$temp_rpath"
- cat <<EOF
--const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
-+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
- EOF
- else
- cat <<"EOF"
-@@ -3513,10 +4317,10 @@
- fi
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+@@ -9471,7 +10054,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- if test -n "$dllsearchpath"; then
-- func_to_host_pathlist "$dllsearchpath:"
-+ func_to_host_path "$dllsearchpath:"
- cat <<EOF
- const char * EXE_PATH_VARNAME = "PATH";
--const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
-+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
- EOF
- else
- cat <<"EOF"
-@@ -3539,12 +4343,10 @@
- cat <<"EOF"
+ hpux9*)
+ if test "$GCC" = yes; then
+- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -9487,7 +10070,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- #define LTWRAPPER_OPTION_PREFIX "--lt-"
--#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -9511,10 +10094,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -9593,23 +10176,36 @@ fi
--static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
- static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if test "${lt_cv_irix_exported_symbol+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-int foo(void) {}
++int foo (void) { return 0; }
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
- static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
-+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
-
- int
- main (int argc, char *argv[])
-@@ -3561,10 +4363,13 @@
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
-- LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
-- LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
-+ newargz = XMALLOC (char *, argc + 1);
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS="$save_LDFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -9694,7 +10290,7 @@ rm -f core conftest.err conftest.$ac_objext \
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+@@ -9713,9 +10309,9 @@ rm -f core conftest.err conftest.$ac_objext \
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -10291,8 +10887,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
-- /* very simple arg parsing; don't want to rely on getopt */
-+ /* very simple arg parsing; don't want to rely on getopt
-+ * also, copy all non cwrapper options to newargz, except
-+ * argz[0], which is handled differently
-+ */
-+ newargc=0;
- for (i = 1; i < argc; i++)
- {
- if (strcmp (argv[i], dumpscript_opt) == 0)
-@@ -3581,21 +4386,54 @@
- lt_dump_script (stdout);
- return 0;
- }
-+ if (strcmp (argv[i], debug_opt) == 0)
-+ {
-+ lt_debug = 1;
-+ continue;
-+ }
-+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-+ {
-+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-+ namespace, but it is not one of the ones we know about and
-+ have already dealt with, above (inluding dump-script), then
-+ report an error. Otherwise, targets might begin to believe
-+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-+ namespace. The first time any user complains about this, we'll
-+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-+ or a configure.ac-settable value.
-+ */
-+ lt_fatal (__FILE__, __LINE__,
-+ "unrecognized %s option: '%s'",
-+ ltwrapper_option_prefix, argv[i]);
-+ }
-+ /* otherwise ... */
-+ newargz[++newargc] = xstrdup (argv[i]);
- }
-+ newargz[++newargc] = NULL;
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -10325,13 +10922,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
+
-+EOF
-+ cat <<EOF
-+ /* The GNU banner must be the first non-error debug message */
-+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-+EOF
-+ cat <<"EOF"
-+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
-
-- newargz = XMALLOC (char *, argc + 1);
- tmp_pathspec = find_executable (argv[0]);
- if (tmp_pathspec == NULL)
-- lt_fatal ("Couldn't find %s", argv[0]);
-- LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-- tmp_pathspec));
-+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(main) found exe (before symlink chase) at: %s\n",
-+ tmp_pathspec);
-
- actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-- LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-- actual_cwrapper_path));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(main) found exe (after symlink chase) at: %s\n",
-+ actual_cwrapper_path);
- XFREE (tmp_pathspec);
-
-- actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
-+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
- strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
- /* wrapper name transforms */
-@@ -3613,8 +4451,9 @@
- target_name = tmp_pathspec;
- tmp_pathspec = 0;
-
-- LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-- target_name));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(main) libtool target name: %s\n",
-+ target_name);
- EOF
-
- cat <<EOF
-@@ -3664,35 +4503,19 @@
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
- lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
- lt_setenv ("DUALCASE", "1"); /* for MSK sh */
-- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
-+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
-+ because on Windows, both *_VARNAMEs are PATH but uninstalled
-+ libraries must come first. */
- lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -10423,7 +11078,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
-- newargc=0;
-- for (i = 1; i < argc; i++)
-- {
-- if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-- {
-- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-- namespace, but it is not one of the ones we know about and
-- have already dealt with, above (inluding dump-script), then
-- report an error. Otherwise, targets might begin to believe
-- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-- namespace. The first time any user complains about this, we'll
-- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-- or a configure.ac-settable value.
-- */
-- lt_fatal ("Unrecognized option in %s namespace: '%s'",
-- ltwrapper_option_prefix, argv[i]);
-- }
-- /* otherwise ... */
-- newargz[++newargc] = xstrdup (argv[i]);
-- }
-- newargz[++newargc] = NULL;
--
-- LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
-+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-+ nonnull (lt_argv_zero));
- for (i = 0; i < newargc; i++)
- {
-- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
-+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-+ i, nonnull (newargz[i]));
- }
+@@ -11263,10 +11918,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
- EOF
-@@ -3706,7 +4529,9 @@
- if (rval == -1)
- {
- /* failed to start process */
-- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(main) failed to launch target \"%s\": %s\n",
-+ lt_argv_zero, nonnull (strerror (errno)));
- return 127;
- }
- return rval;
-@@ -3728,7 +4553,7 @@
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
{
- void *p = (void *) malloc (num);
- if (!p)
-- lt_fatal ("Memory exhausted");
-+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -11369,10 +12024,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
- return p;
- }
-@@ -3762,8 +4587,8 @@
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
{
- struct stat st;
-
-- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
-- path ? (*path ? path : "EMPTY!") : "NULL!"));
-+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-+ nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
-@@ -3780,8 +4605,8 @@
- int rval = 0;
- struct stat st;
-
-- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
-- path ? (*path ? path : "EMPTY!") : "NULL!"));
-+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-+ nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
-@@ -3807,8 +4632,8 @@
- int tmp_len;
- char *concat_name;
-
-- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
-- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
-+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-+ nonempty (wrapper));
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-@@ -3861,7 +4686,8 @@
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
-- lt_fatal ("getcwd failed");
-+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-+ nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name =
- XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-@@ -3886,7 +4712,8 @@
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
-- lt_fatal ("getcwd failed");
-+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-+ nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
-@@ -3912,8 +4739,9 @@
- int has_symlinks = 0;
- while (strlen (tmp_pathspec) && !has_symlinks)
- {
-- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-- tmp_pathspec));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "checking path component for symlinks: %s\n",
-+ tmp_pathspec);
- if (lstat (tmp_pathspec, &s) == 0)
- {
- if (S_ISLNK (s.st_mode) != 0)
-@@ -3935,8 +4763,9 @@
- }
- else
- {
-- char *errstr = strerror (errno);
-- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
-+ lt_fatal (__FILE__, __LINE__,
-+ "error accessing file \"%s\": %s",
-+ tmp_pathspec, nonnull (strerror (errno)));
- }
- }
- XFREE (tmp_pathspec);
-@@ -3949,7 +4778,8 @@
- tmp_pathspec = realpath (pathspec, buf);
- if (tmp_pathspec == 0)
- {
-- lt_fatal ("Could not follow symlinks for %s", pathspec);
-+ lt_fatal (__FILE__, __LINE__,
-+ "could not follow symlinks for %s", pathspec);
- }
- return xstrdup (tmp_pathspec);
- #endif
-@@ -3975,11 +4805,25 @@
- return str;
- }
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -15373,13 +16028,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+ lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+ lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+ lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+ reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+ reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+ OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+ deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+ file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+ AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+ AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+ STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+ RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+ old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+@@ -15394,14 +16056,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
+ lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+ objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+ MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+ lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+ need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+ DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+ NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+ LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+@@ -15434,12 +16099,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
+ hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+ inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+ link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
+ always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+ export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+ exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+ include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+ prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+ file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+ variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+ need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+@@ -15494,8 +16159,13 @@ reload_flag \
+ OBJDUMP \
+ deplibs_check_method \
+ file_magic_cmd \
++file_magic_glob \
++want_nocaseglob \
++DLLTOOL \
++sharedlib_from_linklib_cmd \
+ AR \
+ AR_FLAGS \
++archiver_list_spec \
+ STRIP \
+ RANLIB \
+ CC \
+@@ -15505,12 +16175,14 @@ lt_cv_sys_global_symbol_pipe \
+ lt_cv_sys_global_symbol_to_cdecl \
+ lt_cv_sys_global_symbol_to_c_name_address \
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
++nm_file_list_spec \
+ lt_prog_compiler_no_builtin_flag \
+-lt_prog_compiler_wl \
+ lt_prog_compiler_pic \
++lt_prog_compiler_wl \
+ lt_prog_compiler_static \
+ lt_cv_prog_compiler_c_o \
+ need_locks \
++MANIFEST_TOOL \
+ DSYMUTIL \
+ NMEDIT \
+ LIPO \
+@@ -15526,7 +16198,6 @@ no_undefined_flag \
+ hardcode_libdir_flag_spec \
+ hardcode_libdir_flag_spec_ld \
+ hardcode_libdir_separator \
+-fix_srcfile_path \
+ exclude_expsyms \
+ include_expsyms \
+ file_list_spec \
+@@ -15562,6 +16233,7 @@ module_cmds \
+ module_expsym_cmds \
+ export_symbols_cmds \
+ prelink_cmds \
++postlink_cmds \
+ postinstall_cmds \
+ postuninstall_cmds \
+ finish_cmds \
+@@ -16319,7 +16991,8 @@ $as_echo X"$file" |
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -16422,19 +17095,42 @@ SP2NL=$lt_lt_SP2NL
+ # turn newlines into spaces.
+ NL2SP=$lt_lt_NL2SP
-+void
-+lt_debugprintf (const char *file, int line, const char *fmt, ...)
-+{
-+ va_list args;
-+ if (lt_debug)
-+ {
-+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-+ va_start (args, fmt);
-+ (void) vfprintf (stderr, fmt, args);
-+ va_end (args);
-+ }
-+}
++# convert \$build file names to \$host format.
++to_host_file_cmd=$lt_cv_to_host_file_cmd
+
- static void
--lt_error_core (int exit_status, const char *mode,
-+lt_error_core (int exit_status, const char *file,
-+ int line, const char *mode,
- const char *message, va_list ap)
- {
-- fprintf (stderr, "%s: %s: ", program_name, mode);
-+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
++# convert \$build files to toolchain format.
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++
+ # An object symbol dumper.
+ OBJDUMP=$lt_OBJDUMP
-@@ -3988,20 +4832,32 @@
- }
+ # Method to check whether dependent libraries are shared objects.
+ deplibs_check_method=$lt_deplibs_check_method
- void
--lt_fatal (const char *message, ...)
-+lt_fatal (const char *file, int line, const char *message, ...)
- {
- va_list ap;
- va_start (ap, message);
-- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
- va_end (ap);
- }
+-# Command to use when deplibs_check_method == "file_magic".
++# Command to use when deplibs_check_method = "file_magic".
+ file_magic_cmd=$lt_file_magic_cmd
-+static const char *
-+nonnull (const char *s)
-+{
-+ return s ? s : "(null)";
-+}
++# How to find potential files when deplibs_check_method = "file_magic".
++file_magic_glob=$lt_file_magic_glob
+
-+static const char *
-+nonempty (const char *s)
-+{
-+ return (s && !*s) ? "(empty)" : nonnull (s);
-+}
++# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
++want_nocaseglob=$lt_want_nocaseglob
+
- void
- lt_setenv (const char *name, const char *value)
- {
-- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-- (name ? name : "<NULL>"),
-- (value ? value : "<NULL>")));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(lt_setenv) setting '%s' to '%s'\n",
-+ nonnull (name), nonnull (value));
- {
- #ifdef HAVE_SETENV
- /* always make a copy, for consistency with !HAVE_SETENV */
-@@ -4049,9 +4905,9 @@
- void
- lt_update_exe_path (const char *name, const char *value)
- {
-- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-- (name ? name : "<NULL>"),
-- (value ? value : "<NULL>")));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-+ nonnull (name), nonnull (value));
++# DLL creation program.
++DLLTOOL=$lt_DLLTOOL
++
++# Command to associate shared and link libraries.
++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
++
+ # The archiver.
+ AR=$lt_AR
++
++# Flags to create an archive.
+ AR_FLAGS=$lt_AR_FLAGS
- if (name && *name && value && *value)
- {
-@@ -4070,9 +4926,9 @@
- void
- lt_update_lib_path (const char *name, const char *value)
- {
-- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-- (name ? name : "<NULL>"),
-- (value ? value : "<NULL>")));
-+ lt_debugprintf (__FILE__, __LINE__,
-+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-+ nonnull (name), nonnull (value));
++# How to feed a file listing to the archiver.
++archiver_list_spec=$lt_archiver_list_spec
++
+ # A symbol stripping program.
+ STRIP=$lt_STRIP
- if (name && *name && value && *value)
- {
-@@ -4222,7 +5078,7 @@
- func_win32_import_lib_p ()
- {
- $opt_debug
-- case `eval "$file_magic_cmd \"\$1\" 2>/dev/null" | $SED -e 10q` in
-+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
- *import*) : ;;
- *) false ;;
- esac
-@@ -4401,9 +5257,9 @@
- ;;
- *)
- if test "$prev" = dlfiles; then
-- dlfiles="$dlfiles $arg"
-+ func_append dlfiles " $arg"
- else
-- dlprefiles="$dlprefiles $arg"
-+ func_append dlprefiles " $arg"
- fi
- prev=
- continue
-@@ -4427,7 +5283,7 @@
- *-*-darwin*)
- case "$deplibs " in
- *" $qarg.ltframework "*) ;;
-- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
-+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
- ;;
- esac
- ;;
-@@ -4446,7 +5302,7 @@
- moreargs=
- for fil in `cat "$save_arg"`
- do
--# moreargs="$moreargs $fil"
-+# func_append moreargs " $fil"
- arg=$fil
- # A libtool-controlled object.
+@@ -16464,6 +17160,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+ # Transform the output of nm in a C name address pair when lib prefix is needed.
+ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-@@ -4475,7 +5331,7 @@
++# Specify filename containing input files for \$NM.
++nm_file_list_spec=$lt_nm_file_list_spec
++
++# The root where to search for dependent libraries,and in which our libraries should be installed.
++lt_sysroot=$lt_sysroot
++
+ # The name of the directory that contains temporary libtool files.
+ objdir=$objdir
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-- dlfiles="$dlfiles $pic_object"
-+ func_append dlfiles " $pic_object"
- prev=
- continue
- else
-@@ -4487,7 +5343,7 @@
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
-- dlprefiles="$dlprefiles $pic_object"
-+ func_append dlprefiles " $pic_object"
- prev=
- fi
+@@ -16473,6 +17175,9 @@ MAGIC_CMD=$MAGIC_CMD
+ # Must we lock files when doing compilation?
+ need_locks=$lt_need_locks
-@@ -4557,12 +5413,12 @@
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
-- *) rpath="$rpath $arg" ;;
-+ *) func_append rpath " $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
-- *) xrpath="$xrpath $arg" ;;
-+ *) func_append xrpath " $arg" ;;
- esac
- fi
- prev=
-@@ -4574,28 +5430,28 @@
- continue
- ;;
- weak)
-- weak_libs="$weak_libs $arg"
-+ func_append weak_libs " $arg"
- prev=
- continue
- ;;
- xcclinker)
-- linker_flags="$linker_flags $qarg"
-- compiler_flags="$compiler_flags $qarg"
-+ func_append linker_flags " $qarg"
-+ func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xcompiler)
-- compiler_flags="$compiler_flags $qarg"
-+ func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xlinker)
-- linker_flags="$linker_flags $qarg"
-- compiler_flags="$compiler_flags $wl$qarg"
-+ func_append linker_flags " $qarg"
-+ func_append compiler_flags " $wl$qarg"
- prev=
- func_append compile_command " $wl$qarg"
- func_append finalize_command " $wl$qarg"
-@@ -4686,15 +5542,16 @@
- ;;
++# Manifest tool.
++MANIFEST_TOOL=$lt_MANIFEST_TOOL
++
+ # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+ DSYMUTIL=$lt_DSYMUTIL
- -L*)
-- func_stripname '-L' '' "$arg"
-- dir=$func_stripname_result
-- if test -z "$dir"; then
-+ func_stripname "-L" '' "$arg"
-+ if test -z "$func_stripname_result"; then
- if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
- else
- func_fatal_error "need path for \`-L' option"
- fi
- fi
-+ func_resolve_sysroot "$func_stripname_result"
-+ dir=$func_resolve_sysroot_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
-@@ -4706,10 +5563,16 @@
- ;;
- esac
- case "$deplibs " in
-- *" -L$dir "*) ;;
-+ *" -L$dir "* | *" $arg "*)
-+ # Will only happen for absolute or sysroot arguments
-+ ;;
- *)
-- deplibs="$deplibs -L$dir"
-- lib_search_path="$lib_search_path $dir"
-+ # Preserve sysroot, but never include relative directories
-+ case $dir in
-+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
-+ *) func_append deplibs " -L$dir" ;;
-+ esac
-+ func_append lib_search_path " $dir"
- ;;
- esac
- case $host in
-@@ -4718,12 +5581,12 @@
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- ::) dllsearchpath=$dir;;
-- *) dllsearchpath="$dllsearchpath:$dir";;
-+ *) func_append dllsearchpath ":$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
-- *) dllsearchpath="$dllsearchpath:$testbindir";;
-+ *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
-@@ -4747,7 +5610,7 @@
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
-- deplibs="$deplibs System.ltframework"
-+ func_append deplibs " System.ltframework"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
-@@ -4758,9 +5621,6 @@
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
-- *-*-linux*)
-- test "X$arg" = "X-lc" && continue
-- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
-@@ -4770,7 +5630,7 @@
- ;;
- esac
- fi
-- deplibs="$deplibs $arg"
-+ func_append deplibs " $arg"
- continue
- ;;
+@@ -16587,12 +17292,12 @@ with_gcc=$GCC
+ # Compiler flag to turn off builtin functions.
+ no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-@@ -4782,8 +5642,8 @@
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- # Darwin uses the -arch flag to determine output architecture.
-- -model|-arch|-isysroot)
-- compiler_flags="$compiler_flags $arg"
-+ -model|-arch|-isysroot|--sysroot)
-+ func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- prev=xcompiler
-@@ -4791,12 +5651,12 @@
- ;;
+-# How to pass a linker flag through the compiler.
+-wl=$lt_lt_prog_compiler_wl
+-
+ # Additional compiler flags for building library objects.
+ pic_flag=$lt_lt_prog_compiler_pic
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-- compiler_flags="$compiler_flags $arg"
-+ func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- case "$new_inherited_linker_flags " in
- *" $arg "*) ;;
-- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
-+ * ) func_append new_inherited_linker_flags " $arg" ;;
- esac
- continue
- ;;
-@@ -4863,13 +5723,17 @@
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
-+ =*)
-+ func_stripname '=' '' "$dir"
-+ dir=$lt_sysroot$func_stripname_result
-+ ;;
- *)
- func_fatal_error "only absolute run-paths are allowed"
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
-- *) xrpath="$xrpath $dir" ;;
-+ *) func_append xrpath " $dir" ;;
- esac
- continue
- ;;
-@@ -4922,8 +5786,8 @@
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
-- arg="$arg $func_quote_for_eval_result"
-- compiler_flags="$compiler_flags $func_quote_for_eval_result"
-+ func_append arg " $func_quote_for_eval_result"
-+ func_append compiler_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
-@@ -4938,9 +5802,9 @@
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
-- arg="$arg $wl$func_quote_for_eval_result"
-- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-- linker_flags="$linker_flags $func_quote_for_eval_result"
-+ func_append arg " $wl$func_quote_for_eval_result"
-+ func_append compiler_flags " $wl$func_quote_for_eval_result"
-+ func_append linker_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
-@@ -4968,24 +5832,27 @@
- arg="$func_quote_for_eval_result"
- ;;
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
+ # Compiler flag to prevent dynamic linking.
+ link_static_flag=$lt_lt_prog_compiler_static
-- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-- # -r[0-9][0-9]* specifies the processor on the SGI compiler
-- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-- # +DA*, +DD* enable 64-bit mode on the HP compiler
-- # -q* pass through compiler args for the IBM compiler
-- # -m*, -t[45]*, -txscale* pass through architecture-specific
-- # compiler args for GCC
-- # -F/path gives path to uninstalled frameworks, gcc on darwin
-- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-- # @file GCC response files
-- # -tp=* Portland pgcc target processor selection
-+ # Flags to be passed through unchanged, with rationale:
-+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
-+ # -r[0-9][0-9]* specify processor for the SGI compiler
-+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-+ # +DA*, +DD* enable 64-bit mode for the HP compiler
-+ # -q* compiler args for the IBM compiler
-+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-+ # -F/path path to uninstalled frameworks, gcc on darwin
-+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
-+ # @file GCC response files
-+ # -tp=* Portland pgcc target processor selection
-+ # --sysroot=* for sysroot support
-+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*)
-+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
-- compiler_flags="$compiler_flags $arg"
-+ func_append compiler_flags " $arg"
- continue
- ;;
-
-@@ -4997,7 +5864,7 @@
-
- *.$objext)
- # A standard object.
-- objs="$objs $arg"
-+ func_append objs " $arg"
- ;;
-
- *.lo)
-@@ -5028,7 +5895,7 @@
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-- dlfiles="$dlfiles $pic_object"
-+ func_append dlfiles " $pic_object"
- prev=
- continue
- else
-@@ -5040,7 +5907,7 @@
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
-- dlprefiles="$dlprefiles $pic_object"
-+ func_append dlprefiles " $pic_object"
- prev=
- fi
-
-@@ -5085,24 +5952,25 @@
-
- *.$libext)
- # An archive.
-- deplibs="$deplibs $arg"
-- old_deplibs="$old_deplibs $arg"
-+ func_append deplibs " $arg"
-+ func_append old_deplibs " $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
-+ func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
-- dlfiles="$dlfiles $arg"
-+ func_append dlfiles " $func_resolve_sysroot_result"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
-- dlprefiles="$dlprefiles $arg"
-+ func_append dlprefiles " $func_resolve_sysroot_result"
- prev=
- else
-- deplibs="$deplibs $arg"
-+ func_append deplibs " $func_resolve_sysroot_result"
- fi
- continue
- ;;
-@@ -5127,7 +5995,7 @@
- func_fatal_help "the \`$prevarg' option requires an argument"
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-- eval "arg=\"$export_dynamic_flag_spec\""
-+ eval arg=\"$export_dynamic_flag_spec\"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- fi
-@@ -5144,11 +6012,13 @@
- else
- shlib_search_path=
- fi
-- eval "sys_lib_search_path=\"$sys_lib_search_path_spec\""
-- eval "sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\""
-+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+@@ -16679,9 +17384,6 @@ inherit_rpath=$inherit_rpath
+ # Whether libtool must link a program against all its dependency libraries.
+ link_all_deplibs=$link_all_deplibs
- func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
-+ func_to_tool_file "$output_objdir/"
-+ tool_output_objdir=$func_to_tool_file_result
- # Create the object directory.
- func_mkdir_p "$output_objdir"
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path=$lt_fix_srcfile_path
+-
+ # Set to "yes" if exported symbols are required.
+ always_export_symbols=$always_export_symbols
-@@ -5169,12 +6039,12 @@
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
-- if $opt_duplicate_deps ; then
-+ if $opt_preserve_dup_deps ; then
- case "$libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
-- libs="$libs $deplib"
-+ func_append libs " $deplib"
- done
+@@ -16697,6 +17399,9 @@ include_expsyms=$lt_include_expsyms
+ # Commands necessary for linking programs (against libraries) with templates.
+ prelink_cmds=$lt_prelink_cmds
- if test "$linkmode" = lib; then
-@@ -5187,9 +6057,9 @@
- if $opt_duplicate_compiler_generated_deps; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
-- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
- esac
-- pre_post_deps="$pre_post_deps $pre_post_dep"
-+ func_append pre_post_deps " $pre_post_dep"
- done
- fi
- pre_post_deps=
-@@ -5256,8 +6126,9 @@
- for lib in $dlprefiles; do
- # Ignore non-libtool-libs
- dependency_libs=
-+ func_resolve_sysroot "$lib"
- case $lib in
-- *.la) func_source "$lib" ;;
-+ *.la) func_source "$func_resolve_sysroot_result" ;;
- esac
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds
++
+ # Specify filename containing input files.
+ file_list_spec=$lt_file_list_spec
- # Collect preopened libtool deplibs, except any this library
-@@ -5267,7 +6138,7 @@
- deplib_base=$func_basename_result
- case " $weak_libs " in
- *" $deplib_base "*) ;;
-- *) deplibs="$deplibs $deplib" ;;
-+ *) func_append deplibs " $deplib" ;;
- esac
- done
- done
-@@ -5288,11 +6159,11 @@
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
-- compiler_flags="$compiler_flags $deplib"
-+ func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
-- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-+ * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
-@@ -5377,7 +6248,7 @@
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
-- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-+ * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
-@@ -5390,7 +6261,8 @@
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- func_stripname '-L' '' "$deplib"
-- newlib_search_path="$newlib_search_path $func_stripname_result"
-+ func_resolve_sysroot "$func_stripname_result"
-+ func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- prog)
- if test "$pass" = conv; then
-@@ -5404,7 +6276,8 @@
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- func_stripname '-L' '' "$deplib"
-- newlib_search_path="$newlib_search_path $func_stripname_result"
-+ func_resolve_sysroot "$func_stripname_result"
-+ func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- *)
- func_warning "\`-L' is ignored for archives/objects"
-@@ -5415,17 +6288,21 @@
- -R*)
- if test "$pass" = link; then
- func_stripname '-R' '' "$deplib"
-- dir=$func_stripname_result
-+ func_resolve_sysroot "$func_stripname_result"
-+ dir=$func_resolve_sysroot_result
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
-- *) xrpath="$xrpath $dir" ;;
-+ *) func_append xrpath " $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
-- *.la) lib="$deplib" ;;
-+ *.la)
-+ func_resolve_sysroot "$deplib"
-+ lib=$func_resolve_sysroot_result
-+ ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
-@@ -5488,11 +6365,11 @@
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
-- newdlprefiles="$newdlprefiles $deplib"
-+ func_append newdlprefiles " $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
-- newdlfiles="$newdlfiles $deplib"
-+ func_append newdlfiles " $deplib"
- fi
- fi
- continue
-@@ -5538,7 +6415,7 @@
- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
- case " $new_inherited_linker_flags " in
- *" $tmp_inherited_linker_flag "*) ;;
-- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
-+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
- esac
- done
- fi
-@@ -5546,8 +6423,8 @@
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-+ test -n "$dlopen" && func_append dlfiles " $dlopen"
-+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
- fi
-
- if test "$pass" = conv; then
-@@ -5558,20 +6435,20 @@
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
- # It is a libtool convenience library, so add in its objects.
-- convenience="$convenience $ladir/$objdir/$old_library"
-- old_convenience="$old_convenience $ladir/$objdir/$old_library"
-+ func_append convenience " $ladir/$objdir/$old_library"
-+ func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
- fi
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
-- if $opt_duplicate_deps ; then
-+ if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
-- tmp_libs="$tmp_libs $deplib"
-+ func_append tmp_libs " $deplib"
- done
- continue
- fi # $pass = conv
-@@ -5579,9 +6456,15 @@
-
- # Get the name of the library we link against.
- linklib=
-- for l in $old_library $library_names; do
-- linklib="$l"
-- done
-+ if test -n "$old_library" &&
-+ { test "$prefer_static_libs" = yes ||
-+ test "$prefer_static_libs,$installed" = "built,no"; }; then
-+ linklib=$old_library
-+ else
-+ for l in $old_library $library_names; do
-+ linklib="$l"
-+ done
-+ fi
- if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
-@@ -5598,9 +6481,9 @@
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
-- dlprefiles="$dlprefiles $lib $dependency_libs"
-+ func_append dlprefiles " $lib $dependency_libs"
- else
-- newdlfiles="$newdlfiles $lib"
-+ func_append newdlfiles " $lib"
- fi
- continue
- fi # $pass = dlopen
-@@ -5622,14 +6505,14 @@
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
-- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
-- dir="$libdir"
-- absdir="$libdir"
-+ dir="$lt_sysroot$libdir"
-+ absdir="$lt_sysroot$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
-@@ -5637,12 +6520,12 @@
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
-- notinst_path="$notinst_path $abs_ladir"
-+ func_append notinst_path " $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
-- notinst_path="$notinst_path $abs_ladir"
-+ func_append notinst_path " $abs_ladir"
- fi
- fi # $installed = yes
- func_stripname 'lib' '.la' "$laname"
-@@ -5653,20 +6536,46 @@
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
- fi
-- # Prefer using a static library (so that no silly _DYNAMIC symbols
-- # are required to link).
-- if test -n "$old_library"; then
-- newdlprefiles="$newdlprefiles $dir/$old_library"
-- # Keep a list of preopened convenience libraries to check
-- # that they are being used correctly in the link pass.
-- test -z "$libdir" && \
-- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-- # Otherwise, use the dlname, so that lt_dlopen finds it.
-- elif test -n "$dlname"; then
-- newdlprefiles="$newdlprefiles $dir/$dlname"
-- else
-- newdlprefiles="$newdlprefiles $dir/$linklib"
-- fi
-+ case "$host" in
-+ # special handling for platforms with PE-DLLs.
-+ *cygwin* | *mingw* | *cegcc* )
-+ # Linker will automatically link against shared library if both
-+ # static and shared are present. Therefore, ensure we extract
-+ # symbols from the import library if a shared library is present
-+ # (otherwise, the dlopen module name will be incorrect). We do
-+ # this by putting the import library name into $newdlprefiles.
-+ # We recover the dlopen module name by 'saving' the la file
-+ # name in a special purpose variable, and (later) extracting the
-+ # dlname from the la file.
-+ if test -n "$dlname"; then
-+ func_tr_sh "$dir/$linklib"
-+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
-+ func_append newdlprefiles " $dir/$linklib"
-+ else
-+ func_append newdlprefiles " $dir/$old_library"
-+ # Keep a list of preopened convenience libraries to check
-+ # that they are being used correctly in the link pass.
-+ test -z "$libdir" && \
-+ func_append dlpreconveniencelibs " $dir/$old_library"
-+ fi
-+ ;;
-+ * )
-+ # Prefer using a static library (so that no silly _DYNAMIC symbols
-+ # are required to link).
-+ if test -n "$old_library"; then
-+ func_append newdlprefiles " $dir/$old_library"
-+ # Keep a list of preopened convenience libraries to check
-+ # that they are being used correctly in the link pass.
-+ test -z "$libdir" && \
-+ func_append dlpreconveniencelibs " $dir/$old_library"
-+ # Otherwise, use the dlname, so that lt_dlopen finds it.
-+ elif test -n "$dlname"; then
-+ func_append newdlprefiles " $dir/$dlname"
-+ else
-+ func_append newdlprefiles " $dir/$linklib"
-+ fi
-+ ;;
-+ esac
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
-@@ -5684,7 +6593,7 @@
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
-- newlib_search_path="$newlib_search_path $ladir"
-+ func_append newlib_search_path " $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
-@@ -5697,7 +6606,8 @@
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
-- newlib_search_path="$newlib_search_path $func_stripname_result"
-+ func_resolve_sysroot "$func_stripname_result"
-+ func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- esac
- # Need to link against all dependency_libs?
-@@ -5708,12 +6618,12 @@
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
-- if $opt_duplicate_deps ; then
-+ if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
-- tmp_libs="$tmp_libs $deplib"
-+ func_append tmp_libs " $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-@@ -5728,7 +6638,7 @@
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
- *"$absdir:"*) ;;
-- *) temp_rpath="$temp_rpath$absdir:" ;;
-+ *) func_append temp_rpath "$absdir:" ;;
- esac
- fi
-
-@@ -5740,7 +6650,7 @@
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
-- *) compile_rpath="$compile_rpath $absdir"
-+ *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
-@@ -5749,7 +6659,7 @@
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
-- *) finalize_rpath="$finalize_rpath $libdir"
-+ *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
-@@ -5774,12 +6684,12 @@
- case $host in
- *cygwin* | *mingw* | *cegcc*)
- # No point in relinking DLLs because paths are not encoded
-- notinst_deplibs="$notinst_deplibs $lib"
-+ func_append notinst_deplibs " $lib"
- need_relink=no
- ;;
- *)
- if test "$installed" = no; then
-- notinst_deplibs="$notinst_deplibs $lib"
-+ func_append notinst_deplibs " $lib"
- need_relink=yes
- fi
- ;;
-@@ -5814,7 +6724,7 @@
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
-- *) compile_rpath="$compile_rpath $absdir"
-+ *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
-@@ -5823,7 +6733,7 @@
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
-- *) finalize_rpath="$finalize_rpath $libdir"
-+ *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
-@@ -5835,7 +6745,7 @@
- shift
- realname="$1"
- shift
-- eval "libname=\"$libname_spec\""
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
-@@ -5848,7 +6758,7 @@
- versuffix="-$major"
- ;;
- esac
-- eval "soname=\"$soname_spec\""
-+ eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-@@ -5877,7 +6787,7 @@
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
-- if test "$linkmode" = prog || test "$mode" != relink; then
-+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
-@@ -5933,7 +6843,7 @@
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
-- add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
-@@ -5955,7 +6865,7 @@
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
-- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
-@@ -5969,13 +6879,13 @@
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
-- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- fi
- fi
- fi
-
-- if test "$linkmode" = prog || test "$mode" = relink; then
-+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
-@@ -5989,7 +6899,7 @@
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
-- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-+ *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
-@@ -6001,12 +6911,12 @@
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
-- add_dir="-L$libdir"
-+ add_dir="-L$lt_sysroot$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
-- add_dir="$add_dir -L$inst_prefix_dir$libdir"
-+ func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
-@@ -6083,27 +6993,33 @@
- temp_xrpath=$func_stripname_result
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
-- *) xrpath="$xrpath $temp_xrpath";;
-+ *) func_append xrpath " $temp_xrpath";;
- esac;;
-- *) temp_deplibs="$temp_deplibs $libdir";;
-+ *) func_append temp_deplibs " $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
-- newlib_search_path="$newlib_search_path $absdir"
-+ func_append newlib_search_path " $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
-- if $opt_duplicate_deps ; then
-+ case $deplib in
-+ -L*) func_stripname '-L' '' "$deplib"
-+ func_resolve_sysroot "$func_stripname_result";;
-+ *) func_resolve_sysroot "$deplib" ;;
-+ esac
-+ if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
-- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-+ *" $func_resolve_sysroot_result "*)
-+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
- esac
- fi
-- tmp_libs="$tmp_libs $deplib"
-+ func_append tmp_libs " $func_resolve_sysroot_result"
- done
-
- if test "$link_all_deplibs" != no; then
-@@ -6113,8 +7029,10 @@
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
-+ func_resolve_sysroot "$deplib"
-+ deplib=$func_resolve_sysroot_result
- func_dirname "$deplib" "" "."
-- dir="$func_dirname_result"
-+ dir=$func_dirname_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-@@ -6130,7 +7048,7 @@
- case $host in
- *-*-darwin*)
- depdepl=
-- deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
-@@ -6141,8 +7059,8 @@
- if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
- fi
-- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
-+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
- path=
- fi
- fi
-@@ -6152,7 +7070,7 @@
- ;;
- esac
- else
-- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
- test "$absdir" != "$libdir" && \
-@@ -6192,7 +7110,7 @@
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
-- *) lib_search_path="$lib_search_path $dir" ;;
-+ *) func_append lib_search_path " $dir" ;;
- esac
- done
- newlib_search_path=
-@@ -6205,7 +7123,7 @@
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
-- eval tmp_libs=\$$var
-+ eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
-@@ -6250,13 +7168,13 @@
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
-- *) tmp_libs="$tmp_libs $deplib" ;;
-+ *) func_append tmp_libs " $deplib" ;;
- esac
- ;;
-- *) tmp_libs="$tmp_libs $deplib" ;;
-+ *) func_append tmp_libs " $deplib" ;;
- esac
- done
-- eval $var=\$tmp_libs
-+ eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
-@@ -6269,7 +7187,7 @@
- ;;
- esac
- if test -n "$i" ; then
-- tmp_libs="$tmp_libs $i"
-+ func_append tmp_libs " $i"
- fi
- done
- dependency_libs=$tmp_libs
-@@ -6310,7 +7228,7 @@
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
-- objs="$objs$old_deplibs"
-+ func_append objs "$old_deplibs"
- ;;
-
- lib)
-@@ -6319,8 +7237,8 @@
- lib*)
- func_stripname 'lib' '.la' "$outputname"
- name=$func_stripname_result
-- eval "shared_ext=\"$shrext_cmds\""
-- eval "libname=\"$libname_spec\""
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval libname=\"$libname_spec\"
- ;;
- *)
- test "$module" = no && \
-@@ -6330,8 +7248,8 @@
- # Add the "lib" prefix for modules if required
- func_stripname '' '.la' "$outputname"
- name=$func_stripname_result
-- eval "shared_ext=\"$shrext_cmds\""
-- eval "libname=\"$libname_spec\""
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval libname=\"$libname_spec\"
- else
- func_stripname '' '.la' "$outputname"
- libname=$func_stripname_result
-@@ -6346,7 +7264,7 @@
- echo
- $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
- $ECHO "*** objects $objs is not portable!"
-- libobjs="$libobjs $objs"
-+ func_append libobjs " $objs"
- fi
- fi
-
-@@ -6544,7 +7462,7 @@
- done
-
- # Make executables depend on our current version.
-- verstring="$verstring:${current}.0"
-+ func_append verstring ":${current}.0"
- ;;
-
- qnx)
-@@ -6612,10 +7530,10 @@
- fi
-
- func_generate_dlsyms "$libname" "$libname" "yes"
-- libobjs="$libobjs $symfileobj"
-+ func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
-
-- if test "$mode" != relink; then
-+ if test "$opt_mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
-@@ -6631,7 +7549,7 @@
- continue
- fi
- fi
-- removelist="$removelist $p"
-+ func_append removelist " $p"
- ;;
- *) ;;
- esac
-@@ -6642,7 +7560,7 @@
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-+ func_append oldlibs " $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
-@@ -6659,10 +7577,11 @@
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
-- temp_xrpath="$temp_xrpath -R$libdir"
-+ func_replace_sysroot "$libdir"
-+ func_append temp_xrpath " -R$func_replace_sysroot_result"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
-- *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-@@ -6676,7 +7595,7 @@
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
-- *) dlfiles="$dlfiles $lib" ;;
-+ *) func_append dlfiles " $lib" ;;
- esac
- done
-
-@@ -6686,7 +7605,7 @@
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
-- *) dlprefiles="$dlprefiles $lib" ;;
-+ *) func_append dlprefiles " $lib" ;;
- esac
- done
-
-@@ -6698,7 +7617,7 @@
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
-- deplibs="$deplibs System.ltframework"
-+ func_append deplibs " System.ltframework"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
-@@ -6715,7 +7634,7 @@
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
-- deplibs="$deplibs -lc"
-+ func_append deplibs " -lc"
- fi
- ;;
- esac
-@@ -6764,18 +7683,18 @@
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
-- eval "libname=\"$libname_spec\""
-- eval "deplib_matches=\"$library_names_spec\""
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
-@@ -6789,7 +7708,7 @@
- fi
- ;;
- *)
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- ;;
- esac
- done
-@@ -6807,18 +7726,18 @@
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
-- eval "libname=\"$libname_spec\""
-- eval "deplib_matches=\"$library_names_spec\""
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
-@@ -6840,7 +7759,7 @@
- fi
- ;;
- *)
-- newdeplibs="$newdeplibs $i"
-+ func_append newdeplibs " $i"
- ;;
- esac
- done
-@@ -6857,15 +7776,27 @@
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
-- eval "libname=\"$libname_spec\""
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
-+ if test -n "$file_magic_glob"; then
-+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
-+ else
-+ libnameglob=$libname
-+ fi
-+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-+ if test "$want_nocaseglob" = yes; then
-+ shopt -s nocaseglob
-+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-+ $nocaseglob
-+ else
-+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-+ fi
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null |
-@@ -6885,10 +7816,10 @@
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
- esac
- done
-- if eval "$file_magic_cmd \"\$potlib\"" 2>/dev/null |
-+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
- $SED -e 10q |
- $EGREP "$file_magic_regex" > /dev/null; then
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
-@@ -6913,7 +7844,7 @@
- ;;
- *)
- # Add a -L argument.
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
-@@ -6929,20 +7860,20 @@
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
-- eval "libname=\"$libname_spec\""
-+ libname=`eval "\\$ECHO \"$libname_spec\""`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
- $EGREP "$match_pattern_regex" > /dev/null; then
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
-@@ -6967,7 +7898,7 @@
- ;;
- *)
- # Add a -L argument.
-- newdeplibs="$newdeplibs $a_deplib"
-+ func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
-@@ -7071,7 +8002,7 @@
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
-- new_libs="$new_libs -L$path/$objdir" ;;
-+ func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
-@@ -7081,10 +8012,10 @@
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
-- *) new_libs="$new_libs $deplib" ;;
-+ *) func_append new_libs " $deplib" ;;
- esac
- ;;
-- *) new_libs="$new_libs $deplib" ;;
-+ *) func_append new_libs " $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-@@ -7101,10 +8032,12 @@
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
-- test "$mode" != relink && rpath="$compile_rpath$rpath"
-+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
-+ func_replace_sysroot "$libdir"
-+ libdir=$func_replace_sysroot_result
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
-@@ -7113,18 +8046,18 @@
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
-- eval "flag=\"$hardcode_libdir_flag_spec\""
-- dep_rpath="$dep_rpath $flag"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ func_append dep_rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
-- *) perm_rpath="$perm_rpath $libdir" ;;
-+ *) func_apped perm_rpath " $libdir" ;;
- esac
- fi
- done
-@@ -7133,40 +8066,38 @@
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
-- eval "dep_rpath=\"$hardcode_libdir_flag_spec_ld\""
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
- else
-- eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
-+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
-- rpath="$rpath$dir:"
-+ func_append rpath "$dir:"
- done
-- eval $runpath_var=\$rpath\$$runpath_var
-- export $runpath_var
-+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
-- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
-- eval $shlibpath_var=\$shlibpath\$$shlibpath_var
-- export $shlibpath_var
-+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
-- eval "shared_ext=\"$shrext_cmds\""
-- eval "library_names=\"$library_names_spec\""
-+ eval shared_ext=\"$shrext_cmds\"
-+ eval library_names=\"$library_names_spec\"
- set dummy $library_names
- shift
- realname="$1"
- shift
-
- if test -n "$soname_spec"; then
-- eval "soname=\"$soname_spec\""
-+ eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-@@ -7178,7 +8109,7 @@
- linknames=
- for link
- do
-- linknames="$linknames $link"
-+ func_append linknames " $link"
- done
-
- # Use standard objects if they are pic
-@@ -7189,7 +8120,7 @@
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
-- delfiles="$delfiles $export_symbols"
-+ func_append delfiles " $export_symbols"
- fi
-
- orig_export_symbols=
-@@ -7220,13 +8151,45 @@
- $opt_dry_run || $RM $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
-- for cmd in $cmds; do
-+ for cmd1 in $cmds; do
- IFS="$save_ifs"
-- eval "cmd=\"$cmd\""
-- func_len " $cmd"
-- len=$func_len_result
-- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-+ # Take the normal branch if the nm_file_list_spec branch
-+ # doesn't work or if tool conversion is not needed.
-+ case $nm_file_list_spec~$to_tool_file_cmd in
-+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
-+ try_normal_branch=yes
-+ eval cmd=\"$cmd1\"
-+ func_len " $cmd"
-+ len=$func_len_result
-+ ;;
-+ *)
-+ try_normal_branch=no
-+ ;;
-+ esac
-+ if test "$try_normal_branch" = yes \
-+ && { test "$len" -lt "$max_cmd_len" \
-+ || test "$max_cmd_len" -le -1; }
-+ then
-+ func_show_eval "$cmd" 'exit $?'
-+ skipped_export=false
-+ elif test -n "$nm_file_list_spec"; then
-+ func_basename "$output"
-+ output_la=$func_basename_result
-+ save_libobjs=$libobjs
-+ save_output=$output
-+ output=${output_objdir}/${output_la}.nm
-+ func_to_tool_file "$output"
-+ libobjs=$nm_file_list_spec$func_to_tool_file_result
-+ func_append delfiles " $output"
-+ func_verbose "creating $NM input file list: $output"
-+ for obj in $save_libobjs; do
-+ func_to_tool_file "$obj"
-+ $ECHO "$func_to_tool_file_result"
-+ done > "$output"
-+ eval cmd=\"$cmd1\"
- func_show_eval "$cmd" 'exit $?'
-+ output=$save_output
-+ libobjs=$save_libobjs
- skipped_export=false
- else
- # The command line is too long to execute in one step.
-@@ -7248,7 +8211,7 @@
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"
-+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-@@ -7260,7 +8223,7 @@
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
-@@ -7270,7 +8233,7 @@
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
-- tmp_deplibs="$tmp_deplibs $test_deplib"
-+ func_append tmp_deplibs " $test_deplib"
- ;;
- esac
- done
-@@ -7286,43 +8249,43 @@
- fi
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
-- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\""
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- else
- gentop="$output_objdir/${outputname}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
-- libobjs="$libobjs $func_extract_archives_result"
-+ func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-- eval "flag=\"$thread_safe_flag_spec\""
-- linker_flags="$linker_flags $flag"
-+ eval flag=\"$thread_safe_flag_spec\"
-+ func_append linker_flags " $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
-- if test "$mode" = relink; then
-- $opt_dry_run || (cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U) || exit $?
-+ if test "$opt_mode" = relink; then
-+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-- eval "test_cmds=\"$module_expsym_cmds\""
-+ eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
-- eval "test_cmds=\"$module_cmds\""
-+ eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-- eval "test_cmds=\"$archive_expsym_cmds\""
-+ eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
-- eval "test_cmds=\"$archive_cmds\""
-+ eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-@@ -7366,10 +8329,13 @@
- echo 'INPUT (' > $output
- for obj in $save_libobjs
- do
-- $ECHO "$obj" >> $output
-+ func_to_tool_file "$obj"
-+ $ECHO "$func_to_tool_file_result" >> $output
- done
- echo ')' >> $output
-- delfiles="$delfiles $output"
-+ func_append delfiles " $output"
-+ func_to_tool_file "$output"
-+ output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
- func_verbose "creating linker input file list: $output"
-@@ -7383,15 +8349,17 @@
- fi
- for obj
- do
-- $ECHO "$obj" >> $output
-+ func_to_tool_file "$obj"
-+ $ECHO "$func_to_tool_file_result" >> $output
- done
-- delfiles="$delfiles $output"
-- output=$firstobj\"$file_list_spec$output\"
-+ func_append delfiles " $output"
-+ func_to_tool_file "$output"
-+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
- else
- if test -n "$save_libobjs"; then
- func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
-- eval "test_cmds=\"$reload_cmds\""
-+ eval test_cmds=\"$reload_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
-@@ -7411,12 +8379,12 @@
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- reload_objs=$objlist
-- eval "concat_cmds=\"$reload_cmds\""
-+ eval concat_cmds=\"$reload_cmds\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- reload_objs="$objlist $last_robj"
-- eval "concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\""
-+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- func_arith $k + 1
-@@ -7433,11 +8401,11 @@
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- reload_objs="$objlist $last_robj"
-- eval "concat_cmds=\"\${concat_cmds}$reload_cmds\""
-+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
- if test -n "$last_robj"; then
-- eval "concat_cmds=\"\${concat_cmds}~\$RM $last_robj\""
-+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
- fi
-- delfiles="$delfiles $output"
-+ func_append delfiles " $output"
-
- else
- output=
-@@ -7450,9 +8418,9 @@
- libobjs=$output
- # Append the command to create the export file.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-- eval "concat_cmds=\"\$concat_cmds$export_symbols_cmds\""
-+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
- if test -n "$last_robj"; then
-- eval "concat_cmds=\"\$concat_cmds~\$RM $last_robj\""
-+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
- fi
- fi
-
-@@ -7471,7 +8439,7 @@
- lt_exit=$?
-
- # Restore the uninstalled library and exit
-- if test "$mode" = relink; then
-+ if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
-@@ -7492,7 +8460,7 @@
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"
-+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test -n "$orig_export_symbols"; then
-@@ -7504,7 +8472,7 @@
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
-@@ -7515,7 +8483,7 @@
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\""
-+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- fi
- # Expand the library linking commands again to reset the
-@@ -7539,23 +8507,23 @@
-
- if test -n "$delfiles"; then
- # Append the command to remove temporary files to $cmds.
-- eval "cmds=\"\$cmds~\$RM $delfiles\""
-+ eval cmds=\"\$cmds~\$RM $delfiles\"
- fi
-
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
-- libobjs="$libobjs $func_extract_archives_result"
-+ func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
-
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
-- eval "cmd=\"$cmd\""
-+ eval cmd=\"$cmd\"
- $opt_silent || {
- func_quote_for_expand "$cmd"
- eval "func_echo $func_quote_for_expand_result"
-@@ -7564,7 +8532,7 @@
- lt_exit=$?
-
- # Restore the uninstalled library and exit
-- if test "$mode" = relink; then
-+ if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
-@@ -7576,8 +8544,8 @@
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
-- if test "$mode" = relink; then
-- $opt_dry_run || (cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname) || exit $?
-+ if test "$opt_mode" = relink; then
-+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
-@@ -7656,17 +8624,20 @@
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
-- eval "tmp_whole_archive_flags=\"$whole_archive_flag_spec\""
-+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
- else
- gentop="$output_objdir/${obj}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
-+ # If we're not building shared, we need to use non_pic_objs
-+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-+
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-@@ -7690,7 +8661,7 @@
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
-- # $opt_dry_run || echo timestamp > $libobj || exit $?
-+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
-@@ -7740,8 +8711,8 @@
- if test "$tagname" = CXX ; then
- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
- 10.[0123])
-- compile_command="$compile_command ${wl}-bind_at_load"
-- finalize_command="$finalize_command ${wl}-bind_at_load"
-+ func_append compile_command " ${wl}-bind_at_load"
-+ func_append finalize_command " ${wl}-bind_at_load"
- ;;
- esac
- fi
-@@ -7761,7 +8732,7 @@
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
-- new_libs="$new_libs -L$path/$objdir" ;;
-+ func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
-@@ -7771,17 +8742,17 @@
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
-- *) new_libs="$new_libs $deplib" ;;
-+ *) func_append new_libs " $deplib" ;;
- esac
- ;;
-- *) new_libs="$new_libs $deplib" ;;
-+ *) func_append new_libs " $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
-- compile_command="$compile_command $compile_deplibs"
-- finalize_command="$finalize_command $finalize_deplibs"
-+ func_append compile_command " $compile_deplibs"
-+ func_append finalize_command " $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
-@@ -7789,7 +8760,7 @@
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
-- *) finalize_rpath="$finalize_rpath $libdir" ;;
-+ *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- fi
-@@ -7808,18 +8779,18 @@
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
-- eval "flag=\"$hardcode_libdir_flag_spec\""
-- rpath="$rpath $flag"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
-- *) perm_rpath="$perm_rpath $libdir" ;;
-+ *) func_append perm_rpath " $libdir" ;;
- esac
- fi
- case $host in
-@@ -7828,12 +8799,12 @@
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- ::) dllsearchpath=$libdir;;
-- *) dllsearchpath="$dllsearchpath:$libdir";;
-+ *) func_append dllsearchpath ":$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
-- *) dllsearchpath="$dllsearchpath:$testbindir";;
-+ *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
-@@ -7842,7 +8813,7 @@
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
-- eval "rpath=\" $hardcode_libdir_flag_spec\""
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
-@@ -7859,18 +8830,18 @@
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
-- eval "flag=\"$hardcode_libdir_flag_spec\""
-- rpath="$rpath $flag"
-+ eval flag=\"$hardcode_libdir_flag_spec\"
-+ func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
-- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-+ *) func_append finalize_perm_rpath " $libdir" ;;
- esac
- fi
- done
-@@ -7878,7 +8849,7 @@
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
-- eval "rpath=\" $hardcode_libdir_flag_spec\""
-+ eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
-@@ -7921,6 +8892,12 @@
- exit_status=0
- func_show_eval "$link_command" 'exit_status=$?'
-
-+ if test -n "$postlink_cmds"; then
-+ func_to_tool_file "$output"
-+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-+ func_execute_cmds "$postlink_cmds" 'exit $?'
-+ fi
-+
- # Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-@@ -7943,7 +8920,7 @@
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
-- rpath="$rpath$dir:"
-+ func_append rpath "$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
-@@ -7951,7 +8928,7 @@
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
-- rpath="$rpath$dir:"
-+ func_append rpath "$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
-@@ -7966,6 +8943,13 @@
- $opt_dry_run || $RM $output
- # Link the executable and exit
- func_show_eval "$link_command" 'exit $?'
-+
-+ if test -n "$postlink_cmds"; then
-+ func_to_tool_file "$output"
-+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-+ func_execute_cmds "$postlink_cmds" 'exit $?'
-+ fi
-+
- exit $EXIT_SUCCESS
- fi
-
-@@ -7999,6 +8983,12 @@
-
- func_show_eval "$link_command" 'exit $?'
-
-+ if test -n "$postlink_cmds"; then
-+ func_to_tool_file "$output_objdir/$outputname"
-+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-+ func_execute_cmds "$postlink_cmds" 'exit $?'
-+ fi
-+
- # Now create the wrapper script.
- func_verbose "creating $output"
-
-@@ -8096,7 +9086,7 @@
- else
- oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
-- oldobjs="$oldobjs $symfileobj"
-+ func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
-@@ -8104,10 +9094,10 @@
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
-
- func_extract_archives $gentop $addlibs
-- oldobjs="$oldobjs $func_extract_archives_result"
-+ func_append oldobjs " $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
-@@ -8118,10 +9108,10 @@
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
-- oldobjs="$oldobjs $func_extract_archives_result"
-+ func_append oldobjs " $func_extract_archives_result"
- fi
-
- # POSIX demands no paths to be encoded in archives. We have
-@@ -8139,7 +9129,7 @@
- else
- echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
-- generated="$generated $gentop"
-+ func_append generated " $gentop"
- func_mkdir_p "$gentop"
- save_oldobjs=$oldobjs
- oldobjs=
-@@ -8163,18 +9153,28 @@
- esac
- done
- func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-- oldobjs="$oldobjs $gentop/$newobj"
-+ func_append oldobjs " $gentop/$newobj"
- ;;
-- *) oldobjs="$oldobjs $obj" ;;
-+ *) func_append oldobjs " $obj" ;;
- esac
- done
- fi
-- eval "cmds=\"$old_archive_cmds\""
-+ eval cmds=\"$old_archive_cmds\"
-
- func_len " $cmds"
- len=$func_len_result
- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
-+ elif test -n "$archiver_list_spec"; then
-+ func_verbose "using command file archive linking..."
-+ for obj in $oldobjs
-+ do
-+ func_to_tool_file "$obj"
-+ $ECHO "$func_to_tool_file_result"
-+ done > $output_objdir/$libname.libcmd
-+ func_to_tool_file "$output_objdir/$libname.libcmd"
-+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
-+ cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- func_verbose "using piecewise archive linking..."
-@@ -8189,7 +9189,7 @@
- do
- last_oldobj=$obj
- done
-- eval "test_cmds=\"$old_archive_cmds\""
-+ eval test_cmds=\"$old_archive_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
-@@ -8208,7 +9208,7 @@
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-- eval "concat_cmds=\"\${concat_cmds}$old_archive_cmds\""
-+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- len=$len0
- fi
-@@ -8216,9 +9216,9 @@
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
-- eval "cmds=\"\$concat_cmds\""
-+ eval cmds=\"\$concat_cmds\"
- else
-- eval "cmds=\"\$concat_cmds~\$old_archive_cmds\""
-+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
-@@ -8268,12 +9268,23 @@
- *.la)
- func_basename "$deplib"
- name="$func_basename_result"
-- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-+ func_resolve_sysroot "$deplib"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
-- newdependency_libs="$newdependency_libs $libdir/$name"
-+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
-+ ;;
-+ -L*)
-+ func_stripname -L '' "$deplib"
-+ func_replace_sysroot "$func_stripname_result"
-+ func_append newdependency_libs " -L$func_replace_sysroot_result"
- ;;
-- *) newdependency_libs="$newdependency_libs $deplib" ;;
-+ -R*)
-+ func_stripname -R '' "$deplib"
-+ func_replace_sysroot "$func_stripname_result"
-+ func_append newdependency_libs " -R$func_replace_sysroot_result"
-+ ;;
-+ *) func_append newdependency_libs " $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
-@@ -8284,12 +9295,14 @@
- *.la)
- func_basename "$lib"
- name="$func_basename_result"
-- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ func_resolve_sysroot "$lib"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+@@ -16729,210 +17434,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $* ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+-
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+-}
+-
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+- esac
+-}
+-
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[^=]*=//'
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$@"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+-
+-_LT_EOF
+-esac
+-
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1+=\$2"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1=\$$1\$2"
+-}
+-
+-_LT_EOF
+- ;;
+- esac
+-
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
-- newdlfiles="$newdlfiles $libdir/$name"
-+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
-- *) newdlfiles="$newdlfiles $lib" ;;
-+ *) func_append newdlfiles " $lib" ;;
- esac
- done
- dlfiles="$newdlfiles"
-@@ -8303,10 +9316,11 @@
- # the library:
- func_basename "$lib"
- name="$func_basename_result"
-- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-+ func_resolve_sysroot "$lib"
-+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
-- newdlprefiles="$newdlprefiles $libdir/$name"
-+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
- esac
- done
-@@ -8318,7 +9332,7 @@
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
-- newdlfiles="$newdlfiles $abs"
-+ func_append newdlfiles " $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
-@@ -8327,7 +9341,7 @@
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
-- newdlprefiles="$newdlprefiles $abs"
-+ func_append newdlprefiles " $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
-@@ -8412,7 +9426,7 @@
- exit $EXIT_SUCCESS
- }
-
--{ test "$mode" = link || test "$mode" = relink; } &&
-+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
-
-
-@@ -8432,9 +9446,9 @@
- for arg
- do
- case $arg in
-- -f) RM="$RM $arg"; rmforce=yes ;;
-- -*) RM="$RM $arg" ;;
-- *) files="$files $arg" ;;
-+ -f) func_append RM " $arg"; rmforce=yes ;;
-+ -*) func_append RM " $arg" ;;
-+ *) func_append files " $arg" ;;
- esac
- done
-
-@@ -8443,24 +9457,23 @@
-
- rmdirs=
-
-- origobjdir="$objdir"
- for file in $files; do
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
-- objdir="$origobjdir"
-+ odir="$objdir"
- else
-- objdir="$dir/$origobjdir"
-+ odir="$dir/$objdir"
- fi
- func_basename "$file"
- name="$func_basename_result"
-- test "$mode" = uninstall && objdir="$dir"
-+ test "$opt_mode" = uninstall && odir="$dir"
-
-- # Remember objdir for removal later, being careful to avoid duplicates
-- if test "$mode" = clean; then
-+ # Remember odir for removal later, being careful to avoid duplicates
-+ if test "$opt_mode" = clean; then
- case " $rmdirs " in
-- *" $objdir "*) ;;
-- *) rmdirs="$rmdirs $objdir" ;;
-+ *" $odir "*) ;;
-+ *) func_append rmdirs " $odir" ;;
- esac
- fi
-
-@@ -8486,18 +9499,17 @@
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
-- rmfiles="$rmfiles $objdir/$n"
-+ func_append rmfiles " $odir/$n"
- done
-- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
-
-- case "$mode" in
-+ case "$opt_mode" in
- clean)
-- case " $library_names " in
-- # " " in the beginning catches empty $dlname
-+ case " $library_names " in
- *" $dlname "*) ;;
-- *) rmfiles="$rmfiles $objdir/$dlname" ;;
-+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
- esac
-- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
-@@ -8525,19 +9537,19 @@
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
-- rmfiles="$rmfiles $dir/$pic_object"
-+ func_append rmfiles " $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
-- rmfiles="$rmfiles $dir/$non_pic_object"
-+ func_append rmfiles " $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
-- if test "$mode" = clean ; then
-+ if test "$opt_mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
-@@ -8547,7 +9559,7 @@
- noexename=$func_stripname_result
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
-- rmfiles="$rmfiles $file"
-+ func_append rmfiles " $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
-@@ -8556,7 +9568,7 @@
- func_ltwrapper_scriptname "$file"
- relink_command=
- func_source $func_ltwrapper_scriptname_result
-- rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
-+ func_append rmfiles " $func_ltwrapper_scriptname_result"
- else
- relink_command=
- func_source $dir/$noexename
-@@ -8564,12 +9576,12 @@
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
-- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
-- rmfiles="$rmfiles $objdir/lt-$name"
-+ func_append rmfiles " $odir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
-- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-+ func_append rmfiles " $odir/lt-${noexename}.c"
- fi
- fi
- fi
-@@ -8577,7 +9589,6 @@
- esac
- func_show_eval "$RM $rmfiles" 'exit_status=1'
- done
-- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
-@@ -8589,16 +9600,16 @@
- exit $exit_status
- }
-
--{ test "$mode" = uninstall || test "$mode" = clean; } &&
-+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
-
--test -z "$mode" && {
-+test -z "$opt_mode" && {
- help="$generic_help"
- func_fatal_help "you must specify a MODE"
- }
-
- test -z "$exec_cmd" && \
-- func_fatal_help "invalid operation mode \`$mode'"
-+ func_fatal_help "invalid operation mode \`$opt_mode'"
-
- if test -n "$exec_cmd"; then
- eval exec "$exec_cmd"
-Index: binutils-2.24/ltoptions.m4
-===================================================================
---- binutils-2.24.orig/ltoptions.m4 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/ltoptions.m4 2013-12-15 11:10:23.867118697 -0800
-@@ -8,7 +8,7 @@
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
-
--# serial 6 ltoptions.m4
-+# serial 7 ltoptions.m4
-
- # This is to help aclocal find these macros, as it can't see m4_define.
- AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-Index: binutils-2.24/ltversion.m4
-===================================================================
---- binutils-2.24.orig/ltversion.m4 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/ltversion.m4 2013-12-15 11:10:23.867118697 -0800
-@@ -7,17 +7,17 @@
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
-
--# Generated from ltversion.in.
-+# @configure_input@
-
--# serial 3134 ltversion.m4
-+# serial 3293 ltversion.m4
- # This file is part of GNU Libtool
-
--m4_define([LT_PACKAGE_VERSION], [2.2.7a])
--m4_define([LT_PACKAGE_REVISION], [1.3134])
-+m4_define([LT_PACKAGE_VERSION], [2.4])
-+m4_define([LT_PACKAGE_REVISION], [1.3293])
-
- AC_DEFUN([LTVERSION_VERSION],
--[macro_version='2.2.7a'
--macro_revision='1.3134'
-+[macro_version='2.4'
-+macro_revision='1.3293'
- _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
- _LT_DECL(, macro_revision, 0)
- ])
-Index: binutils-2.24/lt~obsolete.m4
-===================================================================
---- binutils-2.24.orig/lt~obsolete.m4 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/lt~obsolete.m4 2013-12-15 11:10:23.867118697 -0800
-@@ -7,7 +7,7 @@
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
-
--# serial 4 lt~obsolete.m4
-+# serial 5 lt~obsolete.m4
++ if test x"$xsi_shell" = xyes; then
++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
++func_dirname ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_basename ()$/,/^} # func_basename /c\
++func_basename ()\
++{\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
++func_dirname_and_basename ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
++func_stripname ()\
++{\
++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
++\ # positional parameters, so assign one to ordinary parameter first.\
++\ func_stripname_result=${3}\
++\ func_stripname_result=${func_stripname_result#"${1}"}\
++\ func_stripname_result=${func_stripname_result%"${2}"}\
++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
++func_split_long_opt ()\
++{\
++\ func_split_long_opt_name=${1%%=*}\
++\ func_split_long_opt_arg=${1#*=}\
++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
++func_split_short_opt ()\
++{\
++\ func_split_short_opt_arg=${1#??}\
++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
++func_lo2o ()\
++{\
++\ case ${1} in\
++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
++\ *) func_lo2o_result=${1} ;;\
++\ esac\
++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_xform ()$/,/^} # func_xform /c\
++func_xform ()\
++{\
++ func_xform_result=${1%.*}.lo\
++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_arith ()$/,/^} # func_arith /c\
++func_arith ()\
++{\
++ func_arith_result=$(( $* ))\
++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_len ()$/,/^} # func_len /c\
++func_len ()\
++{\
++ func_len_result=${#1}\
++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++fi
++
++if test x"$lt_shell_append" = xyes; then
++ sed -e '/^func_append ()$/,/^} # func_append /c\
++func_append ()\
++{\
++ eval "${1}+=\\${2}"\
++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
++func_append_quoted ()\
++{\
++\ func_quote_for_eval "${2}"\
++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
++fi
++
++
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
- # These exist entirely to fool aclocal when bootstrapping libtool.
- #
-Index: binutils-2.24/configure
-===================================================================
---- binutils-2.24.orig/configure 2013-12-15 11:09:51.000000000 -0800
-+++ binutils-2.24/configure 2013-12-15 11:10:23.870452030 -0800
-@@ -7921,7 +7921,7 @@
+diff --git a/configure b/configure
+index e9f2f13..cbccb18 100755
+--- a/configure
++++ b/configure
+@@ -8041,7 +8041,7 @@ case " $build_configdirs " in
# For an installed makeinfo, we require it to be from texinfo 4.7 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
@@ -7120,21 +3866,23 @@ Index: binutils-2.24/configure
:
else
MAKEINFO="$MISSING makeinfo"
-Index: binutils-2.24/bfd/configure
-===================================================================
---- binutils-2.24.orig/bfd/configure 2013-12-02 01:30:30.000000000 -0800
-+++ binutils-2.24/bfd/configure 2013-12-15 11:10:23.870452030 -0800
-@@ -668,6 +668,9 @@
+diff --git a/gas/configure b/gas/configure
+index e9ba550..074886f 100755
+--- a/gas/configure
++++ b/gas/configure
+@@ -645,8 +645,11 @@ OTOOL
LIPO
NMEDIT
DSYMUTIL
+MANIFEST_TOOL
+ RANLIB
+ac_ct_AR
+ AR
+DLLTOOL
OBJDUMP
LN_S
NM
-@@ -780,6 +783,7 @@
+@@ -757,6 +760,7 @@ enable_static
with_pic
enable_fast_install
with_gnu_ld
@@ -7142,16 +3890,16 @@ Index: binutils-2.24/bfd/configure
enable_libtool_lock
enable_plugins
enable_largefile
-@@ -1456,6 +1460,8 @@
+@@ -1422,6 +1426,8 @@ Optional Packages:
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
- --with-mmap try using mmap for BFD input files if available
- --with-separate-debug-dir=DIR
- Look for global separate debug info in DIR
-@@ -5386,8 +5392,8 @@
+ --with-zlib include zlib support (auto/yes/no) default=auto
+
+ Some influential environment variables:
+@@ -4901,8 +4907,8 @@ esac
@@ -7162,7 +3910,7 @@ Index: binutils-2.24/bfd/configure
-@@ -5427,7 +5433,7 @@
+@@ -4942,7 +4948,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
$as_echo_n "checking how to print strings... " >&6; }
# Test print first, because it will be a builtin if present.
@@ -7171,7 +3919,7 @@ Index: binutils-2.24/bfd/configure
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -6113,8 +6119,8 @@
+@@ -5628,8 +5634,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
@@ -7182,7 +3930,7 @@ Index: binutils-2.24/bfd/configure
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
-@@ -6163,6 +6169,80 @@
+@@ -5678,6 +5684,80 @@ esac
@@ -7263,7 +4011,7 @@ Index: binutils-2.24/bfd/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -6179,6 +6259,11 @@
+@@ -5694,6 +5774,11 @@ case $reload_flag in
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
@@ -7275,7 +4023,7 @@ Index: binutils-2.24/bfd/configure
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6347,7 +6432,8 @@
+@@ -5862,7 +5947,8 @@ mingw* | pw32*)
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -7285,7 +4033,7 @@ Index: binutils-2.24/bfd/configure
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-@@ -6501,6 +6587,21 @@
+@@ -6016,6 +6102,21 @@ esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
@@ -7307,7 +4055,7 @@ Index: binutils-2.24/bfd/configure
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6516,9 +6617,162 @@
+@@ -6031,9 +6132,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -7321,9 +4069,7 @@ Index: binutils-2.24/bfd/configure
+
+
+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
++if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -7464,7 +4210,9 @@ Index: binutils-2.24/bfd/configure
+
+
+
-+if test -n "$ac_tool_prefix"; then
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
@@ -7472,7 +4220,7 @@ Index: binutils-2.24/bfd/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6534,7 +6788,7 @@
+@@ -6049,7 +6303,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
@@ -7481,7 +4229,7 @@ Index: binutils-2.24/bfd/configure
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
-@@ -6554,11 +6808,15 @@
+@@ -6069,11 +6323,15 @@ $as_echo "no" >&6; }
fi
@@ -7500,7 +4248,7 @@ Index: binutils-2.24/bfd/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6574,7 +6832,7 @@
+@@ -6089,7 +6347,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
@@ -7509,7 +4257,7 @@ Index: binutils-2.24/bfd/configure
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
-@@ -6593,6 +6851,10 @@
+@@ -6108,6 +6366,10 @@ else
$as_echo "no" >&6; }
fi
@@ -7520,7 +4268,7 @@ Index: binutils-2.24/bfd/configure
if test "x$ac_ct_AR" = x; then
AR="false"
else
-@@ -6604,16 +6866,72 @@
+@@ -6119,12 +6381,10 @@ ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
@@ -7532,16 +4280,12 @@ Index: binutils-2.24/bfd/configure
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
+
+
+
+@@ -6136,6 +6396,64 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
@@ -7551,11 +4295,11 @@ Index: binutils-2.24/bfd/configure
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-
++
+int
+main ()
+{
-
++
+ ;
+ return 0;
+}
@@ -7581,7 +4325,7 @@ Index: binutils-2.24/bfd/configure
+ fi
+ fi
+ rm -f conftest.* libconftest.a
-
++
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
@@ -7594,10 +4338,17 @@ Index: binutils-2.24/bfd/configure
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
-
-
-
-@@ -6955,8 +7273,8 @@
++
++
++
++
++
++
++
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+@@ -6470,8 +6788,8 @@ esac
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
@@ -7608,7 +4359,7 @@ Index: binutils-2.24/bfd/configure
# Handle CRLF in mingw tool chain
opt_cr=
-@@ -6992,6 +7310,7 @@
+@@ -6507,6 +6825,7 @@ for ac_symprfx in "" "_"; do
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
@@ -7616,7 +4367,7 @@ Index: binutils-2.24/bfd/configure
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -7033,6 +7352,18 @@
+@@ -6548,6 +6867,18 @@ _LT_EOF
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
@@ -7635,7 +4386,7 @@ Index: binutils-2.24/bfd/configure
#ifdef __cplusplus
extern "C" {
#endif
-@@ -7044,7 +7375,7 @@
+@@ -6559,7 +6890,7 @@ _LT_EOF
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
@@ -7644,7 +4395,7 @@ Index: binutils-2.24/bfd/configure
const char *name;
void *address;
}
-@@ -7070,8 +7401,8 @@
+@@ -6585,8 +6916,8 @@ static const void *lt_preloaded_setup() {
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
@@ -7655,7 +4406,7 @@ Index: binutils-2.24/bfd/configure
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -7081,8 +7412,8 @@
+@@ -6596,8 +6927,8 @@ _LT_EOF
test $ac_status = 0; } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
@@ -7666,7 +4417,7 @@ Index: binutils-2.24/bfd/configure
else
echo "cannot find nm_test_func in $nlist" >&5
fi
-@@ -7119,6 +7450,20 @@
+@@ -6634,6 +6965,21 @@ else
$as_echo "ok" >&6; }
fi
@@ -7684,10 +4435,11 @@ Index: binutils-2.24/bfd/configure
+
+
+
++
-@@ -7138,6 +7483,41 @@
+@@ -6652,6 +6998,40 @@ fi
@@ -7725,11 +4477,10 @@ Index: binutils-2.24/bfd/configure
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
-+
- # Check whether --enable-libtool-lock was given.
-@@ -7346,6 +7726,123 @@
+
+@@ -6861,6 +7241,123 @@ esac
need_locks="$enable_libtool_lock"
@@ -7853,7 +4604,7 @@ Index: binutils-2.24/bfd/configure
case $host_os in
rhapsody* | darwin*)
-@@ -7909,6 +8406,8 @@
+@@ -7424,6 +7921,8 @@ _LT_EOF
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
echo "$AR cru libconftest.a conftest.o" >&5
$AR cru libconftest.a conftest.o 2>&5
@@ -7862,7 +4613,7 @@ Index: binutils-2.24/bfd/configure
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
-@@ -8073,7 +8572,8 @@
+@@ -7619,7 +8118,8 @@ fi
LIBTOOL_DEPS="$ltmain"
# Always use our own libtool.
@@ -7872,7 +4623,7 @@ Index: binutils-2.24/bfd/configure
-@@ -8162,7 +8662,7 @@
+@@ -7708,7 +8208,7 @@ aix3*)
esac
# Global variables:
@@ -7881,7 +4632,7 @@ Index: binutils-2.24/bfd/configure
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8460,8 +8960,6 @@
+@@ -8006,8 +8506,6 @@ fi
lt_prog_compiler_pic=
lt_prog_compiler_static=
@@ -7890,7 +4641,7 @@ Index: binutils-2.24/bfd/configure
if test "$GCC" = yes; then
lt_prog_compiler_wl='-Wl,'
-@@ -8627,6 +9125,12 @@
+@@ -8173,6 +8671,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
@@ -7903,7 +4654,7 @@ Index: binutils-2.24/bfd/configure
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
-@@ -8689,7 +9193,7 @@
+@@ -8235,7 +8739,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
case $cc_basename in
@@ -7912,7 +4663,7 @@ Index: binutils-2.24/bfd/configure
lt_prog_compiler_wl='-Qoption ld ';;
*)
lt_prog_compiler_wl='-Wl,';;
-@@ -8746,13 +9250,17 @@
+@@ -8292,13 +8796,17 @@ case $host_os in
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
@@ -7936,7 +4687,7 @@ Index: binutils-2.24/bfd/configure
#
# Check to make sure the PIC flag actually works.
-@@ -8813,6 +9321,11 @@
+@@ -8359,6 +8867,11 @@ fi
@@ -7948,7 +4699,7 @@ Index: binutils-2.24/bfd/configure
#
# Check to make sure the static flag actually works.
#
-@@ -9163,7 +9676,8 @@
+@@ -8709,7 +9222,8 @@ _LT_EOF
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
@@ -7958,7 +4709,7 @@ Index: binutils-2.24/bfd/configure
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -9211,7 +9725,7 @@
+@@ -8757,7 +9271,7 @@ _LT_EOF
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
@@ -7967,7 +4718,7 @@ Index: binutils-2.24/bfd/configure
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
-@@ -9262,12 +9776,12 @@
+@@ -8808,12 +9322,12 @@ _LT_EOF
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld='-rpath $libdir'
@@ -7982,7 +4733,7 @@ Index: binutils-2.24/bfd/configure
fi
;;
esac
-@@ -9281,8 +9795,8 @@
+@@ -8827,8 +9341,8 @@ _LT_EOF
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
@@ -7993,7 +4744,7 @@ Index: binutils-2.24/bfd/configure
fi
;;
-@@ -9300,8 +9814,8 @@
+@@ -8846,8 +9360,8 @@ _LT_EOF
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
@@ -8004,7 +4755,7 @@ Index: binutils-2.24/bfd/configure
else
ld_shlibs=no
fi
-@@ -9347,8 +9861,8 @@
+@@ -8893,8 +9407,8 @@ _LT_EOF
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
@@ -8015,7 +4766,7 @@ Index: binutils-2.24/bfd/configure
else
ld_shlibs=no
fi
-@@ -9478,7 +9992,13 @@
+@@ -9024,7 +9538,13 @@ _LT_EOF
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
@@ -8030,7 +4781,7 @@ Index: binutils-2.24/bfd/configure
/* end confdefs.h. */
int
-@@ -9491,22 +10011,29 @@
+@@ -9037,22 +9557,29 @@ main ()
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
@@ -8073,7 +4824,7 @@ Index: binutils-2.24/bfd/configure
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9518,7 +10045,13 @@
+@@ -9064,7 +9591,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
else
# Determine the default libpath from the value encoded in an
# empty executable.
@@ -8088,7 +4839,7 @@ Index: binutils-2.24/bfd/configure
/* end confdefs.h. */
int
-@@ -9531,22 +10064,29 @@
+@@ -9077,22 +9610,29 @@ main ()
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
@@ -8131,7 +4882,7 @@ Index: binutils-2.24/bfd/configure
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
-@@ -9591,20 +10131,63 @@
+@@ -9137,20 +9677,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
@@ -8209,7 +4960,7 @@ Index: binutils-2.24/bfd/configure
;;
darwin* | rhapsody*)
-@@ -9665,7 +10248,7 @@
+@@ -9211,7 +9794,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
@@ -8218,7 +4969,7 @@ Index: binutils-2.24/bfd/configure
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
-@@ -9673,7 +10256,7 @@
+@@ -9219,7 +9802,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hpux9*)
if test "$GCC" = yes; then
@@ -8227,7 +4978,7 @@ Index: binutils-2.24/bfd/configure
else
archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
-@@ -9689,7 +10272,7 @@
+@@ -9235,7 +9818,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hpux10*)
if test "$GCC" = yes && test "$with_gnu_ld" = no; then
@@ -8236,7 +4987,7 @@ Index: binutils-2.24/bfd/configure
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
-@@ -9713,10 +10296,10 @@
+@@ -9259,10 +9842,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
@@ -8249,7 +5000,7 @@ Index: binutils-2.24/bfd/configure
;;
esac
else
-@@ -9795,23 +10378,36 @@
+@@ -9341,23 +9924,36 @@ fi
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
@@ -8294,7 +5045,7 @@ Index: binutils-2.24/bfd/configure
else
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -9896,7 +10492,7 @@
+@@ -9442,7 +10038,7 @@ rm -f core conftest.err conftest.$ac_objext \
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
@@ -8303,7 +5054,7 @@ Index: binutils-2.24/bfd/configure
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
-@@ -9915,9 +10511,9 @@
+@@ -9461,9 +10057,9 @@ rm -f core conftest.err conftest.$ac_objext \
no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
@@ -8315,7 +5066,7 @@ Index: binutils-2.24/bfd/configure
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
-@@ -10493,8 +11089,9 @@
+@@ -10039,8 +10635,9 @@ cygwin* | mingw* | pw32* | cegcc*)
need_version=no
need_lib_prefix=no
@@ -8327,7 +5078,7 @@ Index: binutils-2.24/bfd/configure
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
-@@ -10527,13 +11124,71 @@
+@@ -10073,13 +10670,71 @@ cygwin* | mingw* | pw32* | cegcc*)
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
@@ -8400,7 +5151,7 @@ Index: binutils-2.24/bfd/configure
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
-@@ -10625,7 +11280,7 @@
+@@ -10171,7 +10826,7 @@ haiku*)
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=yes
@@ -8409,7 +5160,7 @@ Index: binutils-2.24/bfd/configure
hardcode_into_libs=yes
;;
-@@ -11465,10 +12120,10 @@
+@@ -11011,10 +11666,10 @@ else
/* When -fvisbility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
@@ -8422,7 +5173,7 @@ Index: binutils-2.24/bfd/configure
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11571,10 +12226,10 @@
+@@ -11117,10 +11772,10 @@ else
/* When -fvisbility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
@@ -8435,16 +5186,7 @@ Index: binutils-2.24/bfd/configure
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -15079,7 +15734,7 @@
- if test "$enable_shared" = "yes"; then
- x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
- if test -n "$x"; then
-- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
-+ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
- fi
-
- # More hacks to build DLLs on Windows.
-@@ -16694,13 +17349,20 @@
+@@ -15274,13 +15929,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
@@ -8465,7 +5207,7 @@ Index: binutils-2.24/bfd/configure
STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -16715,14 +17377,17 @@
+@@ -15295,14 +15957,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
@@ -8484,7 +5226,7 @@ Index: binutils-2.24/bfd/configure
DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -16755,12 +17420,12 @@
+@@ -15335,12 +16000,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
@@ -8498,7 +5240,7 @@ Index: binutils-2.24/bfd/configure
file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -16815,8 +17480,13 @@
+@@ -15395,8 +16060,13 @@ reload_flag \
OBJDUMP \
deplibs_check_method \
file_magic_cmd \
@@ -8512,7 +5254,7 @@ Index: binutils-2.24/bfd/configure
STRIP \
RANLIB \
CC \
-@@ -16826,12 +17496,14 @@
+@@ -15406,12 +16076,14 @@ lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
@@ -8528,7 +5270,7 @@ Index: binutils-2.24/bfd/configure
DSYMUTIL \
NMEDIT \
LIPO \
-@@ -16847,7 +17519,6 @@
+@@ -15427,7 +16099,6 @@ no_undefined_flag \
hardcode_libdir_flag_spec \
hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
@@ -8536,7 +5278,7 @@ Index: binutils-2.24/bfd/configure
exclude_expsyms \
include_expsyms \
file_list_spec \
-@@ -16883,6 +17554,7 @@
+@@ -15463,6 +16134,7 @@ module_cmds \
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
@@ -8544,7 +5286,7 @@ Index: binutils-2.24/bfd/configure
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
-@@ -17662,7 +18334,8 @@
+@@ -16227,7 +16899,8 @@ $as_echo X"$file" |
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
@@ -8554,7 +5296,7 @@ Index: binutils-2.24/bfd/configure
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
-@@ -17765,19 +18438,42 @@
+@@ -16330,19 +17003,42 @@ SP2NL=$lt_lt_SP2NL
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
@@ -8598,7 +5340,7 @@ Index: binutils-2.24/bfd/configure
# A symbol stripping program.
STRIP=$lt_STRIP
-@@ -17807,6 +18503,12 @@
+@@ -16372,6 +17068,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
@@ -8611,7 +5353,7 @@ Index: binutils-2.24/bfd/configure
# The name of the directory that contains temporary libtool files.
objdir=$objdir
-@@ -17816,6 +18518,9 @@
+@@ -16381,6 +17083,9 @@ MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
@@ -8621,7 +5363,7 @@ Index: binutils-2.24/bfd/configure
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
-@@ -17930,12 +18635,12 @@
+@@ -16495,12 +17200,12 @@ with_gcc=$GCC
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
@@ -8637,7 +5379,7 @@ Index: binutils-2.24/bfd/configure
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
-@@ -18022,9 +18727,6 @@
+@@ -16587,9 +17292,6 @@ inherit_rpath=$inherit_rpath
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
@@ -8647,7 +5389,7 @@ Index: binutils-2.24/bfd/configure
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
-@@ -18040,6 +18742,9 @@
+@@ -16605,6 +17307,9 @@ include_expsyms=$lt_include_expsyms
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
@@ -8657,7 +5399,7 @@ Index: binutils-2.24/bfd/configure
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
-@@ -18072,210 +18777,169 @@
+@@ -16637,210 +17342,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
@@ -8859,9 +5601,15 @@ Index: binutils-2.24/bfd/configure
-_LT_EOF
- ;;
- esac
+-
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
-
++
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
@@ -9019,38 +5767,37 @@ Index: binutils-2.24/bfd/configure
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
-
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
-
-- mv -f "$cfgfile" "$ofile" ||
++
++
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
-Index: binutils-2.24/opcodes/configure
-===================================================================
---- binutils-2.24.orig/opcodes/configure 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/opcodes/configure 2013-12-15 11:10:23.873785364 -0800
-@@ -648,6 +648,9 @@
+diff --git a/gprof/configure b/gprof/configure
+index 79961c5..c4f6ac9 100755
+--- a/gprof/configure
++++ b/gprof/configure
+@@ -629,8 +629,11 @@ OTOOL
LIPO
NMEDIT
DSYMUTIL
+MANIFEST_TOOL
+ RANLIB
+ac_ct_AR
+ AR
+DLLTOOL
OBJDUMP
LN_S
NM
-@@ -760,6 +763,7 @@
+@@ -741,6 +744,7 @@ enable_static
with_pic
enable_fast_install
with_gnu_ld
+with_libtool_sysroot
enable_libtool_lock
- enable_targets
- enable_werror
-@@ -1418,6 +1422,8 @@
+ enable_plugins
+ enable_largefile
+@@ -1399,6 +1403,8 @@ Optional Packages:
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
@@ -9059,7 +5806,7 @@ Index: binutils-2.24/opcodes/configure
Some influential environment variables:
CC C compiler command
-@@ -5113,8 +5119,8 @@
+@@ -4831,8 +4837,8 @@ esac
@@ -9070,7 +5817,7 @@ Index: binutils-2.24/opcodes/configure
-@@ -5154,7 +5160,7 @@
+@@ -4872,7 +4878,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
$as_echo_n "checking how to print strings... " >&6; }
# Test print first, because it will be a builtin if present.
@@ -9079,7 +5826,7 @@ Index: binutils-2.24/opcodes/configure
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -5840,8 +5846,8 @@
+@@ -5558,8 +5564,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
@@ -9090,7 +5837,7 @@ Index: binutils-2.24/opcodes/configure
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
-@@ -5890,6 +5896,80 @@
+@@ -5608,6 +5614,80 @@ esac
@@ -9171,7 +5918,7 @@ Index: binutils-2.24/opcodes/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -5906,6 +5986,11 @@
+@@ -5624,6 +5704,11 @@ case $reload_flag in
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
@@ -9183,7 +5930,7 @@ Index: binutils-2.24/opcodes/configure
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6074,7 +6159,8 @@
+@@ -5792,7 +5877,8 @@ mingw* | pw32*)
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -9193,7 +5940,19 @@ Index: binutils-2.24/opcodes/configure
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-@@ -6228,6 +6314,21 @@
+@@ -5869,11 +5955,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+-linux-uclibc*)
+- lt_cv_deplibs_check_method=pass_all
+- lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
+- ;;
+-
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+@@ -5951,6 +6032,21 @@ esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
@@ -9215,7 +5974,7 @@ Index: binutils-2.24/opcodes/configure
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6243,9 +6344,162 @@
+@@ -5966,9 +6062,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -9229,9 +5988,7 @@ Index: binutils-2.24/opcodes/configure
+
+
+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
++if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -9372,7 +6129,9 @@ Index: binutils-2.24/opcodes/configure
+
+
+
-+if test -n "$ac_tool_prefix"; then
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
@@ -9380,7 +6139,7 @@ Index: binutils-2.24/opcodes/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6261,7 +6515,7 @@
+@@ -5984,7 +6233,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
@@ -9389,7 +6148,7 @@ Index: binutils-2.24/opcodes/configure
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
-@@ -6281,11 +6535,15 @@
+@@ -6004,11 +6253,15 @@ $as_echo "no" >&6; }
fi
@@ -9408,7 +6167,7 @@ Index: binutils-2.24/opcodes/configure
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6301,7 +6559,7 @@
+@@ -6024,7 +6277,7 @@ do
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
@@ -9417,7 +6176,7 @@ Index: binutils-2.24/opcodes/configure
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
-@@ -6320,6 +6578,10 @@
+@@ -6043,6 +6296,10 @@ else
$as_echo "no" >&6; }
fi
@@ -9428,7 +6187,7 @@ Index: binutils-2.24/opcodes/configure
if test "x$ac_ct_AR" = x; then
AR="false"
else
-@@ -6331,12 +6593,11 @@
+@@ -6054,12 +6311,10 @@ ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
@@ -9440,11 +6199,10 @@ Index: binutils-2.24/opcodes/configure
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
-+
-@@ -6347,6 +6608,63 @@
+@@ -6071,6 +6326,64 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
@@ -9505,10 +6263,11 @@ Index: binutils-2.24/opcodes/configure
+
+
+
-
++
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-@@ -6682,8 +7000,8 @@
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+@@ -6405,8 +6718,8 @@ esac
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
@@ -9519,7 +6278,7 @@ Index: binutils-2.24/opcodes/configure
# Handle CRLF in mingw tool chain
opt_cr=
-@@ -6719,6 +7037,7 @@
+@@ -6442,6 +6755,7 @@ for ac_symprfx in "" "_"; do
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
@@ -9527,7 +6286,7 @@ Index: binutils-2.24/opcodes/configure
# Check to see that the pipe works correctly.
pipe_works=no
-@@ -6760,6 +7079,18 @@
+@@ -6483,6 +6797,18 @@ _LT_EOF
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
@@ -9546,7 +6305,7 @@ Index: binutils-2.24/opcodes/configure
#ifdef __cplusplus
extern "C" {
#endif
-@@ -6771,7 +7102,7 @@
+@@ -6494,7 +6820,7 @@ _LT_EOF
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
@@ -9555,7 +6314,7 @@ Index: binutils-2.24/opcodes/configure
const char *name;
void *address;
}
-@@ -6797,8 +7128,8 @@
+@@ -6520,8 +6846,8 @@ static const void *lt_preloaded_setup() {
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
@@ -9566,7 +6325,7 @@ Index: binutils-2.24/opcodes/configure
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -6808,8 +7139,8 @@
+@@ -6531,8 +6857,8 @@ _LT_EOF
test $ac_status = 0; } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
@@ -9577,7 +6336,7 @@ Index: binutils-2.24/opcodes/configure
else
echo "cannot find nm_test_func in $nlist" >&5
fi
-@@ -6846,6 +7177,14 @@
+@@ -6569,6 +6895,18 @@ else
$as_echo "ok" >&6; }
fi
@@ -9589,17 +6348,17 @@ Index: binutils-2.24/opcodes/configure
+fi
+
+
++
++
++
++
-@@ -6867,6 +7206,47 @@
+@@ -6590,6 +6928,43 @@ fi
-+
-+
-+
-+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
@@ -9640,7 +6399,7 @@ Index: binutils-2.24/opcodes/configure
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
-@@ -7073,6 +7453,123 @@
+@@ -6796,6 +7171,123 @@ esac
need_locks="$enable_libtool_lock"
@@ -9764,7 +6523,7 @@ Index: binutils-2.24/opcodes/configure
case $host_os in
rhapsody* | darwin*)
-@@ -7636,6 +8133,8 @@
+@@ -7359,6 +7851,8 @@ _LT_EOF
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
echo "$AR cru libconftest.a conftest.o" >&5
$AR cru libconftest.a conftest.o 2>&5
@@ -9773,7 +6532,7 @@ Index: binutils-2.24/opcodes/configure
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
-@@ -7801,7 +8300,8 @@
+@@ -7554,7 +8048,8 @@ fi
LIBTOOL_DEPS="$ltmain"
# Always use our own libtool.
@@ -9783,7508 +6542,11109 @@ Index: binutils-2.24/opcodes/configure
-@@ -7890,7 +8390,7 @@
- esac
+@@ -7643,7 +8138,7 @@ aix3*)
+ esac
+
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -7941,8 +8436,6 @@ fi
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8108,6 +8601,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -8170,7 +8669,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+@@ -8227,13 +8726,17 @@ case $host_os in
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+ esac
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
+-
+-
+-
+-
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -8294,6 +8797,11 @@ fi
+
+
+
++
++
++
++
++
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -8644,7 +9152,8 @@ _LT_EOF
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -8692,7 +9201,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -8743,12 +9252,12 @@ _LT_EOF
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -8762,8 +9271,8 @@ _LT_EOF
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -8781,8 +9290,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -8828,8 +9337,8 @@ _LT_EOF
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -8959,7 +9468,13 @@ _LT_EOF
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -8972,22 +9487,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -8999,7 +9521,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -9012,22 +9540,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -9072,20 +9607,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- hardcode_libdir_flag_spec=' '
+- allow_undefined_flag=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- old_archive_from_new_cmds='true'
+- # FIXME: Should let the user specify the lib program.
+- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
+- enable_shared_with_static_runtimes=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
+ ;;
+
+ darwin* | rhapsody*)
+@@ -9146,7 +9724,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+@@ -9154,7 +9732,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
+ hpux9*)
+ if test "$GCC" = yes; then
+- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -9170,7 +9748,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8188,8 +8688,6 @@
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -9194,10 +9772,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -9276,23 +9854,36 @@ fi
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
--$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if test "${lt_cv_irix_exported_symbol+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-int foo(void) {}
++int foo (void) { return 0; }
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+-
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS="$save_LDFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -9377,7 +9968,7 @@ rm -f core conftest.err conftest.$ac_objext \
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+@@ -9396,9 +9987,9 @@ rm -f core conftest.err conftest.$ac_objext \
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -9974,8 +10565,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
-@@ -8355,6 +8853,12 @@
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ lt_prog_compiler_wl='-Wl,-Wl,,'
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -8417,7 +8921,7 @@
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
-@@ -8474,13 +8978,17 @@
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -10008,13 +10600,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
;;
- esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
--$as_echo "$lt_prog_compiler_pic" >&6; }
--
--
--
--
-
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
- #
- # Check to make sure the PIC flag actually works.
-@@ -8541,6 +9049,11 @@
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -10106,7 +10756,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+@@ -10946,10 +11596,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -11052,10 +11702,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
-+
-+
-+
-+
-+
- #
- # Check to make sure the static flag actually works.
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -12924,13 +13574,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+ lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+ lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+ lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+ reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+ reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+ OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+ deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+ file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+ AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+ AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+ STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+ RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+ old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+@@ -12945,14 +13602,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
+ lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+ objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+ MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+ lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+ need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+ DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+ NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+ LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+@@ -12985,12 +13645,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
+ hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+ inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+ link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
+ always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+ export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+ exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+ include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+ prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+ file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+ variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+ need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+@@ -13045,8 +13705,13 @@ reload_flag \
+ OBJDUMP \
+ deplibs_check_method \
+ file_magic_cmd \
++file_magic_glob \
++want_nocaseglob \
++DLLTOOL \
++sharedlib_from_linklib_cmd \
+ AR \
+ AR_FLAGS \
++archiver_list_spec \
+ STRIP \
+ RANLIB \
+ CC \
+@@ -13056,12 +13721,14 @@ lt_cv_sys_global_symbol_pipe \
+ lt_cv_sys_global_symbol_to_cdecl \
+ lt_cv_sys_global_symbol_to_c_name_address \
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
++nm_file_list_spec \
+ lt_prog_compiler_no_builtin_flag \
+-lt_prog_compiler_wl \
+ lt_prog_compiler_pic \
++lt_prog_compiler_wl \
+ lt_prog_compiler_static \
+ lt_cv_prog_compiler_c_o \
+ need_locks \
++MANIFEST_TOOL \
+ DSYMUTIL \
+ NMEDIT \
+ LIPO \
+@@ -13077,7 +13744,6 @@ no_undefined_flag \
+ hardcode_libdir_flag_spec \
+ hardcode_libdir_flag_spec_ld \
+ hardcode_libdir_separator \
+-fix_srcfile_path \
+ exclude_expsyms \
+ include_expsyms \
+ file_list_spec \
+@@ -13113,6 +13779,7 @@ module_cmds \
+ module_expsym_cmds \
+ export_symbols_cmds \
+ prelink_cmds \
++postlink_cmds \
+ postinstall_cmds \
+ postuninstall_cmds \
+ finish_cmds \
+@@ -13869,7 +14536,8 @@ $as_echo X"$file" |
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
-@@ -8891,7 +9404,8 @@
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
-- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -8939,7 +9453,7 @@
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -8990,12 +9504,12 @@
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
-- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
-@@ -9009,8 +9523,8 @@
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
-@@ -9028,8 +9542,8 @@
-
- _LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9075,8 +9589,8 @@
-
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9206,7 +9720,13 @@
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -13972,19 +14640,42 @@ SP2NL=$lt_lt_SP2NL
+ # turn newlines into spaces.
+ NL2SP=$lt_lt_NL2SP
- int
-@@ -9219,22 +9739,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
++# convert \$build file names to \$host format.
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++
++# convert \$build files to toolchain format.
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++
+ # An object symbol dumper.
+ OBJDUMP=$lt_OBJDUMP
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
+ # Method to check whether dependent libraries are shared objects.
+ deplibs_check_method=$lt_deplibs_check_method
+
+-# Command to use when deplibs_check_method == "file_magic".
++# Command to use when deplibs_check_method = "file_magic".
+ file_magic_cmd=$lt_file_magic_cmd
+
++# How to find potential files when deplibs_check_method = "file_magic".
++file_magic_glob=$lt_file_magic_glob
+
-+fi
++# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
++want_nocaseglob=$lt_want_nocaseglob
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
++# DLL creation program.
++DLLTOOL=$lt_DLLTOOL
++
++# Command to associate shared and link libraries.
++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
++
+ # The archiver.
+ AR=$lt_AR
++
++# Flags to create an archive.
+ AR_FLAGS=$lt_AR_FLAGS
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9246,7 +9773,13 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
++# How to feed a file listing to the archiver.
++archiver_list_spec=$lt_archiver_list_spec
++
+ # A symbol stripping program.
+ STRIP=$lt_STRIP
- int
-@@ -9259,22 +9792,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+@@ -14014,6 +14705,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+ # Transform the output of nm in a C name address pair when lib prefix is needed.
+ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
++# Specify filename containing input files for \$NM.
++nm_file_list_spec=$lt_nm_file_list_spec
+
-+fi
++# The root where to search for dependent libraries,and in which our libraries should be installed.
++lt_sysroot=$lt_sysroot
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+ # The name of the directory that contains temporary libtool files.
+ objdir=$objdir
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -9319,20 +9859,63 @@
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
-- hardcode_libdir_flag_spec=' '
-- allow_undefined_flag=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- old_archive_from_new_cmds='true'
-- # FIXME: Should let the user specify the lib program.
-- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- enable_shared_with_static_runtimes=yes
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ file_list_spec='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ old_postinstall_cmds='chmod 644 $oldlib'
-+ postlink_cmds='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_from_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+ esac
- ;;
+@@ -14023,6 +14720,9 @@ MAGIC_CMD=$MAGIC_CMD
+ # Must we lock files when doing compilation?
+ need_locks=$lt_need_locks
- darwin* | rhapsody*)
-@@ -9393,7 +9976,7 @@
++# Manifest tool.
++MANIFEST_TOOL=$lt_MANIFEST_TOOL
++
+ # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+ DSYMUTIL=$lt_DSYMUTIL
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-@@ -9401,7 +9984,7 @@
+@@ -14137,12 +14837,12 @@ with_gcc=$GCC
+ # Compiler flag to turn off builtin functions.
+ no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
- hpux9*)
- if test "$GCC" = yes; then
-- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
-@@ -9417,7 +10000,7 @@
+-# How to pass a linker flag through the compiler.
+-wl=$lt_lt_prog_compiler_wl
+-
+ # Additional compiler flags for building library objects.
+ pic_flag=$lt_lt_prog_compiler_pic
+
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
+ # Compiler flag to prevent dynamic linking.
+ link_static_flag=$lt_lt_prog_compiler_static
+
+@@ -14229,9 +14929,6 @@ inherit_rpath=$inherit_rpath
+ # Whether libtool must link a program against all its dependency libraries.
+ link_all_deplibs=$link_all_deplibs
+
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path=$lt_fix_srcfile_path
+-
+ # Set to "yes" if exported symbols are required.
+ always_export_symbols=$always_export_symbols
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
-@@ -9441,10 +10024,10 @@
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
-@@ -9523,23 +10106,36 @@
+@@ -14247,6 +14944,9 @@ include_expsyms=$lt_include_expsyms
+ # Commands necessary for linking programs (against libraries) with templates.
+ prelink_cmds=$lt_prelink_cmds
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-+if test "${lt_cv_irix_exported_symbol+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
--int foo(void) {}
-+int foo (void) { return 0; }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds
++
+ # Specify filename containing input files.
+ file_list_spec=$lt_file_list_spec
+
+@@ -14279,210 +14979,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $* ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+-
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+-}
+-
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+- esac
+-}
+-
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[^=]*=//'
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$@"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+-
+-_LT_EOF
+-esac
+-
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1+=\$2"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1=\$$1\$2"
+-}
+-
+-_LT_EOF
+- ;;
+- esac
+-
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
-
-+ lt_cv_irix_exported_symbol=yes
-+else
-+ lt_cv_irix_exported_symbol=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-- LDFLAGS="$save_LDFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
+- mv -f "$cfgfile" "$ofile" ||
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
++
++ if test x"$xsi_shell" = xyes; then
++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
++func_dirname ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_basename ()$/,/^} # func_basename /c\
++func_basename ()\
++{\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
++func_dirname_and_basename ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
++func_stripname ()\
++{\
++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
++\ # positional parameters, so assign one to ordinary parameter first.\
++\ func_stripname_result=${3}\
++\ func_stripname_result=${func_stripname_result#"${1}"}\
++\ func_stripname_result=${func_stripname_result%"${2}"}\
++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
++func_split_long_opt ()\
++{\
++\ func_split_long_opt_name=${1%%=*}\
++\ func_split_long_opt_arg=${1#*=}\
++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
++func_split_short_opt ()\
++{\
++\ func_split_short_opt_arg=${1#??}\
++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
++func_lo2o ()\
++{\
++\ case ${1} in\
++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
++\ *) func_lo2o_result=${1} ;;\
++\ esac\
++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_xform ()$/,/^} # func_xform /c\
++func_xform ()\
++{\
++ func_xform_result=${1%.*}.lo\
++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_arith ()$/,/^} # func_arith /c\
++func_arith ()\
++{\
++ func_arith_result=$(( $* ))\
++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_len ()$/,/^} # func_len /c\
++func_len ()\
++{\
++ func_len_result=${#1}\
++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-+ fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -9624,7 +10220,7 @@
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
-@@ -9643,9 +10239,9 @@
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -10221,8 +10817,9 @@
- need_version=no
- need_lib_prefix=no
-
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -10255,13 +10852,71 @@
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
-+ ;;
+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
++if test x"$lt_shell_append" = xyes; then
++ sed -e '/^func_append ()$/,/^} # func_append /c\
++func_append ()\
++{\
++ eval "${1}+=\\${2}"\
++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
++func_append_quoted ()\
++{\
++\ func_quote_for_eval "${2}"\
++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
++fi
++
++
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -10353,7 +11008,7 @@
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
+diff --git a/ld/configure b/ld/configure
+index 4408b0d..2fbaebf 100755
+--- a/ld/configure
++++ b/ld/configure
+@@ -654,8 +654,11 @@ OTOOL
+ LIPO
+ NMEDIT
+ DSYMUTIL
++MANIFEST_TOOL
+ RANLIB
++ac_ct_AR
+ AR
++DLLTOOL
+ OBJDUMP
+ LN_S
+ NM
+@@ -776,6 +779,7 @@ enable_static
+ with_pic
+ enable_fast_install
+ with_gnu_ld
++with_libtool_sysroot
+ enable_libtool_lock
+ enable_plugins
+ enable_largefile
+@@ -1453,6 +1457,8 @@ Optional Packages:
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).
+ --with-lib-path=dir1:dir2... set default LIB_PATH
+ --with-sysroot=DIR Search for usr/lib et al within DIR.
+ --with-zlib include zlib support (auto/yes/no) default=auto
+@@ -5645,8 +5651,8 @@ esac
-@@ -11193,10 +11848,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11299,10 +11954,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -12415,7 +13070,7 @@
- # since libbfd may not pull in the entirety of libiberty.
- x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
- if test -n "$x"; then
-- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
-+ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
- fi
+-macro_version='2.2.7a'
+-macro_revision='1.3134'
++macro_version='2.4'
++macro_revision='1.3293'
- case "${host}" in
-@@ -13387,13 +14042,20 @@
- lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
- lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
- lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
- reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
- reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
- OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
- deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
- file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
- AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
- AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
- STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
- RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
- old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -13408,14 +14070,17 @@
- lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
- objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
- MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
--lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
- lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
- need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
- DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
- NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
- LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -13448,12 +14113,12 @@
- hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
- inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
- link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
--fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
- always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
- export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
- exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
- include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
- prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
- file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
- variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
- need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -13508,8 +14173,13 @@
- OBJDUMP \
- deplibs_check_method \
- file_magic_cmd \
-+file_magic_glob \
-+want_nocaseglob \
-+DLLTOOL \
-+sharedlib_from_linklib_cmd \
- AR \
- AR_FLAGS \
-+archiver_list_spec \
- STRIP \
- RANLIB \
- CC \
-@@ -13519,12 +14189,14 @@
- lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-+nm_file_list_spec \
- lt_prog_compiler_no_builtin_flag \
--lt_prog_compiler_wl \
- lt_prog_compiler_pic \
-+lt_prog_compiler_wl \
- lt_prog_compiler_static \
- lt_cv_prog_compiler_c_o \
- need_locks \
-+MANIFEST_TOOL \
- DSYMUTIL \
- NMEDIT \
- LIPO \
-@@ -13540,7 +14212,6 @@
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
--fix_srcfile_path \
- exclude_expsyms \
- include_expsyms \
- file_list_spec \
-@@ -13576,6 +14247,7 @@
- module_expsym_cmds \
- export_symbols_cmds \
- prelink_cmds \
-+postlink_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- finish_cmds \
-@@ -14332,7 +15004,8 @@
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
- #
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is part of GNU Libtool.
-@@ -14435,19 +15108,42 @@
- # turn newlines into spaces.
- NL2SP=$lt_lt_NL2SP
-+# convert \$build file names to \$host format.
+
+@@ -5686,7 +5692,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+ $as_echo_n "checking how to print strings... " >&6; }
+ # Test print first, because it will be a builtin if present.
+-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+ elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+@@ -6372,8 +6378,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -6422,6 +6428,80 @@ esac
+
+
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
++$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
++if test "${lt_cv_to_host_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++
++fi
++
+to_host_file_cmd=$lt_cv_to_host_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
++$as_echo "$lt_cv_to_host_file_cmd" >&6; }
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
++if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ #assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
++
++fi
+
-+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
++$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
- # An object symbol dumper.
- OBJDUMP=$lt_OBJDUMP
++
++
++
++
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+ $as_echo_n "checking for $LD option to reload object files... " >&6; }
+ if test "${lt_cv_ld_reload_flag+set}" = set; then :
+@@ -6438,6 +6518,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -6606,7 +6691,8 @@ mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+@@ -6760,6 +6846,21 @@ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+ $as_echo "$lt_cv_deplibs_check_method" >&6; }
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -6775,9 +6876,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
- # Method to check whether dependent libraries are shared objects.
- deplibs_check_method=$lt_deplibs_check_method
--# Command to use when deplibs_check_method == "file_magic".
-+# Command to use when deplibs_check_method = "file_magic".
- file_magic_cmd=$lt_file_magic_cmd
-+# How to find potential files when deplibs_check_method = "file_magic".
-+file_magic_glob=$lt_file_magic_glob
+
-+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-+want_nocaseglob=$lt_want_nocaseglob
+
-+# DLL creation program.
-+DLLTOOL=$lt_DLLTOOL
+
-+# Command to associate shared and link libraries.
-+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
- # The archiver.
- AR=$lt_AR
+
-+# Flags to create an archive.
- AR_FLAGS=$lt_AR_FLAGS
-
-+# How to feed a file listing to the archiver.
-+archiver_list_spec=$lt_archiver_list_spec
+
- # A symbol stripping program.
- STRIP=$lt_STRIP
-
-@@ -14477,6 +15173,12 @@
- # Transform the output of nm in a C name address pair when lib prefix is needed.
- global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-+# Specify filename containing input files for \$NM.
-+nm_file_list_spec=$lt_nm_file_list_spec
+
-+# The root where to search for dependent libraries,and in which our libraries should be installed.
-+lt_sysroot=$lt_sysroot
+
- # The name of the directory that contains temporary libtool files.
- objdir=$objdir
-
-@@ -14486,6 +15188,9 @@
- # Must we lock files when doing compilation?
- need_locks=$lt_need_locks
-
-+# Manifest tool.
-+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
- # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
- DSYMUTIL=$lt_DSYMUTIL
-
-@@ -14600,12 +15305,12 @@
- # Compiler flag to turn off builtin functions.
- no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
--# How to pass a linker flag through the compiler.
--wl=$lt_lt_prog_compiler_wl
--
- # Additional compiler flags for building library objects.
- pic_flag=$lt_lt_prog_compiler_pic
-
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
+
- # Compiler flag to prevent dynamic linking.
- link_static_flag=$lt_lt_prog_compiler_static
-
-@@ -14692,9 +15397,6 @@
- # Whether libtool must link a program against all its dependency libraries.
- link_all_deplibs=$link_all_deplibs
-
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path=$lt_fix_srcfile_path
--
- # Set to "yes" if exported symbols are required.
- always_export_symbols=$always_export_symbols
-
-@@ -14710,6 +15412,9 @@
- # Commands necessary for linking programs (against libraries) with templates.
- prelink_cmds=$lt_prelink_cmds
-
-+# Commands necessary for finishing linking programs.
-+postlink_cmds=$lt_postlink_cmds
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DLLTOOL"; then
++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++ ac_ct_DLLTOOL=$DLLTOOL
++ # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DLLTOOL"; then
++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_DLLTOOL" = x; then
++ DLLTOOL="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DLLTOOL=$ac_ct_DLLTOOL
++ fi
++else
++ DLLTOOL="$ac_cv_prog_DLLTOOL"
++fi
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
++$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++
++
++
++
++
+
- # Specify filename containing input files.
- file_list_spec=$lt_file_list_spec
-
-@@ -14742,210 +15447,169 @@
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
--
-- case $xsi_shell in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result="${1##*/}"
--}
--
--# func_dirname_and_basename file append nondir_replacement
--# perform func_basename and func_dirname in a single function
--# call:
--# dirname: Compute the dirname of FILE. If nonempty,
--# add APPEND to the result, otherwise set result
--# to NONDIR_REPLACEMENT.
--# value returned in "$func_dirname_result"
--# basename: Compute filename of FILE.
--# value retuned in "$func_basename_result"
--# Implementation must be kept synchronized with func_dirname
--# and func_basename. For efficiency, we do not delegate to
--# those functions but instead duplicate the functionality here.
--func_dirname_and_basename ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
-- func_basename_result="${1##*/}"
--}
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--func_stripname ()
--{
-- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-- # positional parameters, so assign one to ordinary parameter first.
-- func_stripname_result=${3}
-- func_stripname_result=${func_stripname_result#"${1}"}
-- func_stripname_result=${func_stripname_result%"${2}"}
--}
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=${1%%=*}
-- func_opt_split_arg=${1#*=}
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- case ${1} in
-- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-- *) func_lo2o_result=${1} ;;
-- esac
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=${1%.*}.lo
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=$(( $* ))
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=${#1}
--}
--
--_LT_EOF
-- ;;
-- *) # Bourne compatible functions.
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- # Extract subdirectory from the argument.
-- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-- if test "X$func_dirname_result" = "X${1}"; then
-- func_dirname_result="${3}"
-- else
-- func_dirname_result="$func_dirname_result${2}"
-- fi
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
--}
--
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--# func_strip_suffix prefix name
--func_stripname ()
--{
-- case ${2} in
-- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-- esac
--}
--
--# sed scripts:
--my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
--my_sed_long_arg='1s/^-[^=]*=//'
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=`expr "$@"`
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
--}
--
--_LT_EOF
--esac
--
--case $lt_shell_append in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1+=\$2"
--}
--_LT_EOF
-- ;;
-- *)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1=\$$1\$2"
--}
--
--_LT_EOF
-- ;;
-- esac
-+ sed '$q' "$ltmain" >> "$cfgfile" \
-+ || (rm -f "$cfgfile"; exit 1)
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
++ for ac_prog in ar
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_AR+set}" = set; then :
+@@ -6793,7 +7047,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_AR="${ac_tool_prefix}ar"
++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6813,11 +7067,15 @@ $as_echo "no" >&6; }
+ fi
+
+
++ test -n "$AR" && break
++ done
+ fi
+-if test -z "$ac_cv_prog_AR"; then
++if test -z "$AR"; then
+ ac_ct_AR=$AR
+- # Extract the first word of "ar", so it can be a program name with args.
+-set dummy ar; ac_word=$2
++ for ac_prog in ar
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+@@ -6833,7 +7091,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_ac_ct_AR="ar"
++ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6852,6 +7110,10 @@ else
+ $as_echo "no" >&6; }
+ fi
-+ if test x"$xsi_shell" = xyes; then
-+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-+func_dirname ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
++ test -n "$ac_ct_AR" && break
++done
+
-+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
-+func_basename ()\
-+{\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+@@ -6863,12 +7125,12 @@ ac_tool_warned=yes ;;
+ esac
+ AR=$ac_ct_AR
+ fi
+-else
+- AR="$ac_cv_prog_AR"
+ fi
+
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
++: ${AR=ar}
++: ${AR_FLAGS=cru}
+
+
-+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-+func_dirname_and_basename ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+
+@@ -6878,6 +7140,62 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
++$as_echo_n "checking for archiver @FILE support... " >&6; }
++if test "${lt_cv_ar_at_file+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ar_at_file=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
+
++int
++main ()
++{
+
-+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-+func_stripname ()\
-+{\
-+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-+\ # positional parameters, so assign one to ordinary parameter first.\
-+\ func_stripname_result=${3}\
-+\ func_stripname_result=${func_stripname_result#"${1}"}\
-+\ func_stripname_result=${func_stripname_result%"${2}"}\
-+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
++$as_echo "$lt_cv_ar_at_file" >&6; }
+
-+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-+func_split_long_opt ()\
-+{\
-+\ func_split_long_opt_name=${1%%=*}\
-+\ func_split_long_opt_arg=${1#*=}\
-+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
+
+
-+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-+func_split_short_opt ()\
-+{\
-+\ func_split_short_opt_arg=${1#??}\
-+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-+func_lo2o ()\
-+{\
-+\ case ${1} in\
-+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-+\ *) func_lo2o_result=${1} ;;\
-+\ esac\
-+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++
+
+
+ if test -n "$ac_tool_prefix"; then
+@@ -7214,8 +7532,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -7251,6 +7569,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -7292,6 +7611,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -7303,7 +7634,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -7329,8 +7660,8 @@ static const void *lt_preloaded_setup() {
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+@@ -7340,8 +7671,8 @@ _LT_EOF
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+@@ -7378,6 +7709,19 @@ else
+ $as_echo "ok" >&6; }
+ fi
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
+
+
-+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
-+func_xform ()\
-+{\
-+ func_xform_result=${1%.*}.lo\
-+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
-+func_arith ()\
-+{\
-+ func_arith_result=$(( $* ))\
-+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+ sed -e '/^func_len ()$/,/^} # func_len /c\
-+func_len ()\
-+{\
-+ func_len_result=${#1}\
-+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+
+@@ -7398,6 +7742,42 @@ fi
+
+
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
++$as_echo_n "checking for sysroot... " >&6; }
+
++# Check whether --with-libtool-sysroot was given.
++if test "${with_libtool_sysroot+set}" = set; then :
++ withval=$with_libtool_sysroot;
++else
++ with_libtool_sysroot=no
+fi
+
-+if test x"$lt_shell_append" = xyes; then
-+ sed -e '/^func_append ()$/,/^} # func_append /c\
-+func_append ()\
-+{\
-+ eval "${1}+=\\${2}"\
-+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
++lt_sysroot=
++case ${with_libtool_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
++$as_echo "${with_libtool_sysroot}" >&6; }
++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
++ ;;
++esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
++$as_echo "${lt_sysroot:-no}" >&6; }
+
-+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-+func_append_quoted ()\
-+{\
-+\ func_quote_for_eval "${2}"\
-+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
+
-+ # Save a `func_append' function call where possible by direct use of '+='
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+else
-+ # Save a `func_append' function call even when '+=' is not available
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+fi
+
-+if test x"$_lt_function_replace_fail" = x":"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-+fi
-
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
-
-- mv -f "$cfgfile" "$ofile" ||
-+ mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
-Index: binutils-2.24/binutils/configure
-===================================================================
---- binutils-2.24.orig/binutils/configure 2013-11-04 07:33:37.000000000 -0800
-+++ binutils-2.24/binutils/configure 2013-12-15 11:10:23.877118697 -0800
-@@ -655,8 +655,11 @@
- LIPO
- NMEDIT
- DSYMUTIL
-+MANIFEST_TOOL
- RANLIB
-+ac_ct_AR
- AR
-+DLLTOOL
- OBJDUMP
- LN_S
- NM
-@@ -769,6 +772,7 @@
- with_pic
- enable_fast_install
- with_gnu_ld
-+with_libtool_sysroot
- enable_libtool_lock
- enable_targets
- enable_deterministic_archives
-@@ -1434,6 +1438,8 @@
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
-+ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
-+ (or the compiler's sysroot if not specified).
- --with-zlib include zlib support (auto/yes/no) default=auto
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
-@@ -5152,8 +5158,8 @@
-
-
-
--macro_version='2.2.7a'
--macro_revision='1.3134'
-+macro_version='2.4'
-+macro_revision='1.3293'
-
-
-
-@@ -5193,7 +5199,7 @@
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
- $as_echo_n "checking how to print strings... " >&6; }
- # Test print first, because it will be a builtin if present.
--if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
- elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -5879,8 +5885,8 @@
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-- = c,a/b,, \
-+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-+ = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-@@ -5929,6 +5935,80 @@
+ # Check whether --enable-libtool-lock was given.
+ if test "${enable_libtool_lock+set}" = set; then :
+@@ -7605,6 +7985,123 @@ esac
+ need_locks="$enable_libtool_lock"
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-+if test "${lt_cv_to_host_file_cmd+set}" = set; then :
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
++set dummy ${ac_tool_prefix}mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-+ ;;
-+ esac
-+ ;;
-+ *-*-cygwin* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-+ ;;
-+ esac
-+ ;;
-+ * ) # unhandled hosts (and "normal" native builds)
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+esac
++ if test -n "$MANIFEST_TOOL"; then
++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
++if test -n "$MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
++$as_echo "$MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
++ # Extract the first word of "mt", so it can be a program name with args.
++set dummy mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_MANIFEST_TOOL"; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
+
+fi
++fi
++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
++if test -n "$ac_ct_MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
+
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
++ if test "x$ac_ct_MANIFEST_TOOL" = x; then
++ MANIFEST_TOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ fi
++else
++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++fi
+
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
++if test "${lt_cv_path_mainfest_tool+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&5
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
++$as_echo "$lt_cv_path_mainfest_tool" >&6; }
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
+
+
+
+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-+if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ #assume ordinary cross tools, or native build.
-+lt_cv_to_tool_file_cmd=func_convert_file_noop
-+case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ esac
-+ ;;
-+esac
+
-+fi
+
+ case $host_os in
+ rhapsody* | darwin*)
+@@ -8168,6 +8665,8 @@ _LT_EOF
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
++ echo "$RANLIB libconftest.a" >&5
++ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+ int main() { return 0;}
+ _LT_EOF
+@@ -8236,6 +8735,16 @@ done
+
+
+
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
+
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+ # Set options
+@@ -8364,7 +8873,8 @@ fi
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+
+
+
+@@ -8453,7 +8963,7 @@ aix3*)
+ esac
+
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -8751,8 +9261,6 @@ fi
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
+
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8918,6 +9426,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -8980,7 +9494,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+@@ -9037,13 +9551,17 @@ case $host_os in
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+ esac
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
+-
+-
+-
+-
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -9104,6 +9622,11 @@ fi
+
+
+
+
+
+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
- $as_echo_n "checking for $LD option to reload object files... " >&6; }
- if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -5945,6 +6025,11 @@
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ if test "$GCC" != yes; then
-+ reload_cmds=false
-+ fi
-+ ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6113,7 +6198,8 @@
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
-- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ # Keep this pattern in sync with the one in func_win32_libid.
-+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-@@ -6267,6 +6353,21 @@
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
- $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
-+file_magic_glob=
-+want_nocaseglob=no
-+if test "$build" = "$host"; then
-+ case $host_os in
-+ mingw* | pw32*)
-+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-+ want_nocaseglob=yes
-+ else
-+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
-+ fi
-+ ;;
-+ esac
-+fi
+
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6282,9 +6383,162 @@
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -9454,7 +9977,8 @@ _LT_EOF
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -9502,7 +10026,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -9553,12 +10077,12 @@ _LT_EOF
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -9572,8 +10096,8 @@ _LT_EOF
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+@@ -9591,8 +10115,8 @@ _LT_EOF
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9638,8 +10162,8 @@ _LT_EOF
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
-+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$DLLTOOL"; then
-+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DLLTOOL=$ac_cv_prog_DLLTOOL
-+if test -n "$DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-+$as_echo "$DLLTOOL" >&6; }
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9769,7 +10293,13 @@ _LT_EOF
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DLLTOOL"; then
-+ ac_ct_DLLTOOL=$DLLTOOL
-+ # Extract the first word of "dlltool", so it can be a program name with args.
-+set dummy dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ if test -n "$ac_ct_DLLTOOL"; then
-+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -9782,22 +10312,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
-+done
-+ done
-+IFS=$as_save_IFS
+
+fi
-+fi
-+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-+if test -n "$ac_ct_DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-+$as_echo "$ac_ct_DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
+
-+ if test "x$ac_ct_DLLTOOL" = x; then
-+ DLLTOOL="false"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DLLTOOL=$ac_ct_DLLTOOL
-+ fi
-+else
-+ DLLTOOL="$ac_cv_prog_DLLTOOL"
++ aix_libpath=$lt_cv_aix_libpath_
+fi
-+
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-+if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -9809,7 +10346,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ lt_cv_sharedlib_from_linklib_cmd='unknown'
-+
-+case $host_os in
-+cygwin* | mingw* | pw32* | cegcc*)
-+ # two different shell functions defined in ltmain.sh
-+ # decide which to use based on capabilities of $DLLTOOL
-+ case `$DLLTOOL --help 2>&1` in
-+ *--identify-strict*)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-+ ;;
-+ *)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-+ ;;
-+ esac
-+ ;;
-+*)
-+ # fallback: assume linklib IS sharedlib
-+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-+ ;;
-+esac
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -9822,22 +10365,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
+
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-+
-+
-+
-+
-+
-+
+
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in ar
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6300,7 +6554,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6320,11 +6574,15 @@
- fi
++ aix_libpath=$lt_cv_aix_libpath_
++fi
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -9881,21 +10431,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+- # no search path for DLLs.
+- hardcode_libdir_flag_spec=' '
+- allow_undefined_flag=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- old_archive_from_new_cmds='true'
+- # FIXME: Should let the user specify the lib program.
+- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
+- enable_shared_with_static_runtimes=yes
++ # no search path for DLLs.
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
+ ;;
-+ test -n "$AR" && break
-+ done
- fi
--if test -z "$ac_cv_prog_AR"; then
-+if test -z "$AR"; then
- ac_ct_AR=$AR
-- # Extract the first word of "ar", so it can be a program name with args.
--set dummy ar; ac_word=$2
-+ for ac_prog in ar
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6340,7 +6598,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_ac_ct_AR="ar"
-+ ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6359,6 +6617,10 @@
- $as_echo "no" >&6; }
+ darwin* | rhapsody*)
+@@ -9956,7 +10549,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+@@ -9964,7 +10557,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hpux9*)
+ if test "$GCC" = yes; then
+- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -9980,7 +10573,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -10004,10 +10597,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -10086,23 +10679,36 @@ fi
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if test "${lt_cv_irix_exported_symbol+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-int foo(void) {}
++int foo (void) { return 0; }
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+-
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS="$save_LDFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -10187,7 +10793,7 @@ rm -f core conftest.err conftest.$ac_objext \
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+@@ -10206,9 +10812,9 @@ rm -f core conftest.err conftest.$ac_objext \
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -10784,8 +11390,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -10818,13 +11425,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
+
-+ test -n "$ac_ct_AR" && break
-+done
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
+
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
-@@ -6370,12 +6632,10 @@
- esac
- AR=$ac_ct_AR
- fi
--else
-- AR="$ac_cv_prog_AR"
- fi
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
-+: ${AR=ar}
-+: ${AR_FLAGS=cru}
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -10916,7 +11581,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+@@ -11712,7 +12377,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-#line 11715 "configure"
++#line $LINENO "configure"
+ #include "confdefs.h"
+ #if HAVE_DLFCN_H
+@@ -11756,10 +12421,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -11818,7 +12483,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-#line 11821 "configure"
++#line $LINENO "configure"
+ #include "confdefs.h"
-@@ -6387,6 +6647,64 @@
+ #if HAVE_DLFCN_H
+@@ -11862,10 +12527,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -12257,6 +12922,7 @@ $RM -r conftest*
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+@@ -12274,6 +12940,7 @@ $RM -r conftest*
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ compiler_CXX=$CC
+ for cc_temp in $compiler""; do
+@@ -12413,8 +13080,8 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-+$as_echo_n "checking for archiver @FILE support... " >&6; }
-+if test "${lt_cv_ar_at_file+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+@@ -12556,7 +13223,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
+ allow_undefined_flag_CXX='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
+else
-+ lt_cv_ar_at_file=no
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ echo conftest.$ac_objext > conftest.lst
-+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -eq 0; then
-+ # Ensure the archiver fails upon bogus file names.
-+ rm -f conftest.$ac_objext libconftest.a
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -ne 0; then
-+ lt_cv_ar_at_file=@
-+ fi
-+ fi
-+ rm -f conftest.* libconftest.a
-+
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-+$as_echo "$lt_cv_ar_at_file" >&6; }
-+
-+if test "x$lt_cv_ar_at_file" = xno; then
-+ archiver_list_spec=
++ if test "${lt_cv_aix_libpath__CXX+set}" = set; then :
++ $as_echo_n "(cached) " >&6
+else
-+ archiver_list_spec=$lt_cv_ar_at_file
-+fi
-+
-+
-+
-+
-+
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+
+ int
+@@ -12569,22 +13242,29 @@ main ()
+ _ACEOF
+ if ac_fn_cxx_try_link "$LINENO"; then :
+
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath__CXX"; then
++ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath__CXX"; then
++ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
++ fi
+
++fi
+
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
-@@ -6721,8 +7039,8 @@
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++ aix_libpath=$lt_cv_aix_libpath__CXX
++fi
- # Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
--lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Handle CRLF in mingw tool chain
- opt_cr=
-@@ -6758,6 +7076,7 @@
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
-+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+@@ -12597,7 +13277,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath__CXX+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -6799,6 +7118,18 @@
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT_DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT_DLSYM_CONST
-+#else
-+# define LT_DLSYM_CONST const
-+#endif
-+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -6810,7 +7141,7 @@
- cat <<_LT_EOF >> conftest.$ac_ext
+ int
+@@ -12610,22 +13296,29 @@ main ()
+ _ACEOF
+ if ac_fn_cxx_try_link "$LINENO"; then :
- /* The mapping between symbol names and symbols. */
--const struct {
-+LT_DLSYM_CONST struct {
- const char *name;
- void *address;
- }
-@@ -6836,8 +7167,8 @@
- _LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-+ lt_globsym_save_LIBS=$LIBS
-+ lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -6847,8 +7178,8 @@
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-+ LIBS=$lt_globsym_save_LIBS
-+ CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
-@@ -6885,6 +7216,19 @@
- $as_echo "ok" >&6; }
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath__CXX"; then
++ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
fi
-
-+# Response file support.
-+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-+ nm_file_list_spec='@'
-+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
-+ nm_file_list_spec='@'
-+fi
-+
-+
-+
-+
-+
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath__CXX"; then
++ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
++ fi
+
++fi
+
++ aix_libpath=$lt_cv_aix_libpath__CXX
++fi
+ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -12668,29 +13361,75 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ ;;
-
-@@ -6905,6 +7249,42 @@
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+- # as there is no search path for DLLs.
+- hardcode_libdir_flag_spec_CXX='-L$libdir'
+- export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+- allow_undefined_flag_CXX=unsupported
+- always_export_symbols_CXX=no
+- enable_shared_with_static_runtimes_CXX=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- ld_shlibs_CXX=no
+- fi
+- ;;
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ hardcode_libdir_flag_spec_CXX=' '
++ allow_undefined_flag_CXX=unsupported
++ always_export_symbols_CXX=yes
++ file_list_spec_CXX='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
++ enable_shared_with_static_runtimes_CXX=yes
++ # Don't use ranlib
++ old_postinstall_cmds_CXX='chmod 644 $oldlib'
++ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
++ # as there is no search path for DLLs.
++ hardcode_libdir_flag_spec_CXX='-L$libdir'
++ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
++ allow_undefined_flag_CXX=unsupported
++ always_export_symbols_CXX=no
++ enable_shared_with_static_runtimes_CXX=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ ld_shlibs_CXX=no
++ fi
++ ;;
++ esac
++ ;;
+ darwin* | rhapsody*)
+@@ -12796,7 +13535,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ ld_shlibs_CXX=no
+@@ -12867,10 +13606,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -12911,9 +13650,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ link_all_deplibs_CXX=yes
+@@ -12983,20 +13722,20 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ prelink_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ old_archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ archive_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+@@ -13191,7 +13930,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-+$as_echo_n "checking for sysroot... " >&6; }
-+
-+# Check whether --with-libtool-sysroot was given.
-+if test "${with_libtool_sysroot+set}" = set; then :
-+ withval=$with_libtool_sysroot;
-+else
-+ with_libtool_sysroot=no
-+fi
-+
-+
-+lt_sysroot=
-+case ${with_libtool_sysroot} in #(
-+ yes)
-+ if test "$GCC" = yes; then
-+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-+ fi
-+ ;; #(
-+ /*)
-+ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
-+ ;; #(
-+ no|'')
-+ ;; #(
-+ *)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
-+$as_echo "${with_libtool_sysroot}" >&6; }
-+ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
-+ ;;
-+esac
-+
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-+$as_echo "${lt_sysroot:-no}" >&6; }
-+
-+
-+
-+
+@@ -13237,7 +13976,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # Check whether --enable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then :
-@@ -7112,6 +7492,123 @@
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
+ no_undefined_flag_CXX=' -zdefs'
+@@ -13278,9 +14017,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
- need_locks="$enable_libtool_lock"
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -13415,6 +14154,13 @@ private:
+ };
+ _LT_EOF
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$MANIFEST_TOOL"; then
-+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-+if test -n "$MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-+$as_echo "$MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
-+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
-+ # Extract the first word of "mt", so it can be a program name with args.
-+set dummy mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-+if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
+
-+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
-+ MANIFEST_TOOL=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
-+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
-+ fi
-+else
-+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
-+fi
-+
-+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-+if test "${lt_cv_path_mainfest_tool+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_path_mainfest_tool=no
-+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
-+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-+ cat conftest.err >&5
-+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-+ lt_cv_path_mainfest_tool=yes
-+ fi
-+ rm -f conftest*
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-+if test "x$lt_cv_path_mainfest_tool" != xyes; then
-+ MANIFEST_TOOL=:
-+fi
-+
-+
-+
-+
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+@@ -13428,7 +14174,7 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ pre_test_object_deps_done=no
- case $host_os in
- rhapsody* | darwin*)
-@@ -7675,6 +8172,8 @@
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
-+ echo "$RANLIB libconftest.a" >&5
-+ $RANLIB libconftest.a 2>&5
- cat > conftest.c << _LT_EOF
- int main() { return 0;}
- _LT_EOF
-@@ -7870,7 +8369,8 @@
- LIBTOOL_DEPS="$ltmain"
+ for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++ case ${prev}${p} in
- # Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+LIBTOOL='$(SHELL) $(top_builddir)'
-+LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+@@ -13437,13 +14183,22 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ test $p = "-R"; then
+ prev=$p
+ continue
+- else
+- prev=
+ fi
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
+ if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
++ case ${prev} in
++ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+@@ -13463,8 +14218,10 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ fi
+ fi
++ prev=
+ ;;
++ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+@@ -13500,6 +14257,7 @@ else
+ fi
-@@ -7959,7 +8459,7 @@
- esac
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
+ # PORTME: override above test on systems where it is broken
+ case $host_os in
+@@ -13535,7 +14293,7 @@ linux*)
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8257,8 +8757,6 @@
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -13600,8 +14358,6 @@ fi
+ lt_prog_compiler_pic_CXX=
+ lt_prog_compiler_static_CXX=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
-@@ -8424,6 +8922,12 @@
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -13706,6 +14462,11 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ ;;
+ esac
;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ lt_prog_compiler_wl='-Wl,-Wl,,'
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -8486,7 +8990,7 @@
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
-@@ -8543,13 +9047,17 @@
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ dgux*)
+ case $cc_basename in
+ ec++*)
+@@ -13858,7 +14619,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ lt_prog_compiler_pic_CXX='-KPIC'
+ lt_prog_compiler_static_CXX='-Bstatic'
+@@ -13923,10 +14684,17 @@ case $host_os in
+ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
;;
esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
--$as_echo "$lt_prog_compiler_pic" >&6; }
--
--
--
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
+-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++if test "${lt_cv_prog_compiler_pic_CXX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
++$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
++lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
#
# Check to make sure the PIC flag actually works.
-@@ -8610,6 +9118,11 @@
+@@ -13984,6 +14752,8 @@ fi
+
+
-+
-+
-+
#
# Check to make sure the static flag actually works.
#
-@@ -8960,7 +9473,8 @@
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
-- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+@@ -14161,6 +14931,7 @@ fi
+ $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -9008,7 +9522,7 @@
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -9059,12 +9573,12 @@
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
-- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
-@@ -9078,8 +9592,8 @@
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ case $host_os in
+ aix[4-9]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+@@ -14175,15 +14946,20 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
+ ;;
+ pw32*)
+ export_symbols_cmds_CXX="$ltdll_cmds"
+- ;;
++ ;;
+ cygwin* | mingw* | cegcc*)
+- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ case $cc_basename in
++ cl*) ;;
++ *)
++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
++ ;;
++ esac
++ ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ ;;
+ esac
+- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-@@ -9097,8 +9611,8 @@
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+ $as_echo "$ld_shlibs_CXX" >&6; }
+@@ -14446,8 +15222,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
- _LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9144,8 +9658,8 @@
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -14479,13 +15256,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9275,7 +9789,13 @@
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -14576,7 +15411,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
- int
-@@ -9288,22 +9808,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+@@ -15035,6 +15870,7 @@ fi
+ fi # test -n "$compiler"
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
+ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+@@ -17807,13 +18643,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+ lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+ lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+ lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+ reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+ reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+ OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+ deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+ file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+ AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+ AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+ STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+ RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+ old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+@@ -17828,14 +18671,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
+ lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+ objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+ MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+ lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+ need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+ DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+ NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+ LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+@@ -17868,12 +18714,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
+ hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+ inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+ link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
+ always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+ export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+ exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+ include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+ prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+ file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+ variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+ need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+@@ -17912,8 +18758,8 @@ old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote
+ compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+ GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+-lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+ lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+ lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+ archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+@@ -17940,12 +18786,12 @@ hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_
+ hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+ inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+ link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+-fix_srcfile_path_CXX='`$ECHO "$fix_srcfile_path_CXX" | $SED "$delay_single_quote_subst"`'
+ always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+ export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+ exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+ include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+ prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
++postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+ file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+ hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+ compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+@@ -17983,8 +18829,13 @@ reload_flag \
+ OBJDUMP \
+ deplibs_check_method \
+ file_magic_cmd \
++file_magic_glob \
++want_nocaseglob \
++DLLTOOL \
++sharedlib_from_linklib_cmd \
+ AR \
+ AR_FLAGS \
++archiver_list_spec \
+ STRIP \
+ RANLIB \
+ CC \
+@@ -17994,12 +18845,14 @@ lt_cv_sys_global_symbol_pipe \
+ lt_cv_sys_global_symbol_to_cdecl \
+ lt_cv_sys_global_symbol_to_c_name_address \
+ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
++nm_file_list_spec \
+ lt_prog_compiler_no_builtin_flag \
+-lt_prog_compiler_wl \
+ lt_prog_compiler_pic \
++lt_prog_compiler_wl \
+ lt_prog_compiler_static \
+ lt_cv_prog_compiler_c_o \
+ need_locks \
++MANIFEST_TOOL \
+ DSYMUTIL \
+ NMEDIT \
+ LIPO \
+@@ -18015,7 +18868,6 @@ no_undefined_flag \
+ hardcode_libdir_flag_spec \
+ hardcode_libdir_flag_spec_ld \
+ hardcode_libdir_separator \
+-fix_srcfile_path \
+ exclude_expsyms \
+ include_expsyms \
+ file_list_spec \
+@@ -18037,8 +18889,8 @@ LD_CXX \
+ reload_flag_CXX \
+ compiler_CXX \
+ lt_prog_compiler_no_builtin_flag_CXX \
+-lt_prog_compiler_wl_CXX \
+ lt_prog_compiler_pic_CXX \
++lt_prog_compiler_wl_CXX \
+ lt_prog_compiler_static_CXX \
+ lt_cv_prog_compiler_c_o_CXX \
+ export_dynamic_flag_spec_CXX \
+@@ -18050,7 +18902,6 @@ no_undefined_flag_CXX \
+ hardcode_libdir_flag_spec_CXX \
+ hardcode_libdir_flag_spec_ld_CXX \
+ hardcode_libdir_separator_CXX \
+-fix_srcfile_path_CXX \
+ exclude_expsyms_CXX \
+ include_expsyms_CXX \
+ file_list_spec_CXX \
+@@ -18084,6 +18935,7 @@ module_cmds \
+ module_expsym_cmds \
+ export_symbols_cmds \
+ prelink_cmds \
++postlink_cmds \
+ postinstall_cmds \
+ postuninstall_cmds \
+ finish_cmds \
+@@ -18098,7 +18950,8 @@ archive_expsym_cmds_CXX \
+ module_cmds_CXX \
+ module_expsym_cmds_CXX \
+ export_symbols_cmds_CXX \
+-prelink_cmds_CXX; do
++prelink_cmds_CXX \
++postlink_cmds_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+@@ -18891,7 +19744,8 @@ $as_echo X"$file" |
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -18994,19 +19848,42 @@ SP2NL=$lt_lt_SP2NL
+ # turn newlines into spaces.
+ NL2SP=$lt_lt_NL2SP
+
++# convert \$build file names to \$host format.
++to_host_file_cmd=$lt_cv_to_host_file_cmd
+
-+fi
++# convert \$build files to toolchain format.
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+ # An object symbol dumper.
+ OBJDUMP=$lt_OBJDUMP
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9315,7 +9842,13 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+ # Method to check whether dependent libraries are shared objects.
+ deplibs_check_method=$lt_deplibs_check_method
- int
-@@ -9328,22 +9861,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+-# Command to use when deplibs_check_method == "file_magic".
++# Command to use when deplibs_check_method = "file_magic".
+ file_magic_cmd=$lt_file_magic_cmd
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
++# How to find potential files when deplibs_check_method = "file_magic".
++file_magic_glob=$lt_file_magic_glob
+
-+fi
++# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
++want_nocaseglob=$lt_want_nocaseglob
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
++# DLL creation program.
++DLLTOOL=$lt_DLLTOOL
++
++# Command to associate shared and link libraries.
++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
++
+ # The archiver.
+ AR=$lt_AR
++
++# Flags to create an archive.
+ AR_FLAGS=$lt_AR_FLAGS
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -9388,20 +9928,63 @@
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
-- hardcode_libdir_flag_spec=' '
-- allow_undefined_flag=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- old_archive_from_new_cmds='true'
-- # FIXME: Should let the user specify the lib program.
-- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- enable_shared_with_static_runtimes=yes
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ file_list_spec='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ old_postinstall_cmds='chmod 644 $oldlib'
-+ postlink_cmds='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_from_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+ esac
- ;;
++# How to feed a file listing to the archiver.
++archiver_list_spec=$lt_archiver_list_spec
++
+ # A symbol stripping program.
+ STRIP=$lt_STRIP
- darwin* | rhapsody*)
-@@ -9462,7 +10045,7 @@
+@@ -19036,6 +19913,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+ # Transform the output of nm in a C name address pair when lib prefix is needed.
+ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-@@ -9470,7 +10053,7 @@
++# Specify filename containing input files for \$NM.
++nm_file_list_spec=$lt_nm_file_list_spec
++
++# The root where to search for dependent libraries,and in which our libraries should be installed.
++lt_sysroot=$lt_sysroot
++
+ # The name of the directory that contains temporary libtool files.
+ objdir=$objdir
- hpux9*)
- if test "$GCC" = yes; then
-- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
-@@ -9486,7 +10069,7 @@
+@@ -19045,6 +19928,9 @@ MAGIC_CMD=$MAGIC_CMD
+ # Must we lock files when doing compilation?
+ need_locks=$lt_need_locks
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
-@@ -9510,10 +10093,10 @@
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
-@@ -9592,23 +10175,36 @@
++# Manifest tool.
++MANIFEST_TOOL=$lt_MANIFEST_TOOL
++
+ # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+ DSYMUTIL=$lt_DSYMUTIL
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-+if test "${lt_cv_irix_exported_symbol+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
--int foo(void) {}
-+int foo (void) { return 0; }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+@@ -19159,12 +20045,12 @@ with_gcc=$GCC
+ # Compiler flag to turn off builtin functions.
+ no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+-# How to pass a linker flag through the compiler.
+-wl=$lt_lt_prog_compiler_wl
+-
+ # Additional compiler flags for building library objects.
+ pic_flag=$lt_lt_prog_compiler_pic
+
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
+ # Compiler flag to prevent dynamic linking.
+ link_static_flag=$lt_lt_prog_compiler_static
+
+@@ -19251,9 +20137,6 @@ inherit_rpath=$inherit_rpath
+ # Whether libtool must link a program against all its dependency libraries.
+ link_all_deplibs=$link_all_deplibs
+
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path=$lt_fix_srcfile_path
-
-+ lt_cv_irix_exported_symbol=yes
-+else
-+ lt_cv_irix_exported_symbol=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-- LDFLAGS="$save_LDFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-+ fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -9693,7 +10289,7 @@
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
-@@ -9712,9 +10308,9 @@
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -10290,8 +10886,9 @@
- need_version=no
- need_lib_prefix=no
+ # Set to "yes" if exported symbols are required.
+ always_export_symbols=$always_export_symbols
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -10324,13 +10921,71 @@
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
-+ ;;
+@@ -19269,6 +20152,9 @@ include_expsyms=$lt_include_expsyms
+ # Commands necessary for linking programs (against libraries) with templates.
+ prelink_cmds=$lt_prelink_cmds
+
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds
++
+ # Specify filename containing input files.
+ file_list_spec=$lt_file_list_spec
+
+@@ -19315,210 +20201,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $* ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
+-
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+-}
+-
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+- esac
+-}
+-
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[^=]*=//'
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$@"`
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
+-
+-_LT_EOF
+-esac
+-
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1+=\$2"
+-}
+-_LT_EOF
+- ;;
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$1=\$$1\$2"
+-}
+-
+-_LT_EOF
+- ;;
+- esac
+-
+-
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
++ if test x"$xsi_shell" = xyes; then
++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
++func_dirname ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
-
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -10422,7 +11077,7 @@
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-@@ -11262,10 +11917,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
-
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11368,10 +12023,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
-
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -14948,13 +15603,20 @@
- lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
- lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
- lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
- reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
- reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
- OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
- deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
- file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
- AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
- AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
- STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
- RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
- old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -14969,14 +15631,17 @@
- lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
- objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
- MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
--lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
- lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
- need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
- DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
- NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
- LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -15009,12 +15674,12 @@
- hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
- inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
- link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
--fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
- always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
- export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
- exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
- include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
- prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
- file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
- variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
- need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -15069,8 +15734,13 @@
- OBJDUMP \
- deplibs_check_method \
- file_magic_cmd \
-+file_magic_glob \
-+want_nocaseglob \
-+DLLTOOL \
-+sharedlib_from_linklib_cmd \
- AR \
- AR_FLAGS \
-+archiver_list_spec \
- STRIP \
- RANLIB \
- CC \
-@@ -15080,12 +15750,14 @@
- lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-+nm_file_list_spec \
- lt_prog_compiler_no_builtin_flag \
--lt_prog_compiler_wl \
- lt_prog_compiler_pic \
-+lt_prog_compiler_wl \
- lt_prog_compiler_static \
- lt_cv_prog_compiler_c_o \
- need_locks \
-+MANIFEST_TOOL \
- DSYMUTIL \
- NMEDIT \
- LIPO \
-@@ -15101,7 +15773,6 @@
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
--fix_srcfile_path \
- exclude_expsyms \
- include_expsyms \
- file_list_spec \
-@@ -15137,6 +15808,7 @@
- module_expsym_cmds \
- export_symbols_cmds \
- prelink_cmds \
-+postlink_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- finish_cmds \
-@@ -15894,7 +16566,8 @@
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
- #
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is part of GNU Libtool.
-@@ -15997,19 +16670,42 @@
- # turn newlines into spaces.
- NL2SP=$lt_lt_NL2SP
-
-+# convert \$build file names to \$host format.
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
++ sed -e '/^func_basename ()$/,/^} # func_basename /c\
++func_basename ()\
++{\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
++func_dirname_and_basename ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# convert \$build files to toolchain format.
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
- # An object symbol dumper.
- OBJDUMP=$lt_OBJDUMP
-
- # Method to check whether dependent libraries are shared objects.
- deplibs_check_method=$lt_deplibs_check_method
-
--# Command to use when deplibs_check_method == "file_magic".
-+# Command to use when deplibs_check_method = "file_magic".
- file_magic_cmd=$lt_file_magic_cmd
-
-+# How to find potential files when deplibs_check_method = "file_magic".
-+file_magic_glob=$lt_file_magic_glob
++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
++func_stripname ()\
++{\
++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
++\ # positional parameters, so assign one to ordinary parameter first.\
++\ func_stripname_result=${3}\
++\ func_stripname_result=${func_stripname_result#"${1}"}\
++\ func_stripname_result=${func_stripname_result%"${2}"}\
++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-+want_nocaseglob=$lt_want_nocaseglob
+
-+# DLL creation program.
-+DLLTOOL=$lt_DLLTOOL
++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
++func_split_long_opt ()\
++{\
++\ func_split_long_opt_name=${1%%=*}\
++\ func_split_long_opt_arg=${1#*=}\
++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# Command to associate shared and link libraries.
-+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
- # The archiver.
- AR=$lt_AR
++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
++func_split_short_opt ()\
++{\
++\ func_split_short_opt_arg=${1#??}\
++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# Flags to create an archive.
- AR_FLAGS=$lt_AR_FLAGS
-
-+# How to feed a file listing to the archiver.
-+archiver_list_spec=$lt_archiver_list_spec
+
- # A symbol stripping program.
- STRIP=$lt_STRIP
-
-@@ -16039,6 +16735,12 @@
- # Transform the output of nm in a C name address pair when lib prefix is needed.
- global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-+# Specify filename containing input files for \$NM.
-+nm_file_list_spec=$lt_nm_file_list_spec
++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
++func_lo2o ()\
++{\
++\ case ${1} in\
++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
++\ *) func_lo2o_result=${1} ;;\
++\ esac\
++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
-+# The root where to search for dependent libraries,and in which our libraries should be installed.
-+lt_sysroot=$lt_sysroot
+
- # The name of the directory that contains temporary libtool files.
- objdir=$objdir
-
-@@ -16048,6 +16750,9 @@
- # Must we lock files when doing compilation?
- need_locks=$lt_need_locks
-
-+# Manifest tool.
-+MANIFEST_TOOL=$lt_MANIFEST_TOOL
++ sed -e '/^func_xform ()$/,/^} # func_xform /c\
++func_xform ()\
++{\
++ func_xform_result=${1%.*}.lo\
++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
+
- # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
- DSYMUTIL=$lt_DSYMUTIL
++
++ sed -e '/^func_arith ()$/,/^} # func_arith /c\
++func_arith ()\
++{\
++ func_arith_result=$(( $* ))\
++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_len ()$/,/^} # func_len /c\
++func_len ()\
++{\
++ func_len_result=${#1}\
++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++fi
++
++if test x"$lt_shell_append" = xyes; then
++ sed -e '/^func_append ()$/,/^} # func_append /c\
++func_append ()\
++{\
++ eval "${1}+=\\${2}"\
++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
++func_append_quoted ()\
++{\
++\ func_quote_for_eval "${2}"\
++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
++fi
++
++
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
-@@ -16162,12 +16867,12 @@
+@@ -19546,12 +20391,12 @@ with_gcc=$GCC_CXX
# Compiler flag to turn off builtin functions.
- no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+ no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-# How to pass a linker flag through the compiler.
--wl=$lt_lt_prog_compiler_wl
+-wl=$lt_lt_prog_compiler_wl_CXX
-
# Additional compiler flags for building library objects.
- pic_flag=$lt_lt_prog_compiler_pic
+ pic_flag=$lt_lt_prog_compiler_pic_CXX
+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
++wl=$lt_lt_prog_compiler_wl_CXX
+
# Compiler flag to prevent dynamic linking.
- link_static_flag=$lt_lt_prog_compiler_static
+ link_static_flag=$lt_lt_prog_compiler_static_CXX
-@@ -16254,9 +16959,6 @@
+@@ -19638,9 +20483,6 @@ inherit_rpath=$inherit_rpath_CXX
# Whether libtool must link a program against all its dependency libraries.
- link_all_deplibs=$link_all_deplibs
+ link_all_deplibs=$link_all_deplibs_CXX
-# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path=$lt_fix_srcfile_path
+-fix_srcfile_path=$lt_fix_srcfile_path_CXX
-
# Set to "yes" if exported symbols are required.
- always_export_symbols=$always_export_symbols
+ always_export_symbols=$always_export_symbols_CXX
-@@ -16272,6 +16974,9 @@
+@@ -19656,6 +20498,9 @@ include_expsyms=$lt_include_expsyms_CXX
# Commands necessary for linking programs (against libraries) with templates.
- prelink_cmds=$lt_prelink_cmds
+ prelink_cmds=$lt_prelink_cmds_CXX
+
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds_CXX
++
+ # Specify filename containing input files.
+ file_list_spec=$lt_file_list_spec_CXX
+
+diff --git a/libtool.m4 b/libtool.m4
+index 797468f..02b15b3 100644
+--- a/libtool.m4
++++ b/libtool.m4
+@@ -1,7 +1,8 @@
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+ #
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is free software; the Free Software Foundation gives
+@@ -10,7 +11,8 @@
+
+ m4_define([_LT_COPYING], [dnl
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
++# Inc.
+ # Written by Gordon Matzigkeit, 1996
+ #
+ # This file is part of GNU Libtool.
+@@ -37,7 +39,7 @@ m4_define([_LT_COPYING], [dnl
+ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ ])
+
+-# serial 56 LT_INIT
++# serial 57 LT_INIT
+
+
+ # LT_PREREQ(VERSION)
+@@ -92,7 +94,8 @@ _LT_SET_OPTIONS([$0], [$1])
+ LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+ AC_SUBST(LIBTOOL)dnl
+
+ _LT_SETUP
+@@ -166,10 +169,13 @@ _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+ dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+ m4_require([_LT_CMD_RELOAD])dnl
+ m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+ m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
+
+ _LT_CONFIG_LIBTOOL_INIT([
+ # See if we are running on zsh, and set the options which allow our
+@@ -199,7 +205,7 @@ aix3*)
+ esac
+
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -632,7 +638,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+ configured by $[0], generated by m4_PACKAGE_STRING.
-+# Commands necessary for finishing linking programs.
-+postlink_cmds=$lt_postlink_cmds
-+
- # Specify filename containing input files.
- file_list_spec=$lt_file_list_spec
+-Copyright (C) 2009 Free Software Foundation, Inc.
++Copyright (C) 2010 Free Software Foundation, Inc.
+ This config.lt script is free software; the Free Software Foundation
+ gives unlimited permision to copy, distribute and modify it."
-@@ -16304,210 +17009,169 @@
+@@ -746,15 +752,12 @@ _LT_EOF
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
--
-- case $xsi_shell in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result="${1##*/}"
--}
--
--# func_dirname_and_basename file append nondir_replacement
--# perform func_basename and func_dirname in a single function
--# call:
--# dirname: Compute the dirname of FILE. If nonempty,
--# add APPEND to the result, otherwise set result
--# to NONDIR_REPLACEMENT.
--# value returned in "$func_dirname_result"
--# basename: Compute filename of FILE.
--# value retuned in "$func_basename_result"
--# Implementation must be kept synchronized with func_dirname
--# and func_basename. For efficiency, we do not delegate to
--# those functions but instead duplicate the functionality here.
--func_dirname_and_basename ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
-- func_basename_result="${1##*/}"
--}
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--func_stripname ()
--{
-- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-- # positional parameters, so assign one to ordinary parameter first.
-- func_stripname_result=${3}
-- func_stripname_result=${func_stripname_result#"${1}"}
-- func_stripname_result=${func_stripname_result%"${2}"}
--}
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=${1%%=*}
-- func_opt_split_arg=${1#*=}
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- case ${1} in
-- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-- *) func_lo2o_result=${1} ;;
-- esac
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=${1%.*}.lo
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=$(( $* ))
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=${#1}
--}
--
--_LT_EOF
-- ;;
-- *) # Bourne compatible functions.
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- # Extract subdirectory from the argument.
-- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-- if test "X$func_dirname_result" = "X${1}"; then
-- func_dirname_result="${3}"
-- else
-- func_dirname_result="$func_dirname_result${2}"
-- fi
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
--}
--
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--# func_strip_suffix prefix name
--func_stripname ()
--{
-- case ${2} in
-- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-- esac
--}
--
--# sed scripts:
--my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
--my_sed_long_arg='1s/^-[^=]*=//'
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=`expr "$@"`
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
--}
--
--_LT_EOF
--esac
--
--case $lt_shell_append in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1+=\$2"
--}
--_LT_EOF
-- ;;
-- *)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1=\$$1\$2"
--}
--
--_LT_EOF
-- ;;
-- esac
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
-+ if test x"$xsi_shell" = xyes; then
-+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-+func_dirname ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
-+func_basename ()\
-+{\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
+- _LT_PROG_XSI_SHELLFNS
++ _LT_PROG_REPLACE_SHELLFNS
+
+- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+- || (rm -f "$cfgfile"; exit 1)
+-
+- mv -f "$cfgfile" "$ofile" ||
++ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+ ],
+@@ -980,6 +983,8 @@ _LT_EOF
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+ int main() { return 0;}
+ _LT_EOF
+@@ -1069,30 +1074,41 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
+ fi
+ ])
+
+-# _LT_SYS_MODULE_PATH_AIX
+-# -----------------------
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
+ # Links a minimal program and checks the executable
+ # for the system default hardcoded library path. In most cases,
+ # this is /usr/lib:/lib, but when the MPI compilers are used
+ # the location of the communication and MPI libs are included too.
+ # If we don't find anything, use the default library path according
+ # to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
+ m4_defun([_LT_SYS_MODULE_PATH_AIX],
+ [m4_require([_LT_DECL_SED])dnl
+-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++ lt_aix_libpath_sed='[
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }]'
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi],[])
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++ fi
++ ])
++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
+ ])# _LT_SYS_MODULE_PATH_AIX
+
+
+@@ -1117,7 +1133,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+ AC_MSG_CHECKING([how to print strings])
+ # Test print first, because it will be a builtin if present.
+-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+ elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+@@ -1161,6 +1177,39 @@ _LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+ ])# _LT_PROG_ECHO_BACKSLASH
+
+
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([libtool-sysroot],
++[ --with-libtool-sysroot[=DIR] Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).],
++[], [with_libtool_sysroot=no])
+
-+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-+func_dirname_and_basename ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++dnl lt_sysroot will always be passed unquoted. We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_libtool_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ AC_MSG_RESULT([${with_libtool_sysroot}])
++ AC_MSG_ERROR([The sysroot must be an absolute path.])
++ ;;
++esac
+
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
+
-+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-+func_stripname ()\
-+{\
-+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-+\ # positional parameters, so assign one to ordinary parameter first.\
-+\ func_stripname_result=${3}\
-+\ func_stripname_result=${func_stripname_result#"${1}"}\
-+\ func_stripname_result=${func_stripname_result%"${2}"}\
-+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+ # _LT_ENABLE_LOCK
+ # ---------------
+ m4_defun([_LT_ENABLE_LOCK],
+@@ -1320,14 +1369,47 @@ need_locks="$enable_libtool_lock"
+ ])# _LT_ENABLE_LOCK
+
+
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++ [lt_cv_ar_at_file=no
++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++ [echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++ ])
++ ])
+
-+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-+func_split_long_opt ()\
-+{\
-+\ func_split_long_opt_name=${1%%=*}\
-+\ func_split_long_opt_arg=${1#*=}\
-+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++ [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
+
+
-+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-+func_split_short_opt ()\
-+{\
-+\ func_split_short_opt_arg=${1#??}\
-+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+ # _LT_CMD_OLD_ARCHIVE
+ # -------------------
+ m4_defun([_LT_CMD_OLD_ARCHIVE],
+-[AC_CHECK_TOOL(AR, ar, false)
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-_LT_DECL([], [AR], [1], [The archiver])
+-_LT_DECL([], [AR_FLAGS], [1])
++[_LT_PROG_AR
+
+ AC_CHECK_TOOL(STRIP, strip, :)
+ test -z "$STRIP" && STRIP=:
+@@ -1623,7 +1705,7 @@ else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+-[#line __oline__ "configure"
++[#line $LINENO "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -1667,10 +1749,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
+
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -2210,8 +2292,9 @@ cygwin* | mingw* | pw32* | cegcc*)
+ need_version=no
+ need_lib_prefix=no
+
+- case $GCC,$host_os in
+- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+@@ -2244,13 +2327,71 @@ m4_if([$1], [],[
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
+
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
+
-+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-+func_lo2o ()\
-+{\
-+\ case ${1} in\
-+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-+\ *) func_lo2o_result=${1} ;;\
-+\ esac\
-+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
+
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
++ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+- dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+@@ -2342,7 +2483,7 @@ haiku*)
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+@@ -2950,6 +3091,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -3016,7 +3162,8 @@ mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+@@ -3167,6 +3314,21 @@ tpf*)
+ ;;
+ esac
+ ])
+
-+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
-+func_xform ()\
-+{\
-+ func_xform_result=${1%.*}.lo\
-+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
+
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -3174,7 +3336,11 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+ _LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+ _LT_DECL([], [file_magic_cmd], [1],
+- [Command to use when deplibs_check_method == "file_magic"])
++ [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++ [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+ ])# _LT_CHECK_MAGIC_METHOD
+
+
+@@ -3277,6 +3443,67 @@ dnl aclocal-1.4 backwards compatibility:
+ dnl AC_DEFUN([AM_PROG_NM], [])
+ dnl AC_DEFUN([AC_PROG_NM], [])
+
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
-+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
-+func_arith ()\
-+{\
-+ func_arith_result=$(( $* ))\
-+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++ [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
-+ sed -e '/^func_len ()$/,/^} # func_len /c\
-+func_len ()\
-+{\
-+ func_len_result=${#1}\
-+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++ [lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
+fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
+
-+if test x"$lt_shell_append" = xyes; then
-+ sed -e '/^func_append ()$/,/^} # func_append /c\
-+func_append ()\
-+{\
-+ eval "${1}+=\\${2}"\
-+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-+func_append_quoted ()\
-+{\
-+\ func_quote_for_eval "${2}"\
-+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
+
+ # LT_LIB_M
+ # --------
+@@ -3403,8 +3630,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -3440,6 +3667,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -3473,6 +3701,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT@&t at _DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT@&t at _DLSYM_CONST
++#else
++# define LT@&t at _DLSYM_CONST const
++#endif
+
-+ # Save a `func_append' function call where possible by direct use of '+='
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+else
-+ # Save a `func_append' function call even when '+=' is not available
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -3484,7 +3724,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT@&t at _DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -3510,15 +3750,15 @@ static const void *lt_preloaded_setup() {
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+@@ -3551,6 +3791,13 @@ else
+ AC_MSG_RESULT(ok)
+ fi
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++ nm_file_list_spec='@'
+fi
+
-+if test x"$_lt_function_replace_fail" = x":"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-+fi
+ _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+ _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+@@ -3561,6 +3808,8 @@ _LT_DECL([global_symbol_to_c_name_address],
+ _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++ [Specify filename containing input files for $NM])
+ ]) # _LT_CMD_GLOBAL_SYMBOLS
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
-- mv -f "$cfgfile" "$ofile" ||
-+ mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
+@@ -3572,7 +3821,6 @@ _LT_TAGVAR(lt_prog_compiler_wl, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
-Index: binutils-2.24/gas/configure
-===================================================================
---- binutils-2.24.orig/gas/configure 2013-11-04 07:33:37.000000000 -0800
-+++ binutils-2.24/gas/configure 2013-12-15 11:10:23.880452030 -0800
-@@ -645,8 +645,11 @@
- LIPO
- NMEDIT
- DSYMUTIL
-+MANIFEST_TOOL
- RANLIB
-+ac_ct_AR
- AR
-+DLLTOOL
- OBJDUMP
- LN_S
- NM
-@@ -759,6 +762,7 @@
- with_pic
- enable_fast_install
- with_gnu_ld
-+with_libtool_sysroot
- enable_libtool_lock
- enable_targets
- enable_checking
-@@ -1420,6 +1424,8 @@
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
-+ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
-+ (or the compiler's sysroot if not specified).
- --with-zlib include zlib support (auto/yes/no) default=auto
+-AC_MSG_CHECKING([for $compiler option to produce PIC])
+ m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+@@ -3678,6 +3926,12 @@ m4_if([$1], [CXX], [
+ ;;
+ esac
+ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+@@ -3830,7 +4084,7 @@ m4_if([$1], [CXX], [
+ ;;
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+@@ -4053,6 +4307,12 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -4115,7 +4375,7 @@ m4_if([$1], [CXX], [
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+@@ -4172,9 +4432,11 @@ case $host_os in
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+ esac
+-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+- [How to pass a linker flag through the compiler])
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
- Some influential environment variables:
-@@ -5135,8 +5141,8 @@
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -4193,6 +4455,8 @@ fi
+ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++ [How to pass a linker flag through the compiler])
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -4213,6 +4477,7 @@ _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ m4_defun([_LT_LINKER_SHLIBS],
+ [AC_REQUIRE([LT_PATH_LD])dnl
+ AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
+ m4_require([_LT_DECL_SED])dnl
+@@ -4221,6 +4486,7 @@ m4_require([_LT_TAG_COMPILER])dnl
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+@@ -4235,15 +4501,20 @@ m4_if([$1], [CXX], [
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+- ;;
++ ;;
+ cygwin* | mingw* | cegcc*)
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ case $cc_basename in
++ cl*) ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++ ;;
++ esac
++ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+- ;;
++ ;;
+ esac
+- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ ], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+@@ -4411,7 +4682,8 @@ _LT_EOF
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -4459,7 +4731,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -4510,12 +4782,12 @@ _LT_EOF
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -4529,8 +4801,8 @@ _LT_EOF
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+@@ -4548,8 +4820,8 @@ _LT_EOF
--macro_version='2.2.7a'
--macro_revision='1.3134'
-+macro_version='2.4'
-+macro_revision='1.3293'
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4595,8 +4867,8 @@ _LT_EOF
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+@@ -4726,7 +4998,7 @@ _LT_EOF
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+@@ -4737,7 +5009,7 @@ _LT_EOF
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+@@ -4781,20 +5053,63 @@ _LT_EOF
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+- # FIXME: Should let the user specify the lib program.
+- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++ esac
+ ;;
+ darwin* | rhapsody*)
+@@ -4828,7 +5143,7 @@ _LT_EOF
-@@ -5176,7 +5182,7 @@
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
- $as_echo_n "checking how to print strings... " >&6; }
- # Test print first, because it will be a builtin if present.
--if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
- elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -5862,8 +5868,8 @@
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-- = c,a/b,, \
-+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-+ = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-@@ -5912,6 +5918,80 @@
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+@@ -4836,7 +5151,7 @@ _LT_EOF
+ hpux9*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -4852,7 +5167,7 @@ _LT_EOF
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -4876,10 +5191,10 @@ _LT_EOF
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+@@ -4926,16 +5241,31 @@ _LT_EOF
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-+if test "${lt_cv_to_host_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-+ ;;
-+ esac
-+ ;;
-+ *-*-cygwin* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-+ ;;
-+ esac
-+ ;;
-+ * ) # unhandled hosts (and "normal" native builds)
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+esac
-+
-+fi
-+
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-+if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ #assume ordinary cross tools, or native build.
-+lt_cv_to_tool_file_cmd=func_convert_file_noop
-+case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+fi
-+
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
-+
-+
-+
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
- $as_echo_n "checking for $LD option to reload object files... " >&6; }
- if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -5928,6 +6008,11 @@
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ if test "$GCC" != yes; then
-+ reload_cmds=false
-+ fi
-+ ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6096,7 +6181,8 @@
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
-- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ # Keep this pattern in sync with the one in func_win32_libid.
-+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- AC_LINK_IFELSE(int foo(void) {},
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+- )
+- LDFLAGS="$save_LDFLAGS"
++ # This should be the same for all languages, so no per-tag cache variable.
++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++ [lt_cv_irix_exported_symbol],
++ [save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(
++ [AC_LANG_SOURCE(
++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++ [C++], [[int foo (void) { return 0; }]],
++ [Fortran 77], [[
++ subroutine foo
++ end]],
++ [Fortran], [[
++ subroutine foo
++ end]])])],
++ [lt_cv_irix_exported_symbol=yes],
++ [lt_cv_irix_exported_symbol=no])
++ LDFLAGS="$save_LDFLAGS"])
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -5020,7 +5350,7 @@ _LT_EOF
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+@@ -5039,9 +5369,9 @@ _LT_EOF
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -5313,8 +5643,6 @@ _LT_TAGDECL([], [inherit_rpath], [0],
+ to runtime path list])
+ _LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+-_LT_TAGDECL([], [fix_srcfile_path], [1],
+- [Fix the shell variable $srcfile for the compiler])
+ _LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+ _LT_TAGDECL([], [export_symbols_cmds], [2],
+@@ -5325,6 +5653,8 @@ _LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+ _LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++ [Commands necessary for finishing linking programs])
+ _LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+ dnl FIXME: Not yet implemented
+@@ -5426,6 +5756,7 @@ CC="$lt_save_CC"
+ m4_defun([_LT_LANG_CXX_CONFIG],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+ m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+@@ -5487,6 +5818,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+@@ -5504,6 +5836,7 @@ if test "$_lt_caught_CXX_error" != yes; then
fi
- ;;
-@@ -6250,6 +6336,21 @@
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
- $as_echo "$lt_cv_deplibs_check_method" >&6; }
-+
-+file_magic_glob=
-+want_nocaseglob=no
-+if test "$build" = "$host"; then
-+ case $host_os in
-+ mingw* | pw32*)
-+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-+ want_nocaseglob=yes
-+ else
-+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
-+ fi
-+ ;;
-+ esac
-+fi
-+
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6265,9 +6366,162 @@
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -5525,8 +5858,8 @@ if test "$_lt_caught_CXX_error" != yes; then
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+@@ -5667,7 +6000,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -5679,7 +6012,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- _LT_SYS_MODULE_PATH_AIX
++ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+@@ -5721,29 +6054,75 @@ if test "$_lt_caught_CXX_error" != yes; then
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+- # as there is no search path for DLLs.
+- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+- _LT_TAGVAR(always_export_symbols, $1)=no
+- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+-
+- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- # If the export-symbols file already is a .def file (1st line
+- # is EXPORTS), use it as is; otherwise, prepend...
+- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname.def;
+- else
+- echo EXPORTS > $output_objdir/$soname.def;
+- cat $export_symbols >> $output_objdir/$soname.def;
+- fi~
+- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+- else
+- _LT_TAGVAR(ld_shlibs, $1)=no
+- fi
+- ;;
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+@@ -5818,7 +6197,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+ ;;
+ *)
+ if test "$GXX" = yes; then
+- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+@@ -5889,10 +6268,10 @@ if test "$_lt_caught_CXX_error" != yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+@@ -5933,9 +6312,9 @@ if test "$_lt_caught_CXX_error" != yes; then
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+@@ -6005,20 +6384,20 @@ if test "$_lt_caught_CXX_error" != yes; then
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+@@ -6213,7 +6592,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+@@ -6259,7 +6638,7 @@ if test "$_lt_caught_CXX_error" != yes; then
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$DLLTOOL"; then
-+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DLLTOOL=$ac_cv_prog_DLLTOOL
-+if test -n "$DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-+$as_echo "$DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DLLTOOL"; then
-+ ac_ct_DLLTOOL=$DLLTOOL
-+ # Extract the first word of "dlltool", so it can be a program name with args.
-+set dummy dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_DLLTOOL"; then
-+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-+if test -n "$ac_ct_DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-+$as_echo "$ac_ct_DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_DLLTOOL" = x; then
-+ DLLTOOL="false"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DLLTOOL=$ac_ct_DLLTOOL
-+ fi
-+else
-+ DLLTOOL="$ac_cv_prog_DLLTOOL"
-+fi
-+
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-+if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_sharedlib_from_linklib_cmd='unknown'
-+
-+case $host_os in
-+cygwin* | mingw* | pw32* | cegcc*)
-+ # two different shell functions defined in ltmain.sh
-+ # decide which to use based on capabilities of $DLLTOOL
-+ case `$DLLTOOL --help 2>&1` in
-+ *--identify-strict*)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-+ ;;
-+ *)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-+ ;;
-+ esac
-+ ;;
-+*)
-+ # fallback: assume linklib IS sharedlib
-+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-+ ;;
-+esac
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-+
-+
-+
-+
-+
-+
-+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
-+ for ac_prog in ar
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6283,7 +6537,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6303,11 +6557,15 @@
- fi
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+@@ -6300,9 +6679,9 @@ if test "$_lt_caught_CXX_error" != yes; then
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+@@ -6431,6 +6810,7 @@ if test "$_lt_caught_CXX_error" != yes; then
+ fi # test -n "$compiler"
-+ test -n "$AR" && break
-+ done
- fi
--if test -z "$ac_cv_prog_AR"; then
-+if test -z "$AR"; then
- ac_ct_AR=$AR
-- # Extract the first word of "ar", so it can be a program name with args.
--set dummy ar; ac_word=$2
-+ for ac_prog in ar
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6323,7 +6581,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_ac_ct_AR="ar"
-+ ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6342,6 +6600,10 @@
- $as_echo "no" >&6; }
- fi
+ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+@@ -6445,6 +6825,29 @@ AC_LANG_POP
+ ])# _LT_LANG_CXX_CONFIG
-+
-+ test -n "$ac_ct_AR" && break
-+done
-+
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
-@@ -6353,16 +6615,72 @@
- esac
- AR=$ac_ct_AR
- fi
--else
-- AR="$ac_cv_prog_AR"
- fi
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
-+: ${AR=ar}
-+: ${AR_FLAGS=cru}
-+
-+
-+
-+
-+
-+
-+
-+
-+
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
+
+ # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+ # ---------------------------------
+ # Figure out "hidden" library dependencies from verbose
+@@ -6453,6 +6856,7 @@ AC_LANG_POP
+ # objects, libraries and library flags.
+ m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+ [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+ # Dependencies to place before and after the object being linked:
+ _LT_TAGVAR(predep_objects, $1)=
+ _LT_TAGVAR(postdep_objects, $1)=
+@@ -6503,6 +6907,13 @@ public class foo {
+ };
+ _LT_EOF
+ ])
+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-+$as_echo_n "checking for archiver @FILE support... " >&6; }
-+if test "${lt_cv_ar_at_file+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_ar_at_file=no
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++esac
+
-+int
-+main ()
-+{
+ dnl Parse the compiler output and extract the necessary
+ dnl objects, libraries and library flags.
+ if AC_TRY_EVAL(ac_compile); then
+@@ -6514,7 +6925,7 @@ if AC_TRY_EVAL(ac_compile); then
+ pre_test_object_deps_done=no
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ echo conftest.$ac_objext > conftest.lst
-+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -eq 0; then
-+ # Ensure the archiver fails upon bogus file names.
-+ rm -f conftest.$ac_objext libconftest.a
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -ne 0; then
-+ lt_cv_ar_at_file=@
-+ fi
-+ fi
-+ rm -f conftest.* libconftest.a
+ for p in `eval "$output_verbose_link_cmd"`; do
+- case $p in
++ case ${prev}${p} in
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+@@ -6523,13 +6934,22 @@ if AC_TRY_EVAL(ac_compile); then
+ test $p = "-R"; then
+ prev=$p
+ continue
+- else
+- prev=
+ fi
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-+$as_echo "$lt_cv_ar_at_file" >&6; }
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
+ if test "$pre_test_object_deps_done" = no; then
+- case $p in
+- -L* | -R*)
++ case ${prev} in
++ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+@@ -6549,8 +6969,10 @@ if AC_TRY_EVAL(ac_compile); then
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
++ prev=
+ ;;
-+if test "x$lt_cv_ar_at_file" = xno; then
-+ archiver_list_spec=
-+else
-+ archiver_list_spec=$lt_cv_ar_at_file
-+fi
++ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+@@ -6586,6 +7008,7 @@ else
+ fi
+
+ $RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
+ # PORTME: override above test on systems where it is broken
+ m4_if([$1], [CXX],
+@@ -6622,7 +7045,7 @@ linux*)
+ solaris*)
+ case $cc_basename in
+- CC*)
++ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+@@ -6735,7 +7158,9 @@ if test "$_lt_disable_F77" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
++ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -6789,6 +7214,7 @@ if test "$_lt_disable_F77" != yes; then
-@@ -6704,8 +7022,8 @@
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
++ CFLAGS="$lt_save_CFLAGS"
+ fi # test "$_lt_disable_F77" != yes
- # Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
--lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+ AC_LANG_POP
+@@ -6865,7 +7291,9 @@ if test "$_lt_disable_FC" != yes; then
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
++ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
- # Handle CRLF in mingw tool chain
- opt_cr=
-@@ -6741,6 +7059,7 @@
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
-+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+@@ -6921,7 +7349,8 @@ if test "$_lt_disable_FC" != yes; then
+ fi # test -n "$compiler"
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -6782,6 +7101,18 @@
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT_DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT_DLSYM_CONST
-+#else
-+# define LT_DLSYM_CONST const
-+#endif
-+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -6793,7 +7124,7 @@
- cat <<_LT_EOF >> conftest.$ac_ext
+ GCC=$lt_save_GCC
+- CC="$lt_save_CC"
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
+ fi # test "$_lt_disable_FC" != yes
- /* The mapping between symbol names and symbols. */
--const struct {
-+LT_DLSYM_CONST struct {
- const char *name;
- void *address;
- }
-@@ -6819,8 +7150,8 @@
- _LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-+ lt_globsym_save_LIBS=$LIBS
-+ lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -6830,8 +7161,8 @@
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-+ LIBS=$lt_globsym_save_LIBS
-+ CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
-@@ -6868,6 +7199,19 @@
- $as_echo "ok" >&6; }
- fi
+ AC_LANG_POP
+@@ -6958,10 +7387,12 @@ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
-+# Response file support.
-+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-+ nm_file_list_spec='@'
-+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
-+ nm_file_list_spec='@'
-+fi
-+
-+
-+
-+
-+
-+
-+
+ # Allow CC to be a program name with arguments.
+-lt_save_CC="$CC"
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=yes
+ CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_TAGVAR(LD, $1)="$LD"
+@@ -6992,7 +7423,8 @@ fi
+ AC_LANG_RESTORE
+
+ GCC=$lt_save_GCC
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_GCJ_CONFIG
+@@ -7027,9 +7459,11 @@ _LT_LINKER_BOILERPLATE
-@@ -6888,6 +7232,42 @@
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
+ lt_save_GCC=$GCC
+ GCC=
+ CC=${RC-"windres"}
++CFLAGS=
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+@@ -7042,7 +7476,8 @@ fi
+ GCC=$lt_save_GCC
+ AC_LANG_RESTORE
+-CC="$lt_save_CC"
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
+ ])# _LT_LANG_RC_CONFIG
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-+$as_echo_n "checking for sysroot... " >&6; }
-+
-+# Check whether --with-libtool-sysroot was given.
-+if test "${with_libtool_sysroot+set}" = set; then :
-+ withval=$with_libtool_sysroot;
-+else
-+ with_libtool_sysroot=no
-+fi
-+
-+
-+lt_sysroot=
-+case ${with_libtool_sysroot} in #(
-+ yes)
-+ if test "$GCC" = yes; then
-+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-+ fi
-+ ;; #(
-+ /*)
-+ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
-+ ;; #(
-+ no|'')
-+ ;; #(
-+ *)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
-+$as_echo "${with_libtool_sysroot}" >&6; }
-+ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
-+ ;;
-+esac
-+
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-+$as_echo "${lt_sysroot:-no}" >&6; }
-+
-+
-+
-+
+@@ -7101,6 +7536,15 @@ _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+ AC_SUBST([OBJDUMP])
+ ])
- # Check whether --enable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then :
-@@ -7095,6 +7475,123 @@
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
- need_locks="$enable_libtool_lock"
+ # _LT_DECL_SED
+ # ------------
+@@ -7194,8 +7638,8 @@ m4_defun([_LT_CHECK_SHELL_FEATURES],
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -7234,206 +7678,162 @@ _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+ ])# _LT_CHECK_SHELL_FEATURES
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$MANIFEST_TOOL"; then
-+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-+if test -n "$MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-+$as_echo "$MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
-+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
-+ # Extract the first word of "mt", so it can be a program name with args.
-+set dummy mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-+if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
-+ MANIFEST_TOOL=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
-+ fi
-+else
-+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
-+fi
-+
-+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-+if test "${lt_cv_path_mainfest_tool+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_path_mainfest_tool=no
-+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
-+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-+ cat conftest.err >&5
-+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-+ lt_cv_path_mainfest_tool=yes
-+ fi
-+ rm -f conftest*
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-+if test "x$lt_cv_path_mainfest_tool" != xyes; then
-+ MANIFEST_TOOL=:
-+fi
-+
-+
-+
+
+-# _LT_PROG_XSI_SHELLFNS
+-# ---------------------
+-# Bourne and XSI compatible variants of some useful shell functions.
+-m4_defun([_LT_PROG_XSI_SHELLFNS],
+-[case $xsi_shell in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
+-
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+-}
+-
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_dirname_and_basename file append nondir_replacement
+-# perform func_basename and func_dirname in a single function
+-# call:
+-# dirname: Compute the dirname of FILE. If nonempty,
+-# add APPEND to the result, otherwise set result
+-# to NONDIR_REPLACEMENT.
+-# value returned in "$func_dirname_result"
+-# basename: Compute filename of FILE.
+-# value retuned in "$func_basename_result"
+-# Implementation must be kept synchronized with func_dirname
+-# and func_basename. For efficiency, we do not delegate to
+-# those functions but instead duplicate the functionality here.
+-func_dirname_and_basename ()
+-{
+- case ${1} in
+- */*) func_dirname_result="${1%/*}${2}" ;;
+- * ) func_dirname_result="${3}" ;;
+- esac
+- func_basename_result="${1##*/}"
+-}
+-
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-func_stripname ()
+-{
+- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+- # positional parameters, so assign one to ordinary parameter first.
+- func_stripname_result=${3}
+- func_stripname_result=${func_stripname_result#"${1}"}
+- func_stripname_result=${func_stripname_result%"${2}"}
+-}
+-
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=${1%%=*}
+- func_opt_split_arg=${1#*=}
+-}
+-
+-# func_lo2o object
+-func_lo2o ()
+-{
+- case ${1} in
+- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+- *) func_lo2o_result=${1} ;;
+- esac
+-}
+-
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=${1%.*}.lo
+-}
+-
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=$(( $[*] ))
+-}
+-
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=${#1}
+-}
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
+
+-_LT_EOF
+- ;;
+- *) # Bourne compatible functions.
+- cat << \_LT_EOF >> "$cfgfile"
+
+-# func_dirname file append nondir_replacement
+-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+-# otherwise set result to NONDIR_REPLACEMENT.
+-func_dirname ()
+-{
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+-}
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac])
+
++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++ func_basename_result="${1##*/}"])
+
++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"])
- case $host_os in
- rhapsody* | darwin*)
-@@ -7658,6 +8155,8 @@
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
-+ echo "$RANLIB libconftest.a" >&5
-+ $RANLIB libconftest.a 2>&5
- cat > conftest.c << _LT_EOF
- int main() { return 0;}
- _LT_EOF
-@@ -7853,7 +8352,8 @@
- LIBTOOL_DEPS="$ltmain"
+-# func_basename file
+-func_basename ()
+-{
+- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}])
- # Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+LIBTOOL='$(SHELL) $(top_builddir)'
-+LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+-dnl func_dirname_and_basename
+-dnl A portable version of this function is already defined in general.m4sh
+-dnl so there is no need for it here.
++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++ func_split_long_opt_name=${1%%=*}
++ func_split_long_opt_arg=${1#*=}])
+
+-# func_stripname prefix suffix name
+-# strip PREFIX and SUFFIX off of NAME.
+-# PREFIX and SUFFIX must not contain globbing or regex special
+-# characters, hashes, percent signs, but SUFFIX may contain a leading
+-# dot (in which case that matches only a dot).
+-# func_strip_suffix prefix name
+-func_stripname ()
+-{
+- case ${2} in
+- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+- esac
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++ func_split_short_opt_arg=${1#??}
++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+-# sed scripts:
+-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+-my_sed_long_arg='1s/^-[[^=]]*=//'
++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac])
+-# func_opt_split
+-func_opt_split ()
+-{
+- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
+- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-@@ -7942,7 +8442,7 @@
- esac
+-# func_lo2o object
+-func_lo2o ()
+-{
+- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
+-# func_xform libobj-or-source
+-func_xform ()
+-{
+- func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
++fi
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8240,8 +8740,6 @@
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
+-# func_arith arithmetic-term...
+-func_arith ()
+-{
+- func_arith_result=`expr "$[@]"`
+-}
++if test x"$lt_shell_append" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
--$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+-# func_len string
+-# STRING may not start with a hyphen.
+-func_len ()
+-{
+- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+-}
++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++ func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
-@@ -8407,6 +8905,12 @@
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ lt_prog_compiler_wl='-Wl,-Wl,,'
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -8469,7 +8973,7 @@
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
-@@ -8526,13 +9030,17 @@
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+-_LT_EOF
+-esac
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
+
+-case $lt_shell_append in
+- yes)
+- cat << \_LT_EOF >> "$cfgfile"
++if test x"$_lt_function_replace_fail" = x":"; then
++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
+
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]+=\$[2]"
+-}
+-_LT_EOF
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
;;
- esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
--$as_echo "$lt_prog_compiler_pic" >&6; }
--
--
+- *)
+- cat << \_LT_EOF >> "$cfgfile"
-
+-# func_append var value
+-# Append VALUE to the end of shell variable VAR.
+-func_append ()
+-{
+- eval "$[1]=\$$[1]\$[2]"
+-}
-
+-_LT_EOF
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
+ ;;
+- esac
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++ [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
+ ])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++ [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+diff --git a/ltmain.sh b/ltmain.sh
+index 9503ec8..70e856e 100644
+--- a/ltmain.sh
++++ b/ltmain.sh
+@@ -1,10 +1,9 @@
+-# Generated from ltmain.m4sh.
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
-
- #
- # Check to make sure the PIC flag actually works.
-@@ -8593,6 +9101,11 @@
-
+-# libtool (GNU libtool 1.3134 2009-11-29) 2.2.7a
++# libtool (GNU libtool) 2.4
+ # Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+-# 2007, 2008, 2009 Free Software Foundation, Inc.
++# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ # This is free software; see the source for copying conditions. There is NO
+ # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+
-+
-+
-+
-+
- #
- # Check to make sure the static flag actually works.
+@@ -38,7 +37,6 @@
+ # -n, --dry-run display commands without modifying any files
+ # --features display basic configuration information and exit
+ # --mode=MODE use operation mode MODE
+-# --no-finish let install mode avoid finish commands
+ # --preserve-dup-deps don't remove duplicate dependency libraries
+ # --quiet, --silent don't print informational messages
+ # --no-quiet, --no-silent
+@@ -71,17 +69,19 @@
+ # compiler: $LTCC
+ # compiler flags: $LTCFLAGS
+ # linker: $LD (gnu? $with_gnu_ld)
+-# $progname: (GNU libtool 1.3134 2009-11-29) 2.2.7a
++# $progname: (GNU libtool) 2.4
+ # automake: $automake_version
+ # autoconf: $autoconf_version
#
-@@ -8943,7 +9456,8 @@
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
-- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ # Report bugs to <bug-libtool at gnu.org>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -8991,7 +9505,7 @@
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -9042,12 +9556,12 @@
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
-- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
-@@ -9061,8 +9575,8 @@
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
+ PROGRAM=libtool
+ PACKAGE=libtool
+-VERSION=2.2.7a
+-TIMESTAMP=" 1.3134 2009-11-29"
+-package_revision=1.3134
++VERSION=2.4
++TIMESTAMP=""
++package_revision=1.3293
-@@ -9080,8 +9594,8 @@
+ # Be Bourne compatible
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+@@ -106,9 +106,6 @@ _LTECHO_EOF'
+ }
- _LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9127,8 +9641,8 @@
+ # NLS nuisances: We save the old values to restore during execute mode.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+ lt_user_locale=
+ lt_safe_locale=
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+@@ -121,15 +118,13 @@ do
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+ done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9258,7 +9772,13 @@
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+ $lt_unset CDPATH
- int
-@@ -9271,22 +9791,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
-+
-+fi
-+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+-
+-
+-
+-
+-
+ # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+ # is ksh but when the shell is invoked as "sh" and the current value of
+ # the _XPG environment variable is not equal to 1 (one), the special
+@@ -140,7 +135,7 @@ progpath="$0"
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9298,7 +9825,13 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
- int
-@@ -9311,22 +9844,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+ : ${CP="cp -f"}
+-: ${ECHO=$as_echo}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+ : ${EGREP="/bin/grep -E"}
+ : ${FGREP="/bin/grep -F"}
+ : ${GREP="/bin/grep"}
+@@ -149,7 +144,7 @@ progpath="$0"
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+-: ${SED="/mount/endor/wildenhu/local-x86_64/bin/sed"}
++: ${SED="/bin/sed"}
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
+@@ -169,6 +164,27 @@ IFS=" $lt_nl"
+ dirname="s,/[^/]*$,,"
+ basename="s,^.*/,,"
+
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE. If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++ if test "X$func_dirname_result" = "X${1}"; then
++ func_dirname_result="${3}"
++ else
++ func_dirname_result="$func_dirname_result${2}"
++ fi
++} # func_dirname may be replaced by extended shell implementation
+
-+fi
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
++# func_basename file
++func_basename ()
++{
++ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
+ # func_dirname_and_basename file append nondir_replacement
+ # perform func_basename and func_dirname in a single function
+ # call:
+@@ -183,17 +199,31 @@ basename="s,^.*/,,"
+ # those functions but instead duplicate the functionality here.
+ func_dirname_and_basename ()
+ {
+- # Extract subdirectory from the argument.
+- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+- if test "X$func_dirname_result" = "X${1}"; then
+- func_dirname_result="${3}"
+- else
+- func_dirname_result="$func_dirname_result${2}"
+- fi
+- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+-}
++ # Extract subdirectory from the argument.
++ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++ if test "X$func_dirname_result" = "X${1}"; then
++ func_dirname_result="${3}"
++ else
++ func_dirname_result="$func_dirname_result${2}"
++ fi
++ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
++
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname may be replaced by extended shell implementation
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -9371,20 +9911,63 @@
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
-- hardcode_libdir_flag_spec=' '
-- allow_undefined_flag=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- old_archive_from_new_cmds='true'
-- # FIXME: Should let the user specify the lib program.
-- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- enable_shared_with_static_runtimes=yes
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ file_list_spec='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ old_postinstall_cmds='chmod 644 $oldlib'
-+ postlink_cmds='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_from_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+ esac
- ;;
+-# Generated shell functions inserted here.
- darwin* | rhapsody*)
-@@ -9445,7 +10028,7 @@
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ pathcar='s,^/\([^/]*\).*$,\1,'
+@@ -376,6 +406,15 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+ # Same as above, but do not quote variable references.
+ double_quote_subst='s/\(["`\\]\)/\\\1/g'
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-@@ -9453,7 +10036,7 @@
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes. A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
+ # Re-`\' parameter expansions in output of double_quote_subst that were
+ # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+ # in input to double_quote_subst, that '$' was protected from expansion.
+@@ -404,7 +443,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+- $ECHO "$progname${mode+: }$mode: $*"
++ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+ }
- hpux9*)
- if test "$GCC" = yes; then
-- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
-@@ -9469,7 +10052,7 @@
+ # func_verbose arg...
+@@ -430,14 +469,14 @@ func_echo_all ()
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
++ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
++ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
-@@ -9493,10 +10076,10 @@
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
-@@ -9575,23 +10158,36 @@
+ # bash bug again:
+ :
+@@ -656,19 +695,35 @@ func_show_eval_locale ()
+ fi
+ }
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-+if test "${lt_cv_irix_exported_symbol+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
--int foo(void) {}
-+int foo (void) { return 0; }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
-+ lt_cv_irix_exported_symbol=yes
-+else
-+ lt_cv_irix_exported_symbol=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-- LDFLAGS="$save_LDFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-+ fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -9676,7 +10272,7 @@
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
-@@ -9695,9 +10291,9 @@
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -10273,8 +10869,9 @@
- need_version=no
- need_lib_prefix=no
-
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -10307,13 +10904,71 @@
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
+-
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result. All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++ case $1 in
++ [0-9]* | *[!a-zA-Z0-9_]*)
++ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
++ ;;
++ * )
++ func_tr_sh_result=$1
+ ;;
++ esac
++}
+
+
+ # func_version
+ # Echo version message to standard output and exit.
+ func_version ()
+ {
++ $opt_debug
+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+- s/\n# //
++ s/\n# / /
+ b more
+ }
+ :go
+@@ -685,7 +740,9 @@ func_version ()
+ # Echo short help message to standard output and exit.
+ func_usage ()
+ {
+- $SED -n '/^# Usage:/,/^# *-h/ {
++ $opt_debug
+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
++ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+@@ -701,7 +758,10 @@ func_usage ()
+ # unless 'noexit' is passed as argument.
+ func_help ()
+ {
++ $opt_debug
+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
++ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+@@ -714,7 +774,11 @@ func_help ()
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+- }' < "$progpath"
++ d
++ }
++ /^# .* home page:/b print
++ /^# General help using/b print
++ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+@@ -726,12 +790,39 @@ func_help ()
+ # exit_cmd.
+ func_missing_arg ()
+ {
+- func_error "missing argument for $1"
++ $opt_debug
++
++ func_error "missing argument for $1."
+ exit_cmd=exit
+ }
+
+-exit_cmd=:
+
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
++
++ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
++
++
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++ my_sed_long_arg='1s/^--[^=]*=//'
++
++ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
++
++exit_cmd=:
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -10405,7 +11060,7 @@
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-@@ -11245,10 +11900,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11351,10 +12006,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
+@@ -741,26 +832,64 @@ magic="%%%MAGIC variable%%%"
+ magic_exe="%%%MAGIC EXE variable%%%"
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -15064,13 +15719,20 @@
- lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
- lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
- lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
- reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
- reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
- OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
- deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
- file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
- AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
- AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
- STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
- RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
- old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -15085,14 +15747,17 @@
- lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
- objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
- MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
--lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
- lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
- need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
- DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
- NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
- LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -15125,12 +15790,12 @@
- hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
- inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
- link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
--fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
- always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
- export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
- exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
- include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
- prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
- file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
- variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
- need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -15185,8 +15850,13 @@
- OBJDUMP \
- deplibs_check_method \
- file_magic_cmd \
-+file_magic_glob \
-+want_nocaseglob \
-+DLLTOOL \
-+sharedlib_from_linklib_cmd \
- AR \
- AR_FLAGS \
-+archiver_list_spec \
- STRIP \
- RANLIB \
- CC \
-@@ -15196,12 +15866,14 @@
- lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-+nm_file_list_spec \
- lt_prog_compiler_no_builtin_flag \
--lt_prog_compiler_wl \
- lt_prog_compiler_pic \
-+lt_prog_compiler_wl \
- lt_prog_compiler_static \
- lt_cv_prog_compiler_c_o \
- need_locks \
-+MANIFEST_TOOL \
- DSYMUTIL \
- NMEDIT \
- LIPO \
-@@ -15217,7 +15889,6 @@
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
--fix_srcfile_path \
- exclude_expsyms \
- include_expsyms \
- file_list_spec \
-@@ -15253,6 +15924,7 @@
- module_expsym_cmds \
- export_symbols_cmds \
- prelink_cmds \
-+postlink_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- finish_cmds \
-@@ -16017,7 +16689,8 @@
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
- #
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is part of GNU Libtool.
-@@ -16120,19 +16793,42 @@
- # turn newlines into spaces.
- NL2SP=$lt_lt_NL2SP
+ # Global variables.
+-# $mode is unset
+ nonopt=
+-execute_dlfiles=
+ preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+ extracted_archives=
+ extracted_serial=0
-+# convert \$build file names to \$host format.
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
+-opt_dry_run=false
+-opt_finish=:
+-opt_duplicate_deps=false
+-opt_silent=false
+-opt_debug=:
+-
+ # If this variable is set in any of the actions, the command in it
+ # will be execed at the end. This prevents here-documents from being
+ # left over by shells.
+ exec_cmd=
+
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++ eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
+
-+# convert \$build files to toolchain format.
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++ func_quote_for_eval "${2}"
++ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
+
- # An object symbol dumper.
- OBJDUMP=$lt_OBJDUMP
-
- # Method to check whether dependent libraries are shared objects.
- deplibs_check_method=$lt_deplibs_check_method
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++ func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
+ # func_fatal_configuration arg...
+ # Echo program name prefixed message to standard error, followed by
+ # a configuration failure hint, and exit.
+@@ -850,130 +979,204 @@ func_enable_tag ()
+ esac
+ }
--# Command to use when deplibs_check_method == "file_magic".
-+# Command to use when deplibs_check_method = "file_magic".
- file_magic_cmd=$lt_file_magic_cmd
+-# Parse options once, thoroughly. This comes as soon as possible in
+-# the script to make things like `libtool --version' happen quickly.
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
+ {
++ if test "$package_revision" != "$macro_revision"; then
++ if test "$VERSION" != "$macro_version"; then
++ if test -z "$macro_version"; then
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++ else
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++ fi
++ else
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++ fi
-+# How to find potential files when deplibs_check_method = "file_magic".
-+file_magic_glob=$lt_file_magic_glob
-+
-+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-+want_nocaseglob=$lt_want_nocaseglob
-+
-+# DLL creation program.
-+DLLTOOL=$lt_DLLTOOL
-+
-+# Command to associate shared and link libraries.
-+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
-+
- # The archiver.
- AR=$lt_AR
+- # Shorthand for --mode=foo, only valid as the first argument
+- case $1 in
+- clean|clea|cle|cl)
+- shift; set dummy --mode clean ${1+"$@"}; shift
+- ;;
+- compile|compil|compi|comp|com|co|c)
+- shift; set dummy --mode compile ${1+"$@"}; shift
+- ;;
+- execute|execut|execu|exec|exe|ex|e)
+- shift; set dummy --mode execute ${1+"$@"}; shift
+- ;;
+- finish|finis|fini|fin|fi|f)
+- shift; set dummy --mode finish ${1+"$@"}; shift
+- ;;
+- install|instal|insta|inst|ins|in|i)
+- shift; set dummy --mode install ${1+"$@"}; shift
+- ;;
+- link|lin|li|l)
+- shift; set dummy --mode link ${1+"$@"}; shift
+- ;;
+- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+- shift; set dummy --mode uninstall ${1+"$@"}; shift
+- ;;
+- esac
++ exit $EXIT_MISMATCH
++ fi
++}
+
-+# Flags to create an archive.
- AR_FLAGS=$lt_AR_FLAGS
-
-+# How to feed a file listing to the archiver.
-+archiver_list_spec=$lt_archiver_list_spec
+
- # A symbol stripping program.
- STRIP=$lt_STRIP
-
-@@ -16162,6 +16858,12 @@
- # Transform the output of nm in a C name address pair when lib prefix is needed.
- global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++ shift; set dummy --mode clean ${1+"$@"}; shift
++ ;;
++compile|compil|compi|comp|com|co|c)
++ shift; set dummy --mode compile ${1+"$@"}; shift
++ ;;
++execute|execut|execu|exec|exe|ex|e)
++ shift; set dummy --mode execute ${1+"$@"}; shift
++ ;;
++finish|finis|fini|fin|fi|f)
++ shift; set dummy --mode finish ${1+"$@"}; shift
++ ;;
++install|instal|insta|inst|ins|in|i)
++ shift; set dummy --mode install ${1+"$@"}; shift
++ ;;
++link|lin|li|l)
++ shift; set dummy --mode link ${1+"$@"}; shift
++ ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++ shift; set dummy --mode uninstall ${1+"$@"}; shift
++ ;;
++esac
-+# Specify filename containing input files for \$NM.
-+nm_file_list_spec=$lt_nm_file_list_spec
-+
-+# The root where to search for dependent libraries,and in which our libraries should be installed.
-+lt_sysroot=$lt_sysroot
+- # Parse non-mode specific arguments:
+- while test "$#" -gt 0; do
+
- # The name of the directory that contains temporary libtool files.
- objdir=$objdir
-
-@@ -16171,6 +16873,9 @@
- # Must we lock files when doing compilation?
- need_locks=$lt_need_locks
-
-+# Manifest tool.
-+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
- # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
- DSYMUTIL=$lt_DSYMUTIL
-
-@@ -16285,12 +16990,12 @@
- # Compiler flag to turn off builtin functions.
- no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
--# How to pass a linker flag through the compiler.
--wl=$lt_lt_prog_compiler_wl
--
- # Additional compiler flags for building library objects.
- pic_flag=$lt_lt_prog_compiler_pic
-
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
+
- # Compiler flag to prevent dynamic linking.
- link_static_flag=$lt_lt_prog_compiler_static
-
-@@ -16377,9 +17082,6 @@
- # Whether libtool must link a program against all its dependency libraries.
- link_all_deplibs=$link_all_deplibs
-
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path=$lt_fix_srcfile_path
--
- # Set to "yes" if exported symbols are required.
- always_export_symbols=$always_export_symbols
-
-@@ -16395,6 +17097,9 @@
- # Commands necessary for linking programs (against libraries) with templates.
- prelink_cmds=$lt_prelink_cmds
-
-+# Commands necessary for finishing linking programs.
-+postlink_cmds=$lt_postlink_cmds
+
- # Specify filename containing input files.
- file_list_spec=$lt_file_list_spec
-
-@@ -16427,210 +17132,169 @@
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
--
-- case $xsi_shell in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result="${1##*/}"
--}
--
--# func_dirname_and_basename file append nondir_replacement
--# perform func_basename and func_dirname in a single function
--# call:
--# dirname: Compute the dirname of FILE. If nonempty,
--# add APPEND to the result, otherwise set result
--# to NONDIR_REPLACEMENT.
--# value returned in "$func_dirname_result"
--# basename: Compute filename of FILE.
--# value retuned in "$func_basename_result"
--# Implementation must be kept synchronized with func_dirname
--# and func_basename. For efficiency, we do not delegate to
--# those functions but instead duplicate the functionality here.
--func_dirname_and_basename ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
-- func_basename_result="${1##*/}"
--}
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--func_stripname ()
--{
-- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-- # positional parameters, so assign one to ordinary parameter first.
-- func_stripname_result=${3}
-- func_stripname_result=${func_stripname_result#"${1}"}
-- func_stripname_result=${func_stripname_result%"${2}"}
--}
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=${1%%=*}
-- func_opt_split_arg=${1#*=}
--}
++# Parse options once, thoroughly. This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++ # this just eases exit handling
++ while test $# -gt 0; do
+ opt="$1"
+ shift
-
--# func_lo2o object
--func_lo2o ()
--{
-- case ${1} in
-- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-- *) func_lo2o_result=${1} ;;
-- esac
--}
+ case $opt in
+- --config) func_config ;;
-
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=${1%.*}.lo
--}
+- --debug) preserve_args="$preserve_args $opt"
++ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+- opt_debug='set -x'
+ $opt_debug
+ ;;
-
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=$(( $* ))
--}
+- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+- execute_dlfiles="$execute_dlfiles $1"
+- shift
++ --dry-run|--dryrun|-n)
++ opt_dry_run=:
+ ;;
-
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=${#1}
--}
+- --dry-run | -n) opt_dry_run=: ;;
+- --features) func_features ;;
+- --finish) mode="finish" ;;
+- --no-finish) opt_finish=false ;;
-
--_LT_EOF
-- ;;
-- *) # Bourne compatible functions.
-- cat << \_LT_EOF >> "$cfgfile"
+- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+- case $1 in
+- # Valid mode arguments:
+- clean) ;;
+- compile) ;;
+- execute) ;;
+- finish) ;;
+- install) ;;
+- link) ;;
+- relink) ;;
+- uninstall) ;;
-
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- # Extract subdirectory from the argument.
-- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-- if test "X$func_dirname_result" = "X${1}"; then
-- func_dirname_result="${3}"
-- else
-- func_dirname_result="$func_dirname_result${2}"
-- fi
--}
+- # Catch anything else as an error
+- *) func_error "invalid argument for $opt"
+- exit_cmd=exit
+- break
+- ;;
+- esac
-
--# func_basename file
--func_basename ()
--{
-- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
--}
+- mode="$1"
++ --config)
++ opt_config=:
++func_config
++ ;;
++ --dlopen|-dlopen)
++ optarg="$1"
++ opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
+ shift
+ ;;
-
+ --preserve-dup-deps)
+- opt_duplicate_deps=: ;;
-
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--# func_strip_suffix prefix name
--func_stripname ()
--{
-- case ${2} in
-- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-- esac
--}
+- --quiet|--silent) preserve_args="$preserve_args $opt"
+- opt_silent=:
+- opt_verbose=false
++ opt_preserve_dup_deps=:
+ ;;
-
--# sed scripts:
--my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
--my_sed_long_arg='1s/^-[^=]*=//'
+- --no-quiet|--no-silent)
+- preserve_args="$preserve_args $opt"
+- opt_silent=false
++ --features)
++ opt_features=:
++func_features
+ ;;
-
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
--}
+- --verbose| -v) preserve_args="$preserve_args $opt"
++ --finish)
++ opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++ ;;
++ --help)
++ opt_help=:
++ ;;
++ --help-all)
++ opt_help_all=:
++opt_help=': help-all'
++ ;;
++ --mode)
++ test $# = 0 && func_missing_arg $opt && break
++ optarg="$1"
++ opt_mode="$optarg"
++case $optarg in
++ # Valid mode arguments:
++ clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++ # Catch anything else as an error
++ *) func_error "invalid argument for $opt"
++ exit_cmd=exit
++ break
++ ;;
++esac
++ shift
++ ;;
++ --no-silent|--no-quiet)
+ opt_silent=false
+- opt_verbose=:
++func_append preserve_args " $opt"
+ ;;
-
--# func_lo2o object
--func_lo2o ()
--{
-- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
--}
+- --no-verbose) preserve_args="$preserve_args $opt"
++ --no-verbose)
+ opt_verbose=false
++func_append preserve_args " $opt"
+ ;;
-
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
--}
+- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+- preserve_args="$preserve_args $opt $1"
+- func_enable_tag "$1" # tagname is set here
++ --silent|--quiet)
++ opt_silent=:
++func_append preserve_args " $opt"
++ opt_verbose=false
++ ;;
++ --verbose|-v)
++ opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++ ;;
++ --tag)
++ test $# = 0 && func_missing_arg $opt && break
++ optarg="$1"
++ opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
+ shift
+ ;;
+
++ -\?|-h) func_usage ;;
++ --help) func_help ;;
++ --version) func_version ;;
++
+ # Separate optargs to long options:
+- -dlopen=*|--mode=*|--tag=*)
+- func_opt_split "$opt"
+- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
++ --*=*)
++ func_split_long_opt "$opt"
++ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+- -\?|-h) func_usage ;;
+- --help) opt_help=: ;;
+- --help-all) opt_help=': help-all' ;;
+- --version) func_version ;;
-
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=`expr "$@"`
--}
+- -*) func_fatal_help "unrecognized option \`$opt'" ;;
-
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+- *) nonopt="$opt"
+- break
++ # Separate non-argument short options:
++ -\?*|-h*|-n*|-v*)
++ func_split_short_opt "$opt"
++ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++ shift
+ ;;
++
++ --) break ;;
++ -*) func_fatal_help "unrecognized option \`$opt'" ;;
++ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
++ # Validate options:
++
++ # save first non-option argument
++ if test "$#" -gt 0; then
++ nonopt="$opt"
++ shift
++ fi
++
++ # preserve --debug
++ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* )
+@@ -981,82 +1184,44 @@ func_enable_tag ()
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
++ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+- # Having warned about all mis-specified options, bail out if
+- # anything was wrong.
+- $exit_cmd $EXIT_FAILURE
-}
--
++ $opt_help || {
++ # Sanity checks first:
++ func_check_version_match
+
+-# func_check_version_match
+-# Ensure that we are using m4 macros, and libtool script from the same
+-# release of libtool.
+-func_check_version_match ()
+-{
+- if test "$package_revision" != "$macro_revision"; then
+- if test "$VERSION" != "$macro_version"; then
+- if test -z "$macro_version"; then
+- cat >&2 <<_LT_EOF
+-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from an older release.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+- else
+- cat >&2 <<_LT_EOF
+-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+-$progname: and run autoconf again.
+-_LT_EOF
+- fi
+- else
+- cat >&2 <<_LT_EOF
+-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
--esac
++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+- exit $EXIT_MISMATCH
+- fi
+-}
-
--case $lt_shell_append in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
++ # Darwin sucks
++ eval std_shrext=\"$shrext_cmds\"
+
+-## ----------- ##
+-## Main. ##
+-## ----------- ##
-
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1+=\$2"
--}
--_LT_EOF
-- ;;
-- *)
-- cat << \_LT_EOF >> "$cfgfile"
+-$opt_help || {
+- # Sanity checks first:
+- func_check_version_match
-
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1=\$$1\$2"
+- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+- func_fatal_configuration "not configured to build any kind of library"
+- fi
++ # Only execute mode is allowed to have -dlopen flags.
++ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++ func_error "unrecognized option \`-dlopen'"
++ $ECHO "$help" 1>&2
++ exit $EXIT_FAILURE
++ fi
+
+- test -z "$mode" && func_fatal_error "error: you must specify a MODE."
++ # Change the help message to a mode-specific one.
++ generic_help="$help"
++ help="Try \`$progname --help --mode=$opt_mode' for more information."
++ }
+
+
+- # Darwin sucks
+- eval "std_shrext=\"$shrext_cmds\""
++ # Bail if the options were screwed
++ $exit_cmd $EXIT_FAILURE
++}
+
+
+- # Only execute mode is allowed to have -dlopen flags.
+- if test -n "$execute_dlfiles" && test "$mode" != execute; then
+- func_error "unrecognized option \`-dlopen'"
+- $ECHO "$help" 1>&2
+- exit $EXIT_FAILURE
+- fi
+
+- # Change the help message to a mode-specific one.
+- generic_help="$help"
+- help="Try \`$progname --help --mode=$mode' for more information."
-}
--
--_LT_EOF
-- ;;
-- esac
-+ sed '$q' "$ltmain" >> "$cfgfile" \
-+ || (rm -f "$cfgfile"; exit 1)
-+ if test x"$xsi_shell" = xyes; then
-+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-+func_dirname ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++## ----------- ##
++## Main. ##
++## ----------- ##
+
+ # func_lalib_p file
+ # True iff FILE is a libtool `.la' library or `.lo' object file.
+@@ -1121,12 +1286,9 @@ func_ltwrapper_executable_p ()
+ # temporary ltwrapper_script.
+ func_ltwrapper_scriptname ()
+ {
+- func_ltwrapper_scriptname_result=""
+- if func_ltwrapper_executable_p "$1"; then
+- func_dirname_and_basename "$1" "" "."
+- func_stripname '' '.exe' "$func_basename_result"
+- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+- fi
++ func_dirname_and_basename "$1" "" "."
++ func_stripname '' '.exe' "$func_basename_result"
++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ }
+
+ # func_ltwrapper_p file
+@@ -1149,7 +1311,7 @@ func_execute_cmds ()
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+- eval "cmd=\"$cmd\""
++ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+@@ -1172,6 +1334,37 @@ func_source ()
+ }
+
+
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot. Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++ func_resolve_sysroot_result=$1
++ case $func_resolve_sysroot_result in
++ =*)
++ func_stripname '=' '' "$func_resolve_sysroot_result"
++ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++ ;;
++ esac
++}
++
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++ case "$lt_sysroot:$1" in
++ ?*:"$lt_sysroot"*)
++ func_stripname "$lt_sysroot" '' "$1"
++ func_replace_sysroot_result="=$func_stripname_result"
++ ;;
++ *)
++ # Including no sysroot.
++ func_replace_sysroot_result=$1
++ ;;
++ esac
++}
++
+ # func_infer_tag arg
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+@@ -1184,8 +1377,7 @@ func_infer_tag ()
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+- func_quote_for_eval "$arg"
+- CC_quoted="$CC_quoted $func_quote_for_eval_result"
++ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+@@ -1204,8 +1396,7 @@ func_infer_tag ()
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+- func_quote_for_eval "$arg"
+- CC_quoted="$CC_quoted $func_quote_for_eval_result"
++ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+@@ -1274,6 +1465,486 @@ EOF
+ }
+ }
+
++
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++ $opt_debug
++ func_convert_core_file_wine_to_w32_result="$1"
++ if test -n "$1"; then
++ # Unfortunately, winepath does not exit with a non-zero error code, so we
++ # are forced to check the contents of stdout. On the other hand, if the
++ # command is not found, the shell will set an exit code of 127 and print
++ # *an error message* to stdout. So we must check for both error code of
++ # zero AND non-empty stdout, which explains the odd construction:
++ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++ $SED -e "$lt_sed_naive_backslashify"`
++ else
++ func_convert_core_file_wine_to_w32_result=
++ fi
++ fi
++}
++# end: func_convert_core_file_wine_to_w32
++
++
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++ $opt_debug
++ # unfortunately, winepath doesn't convert paths, only file names
++ func_convert_core_path_wine_to_w32_result=""
++ if test -n "$1"; then
++ oldIFS=$IFS
++ IFS=:
++ for func_convert_core_path_wine_to_w32_f in $1; do
++ IFS=$oldIFS
++ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++ if test -z "$func_convert_core_path_wine_to_w32_result"; then
++ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++ else
++ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++ fi
++ fi
++ done
++ IFS=$oldIFS
++ fi
++}
++# end: func_convert_core_path_wine_to_w32
++
++
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++ $opt_debug
++ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++ if test "$?" -ne 0; then
++ # on failure, ensure result is empty
++ func_cygpath_result=
++ fi
++ else
++ func_cygpath_result=
++ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++ fi
++}
++#end: func_cygpath
+
+
-+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
-+func_basename ()\
-+{\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format. Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++ $opt_debug
++ # awkward: cmd appends spaces to result
++ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
+
+
-+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-+func_dirname_and_basename ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++ $opt_debug
++ if test -z "$2" && test -n "$1" ; then
++ func_error "Could not determine host file name corresponding to"
++ func_error " \`$1'"
++ func_error "Continuing, but uninstalled executables may not work."
++ # Fallback:
++ func_to_host_file_result="$1"
++ fi
++}
++# end func_convert_file_check
++
++
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++ $opt_debug
++ if test -z "$4" && test -n "$3"; then
++ func_error "Could not determine the host path corresponding to"
++ func_error " \`$3'"
++ func_error "Continuing, but uninstalled executables may not work."
++ # Fallback. This is a deliberately simplistic "conversion" and
++ # should not be "improved". See libtool.info.
++ if test "x$1" != "x$2"; then
++ lt_replace_pathsep_chars="s|$1|$2|g"
++ func_to_host_path_result=`echo "$3" |
++ $SED -e "$lt_replace_pathsep_chars"`
++ else
++ func_to_host_path_result="$3"
++ fi
++ fi
++}
++# end func_convert_path_check
++
++
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++ $opt_debug
++ case $4 in
++ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++ ;;
++ esac
++ case $4 in
++ $2 ) func_append func_to_host_path_result "$3"
++ ;;
++ esac
++}
++# end func_convert_path_front_back_pathsep
++
++
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
++
++
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++ $opt_debug
++ $to_host_file_cmd "$1"
++}
++# end func_to_host_file
++
++
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result. If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++ $opt_debug
++ case ,$2, in
++ *,"$to_tool_file_cmd",*)
++ func_to_tool_file_result=$1
++ ;;
++ *)
++ $to_tool_file_cmd "$1"
++ func_to_tool_file_result=$func_to_host_file_result
++ ;;
++ esac
++}
++# end func_to_tool_file
++
++
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++ func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
++
++
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper. Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_msys_to_w32 "$1"
++ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
++
++
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format. Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++ # LT_CYGPATH in this case.
++ func_to_host_file_result=`cygpath -m "$1"`
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
++
++
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format. Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_file_wine_to_w32 "$1"
++ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
++
++
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_msys_to_w32 "$1"
++ func_cygpath -u "$func_convert_core_msys_to_w32_result"
++ func_to_host_file_result="$func_cygpath_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
++
++
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++ func_convert_core_file_wine_to_w32 "$1"
++ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++ func_to_host_file_result="$func_cygpath_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
++
++
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format. If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++# file name conversion function : func_convert_file_X_to_Y ()
++# path conversion function : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same. If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
+
+
-+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-+func_stripname ()\
-+{\
-+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-+\ # positional parameters, so assign one to ordinary parameter first.\
-+\ func_stripname_result=${3}\
-+\ func_stripname_result=${func_stripname_result#"${1}"}\
-+\ func_stripname_result=${func_stripname_result%"${2}"}\
-+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++ $opt_debug
++ if test -z "$to_host_path_cmd"; then
++ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++ to_host_path_cmd="func_convert_path_${func_stripname_result}"
++ fi
++}
+
+
-+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-+func_split_long_opt ()\
-+{\
-+\ func_split_long_opt_name=${1%%=*}\
-+\ func_split_long_opt_arg=${1#*=}\
-+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++ $opt_debug
++ func_init_to_host_path_cmd
++ $to_host_path_cmd "$1"
++}
++# end func_to_host_path
+
+
-+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-+func_split_short_opt ()\
-+{\
-+\ func_split_short_opt_arg=${1#??}\
-+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++ func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
+
+
-+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-+func_lo2o ()\
-+{\
-+\ case ${1} in\
-+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-+\ *) func_lo2o_result=${1} ;;\
-+\ esac\
-+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper. Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # Remove leading and trailing path separator characters from ARG. MSYS
++ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++ # and winepath ignores them completely.
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_msys_to_w32
+
+
-+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
-+func_xform ()\
-+{\
-+ func_xform_result=${1%.*}.lo\
-+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format. Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_cygwin_to_w32
+
+
-+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
-+func_arith ()\
-+{\
-+ func_arith_result=$(( $* ))\
-+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format. Requires a wine environment and
++# a working winepath. Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_nix_to_w32
+
+
-+ sed -e '/^func_len ()$/,/^} # func_len /c\
-+func_len ()\
-+{\
-+ func_len_result=${#1}\
-+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++ func_to_host_path_result="$func_cygpath_result"
++ func_convert_path_check : : \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++ fi
++}
++# end func_convert_path_msys_to_cygwin
+
-+fi
+
-+if test x"$lt_shell_append" = xyes; then
-+ sed -e '/^func_append ()$/,/^} # func_append /c\
-+func_append ()\
-+{\
-+ eval "${1}+=\\${2}"\
-+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # Remove leading and trailing path separator characters from
++ # ARG. msys behavior is inconsistent here, cygpath turns them
++ # into '.;' and ';.', and winepath ignores them completely.
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++ func_to_host_path_result="$func_cygpath_result"
++ func_convert_path_check : : \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++ fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
+ # func_mode_compile arg...
+ func_mode_compile ()
+ {
+@@ -1314,12 +1985,12 @@ func_mode_compile ()
+ ;;
+
+ -pie | -fpie | -fPIE)
+- pie_flag="$pie_flag $arg"
++ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+- later="$later $arg"
++ func_append later " $arg"
+ continue
+ ;;
+
+@@ -1340,15 +2011,14 @@ func_mode_compile ()
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+- func_quote_for_eval "$arg"
+- lastarg="$lastarg $func_quote_for_eval_result"
++ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+- base_compile="$base_compile $lastarg"
++ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+@@ -1364,8 +2034,7 @@ func_mode_compile ()
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+- func_quote_for_eval "$lastarg"
+- base_compile="$base_compile $func_quote_for_eval_result"
++ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+@@ -1496,17 +2165,16 @@ compiler."
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+- removelist="$removelist $output_obj"
++ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+- removelist="$removelist $lockfile"
++ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+- if test -n "$fix_srcfile_path"; then
+- eval "srcfile=\"$fix_srcfile_path\""
+- fi
++ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+@@ -1526,7 +2194,7 @@ compiler."
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+- command="$command -o $lobj"
++ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+@@ -1573,11 +2241,11 @@ compiler."
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+- command="$command -o $obj"
++ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+- command="$command$suppress_output"
++ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+@@ -1622,13 +2290,13 @@ compiler."
+ }
+
+ $opt_help || {
+- test "$mode" = compile && func_mode_compile ${1+"$@"}
++ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ }
+
+ func_mode_help ()
+ {
+ # We need to display help for each of the modes.
+- case $mode in
++ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+@@ -1659,8 +2327,8 @@ This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+- -prefer-pic try to building PIC objects only
+- -prefer-non-pic try to building non-PIC objects only
++ -prefer-pic try to build PIC objects only
++ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+@@ -1804,7 +2472,7 @@ Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+- func_fatal_help "invalid operation mode \`$mode'"
++ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+@@ -1819,13 +2487,13 @@ if $opt_help; then
+ else
+ {
+ func_help noexit
+- for mode in compile link execute install finish uninstall clean; do
++ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+- for mode in compile link execute install finish uninstall clean; do
++ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+@@ -1854,13 +2522,16 @@ func_mode_execute ()
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+- for file in $execute_dlfiles; do
++ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
++ func_resolve_sysroot "$file"
++ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+@@ -1882,7 +2553,7 @@ func_mode_execute ()
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+- dir="$dir/$objdir"
++ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+@@ -1907,10 +2578,10 @@ func_mode_execute ()
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+- if eval test -z \"\$$shlibpath_var\"; then
+- eval $shlibpath_var=\$dir
++ if eval "test -z \"\$$shlibpath_var\""; then
++ eval "$shlibpath_var=\"\$dir\""
+ else
+- eval $shlibpath_var=\$dir:\$$shlibpath_var
++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+@@ -1939,8 +2610,7 @@ func_mode_execute ()
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+- func_quote_for_eval "$file"
+- args="$args $func_quote_for_eval_result"
++ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+@@ -1972,22 +2642,59 @@ func_mode_execute ()
+ fi
+ }
+
+-test "$mode" = execute && func_mode_execute ${1+"$@"}
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+ # func_mode_finish arg...
+ func_mode_finish ()
+ {
+ $opt_debug
+- libdirs="$nonopt"
++ libs=
++ libdirs=
+ admincmds=
+
+- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+- for dir
+- do
+- libdirs="$libdirs $dir"
+- done
++ for opt in "$nonopt" ${1+"$@"}
++ do
++ if test -d "$opt"; then
++ func_append libdirs " $opt"
+
++ elif test -f "$opt"; then
++ if func_lalib_unsafe_p "$opt"; then
++ func_append libs " $opt"
++ else
++ func_warning "\`$opt' is not a valid libtool archive"
++ fi
+
-+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-+func_append_quoted ()\
-+{\
-+\ func_quote_for_eval "${2}"\
-+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++ else
++ func_fatal_error "invalid argument \`$opt'"
++ fi
++ done
+
++ if test -n "$libs"; then
++ if test -n "$lt_sysroot"; then
++ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++ else
++ sysroot_cmd=
++ fi
+
-+ # Save a `func_append' function call where possible by direct use of '+='
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+else
-+ # Save a `func_append' function call even when '+=' is not available
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+fi
++ # Remove sysroot references
++ if $opt_dry_run; then
++ for lib in $libs; do
++ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++ done
++ else
++ tmpdir=`func_mktempdir`
++ for lib in $libs; do
++ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++ > $tmpdir/tmp-la
++ mv -f $tmpdir/tmp-la $lib
++ done
++ ${RM}r "$tmpdir"
++ fi
++ fi
+
-+if test x"$_lt_function_replace_fail" = x":"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-+fi
-
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
-
-- mv -f "$cfgfile" "$ofile" ||
-+ mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
-Index: binutils-2.24/gprof/configure
-===================================================================
---- binutils-2.24.orig/gprof/configure 2013-12-15 11:09:51.443785606 -0800
-+++ binutils-2.24/gprof/configure 2013-12-15 11:10:23.880452030 -0800
-@@ -629,8 +629,11 @@
- LIPO
- NMEDIT
- DSYMUTIL
-+MANIFEST_TOOL
- RANLIB
-+ac_ct_AR
- AR
-+DLLTOOL
- OBJDUMP
- LN_S
- NM
-@@ -743,6 +746,7 @@
- with_pic
- enable_fast_install
- with_gnu_ld
-+with_libtool_sysroot
- enable_libtool_lock
- enable_nls
- enable_maintainer_mode
-@@ -1397,6 +1401,8 @@
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
-+ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
-+ (or the compiler's sysroot if not specified).
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+@@ -1997,7 +2704,7 @@ func_mode_finish ()
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+- $opt_dry_run || eval "$cmds" || admincmds="$admincmds
++ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+@@ -2006,53 +2713,55 @@ func_mode_finish ()
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
- Some influential environment variables:
- CC C compiler command
-@@ -5065,8 +5071,8 @@
+- echo "----------------------------------------------------------------------"
+- echo "Libraries have been installed in:"
+- for libdir in $libdirs; do
+- $ECHO " $libdir"
+- done
+- echo
+- echo "If you ever happen to want to link against installed libraries"
+- echo "in a given directory, LIBDIR, you must either use libtool, and"
+- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+- echo "flag during linking and do at least one of the following:"
+- if test -n "$shlibpath_var"; then
+- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+- echo " during execution"
+- fi
+- if test -n "$runpath_var"; then
+- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+- echo " during linking"
+- fi
+- if test -n "$hardcode_libdir_flag_spec"; then
+- libdir=LIBDIR
+- eval "flag=\"$hardcode_libdir_flag_spec\""
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++ echo "----------------------------------------------------------------------"
++ echo "Libraries have been installed in:"
++ for libdir in $libdirs; do
++ $ECHO " $libdir"
++ done
++ echo
++ echo "If you ever happen to want to link against installed libraries"
++ echo "in a given directory, LIBDIR, you must either use libtool, and"
++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++ echo "flag during linking and do at least one of the following:"
++ if test -n "$shlibpath_var"; then
++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
++ echo " during execution"
++ fi
++ if test -n "$runpath_var"; then
++ echo " - add LIBDIR to the \`$runpath_var' environment variable"
++ echo " during linking"
++ fi
++ if test -n "$hardcode_libdir_flag_spec"; then
++ libdir=LIBDIR
++ eval flag=\"$hardcode_libdir_flag_spec\"
+- $ECHO " - use the \`$flag' linker flag"
+- fi
+- if test -n "$admincmds"; then
+- $ECHO " - have your system administrator run these commands:$admincmds"
+- fi
+- if test -f /etc/ld.so.conf; then
+- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+- fi
+- echo
++ $ECHO " - use the \`$flag' linker flag"
++ fi
++ if test -n "$admincmds"; then
++ $ECHO " - have your system administrator run these commands:$admincmds"
++ fi
++ if test -f /etc/ld.so.conf; then
++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++ fi
++ echo
+- echo "See any operating system documentation about shared libraries for"
+- case $host in
+- solaris2.[6789]|solaris2.1[0-9])
+- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+- echo "pages."
+- ;;
+- *)
+- echo "more information, such as the ld(1) and ld.so(8) manual pages."
+- ;;
+- esac
+- echo "----------------------------------------------------------------------"
++ echo "See any operating system documentation about shared libraries for"
++ case $host in
++ solaris2.[6789]|solaris2.1[0-9])
++ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++ echo "pages."
++ ;;
++ *)
++ echo "more information, such as the ld(1) and ld.so(8) manual pages."
++ ;;
++ esac
++ echo "----------------------------------------------------------------------"
++ fi
+ exit $EXIT_SUCCESS
+ }
--macro_version='2.2.7a'
--macro_revision='1.3134'
-+macro_version='2.4'
-+macro_revision='1.3293'
+-test "$mode" = finish && func_mode_finish ${1+"$@"}
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+ # func_mode_install arg...
+@@ -2077,7 +2786,7 @@ func_mode_install ()
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+- install_prog="$install_prog$func_quote_for_eval_result"
++ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+@@ -2097,7 +2806,7 @@ func_mode_install ()
+ do
+ arg2=
+ if test -n "$dest"; then
+- files="$files $dest"
++ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+@@ -2135,11 +2844,11 @@ func_mode_install ()
-@@ -5106,7 +5112,7 @@
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
- $as_echo_n "checking how to print strings... " >&6; }
- # Test print first, because it will be a builtin if present.
--if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
- elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -5792,8 +5798,8 @@
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-- = c,a/b,, \
-+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-+ = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-@@ -5842,6 +5848,80 @@
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+- install_prog="$install_prog $func_quote_for_eval_result"
++ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+- install_shared_prog="$install_shared_prog $func_quote_for_eval_result"
++ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+ test -z "$install_prog" && \
+@@ -2151,7 +2860,7 @@ func_mode_install ()
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+- install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
++ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+@@ -2209,10 +2918,13 @@ func_mode_install ()
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+- staticlibs="$staticlibs $file"
++ func_append staticlibs " $file"
+ ;;
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-+if test "${lt_cv_to_host_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-+ ;;
-+ esac
-+ ;;
-+ *-*-cygwin* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-+ ;;
-+ esac
-+ ;;
-+ * ) # unhandled hosts (and "normal" native builds)
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+esac
-+
-+fi
-+
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-+if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ #assume ordinary cross tools, or native build.
-+lt_cv_to_tool_file_cmd=func_convert_file_noop
-+case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+fi
-+
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
-+
-+
+ *.la)
++ func_resolve_sysroot "$file"
++ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+@@ -2226,23 +2938,30 @@ func_mode_install ()
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+- *) current_libdirs="$current_libdirs $libdir" ;;
++ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+- *) future_libdirs="$future_libdirs $libdir" ;;
++ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+- dir="$dir$objdir"
++ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$libdir"
++ destlibdir=$func_stripname_result
+
++ func_stripname '' '/' "$destdir"
++ s_destdir=$func_stripname_result
+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
- $as_echo_n "checking for $LD option to reload object files... " >&6; }
- if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -5858,6 +5938,11 @@
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ if test "$GCC" != yes; then
-+ reload_cmds=false
-+ fi
-+ ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6026,7 +6111,8 @@
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
-- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ # Keep this pattern in sync with the one in func_win32_libid.
-+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-@@ -6103,11 +6189,6 @@
- lt_cv_deplibs_check_method=pass_all
- ;;
+ # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
--linux-uclibc*)
-- lt_cv_deplibs_check_method=pass_all
-- lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
-- ;;
--
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-@@ -6185,6 +6266,21 @@
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
- $as_echo "$lt_cv_deplibs_check_method" >&6; }
-+
-+file_magic_glob=
-+want_nocaseglob=no
-+if test "$build" = "$host"; then
-+ case $host_os in
-+ mingw* | pw32*)
-+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-+ want_nocaseglob=yes
-+ else
-+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
-+ fi
-+ ;;
-+ esac
-+fi
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+@@ -2315,7 +3034,7 @@ func_mode_install ()
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
++ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+@@ -2503,7 +3222,7 @@ func_mode_install ()
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+- if test -n "$current_libdirs" && $opt_finish; then
++ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+@@ -2512,7 +3231,7 @@ func_mode_install ()
+ fi
+ }
+
+-test "$mode" = install && func_mode_install ${1+"$@"}
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+ # func_generate_dlsyms outputname originator pic_p
+@@ -2559,6 +3278,18 @@ extern \"C\" {
+ #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+ #endif
+
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
+
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6200,9 +6296,162 @@
+ /* External symbol declarations for the compiler. */\
+ "
+
+@@ -2570,21 +3301,22 @@ extern \"C\" {
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+- func_verbose "extracting global C symbols from \`$progfile'"
+- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
++ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+- $MV "$nlist"T "$nlist"
++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+- $EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T
+- $MV "$nlist"T "$nlist"
++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+@@ -2593,23 +3325,23 @@ extern \"C\" {
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+- ${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' < "$nlist" > "$export_symbols"
++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+- echo EXPORTS > "$output_objdir/$outputname.def"
+- cat "$export_symbols" >> "$output_objdir/$outputname.def"
++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+- ${SED} -e 's/\([].[*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/' < "$export_symbols" > "$output_objdir/$outputname.exp"
+- $GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T
+- $MV "$nlist"T "$nlist"
++ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+- echo EXPORTS > "$output_objdir/$outputname.def"
+- cat "$nlist" >> "$output_objdir/$outputname.def"
++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+@@ -2620,10 +3352,52 @@ extern \"C\" {
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+- $opt_dry_run || {
+- $ECHO ": $name " >> "$nlist"
+- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+- }
++ case $host in
++ *cygwin* | *mingw* | *cegcc* )
++ # if an import library, we need to obtain dlname
++ if func_win32_import_lib_p "$dlprefile"; then
++ func_tr_sh "$dlprefile"
++ eval "curr_lafile=\$libfile_$func_tr_sh_result"
++ dlprefile_dlbasename=""
++ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++ # Use subshell, to avoid clobbering current variable values
++ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++ if test -n "$dlprefile_dlname" ; then
++ func_basename "$dlprefile_dlname"
++ dlprefile_dlbasename="$func_basename_result"
++ else
++ # no lafile. user explicitly requested -dlpreopen <import library>.
++ $sharedlib_from_linklib_cmd "$dlprefile"
++ dlprefile_dlbasename=$sharedlib_from_linklib_result
++ fi
++ fi
++ $opt_dry_run || {
++ if test -n "$dlprefile_dlbasename" ; then
++ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++ else
++ func_warning "Could not compute DLL name from $name"
++ eval '$ECHO ": $name " >> "$nlist"'
++ fi
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++ }
++ else # not an import lib
++ $opt_dry_run || {
++ eval '$ECHO ": $name " >> "$nlist"'
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++ }
++ fi
++ ;;
++ *)
++ $opt_dry_run || {
++ eval '$ECHO ": $name " >> "$nlist"'
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++ }
++ ;;
++ esac
+ done
+
+ $opt_dry_run || {
+@@ -2661,26 +3435,9 @@ typedef struct {
+ const char *name;
+ void *address;
+ } lt_dlsymlist;
+-"
+- case $host in
+- *cygwin* | *mingw* | *cegcc* )
+- echo >> "$output_objdir/$my_dlsyms" "\
+-/* DATA imports from DLLs on WIN32 con't be const, because
+- runtime relocations are performed -- see ld's documentation
+- on pseudo-relocs. */"
+- lt_dlsym_const= ;;
+- *osf5*)
+- echo >> "$output_objdir/$my_dlsyms" "\
+-/* This system does not cope well with relocations in const data */"
+- lt_dlsym_const= ;;
+- *)
+- lt_dlsym_const=const ;;
+- esac
+-
+- echo >> "$output_objdir/$my_dlsyms" "\
+-extern $lt_dlsym_const lt_dlsymlist
++extern LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[];
+-$lt_dlsym_const lt_dlsymlist
++LT_DLSYM_CONST lt_dlsymlist
+ lt_${my_prefix}_LTX_preloaded_symbols[] =
+ {\
+ { \"$my_originator\", (void *) 0 },"
+@@ -2736,7 +3493,7 @@ static const void *lt_preloaded_setup() {
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+- *) symtab_cflags="$symtab_cflags $arg" ;;
++ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+@@ -2796,9 +3553,11 @@ func_win32_libid ()
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+- if $OBJDUMP -f "$1" | $SED -e '10q' 2>/dev/null |
+- $EGREP 'file format (pe-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+- win32_nmres=`$NM -f posix -A "$1" |
++ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
++ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+@@ -2827,6 +3586,131 @@ func_win32_libid ()
+ $ECHO "$win32_libid_type"
+ }
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++# $sharedlib_from_linklib_cmd
++# Result is available in the variable
++# $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++ $opt_debug
++ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
+
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++ $opt_debug
++ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++ $SED '/^Contents of section '"$match_literal"':/{
++ # Place marker at beginning of archive member dllname section
++ s/.*/====MARK====/
++ p
++ d
++ }
++ # These lines can sometimes be longer than 43 characters, but
++ # are always uninteresting
++ /:[ ]*file format pe[i]\{,1\}-/d
++ /^In archive [^:]*:/d
++ # Ensure marker is printed
++ /^====MARK====/p
++ # Remove all lines with less than 43 characters
++ /^.\{43\}/!d
++ # From remaining lines, remove first 43 characters
++ s/^.\{43\}//' |
++ $SED -n '
++ # Join marker and all lines until next marker into a single line
++ /^====MARK====/ b para
++ H
++ $ b para
++ b
++ :para
++ x
++ s/\n//g
++ # Remove the marker
++ s/^====MARK====//
++ # Remove trailing dots and whitespace
++ s/[\. \t]*$//
++ # Print
++ /./p' |
++ # we now have a list, one entry per line, of the stringified
++ # contents of the appropriate section of all members of the
++ # archive which possess that section. Heuristic: eliminate
++ # all those which have a first or second character that is
++ # a '.' (that is, objdump's representation of an unprintable
++ # character.) This should work for all archives with less than
++ # 0x302f exports -- but will fail for DLLs whose name actually
++ # begins with a literal '.' or a single character followed by
++ # a '.'.
++ #
++ # Of those that remain, print the first one.
++ $SED -e '/^\./d;/^.\./d;q'
++}
+
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++ $opt_debug
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++ test -n "$func_cygming_gnu_implib_tmp"
++}
+
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++ $opt_debug
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++ test -n "$func_cygming_ms_implib_tmp"
++}
+
-+
-+
-+
-+
-+
-+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
-+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$DLLTOOL"; then
-+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DLLTOOL=$ac_cv_prog_DLLTOOL
-+if test -n "$DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-+$as_echo "$DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DLLTOOL"; then
-+ ac_ct_DLLTOOL=$DLLTOOL
-+ # Extract the first word of "dlltool", so it can be a program name with args.
-+set dummy dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_DLLTOOL"; then
-+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-+if test -n "$ac_ct_DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-+$as_echo "$ac_ct_DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_DLLTOOL" = x; then
-+ DLLTOOL="false"
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++# $sharedlib_from_linklib_cmd
++# Result is available in the variable
++# $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++ $opt_debug
++ if func_cygming_gnu_implib_p "$1" ; then
++ # binutils import library
++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++ elif func_cygming_ms_implib_p "$1" ; then
++ # ms-generated import library
++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DLLTOOL=$ac_ct_DLLTOOL
++ # unknown
++ sharedlib_from_linklib_result=""
++ fi
++}
+
+
+ # func_extract_an_archive dir oldlib
+@@ -2917,7 +3801,7 @@ func_extract_archives ()
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+@@ -2932,7 +3816,7 @@ func_extract_archives ()
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+@@ -3014,7 +3898,110 @@ func_fallback_echo ()
+ _LTECHO_EOF'
+ }
+ ECHO=\"$qECHO\"
+- fi\
+ fi
-+else
-+ DLLTOOL="$ac_cv_prog_DLLTOOL"
-+fi
-+
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+
-+
-+
-+
-+
-+
-+
+
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++ lt_script_arg0=\$0
++ shift
++ for lt_opt
++ do
++ case \"\$lt_opt\" in
++ --lt-debug) lt_option_debug=1 ;;
++ --lt-dump-script)
++ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++ cat \"\$lt_dump_D/\$lt_dump_F\"
++ exit 0
++ ;;
++ --lt-*)
++ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++ exit 1
++ ;;
++ esac
++ done
+
++ # Print the debug banner immediately:
++ if test -n \"\$lt_option_debug\"; then
++ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++ fi
++}
+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-+if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_sharedlib_from_linklib_cmd='unknown'
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++ lt_dump_args_N=1;
++ for lt_arg
++ do
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++ done
++}
+
-+case $host_os in
-+cygwin* | mingw* | pw32* | cegcc*)
-+ # two different shell functions defined in ltmain.sh
-+ # decide which to use based on capabilities of $DLLTOOL
-+ case `$DLLTOOL --help 2>&1` in
-+ *--identify-strict*)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++# Core function for launching the target application
++func_exec_program_core ()
++{
++"
++ case $host in
++ # Backslashes separate directories on plain windows
++ *-*-mingw | *-*-os2* | *-cegcc*)
++ $ECHO "\
++ if test -n \"\$lt_option_debug\"; then
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++ func_lt_dump_args \${1+\"\$@\"} 1>&2
++ fi
++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
+ ;;
++
+ *)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ $ECHO "\
++ if test -n \"\$lt_option_debug\"; then
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++ func_lt_dump_args \${1+\"\$@\"} 1>&2
++ fi
++ exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
+ ;;
+ esac
-+ ;;
-+*)
-+ # fallback: assume linklib IS sharedlib
-+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-+ ;;
-+esac
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-+
-+
-+
-+
++ $ECHO "\
++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++ exit 1
++}
+
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++ for lt_wr_arg
++ do
++ case \$lt_wr_arg in
++ --lt-*) ;;
++ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++ esac
++ shift
++ done
++ func_exec_program_core \${1+\"\$@\"}
++}
+
++ # Parse options
++ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+@@ -3078,7 +4065,7 @@ _LTECHO_EOF'
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+- if relink_command_output=\`eval \"\$relink_command\" 2>&1\`; then :
++ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+@@ -3102,6 +4089,18 @@ _LTECHO_EOF'
+
+ if test -f \"\$progdir/\$program\"; then"
+
++ # fixup the dll searchpath if we need to.
++ #
++ # Fix the DLL searchpath if we need to. Do this before prepending
++ # to shlibpath, because on Windows, both are PATH and uninstalled
++ # libraries must come first.
++ if test -n "$dllsearchpath"; then
++ $ECHO "\
++ # Add the dll search path components to the executable PATH
++ PATH=$dllsearchpath:\$PATH
++"
++ fi
+
-+if test -n "$ac_tool_prefix"; then
-+ for ac_prog in ar
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6218,7 +6467,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6238,11 +6487,15 @@
- fi
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+@@ -3116,35 +4115,10 @@ _LTECHO_EOF'
+ "
+ fi
+
+- # fixup the dll searchpath if we need to.
+- if test -n "$dllsearchpath"; then
+- $ECHO "\
+- # Add the dll search path components to the executable PATH
+- PATH=$dllsearchpath:\$PATH
+-"
+- fi
+-
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+-"
+- case $host in
+- # Backslashes separate directories on plain windows
+- *-*-mingw | *-*-os2* | *-cegcc*)
+- $ECHO "\
+- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+-"
+- ;;
+-
+- *)
+- $ECHO "\
+- exec \"\$progdir/\$program\" \${1+\"\$@\"}
+-"
+- ;;
+- esac
+- $ECHO "\
+- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+- exit 1
++ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+@@ -3158,166 +4132,6 @@ fi\
+ }
-+ test -n "$AR" && break
-+ done
- fi
--if test -z "$ac_cv_prog_AR"; then
-+if test -z "$AR"; then
- ac_ct_AR=$AR
-- # Extract the first word of "ar", so it can be a program name with args.
--set dummy ar; ac_word=$2
-+ for ac_prog in ar
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6258,7 +6511,7 @@
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_ac_ct_AR="ar"
-+ ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6277,6 +6530,10 @@
- $as_echo "no" >&6; }
- fi
+-# func_to_host_path arg
+-#
+-# Convert paths to host format when used with build tools.
+-# Intended for use with "native" mingw (where libtool itself
+-# is running under the msys shell), or in the following cross-
+-# build environments:
+-# $build $host
+-# mingw (msys) mingw [e.g. native]
+-# cygwin mingw
+-# *nix + wine mingw
+-# where wine is equipped with the `winepath' executable.
+-# In the native mingw case, the (msys) shell automatically
+-# converts paths for any non-msys applications it launches,
+-# but that facility isn't available from inside the cwrapper.
+-# Similar accommodations are necessary for $host mingw and
+-# $build cygwin. Calling this function does no harm for other
+-# $host/$build combinations not listed above.
+-#
+-# ARG is the path (on $build) that should be converted to
+-# the proper representation for $host. The result is stored
+-# in $func_to_host_path_result.
+-func_to_host_path ()
+-{
+- func_to_host_path_result="$1"
+- if test -n "$1"; then
+- case $host in
+- *mingw* )
+- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+- case $build in
+- *mingw* ) # actually, msys
+- # awkward: cmd appends spaces to result
+- func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null |
+- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+- ;;
+- *cygwin* )
+- func_to_host_path_result=`cygpath -w "$1" |
+- $SED -e "$lt_sed_naive_backslashify"`
+- ;;
+- * )
+- # Unfortunately, winepath does not exit with a non-zero
+- # error code, so we are forced to check the contents of
+- # stdout. On the other hand, if the command is not
+- # found, the shell will set an exit code of 127 and print
+- # *an error message* to stdout. So we must check for both
+- # error code of zero AND non-empty stdout, which explains
+- # the odd construction:
+- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+- func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" |
+- $SED -e "$lt_sed_naive_backslashify"`
+- else
+- # Allow warning below.
+- func_to_host_path_result=
+- fi
+- ;;
+- esac
+- if test -z "$func_to_host_path_result" ; then
+- func_error "Could not determine host path corresponding to"
+- func_error " \`$1'"
+- func_error "Continuing, but uninstalled executables may not work."
+- # Fallback:
+- func_to_host_path_result="$1"
+- fi
+- ;;
+- esac
+- fi
+-}
+-# end: func_to_host_path
+-
+-# func_to_host_pathlist arg
+-#
+-# Convert pathlists to host format when used with build tools.
+-# See func_to_host_path(), above. This function supports the
+-# following $build/$host combinations (but does no harm for
+-# combinations not listed here):
+-# $build $host
+-# mingw (msys) mingw [e.g. native]
+-# cygwin mingw
+-# *nix + wine mingw
+-#
+-# Path separators are also converted from $build format to
+-# $host format. If ARG begins or ends with a path separator
+-# character, it is preserved (but converted to $host format)
+-# on output.
+-#
+-# ARG is a pathlist (on $build) that should be converted to
+-# the proper representation on $host. The result is stored
+-# in $func_to_host_pathlist_result.
+-func_to_host_pathlist ()
+-{
+- func_to_host_pathlist_result="$1"
+- if test -n "$1"; then
+- case $host in
+- *mingw* )
+- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+- # Remove leading and trailing path separator characters from
+- # ARG. msys behavior is inconsistent here, cygpath turns them
+- # into '.;' and ';.', and winepath ignores them completely.
+- func_stripname : : "$1"
+- func_to_host_pathlist_tmp1=$func_stripname_result
+- case $build in
+- *mingw* ) # Actually, msys.
+- # Awkward: cmd appends spaces to result.
+- func_to_host_pathlist_result=`
+- ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null |
+- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+- ;;
+- *cygwin* )
+- func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" |
+- $SED -e "$lt_sed_naive_backslashify"`
+- ;;
+- * )
+- # unfortunately, winepath doesn't convert pathlists
+- func_to_host_pathlist_result=""
+- func_to_host_pathlist_oldIFS=$IFS
+- IFS=:
+- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+- IFS=$func_to_host_pathlist_oldIFS
+- if test -n "$func_to_host_pathlist_f" ; then
+- func_to_host_path "$func_to_host_pathlist_f"
+- if test -n "$func_to_host_path_result" ; then
+- if test -z "$func_to_host_pathlist_result" ; then
+- func_to_host_pathlist_result="$func_to_host_path_result"
+- else
+- func_append func_to_host_pathlist_result ";$func_to_host_path_result"
+- fi
+- fi
+- fi
+- done
+- IFS=$func_to_host_pathlist_oldIFS
+- ;;
+- esac
+- if test -z "$func_to_host_pathlist_result"; then
+- func_error "Could not determine the host path(s) corresponding to"
+- func_error " \`$1'"
+- func_error "Continuing, but uninstalled executables may not work."
+- # Fallback. This may break if $1 contains DOS-style drive
+- # specifications. The fix is not to complicate the expression
+- # below, but for the user to provide a working wine installation
+- # with winepath so that path translation in the cross-to-mingw
+- # case works properly.
+- lt_replace_pathsep_nix_to_dos="s|:|;|g"
+- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+- $SED -e "$lt_replace_pathsep_nix_to_dos"`
+- fi
+- # Now, add the leading and trailing path separators back
+- case "$1" in
+- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+- ;;
+- esac
+- case "$1" in
+- *: ) func_append func_to_host_pathlist_result ";"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+-}
+-# end: func_to_host_pathlist
+-
+ # func_emit_cwrapperexe_src
+ # emit the source code for a wrapper executable on stdout
+ # Must ONLY be called from within func_mode_link because
+@@ -3334,10 +4148,6 @@ func_emit_cwrapperexe_src ()
-+
-+ test -n "$ac_ct_AR" && break
-+done
-+
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
-@@ -6288,16 +6545,72 @@
- esac
- AR=$ac_ct_AR
- fi
--else
-- AR="$ac_cv_prog_AR"
- fi
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+-
+- Currently, it simply execs the wrapper *script* "$SHELL $output",
+- but could eventually absorb all of the scripts functionality and
+- exec $objdir/$outputname directly.
+ */
+ EOF
+ cat <<"EOF"
+@@ -3462,22 +4272,13 @@ int setenv (const char *, const char *, int);
+ if (stale) { free ((void *) stale); stale = 0; } \
+ } while (0)
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
-+: ${AR=ar}
-+: ${AR_FLAGS=cru}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-+$as_echo_n "checking for archiver @FILE support... " >&6; }
-+if test "${lt_cv_ar_at_file+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_ar_at_file=no
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
+-#undef LTWRAPPER_DEBUGPRINTF
+-#if defined LT_DEBUGWRAPPER
+-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+-static void
+-ltwrapper_debugprintf (const char *fmt, ...)
+-{
+- va_list args;
+- va_start (args, fmt);
+- (void) vfprintf (stderr, fmt, args);
+- va_end (args);
+-}
++#if defined(LT_DEBUGWRAPPER)
++static int lt_debug = 1;
+ #else
+-# define LTWRAPPER_DEBUGPRINTF(args)
++static int lt_debug = 0;
+ #endif
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ echo conftest.$ac_objext > conftest.lst
-+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -eq 0; then
-+ # Ensure the archiver fails upon bogus file names.
-+ rm -f conftest.$ac_objext libconftest.a
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -ne 0; then
-+ lt_cv_ar_at_file=@
-+ fi
-+ fi
-+ rm -f conftest.* libconftest.a
+-const char *program_name = NULL;
++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ void *xmalloc (size_t num);
+ char *xstrdup (const char *string);
+@@ -3487,7 +4288,10 @@ char *chase_symlinks (const char *pathspec);
+ int make_executable (const char *path);
+ int check_executable (const char *path);
+ char *strendzap (char *str, const char *pat);
+-void lt_fatal (const char *message, ...);
++void lt_debugprintf (const char *file, int line, const char *fmt, ...);
++void lt_fatal (const char *file, int line, const char *message, ...);
++static const char *nonnull (const char *s);
++static const char *nonempty (const char *s);
+ void lt_setenv (const char *name, const char *value);
+ char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+ void lt_update_exe_path (const char *name, const char *value);
+@@ -3497,14 +4301,14 @@ void lt_dump_script (FILE *f);
+ EOF
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-+$as_echo "$lt_cv_ar_at_file" >&6; }
+ cat <<EOF
+-const char * MAGIC_EXE = "$magic_exe";
++volatile const char * MAGIC_EXE = "$magic_exe";
+ const char * LIB_PATH_VARNAME = "$shlibpath_var";
+ EOF
-+if test "x$lt_cv_ar_at_file" = xno; then
-+ archiver_list_spec=
-+else
-+ archiver_list_spec=$lt_cv_ar_at_file
-+fi
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+- func_to_host_pathlist "$temp_rpath"
++ func_to_host_path "$temp_rpath"
+ cat <<EOF
+-const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
++const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+ EOF
+ else
+ cat <<"EOF"
+@@ -3513,10 +4317,10 @@ EOF
+ fi
+ if test -n "$dllsearchpath"; then
+- func_to_host_pathlist "$dllsearchpath:"
++ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+ const char * EXE_PATH_VARNAME = "PATH";
+-const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
++const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+ EOF
+ else
+ cat <<"EOF"
+@@ -3539,12 +4343,10 @@ EOF
+ cat <<"EOF"
+ #define LTWRAPPER_OPTION_PREFIX "--lt-"
+-#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
-@@ -6639,8 +6952,8 @@
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+-static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
+ static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+-
+ static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
++static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
- # Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
--lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+ int
+ main (int argc, char *argv[])
+@@ -3561,10 +4363,13 @@ main (int argc, char *argv[])
+ int i;
- # Handle CRLF in mingw tool chain
- opt_cr=
-@@ -6676,6 +6989,7 @@
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
-+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+ program_name = (char *) xstrdup (base_name (argv[0]));
+- LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
+- LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
++ newargz = XMALLOC (char *, argc + 1);
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -6717,6 +7031,18 @@
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT_DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT_DLSYM_CONST
-+#else
-+# define LT_DLSYM_CONST const
-+#endif
+- /* very simple arg parsing; don't want to rely on getopt */
++ /* very simple arg parsing; don't want to rely on getopt
++ * also, copy all non cwrapper options to newargz, except
++ * argz[0], which is handled differently
++ */
++ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+@@ -3581,21 +4386,54 @@ EOF
+ lt_dump_script (stdout);
+ return 0;
+ }
++ if (strcmp (argv[i], debug_opt) == 0)
++ {
++ lt_debug = 1;
++ continue;
++ }
++ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
++ {
++ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
++ namespace, but it is not one of the ones we know about and
++ have already dealt with, above (inluding dump-script), then
++ report an error. Otherwise, targets might begin to believe
++ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
++ namespace. The first time any user complains about this, we'll
++ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
++ or a configure.ac-settable value.
++ */
++ lt_fatal (__FILE__, __LINE__,
++ "unrecognized %s option: '%s'",
++ ltwrapper_option_prefix, argv[i]);
++ }
++ /* otherwise ... */
++ newargz[++newargc] = xstrdup (argv[i]);
+ }
++ newargz[++newargc] = NULL;
+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -6728,7 +7054,7 @@
- cat <<_LT_EOF >> conftest.$ac_ext
++EOF
++ cat <<EOF
++ /* The GNU banner must be the first non-error debug message */
++ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
++EOF
++ cat <<"EOF"
++ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
++ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
- /* The mapping between symbol names and symbols. */
--const struct {
-+LT_DLSYM_CONST struct {
- const char *name;
- void *address;
- }
-@@ -6754,8 +7080,8 @@
- _LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-+ lt_globsym_save_LIBS=$LIBS
-+ lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -6765,8 +7091,8 @@
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-+ LIBS=$lt_globsym_save_LIBS
-+ CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
-@@ -6803,6 +7129,17 @@
- $as_echo "ok" >&6; }
- fi
+- newargz = XMALLOC (char *, argc + 1);
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+- lt_fatal ("Couldn't find %s", argv[0]);
+- LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+- tmp_pathspec));
++ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) found exe (before symlink chase) at: %s\n",
++ tmp_pathspec);
-+# Response file support.
-+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-+ nm_file_list_spec='@'
-+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
-+ nm_file_list_spec='@'
-+fi
-+
-+
-+
-+
-+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+- LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+- actual_cwrapper_path));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) found exe (after symlink chase) at: %s\n",
++ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+- actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
++ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+ /* wrapper name transforms */
+@@ -3613,8 +4451,9 @@ EOF
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
-@@ -6824,6 +7161,44 @@
+- LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+- target_name));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) libtool target name: %s\n",
++ target_name);
+ EOF
+ cat <<EOF
+@@ -3664,35 +4503,19 @@ EOF
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
++ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
++ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
++ because on Windows, both *_VARNAMEs are PATH but uninstalled
++ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
++ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-+$as_echo_n "checking for sysroot... " >&6; }
-+
-+# Check whether --with-libtool-sysroot was given.
-+if test "${with_libtool_sysroot+set}" = set; then :
-+ withval=$with_libtool_sysroot;
-+else
-+ with_libtool_sysroot=no
-+fi
-+
-+
-+lt_sysroot=
-+case ${with_libtool_sysroot} in #(
-+ yes)
-+ if test "$GCC" = yes; then
-+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-+ fi
-+ ;; #(
-+ /*)
-+ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
-+ ;; #(
-+ no|'')
-+ ;; #(
-+ *)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
-+$as_echo "${with_libtool_sysroot}" >&6; }
-+ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
-+ ;;
-+esac
-+
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-+$as_echo "${lt_sysroot:-no}" >&6; }
-+
-+
-+
-+
-+
- # Check whether --enable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then :
- enableval=$enable_libtool_lock;
-@@ -7030,6 +7405,123 @@
+- newargc=0;
+- for (i = 1; i < argc; i++)
+- {
+- if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+- {
+- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+- namespace, but it is not one of the ones we know about and
+- have already dealt with, above (inluding dump-script), then
+- report an error. Otherwise, targets might begin to believe
+- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+- namespace. The first time any user complains about this, we'll
+- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+- or a configure.ac-settable value.
+- */
+- lt_fatal ("Unrecognized option in %s namespace: '%s'",
+- ltwrapper_option_prefix, argv[i]);
+- }
+- /* otherwise ... */
+- newargz[++newargc] = xstrdup (argv[i]);
+- }
+- newargz[++newargc] = NULL;
+-
+- LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
++ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
++ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
++ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
++ i, nonnull (newargz[i]));
+ }
- need_locks="$enable_libtool_lock"
+ EOF
+@@ -3706,7 +4529,9 @@ EOF
+ if (rval == -1)
+ {
+ /* failed to start process */
+- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) failed to launch target \"%s\": %s\n",
++ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+@@ -3728,7 +4553,7 @@ xmalloc (size_t num)
+ {
+ void *p = (void *) malloc (num);
+ if (!p)
+- lt_fatal ("Memory exhausted");
++ lt_fatal (__FILE__, __LINE__, "memory exhausted");
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$MANIFEST_TOOL"; then
-+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-+if test -n "$MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-+$as_echo "$MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
-+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
-+ # Extract the first word of "mt", so it can be a program name with args.
-+set dummy mt; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-+if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
-+ MANIFEST_TOOL=":"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
-+ fi
-+else
-+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
-+fi
-+
-+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-+if test "${lt_cv_path_mainfest_tool+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_path_mainfest_tool=no
-+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
-+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-+ cat conftest.err >&5
-+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-+ lt_cv_path_mainfest_tool=yes
-+ fi
-+ rm -f conftest*
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-+if test "x$lt_cv_path_mainfest_tool" != xyes; then
-+ MANIFEST_TOOL=:
-+fi
-+
-+
-+
-+
-+
+ return p;
+ }
+@@ -3762,8 +4587,8 @@ check_executable (const char *path)
+ {
+ struct stat st;
- case $host_os in
- rhapsody* | darwin*)
-@@ -7593,6 +8085,8 @@
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
-+ echo "$RANLIB libconftest.a" >&5
-+ $RANLIB libconftest.a 2>&5
- cat > conftest.c << _LT_EOF
- int main() { return 0;}
- _LT_EOF
-@@ -7788,7 +8282,8 @@
- LIBTOOL_DEPS="$ltmain"
+- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
+- path ? (*path ? path : "EMPTY!") : "NULL!"));
++ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
++ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
- # Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+LIBTOOL='$(SHELL) $(top_builddir)'
-+LIBTOOL="$LIBTOOL/${host_alias}-libtool"
+@@ -3780,8 +4605,8 @@ make_executable (const char *path)
+ int rval = 0;
+ struct stat st;
+- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
+- path ? (*path ? path : "EMPTY!") : "NULL!"));
++ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
++ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+@@ -3807,8 +4632,8 @@ find_executable (const char *wrapper)
+ int tmp_len;
+ char *concat_name;
-@@ -7877,7 +8372,7 @@
- esac
+- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
+- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
++ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
++ nonempty (wrapper));
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+@@ -3861,7 +4686,8 @@ find_executable (const char *wrapper)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+- lt_fatal ("getcwd failed");
++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+@@ -3886,7 +4712,8 @@ find_executable (const char *wrapper)
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+- lt_fatal ("getcwd failed");
++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+@@ -3912,8 +4739,9 @@ chase_symlinks (const char *pathspec)
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+- tmp_pathspec));
++ lt_debugprintf (__FILE__, __LINE__,
++ "checking path component for symlinks: %s\n",
++ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+@@ -3935,8 +4763,9 @@ chase_symlinks (const char *pathspec)
+ }
+ else
+ {
+- char *errstr = strerror (errno);
+- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
++ lt_fatal (__FILE__, __LINE__,
++ "error accessing file \"%s\": %s",
++ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+@@ -3949,7 +4778,8 @@ chase_symlinks (const char *pathspec)
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+- lt_fatal ("Could not follow symlinks for %s", pathspec);
++ lt_fatal (__FILE__, __LINE__,
++ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+ #endif
+@@ -3975,11 +4805,25 @@ strendzap (char *str, const char *pat)
+ return str;
+ }
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8175,8 +8670,6 @@
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
++void
++lt_debugprintf (const char *file, int line, const char *fmt, ...)
++{
++ va_list args;
++ if (lt_debug)
++ {
++ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
++ va_start (args, fmt);
++ (void) vfprintf (stderr, fmt, args);
++ va_end (args);
++ }
++}
++
+ static void
+-lt_error_core (int exit_status, const char *mode,
++lt_error_core (int exit_status, const char *file,
++ int line, const char *mode,
+ const char *message, va_list ap)
+ {
+- fprintf (stderr, "%s: %s: ", program_name, mode);
++ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
--$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+@@ -3988,20 +4832,32 @@ lt_error_core (int exit_status, const char *mode,
+ }
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
-@@ -8342,6 +8835,12 @@
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ lt_prog_compiler_wl='-Wl,-Wl,,'
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -8404,7 +8903,7 @@
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
-@@ -8461,13 +8960,17 @@
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
- esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
--$as_echo "$lt_prog_compiler_pic" >&6; }
--
--
--
--
+ void
+-lt_fatal (const char *message, ...)
++lt_fatal (const char *file, int line, const char *message, ...)
+ {
+ va_list ap;
+ va_start (ap, message);
+- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
++ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+ }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
++static const char *
++nonnull (const char *s)
++{
++ return s ? s : "(null)";
++}
++
++static const char *
++nonempty (const char *s)
++{
++ return (s && !*s) ? "(empty)" : nonnull (s);
++}
++
+ void
+ lt_setenv (const char *name, const char *value)
+ {
+- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+- (name ? name : "<NULL>"),
+- (value ? value : "<NULL>")));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_setenv) setting '%s' to '%s'\n",
++ nonnull (name), nonnull (value));
+ {
+ #ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+@@ -4049,9 +4905,9 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
+ void
+ lt_update_exe_path (const char *name, const char *value)
+ {
+- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+- (name ? name : "<NULL>"),
+- (value ? value : "<NULL>")));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
++ nonnull (name), nonnull (value));
- #
- # Check to make sure the PIC flag actually works.
-@@ -8528,6 +9031,11 @@
+ if (name && *name && value && *value)
+ {
+@@ -4070,9 +4926,9 @@ lt_update_exe_path (const char *name, const char *value)
+ void
+ lt_update_lib_path (const char *name, const char *value)
+ {
+- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+- (name ? name : "<NULL>"),
+- (value ? value : "<NULL>")));
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
++ nonnull (name), nonnull (value));
+ if (name && *name && value && *value)
+ {
+@@ -4222,7 +5078,7 @@ EOF
+ func_win32_import_lib_p ()
+ {
+ $opt_debug
+- case `eval "$file_magic_cmd \"\$1\" 2>/dev/null" | $SED -e 10q` in
++ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+@@ -4401,9 +5257,9 @@ func_mode_link ()
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+- dlfiles="$dlfiles $arg"
++ func_append dlfiles " $arg"
+ else
+- dlprefiles="$dlprefiles $arg"
++ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+@@ -4427,7 +5283,7 @@ func_mode_link ()
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
++ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+@@ -4446,7 +5302,7 @@ func_mode_link ()
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+-# moreargs="$moreargs $fil"
++# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+@@ -4475,7 +5331,7 @@ func_mode_link ()
-+
-+
-+
-+
-+
- #
- # Check to make sure the static flag actually works.
- #
-@@ -8878,7 +9386,8 @@
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
-- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+- dlfiles="$dlfiles $pic_object"
++ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+@@ -4487,7 +5343,7 @@ func_mode_link ()
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+- dlprefiles="$dlprefiles $pic_object"
++ func_append dlprefiles " $pic_object"
+ prev=
+ fi
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -8926,7 +9435,7 @@
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -8977,12 +9486,12 @@
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
-- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+@@ -4557,12 +5413,12 @@ func_mode_link ()
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+- *) rpath="$rpath $arg" ;;
++ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+- *) xrpath="$xrpath $arg" ;;
++ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+@@ -4574,28 +5430,28 @@ func_mode_link ()
+ continue
+ ;;
+ weak)
+- weak_libs="$weak_libs $arg"
++ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+- linker_flags="$linker_flags $qarg"
+- compiler_flags="$compiler_flags $qarg"
++ func_append linker_flags " $qarg"
++ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+- compiler_flags="$compiler_flags $qarg"
++ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+- linker_flags="$linker_flags $qarg"
+- compiler_flags="$compiler_flags $wl$qarg"
++ func_append linker_flags " $qarg"
++ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+@@ -4686,15 +5542,16 @@ func_mode_link ()
+ ;;
+
+ -L*)
+- func_stripname '-L' '' "$arg"
+- dir=$func_stripname_result
+- if test -z "$dir"; then
++ func_stripname "-L" '' "$arg"
++ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
fi
+ fi
++ func_resolve_sysroot "$func_stripname_result"
++ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+@@ -4706,10 +5563,16 @@ func_mode_link ()
;;
esac
-@@ -8996,8 +9505,8 @@
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
+ case "$deplibs " in
+- *" -L$dir "*) ;;
++ *" -L$dir "* | *" $arg "*)
++ # Will only happen for absolute or sysroot arguments
++ ;;
+ *)
+- deplibs="$deplibs -L$dir"
+- lib_search_path="$lib_search_path $dir"
++ # Preserve sysroot, but never include relative directories
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
++ *) func_append deplibs " -L$dir" ;;
++ esac
++ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+@@ -4718,12 +5581,12 @@ func_mode_link ()
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+- *) dllsearchpath="$dllsearchpath:$dir";;
++ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+- *) dllsearchpath="$dllsearchpath:$testbindir";;
++ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+@@ -4747,7 +5610,7 @@ func_mode_link ()
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+- deplibs="$deplibs System.ltframework"
++ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+@@ -4758,9 +5621,6 @@ func_mode_link ()
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+- *-*-linux*)
+- test "X$arg" = "X-lc" && continue
+- ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+@@ -4770,7 +5630,7 @@ func_mode_link ()
+ ;;
+ esac
+ fi
+- deplibs="$deplibs $arg"
++ func_append deplibs " $arg"
+ continue
+ ;;
-@@ -9015,8 +9524,8 @@
+@@ -4782,8 +5642,8 @@ func_mode_link ()
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+- -model|-arch|-isysroot)
+- compiler_flags="$compiler_flags $arg"
++ -model|-arch|-isysroot|--sysroot)
++ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+@@ -4791,12 +5651,12 @@ func_mode_link ()
+ ;;
- _LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9062,8 +9571,8 @@
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+- compiler_flags="$compiler_flags $arg"
++ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
++ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+@@ -4863,13 +5723,17 @@ func_mode_link ()
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ =*)
++ func_stripname '=' '' "$dir"
++ dir=$lt_sysroot$func_stripname_result
++ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+- *) xrpath="$xrpath $dir" ;;
++ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+@@ -4922,8 +5786,8 @@ func_mode_link ()
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+- arg="$arg $func_quote_for_eval_result"
+- compiler_flags="$compiler_flags $func_quote_for_eval_result"
++ func_append arg " $func_quote_for_eval_result"
++ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+@@ -4938,9 +5802,9 @@ func_mode_link ()
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+- arg="$arg $wl$func_quote_for_eval_result"
+- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+- linker_flags="$linker_flags $func_quote_for_eval_result"
++ func_append arg " $wl$func_quote_for_eval_result"
++ func_append compiler_flags " $wl$func_quote_for_eval_result"
++ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+@@ -4968,24 +5832,27 @@ func_mode_link ()
+ arg="$func_quote_for_eval_result"
+ ;;
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9193,7 +9702,13 @@
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+- # -r[0-9][0-9]* specifies the processor on the SGI compiler
+- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+- # +DA*, +DD* enable 64-bit mode on the HP compiler
+- # -q* pass through compiler args for the IBM compiler
+- # -m*, -t[45]*, -txscale* pass through architecture-specific
+- # compiler args for GCC
+- # -F/path gives path to uninstalled frameworks, gcc on darwin
+- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+- # @file GCC response files
+- # -tp=* Portland pgcc target processor selection
++ # Flags to be passed through unchanged, with rationale:
++ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
++ # -r[0-9][0-9]* specify processor for the SGI compiler
++ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
++ # +DA*, +DD* enable 64-bit mode for the HP compiler
++ # -q* compiler args for the IBM compiler
++ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
++ # -F/path path to uninstalled frameworks, gcc on darwin
++ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
++ # @file GCC response files
++ # -tp=* Portland pgcc target processor selection
++ # --sysroot=* for sysroot support
++ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*)
++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+- compiler_flags="$compiler_flags $arg"
++ func_append compiler_flags " $arg"
+ continue
+ ;;
- int
-@@ -9206,22 +9721,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+@@ -4997,7 +5864,7 @@ func_mode_link ()
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
-+
-+fi
-+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+ *.$objext)
+ # A standard object.
+- objs="$objs $arg"
++ func_append objs " $arg"
+ ;;
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9233,7 +9755,13 @@
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
+ *.lo)
+@@ -5028,7 +5895,7 @@ func_mode_link ()
- int
-@@ -9246,22 +9774,29 @@
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+- dlfiles="$dlfiles $pic_object"
++ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+@@ -5040,7 +5907,7 @@ func_mode_link ()
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+- dlprefiles="$dlprefiles $pic_object"
++ func_append dlprefiles " $pic_object"
+ prev=
+ fi
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
-+
-+fi
-+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+@@ -5085,24 +5952,25 @@ func_mode_link ()
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -9306,20 +9841,63 @@
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
-- hardcode_libdir_flag_spec=' '
-- allow_undefined_flag=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- old_archive_from_new_cmds='true'
-- # FIXME: Should let the user specify the lib program.
-- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- enable_shared_with_static_runtimes=yes
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ file_list_spec='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ old_postinstall_cmds='chmod 644 $oldlib'
-+ postlink_cmds='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_from_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+ esac
- ;;
+ *.$libext)
+ # An archive.
+- deplibs="$deplibs $arg"
+- old_deplibs="$old_deplibs $arg"
++ func_append deplibs " $arg"
++ func_append old_deplibs " $arg"
+ continue
+ ;;
- darwin* | rhapsody*)
-@@ -9380,7 +9958,7 @@
+ *.la)
+ # A libtool-controlled library.
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-@@ -9388,7 +9966,7 @@
++ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+- dlfiles="$dlfiles $arg"
++ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+- dlprefiles="$dlprefiles $arg"
++ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+- deplibs="$deplibs $arg"
++ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+@@ -5127,7 +5995,7 @@ func_mode_link ()
+ func_fatal_help "the \`$prevarg' option requires an argument"
- hpux9*)
- if test "$GCC" = yes; then
-- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+- eval "arg=\"$export_dynamic_flag_spec\""
++ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+@@ -5144,11 +6012,13 @@ func_mode_link ()
+ else
+ shlib_search_path=
+ fi
+- eval "sys_lib_search_path=\"$sys_lib_search_path_spec\""
+- eval "sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\""
++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
++ func_to_tool_file "$output_objdir/"
++ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+@@ -5169,12 +6039,12 @@ func_mode_link ()
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+- if $opt_duplicate_deps ; then
++ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
fi
-@@ -9404,7 +9982,7 @@
+- libs="$libs $deplib"
++ func_append libs " $deplib"
+ done
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ if test "$linkmode" = lib; then
+@@ -5187,9 +6057,9 @@ func_mode_link ()
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
++ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+- pre_post_deps="$pre_post_deps $pre_post_dep"
++ func_append pre_post_deps " $pre_post_dep"
+ done
fi
-@@ -9428,10 +10006,10 @@
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ pre_post_deps=
+@@ -5256,8 +6126,9 @@ func_mode_link ()
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
++ func_resolve_sysroot "$lib"
+ case $lib in
+- *.la) func_source "$lib" ;;
++ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+@@ -5267,7 +6138,7 @@ func_mode_link ()
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+- *) deplibs="$deplibs $deplib" ;;
++ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+@@ -5288,11 +6159,11 @@ func_mode_link ()
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+- compiler_flags="$compiler_flags $deplib"
++ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+@@ -5377,7 +6248,7 @@ func_mode_link ()
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
++ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+@@ -5390,7 +6261,8 @@ func_mode_link ()
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+- newlib_search_path="$newlib_search_path $func_stripname_result"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+@@ -5404,7 +6276,8 @@ func_mode_link ()
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+- newlib_search_path="$newlib_search_path $func_stripname_result"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+@@ -5415,17 +6288,21 @@ func_mode_link ()
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+- dir=$func_stripname_result
++ func_resolve_sysroot "$func_stripname_result"
++ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+- *) xrpath="$xrpath $dir" ;;
++ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
;;
- esac
- else
-@@ -9510,23 +10088,36 @@
+- *.la) lib="$deplib" ;;
++ *.la)
++ func_resolve_sysroot "$deplib"
++ lib=$func_resolve_sysroot_result
++ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+@@ -5488,11 +6365,11 @@ func_mode_link ()
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+- newdlprefiles="$newdlprefiles $deplib"
++ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+- newdlfiles="$newdlfiles $deplib"
++ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+@@ -5538,7 +6415,7 @@ func_mode_link ()
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
++ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+@@ -5546,8 +6423,8 @@ func_mode_link ()
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++ test -n "$dlopen" && func_append dlfiles " $dlopen"
++ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-+if test "${lt_cv_irix_exported_symbol+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
--int foo(void) {}
-+int foo (void) { return 0; }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
--
-+ lt_cv_irix_exported_symbol=yes
-+else
-+ lt_cv_irix_exported_symbol=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-- LDFLAGS="$save_LDFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test "$pass" = conv; then
+@@ -5558,20 +6435,20 @@ func_mode_link ()
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+- convenience="$convenience $ladir/$objdir/$old_library"
+- old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ func_append convenience " $ladir/$objdir/$old_library"
++ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+- if $opt_duplicate_deps ; then
++ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+- tmp_libs="$tmp_libs $deplib"
++ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+@@ -5579,9 +6456,15 @@ func_mode_link ()
+
+ # Get the name of the library we link against.
+ linklib=
+- for l in $old_library $library_names; do
+- linklib="$l"
+- done
++ if test -n "$old_library" &&
++ { test "$prefer_static_libs" = yes ||
++ test "$prefer_static_libs,$installed" = "built,no"; }; then
++ linklib=$old_library
++ else
++ for l in $old_library $library_names; do
++ linklib="$l"
++ done
+ fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -9611,7 +10202,7 @@
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
-@@ -9630,9 +10221,9 @@
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -10208,8 +10799,9 @@
- need_version=no
- need_lib_prefix=no
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+@@ -5598,9 +6481,9 @@ func_mode_link ()
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+- dlprefiles="$dlprefiles $lib $dependency_libs"
++ func_append dlprefiles " $lib $dependency_libs"
+ else
+- newdlfiles="$newdlfiles $lib"
++ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+@@ -5622,14 +6505,14 @@ func_mode_link ()
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+- dir="$libdir"
+- absdir="$libdir"
++ dir="$lt_sysroot$libdir"
++ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+@@ -5637,12 +6520,12 @@ func_mode_link ()
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+- notinst_path="$notinst_path $abs_ladir"
++ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+- notinst_path="$notinst_path $abs_ladir"
++ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+@@ -5653,20 +6536,46 @@ func_mode_link ()
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+- # Prefer using a static library (so that no silly _DYNAMIC symbols
+- # are required to link).
+- if test -n "$old_library"; then
+- newdlprefiles="$newdlprefiles $dir/$old_library"
+- # Keep a list of preopened convenience libraries to check
+- # that they are being used correctly in the link pass.
+- test -z "$libdir" && \
+- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+- # Otherwise, use the dlname, so that lt_dlopen finds it.
+- elif test -n "$dlname"; then
+- newdlprefiles="$newdlprefiles $dir/$dlname"
+- else
+- newdlprefiles="$newdlprefiles $dir/$linklib"
+- fi
++ case "$host" in
++ # special handling for platforms with PE-DLLs.
++ *cygwin* | *mingw* | *cegcc* )
++ # Linker will automatically link against shared library if both
++ # static and shared are present. Therefore, ensure we extract
++ # symbols from the import library if a shared library is present
++ # (otherwise, the dlopen module name will be incorrect). We do
++ # this by putting the import library name into $newdlprefiles.
++ # We recover the dlopen module name by 'saving' the la file
++ # name in a special purpose variable, and (later) extracting the
++ # dlname from the la file.
++ if test -n "$dlname"; then
++ func_tr_sh "$dir/$linklib"
++ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
++ func_append newdlprefiles " $dir/$linklib"
++ else
++ func_append newdlprefiles " $dir/$old_library"
++ # Keep a list of preopened convenience libraries to check
++ # that they are being used correctly in the link pass.
++ test -z "$libdir" && \
++ func_append dlpreconveniencelibs " $dir/$old_library"
++ fi
++ ;;
++ * )
++ # Prefer using a static library (so that no silly _DYNAMIC symbols
++ # are required to link).
++ if test -n "$old_library"; then
++ func_append newdlprefiles " $dir/$old_library"
++ # Keep a list of preopened convenience libraries to check
++ # that they are being used correctly in the link pass.
++ test -z "$libdir" && \
++ func_append dlpreconveniencelibs " $dir/$old_library"
++ # Otherwise, use the dlname, so that lt_dlopen finds it.
++ elif test -n "$dlname"; then
++ func_append newdlprefiles " $dir/$dlname"
++ else
++ func_append newdlprefiles " $dir/$linklib"
++ fi
++ ;;
++ esac
+ fi # $pass = dlpreopen
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -10242,13 +10834,71 @@
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
-+ ;;
-+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
-+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
-+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
+ if test -z "$libdir"; then
+@@ -5684,7 +6593,7 @@ func_mode_link ()
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -10340,7 +10990,7 @@
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-@@ -11180,10 +11830,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
+ if test "$linkmode" = prog && test "$pass" != link; then
+- newlib_search_path="$newlib_search_path $ladir"
++ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+@@ -5697,7 +6606,8 @@ func_mode_link ()
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+- newlib_search_path="$newlib_search_path $func_stripname_result"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+@@ -5708,12 +6618,12 @@ func_mode_link ()
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+- if $opt_duplicate_deps ; then
++ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+- tmp_libs="$tmp_libs $deplib"
++ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+@@ -5728,7 +6638,7 @@ func_mode_link ()
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+- *) temp_rpath="$temp_rpath$absdir:" ;;
++ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+@@ -5740,7 +6650,7 @@ func_mode_link ()
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+- *) compile_rpath="$compile_rpath $absdir"
++ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+@@ -5749,7 +6659,7 @@ func_mode_link ()
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir"
++ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+@@ -5774,12 +6684,12 @@ func_mode_link ()
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+- notinst_deplibs="$notinst_deplibs $lib"
++ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+- notinst_deplibs="$notinst_deplibs $lib"
++ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+@@ -5814,7 +6724,7 @@ func_mode_link ()
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+- *) compile_rpath="$compile_rpath $absdir"
++ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+@@ -5823,7 +6733,7 @@ func_mode_link ()
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir"
++ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+@@ -5835,7 +6745,7 @@ func_mode_link ()
+ shift
+ realname="$1"
+ shift
+- eval "libname=\"$libname_spec\""
++ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+@@ -5848,7 +6758,7 @@ func_mode_link ()
+ versuffix="-$major"
+ ;;
+ esac
+- eval "soname=\"$soname_spec\""
++ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+@@ -5877,7 +6787,7 @@ func_mode_link ()
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+- if test "$linkmode" = prog || test "$mode" != relink; then
++ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -5933,7 +6843,7 @@ func_mode_link ()
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+- add_dir="$add_dir -L$inst_prefix_dir$libdir"
++ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -5955,7 +6865,7 @@ func_mode_link ()
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
++ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+@@ -5969,13 +6879,13 @@ func_mode_link ()
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+- if test "$linkmode" = prog || test "$mode" = relink; then
++ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -5989,7 +6899,7 @@ func_mode_link ()
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+@@ -6001,12 +6911,12 @@ func_mode_link ()
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+- add_dir="-L$libdir"
++ add_dir="-L$lt_sysroot$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+- add_dir="$add_dir -L$inst_prefix_dir$libdir"
++ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+@@ -6083,27 +6993,33 @@ func_mode_link ()
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+- *) xrpath="$xrpath $temp_xrpath";;
++ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+- *) temp_deplibs="$temp_deplibs $libdir";;
++ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11286,10 +11936,10 @@
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
+- newlib_search_path="$newlib_search_path $absdir"
++ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+- if $opt_duplicate_deps ; then
++ case $deplib in
++ -L*) func_stripname '-L' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result";;
++ *) func_resolve_sysroot "$deplib" ;;
++ esac
++ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ *" $func_resolve_sysroot_result "*)
++ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+- tmp_libs="$tmp_libs $deplib"
++ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -12831,13 +13481,20 @@
- lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
- lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
- lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
- reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
- reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
- OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
- deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
- file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
- AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
- AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
- STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
- RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
- old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -12852,14 +13509,17 @@
- lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
- objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
- MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
--lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
- lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
- need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
- DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
- NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
- LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -12892,12 +13552,12 @@
- hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
- inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
- link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
--fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
- always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
- export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
- exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
- include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
- prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
- file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
- variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
- need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -12952,8 +13612,13 @@
- OBJDUMP \
- deplibs_check_method \
- file_magic_cmd \
-+file_magic_glob \
-+want_nocaseglob \
-+DLLTOOL \
-+sharedlib_from_linklib_cmd \
- AR \
- AR_FLAGS \
-+archiver_list_spec \
- STRIP \
- RANLIB \
- CC \
-@@ -12963,12 +13628,14 @@
- lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-+nm_file_list_spec \
- lt_prog_compiler_no_builtin_flag \
--lt_prog_compiler_wl \
- lt_prog_compiler_pic \
-+lt_prog_compiler_wl \
- lt_prog_compiler_static \
- lt_cv_prog_compiler_c_o \
- need_locks \
-+MANIFEST_TOOL \
- DSYMUTIL \
- NMEDIT \
- LIPO \
-@@ -12984,7 +13651,6 @@
- hardcode_libdir_flag_spec \
- hardcode_libdir_flag_spec_ld \
- hardcode_libdir_separator \
--fix_srcfile_path \
- exclude_expsyms \
- include_expsyms \
- file_list_spec \
-@@ -13020,6 +13686,7 @@
- module_expsym_cmds \
- export_symbols_cmds \
- prelink_cmds \
-+postlink_cmds \
- postinstall_cmds \
- postuninstall_cmds \
- finish_cmds \
-@@ -13776,7 +14443,8 @@
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
- #
- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
--# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-+# Inc.
- # Written by Gordon Matzigkeit, 1996
- #
- # This file is part of GNU Libtool.
-@@ -13879,19 +14547,42 @@
- # turn newlines into spaces.
- NL2SP=$lt_lt_NL2SP
+ if test "$link_all_deplibs" != no; then
+@@ -6113,8 +7029,10 @@ func_mode_link ()
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
++ func_resolve_sysroot "$deplib"
++ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+- dir="$func_dirname_result"
++ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+@@ -6130,7 +7048,7 @@ func_mode_link ()
+ case $host in
+ *-*-darwin*)
+ depdepl=
+- deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+@@ -6141,8 +7059,8 @@ func_mode_link ()
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
++ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+@@ -6152,7 +7070,7 @@ func_mode_link ()
+ ;;
+ esac
+ else
+- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+@@ -6192,7 +7110,7 @@ func_mode_link ()
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+- *) lib_search_path="$lib_search_path $dir" ;;
++ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+@@ -6205,7 +7123,7 @@ func_mode_link ()
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+- eval tmp_libs=\$$var
++ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+@@ -6250,13 +7168,13 @@ func_mode_link ()
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+- *) tmp_libs="$tmp_libs $deplib" ;;
++ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+- *) tmp_libs="$tmp_libs $deplib" ;;
++ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+- eval $var=\$tmp_libs
++ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+@@ -6269,7 +7187,7 @@ func_mode_link ()
+ ;;
+ esac
+ if test -n "$i" ; then
+- tmp_libs="$tmp_libs $i"
++ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+@@ -6310,7 +7228,7 @@ func_mode_link ()
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+- objs="$objs$old_deplibs"
++ func_append objs "$old_deplibs"
+ ;;
-+# convert \$build file names to \$host format.
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+
-+# convert \$build files to toolchain format.
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+
- # An object symbol dumper.
- OBJDUMP=$lt_OBJDUMP
+ lib)
+@@ -6319,8 +7237,8 @@ func_mode_link ()
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+- eval "shared_ext=\"$shrext_cmds\""
+- eval "libname=\"$libname_spec\""
++ eval shared_ext=\"$shrext_cmds\"
++ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+@@ -6330,8 +7248,8 @@ func_mode_link ()
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+- eval "shared_ext=\"$shrext_cmds\""
+- eval "libname=\"$libname_spec\""
++ eval shared_ext=\"$shrext_cmds\"
++ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+@@ -6346,7 +7264,7 @@ func_mode_link ()
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+- libobjs="$libobjs $objs"
++ func_append libobjs " $objs"
+ fi
+ fi
- # Method to check whether dependent libraries are shared objects.
- deplibs_check_method=$lt_deplibs_check_method
+@@ -6544,7 +7462,7 @@ func_mode_link ()
+ done
--# Command to use when deplibs_check_method == "file_magic".
-+# Command to use when deplibs_check_method = "file_magic".
- file_magic_cmd=$lt_file_magic_cmd
+ # Make executables depend on our current version.
+- verstring="$verstring:${current}.0"
++ func_append verstring ":${current}.0"
+ ;;
-+# How to find potential files when deplibs_check_method = "file_magic".
-+file_magic_glob=$lt_file_magic_glob
-+
-+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-+want_nocaseglob=$lt_want_nocaseglob
-+
-+# DLL creation program.
-+DLLTOOL=$lt_DLLTOOL
-+
-+# Command to associate shared and link libraries.
-+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
-+
- # The archiver.
- AR=$lt_AR
-+
-+# Flags to create an archive.
- AR_FLAGS=$lt_AR_FLAGS
+ qnx)
+@@ -6612,10 +7530,10 @@ func_mode_link ()
+ fi
-+# How to feed a file listing to the archiver.
-+archiver_list_spec=$lt_archiver_list_spec
-+
- # A symbol stripping program.
- STRIP=$lt_STRIP
+ func_generate_dlsyms "$libname" "$libname" "yes"
+- libobjs="$libobjs $symfileobj"
++ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
-@@ -13921,6 +14612,12 @@
- # Transform the output of nm in a C name address pair when lib prefix is needed.
- global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+- if test "$mode" != relink; then
++ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+@@ -6631,7 +7549,7 @@ func_mode_link ()
+ continue
+ fi
+ fi
+- removelist="$removelist $p"
++ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+@@ -6642,7 +7560,7 @@ func_mode_link ()
-+# Specify filename containing input files for \$NM.
-+nm_file_list_spec=$lt_nm_file_list_spec
-+
-+# The root where to search for dependent libraries,and in which our libraries should be installed.
-+lt_sysroot=$lt_sysroot
-+
- # The name of the directory that contains temporary libtool files.
- objdir=$objdir
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+- oldlibs="$oldlibs $output_objdir/$libname.$libext"
++ func_append oldlibs " $output_objdir/$libname.$libext"
-@@ -13930,6 +14627,9 @@
- # Must we lock files when doing compilation?
- need_locks=$lt_need_locks
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+@@ -6659,10 +7577,11 @@ func_mode_link ()
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+- temp_xrpath="$temp_xrpath -R$libdir"
++ func_replace_sysroot "$libdir"
++ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir" ;;
++ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+@@ -6676,7 +7595,7 @@ func_mode_link ()
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+- *) dlfiles="$dlfiles $lib" ;;
++ *) func_append dlfiles " $lib" ;;
+ esac
+ done
-+# Manifest tool.
-+MANIFEST_TOOL=$lt_MANIFEST_TOOL
-+
- # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
- DSYMUTIL=$lt_DSYMUTIL
+@@ -6686,7 +7605,7 @@ func_mode_link ()
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+- *) dlprefiles="$dlprefiles $lib" ;;
++ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+@@ -6698,7 +7617,7 @@ func_mode_link ()
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+- deplibs="$deplibs System.ltframework"
++ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+@@ -6715,7 +7634,7 @@ func_mode_link ()
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+- deplibs="$deplibs -lc"
++ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+@@ -6764,18 +7683,18 @@ EOF
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+- eval "libname=\"$libname_spec\""
+- eval "deplib_matches=\"$library_names_spec\""
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+@@ -6789,7 +7708,7 @@ EOF
+ fi
+ ;;
+ *)
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+@@ -6807,18 +7726,18 @@ EOF
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+- eval "libname=\"$libname_spec\""
+- eval "deplib_matches=\"$library_names_spec\""
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+@@ -6840,7 +7759,7 @@ EOF
+ fi
+ ;;
+ *)
+- newdeplibs="$newdeplibs $i"
++ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+@@ -6857,15 +7776,27 @@ EOF
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+- eval "libname=\"$libname_spec\""
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ if test -n "$file_magic_glob"; then
++ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
++ else
++ libnameglob=$libname
++ fi
++ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ if test "$want_nocaseglob" = yes; then
++ shopt -s nocaseglob
++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++ $nocaseglob
++ else
++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+@@ -6885,10 +7816,10 @@ EOF
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+- if eval "$file_magic_cmd \"\$potlib\"" 2>/dev/null |
++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+@@ -6913,7 +7844,7 @@ EOF
+ ;;
+ *)
+ # Add a -L argument.
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+@@ -6929,20 +7860,20 @@ EOF
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+- eval "libname=\"$libname_spec\""
++ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+@@ -6967,7 +7898,7 @@ EOF
+ ;;
+ *)
+ # Add a -L argument.
+- newdeplibs="$newdeplibs $a_deplib"
++ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+@@ -7071,7 +8002,7 @@ EOF
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+- new_libs="$new_libs -L$path/$objdir" ;;
++ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+@@ -7081,10 +8012,10 @@ EOF
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+- *) new_libs="$new_libs $deplib" ;;
++ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+- *) new_libs="$new_libs $deplib" ;;
++ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+@@ -7101,10 +8032,12 @@ EOF
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+- test "$mode" != relink && rpath="$compile_rpath$rpath"
++ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
++ func_replace_sysroot "$libdir"
++ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+@@ -7113,18 +8046,18 @@ EOF
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+- eval "flag=\"$hardcode_libdir_flag_spec\""
+- dep_rpath="$dep_rpath $flag"
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+- *) perm_rpath="$perm_rpath $libdir" ;;
++ *) func_apped perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+@@ -7133,40 +8066,38 @@ EOF
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+- eval "dep_rpath=\"$hardcode_libdir_flag_spec_ld\""
++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+- eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
++ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+- rpath="$rpath$dir:"
++ func_append rpath "$dir:"
+ done
+- eval $runpath_var=\$rpath\$$runpath_var
+- export $runpath_var
++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
-@@ -14044,12 +14744,12 @@
- # Compiler flag to turn off builtin functions.
- no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+ shlibpath="$finalize_shlibpath"
+- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+- eval $shlibpath_var=\$shlibpath\$$shlibpath_var
+- export $shlibpath_var
++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
--# How to pass a linker flag through the compiler.
--wl=$lt_lt_prog_compiler_wl
--
- # Additional compiler flags for building library objects.
- pic_flag=$lt_lt_prog_compiler_pic
+ # Get the real and link names of the library.
+- eval "shared_ext=\"$shrext_cmds\""
+- eval "library_names=\"$library_names_spec\""
++ eval shared_ext=\"$shrext_cmds\"
++ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl
-+
- # Compiler flag to prevent dynamic linking.
- link_static_flag=$lt_lt_prog_compiler_static
+ if test -n "$soname_spec"; then
+- eval "soname=\"$soname_spec\""
++ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+@@ -7178,7 +8109,7 @@ EOF
+ linknames=
+ for link
+ do
+- linknames="$linknames $link"
++ func_append linknames " $link"
+ done
-@@ -14136,9 +14836,6 @@
- # Whether libtool must link a program against all its dependency libraries.
- link_all_deplibs=$link_all_deplibs
+ # Use standard objects if they are pic
+@@ -7189,7 +8120,7 @@ EOF
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+- delfiles="$delfiles $export_symbols"
++ func_append delfiles " $export_symbols"
+ fi
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path=$lt_fix_srcfile_path
--
- # Set to "yes" if exported symbols are required.
- always_export_symbols=$always_export_symbols
+ orig_export_symbols=
+@@ -7220,13 +8151,45 @@ EOF
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+- for cmd in $cmds; do
++ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+- eval "cmd=\"$cmd\""
+- func_len " $cmd"
+- len=$func_len_result
+- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ # Take the normal branch if the nm_file_list_spec branch
++ # doesn't work or if tool conversion is not needed.
++ case $nm_file_list_spec~$to_tool_file_cmd in
++ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
++ try_normal_branch=yes
++ eval cmd=\"$cmd1\"
++ func_len " $cmd"
++ len=$func_len_result
++ ;;
++ *)
++ try_normal_branch=no
++ ;;
++ esac
++ if test "$try_normal_branch" = yes \
++ && { test "$len" -lt "$max_cmd_len" \
++ || test "$max_cmd_len" -le -1; }
++ then
++ func_show_eval "$cmd" 'exit $?'
++ skipped_export=false
++ elif test -n "$nm_file_list_spec"; then
++ func_basename "$output"
++ output_la=$func_basename_result
++ save_libobjs=$libobjs
++ save_output=$output
++ output=${output_objdir}/${output_la}.nm
++ func_to_tool_file "$output"
++ libobjs=$nm_file_list_spec$func_to_tool_file_result
++ func_append delfiles " $output"
++ func_verbose "creating $NM input file list: $output"
++ for obj in $save_libobjs; do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result"
++ done > "$output"
++ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
++ output=$save_output
++ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+@@ -7248,7 +8211,7 @@ EOF
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"
++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
-@@ -14154,6 +14851,9 @@
- # Commands necessary for linking programs (against libraries) with templates.
- prelink_cmds=$lt_prelink_cmds
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+@@ -7260,7 +8223,7 @@ EOF
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
++ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+@@ -7270,7 +8233,7 @@ EOF
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+- tmp_deplibs="$tmp_deplibs $test_deplib"
++ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+@@ -7286,43 +8249,43 @@ EOF
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\""
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
-+# Commands necessary for finishing linking programs.
-+postlink_cmds=$lt_postlink_cmds
-+
- # Specify filename containing input files.
- file_list_spec=$lt_file_list_spec
+ func_extract_archives $gentop $convenience
+- libobjs="$libobjs $func_extract_archives_result"
++ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
-@@ -14186,210 +14886,169 @@
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
-- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
--
-- case $xsi_shell in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result="${1##*/}"
--}
--
--# func_dirname_and_basename file append nondir_replacement
--# perform func_basename and func_dirname in a single function
--# call:
--# dirname: Compute the dirname of FILE. If nonempty,
--# add APPEND to the result, otherwise set result
--# to NONDIR_REPLACEMENT.
--# value returned in "$func_dirname_result"
--# basename: Compute filename of FILE.
--# value retuned in "$func_basename_result"
--# Implementation must be kept synchronized with func_dirname
--# and func_basename. For efficiency, we do not delegate to
--# those functions but instead duplicate the functionality here.
--func_dirname_and_basename ()
--{
-- case ${1} in
-- */*) func_dirname_result="${1%/*}${2}" ;;
-- * ) func_dirname_result="${3}" ;;
-- esac
-- func_basename_result="${1##*/}"
--}
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--func_stripname ()
--{
-- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-- # positional parameters, so assign one to ordinary parameter first.
-- func_stripname_result=${3}
-- func_stripname_result=${func_stripname_result#"${1}"}
-- func_stripname_result=${func_stripname_result%"${2}"}
--}
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=${1%%=*}
-- func_opt_split_arg=${1#*=}
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- case ${1} in
-- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-- *) func_lo2o_result=${1} ;;
-- esac
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=${1%.*}.lo
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=$(( $* ))
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=${#1}
--}
--
--_LT_EOF
-- ;;
-- *) # Bourne compatible functions.
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_dirname file append nondir_replacement
--# Compute the dirname of FILE. If nonempty, add APPEND to the result,
--# otherwise set result to NONDIR_REPLACEMENT.
--func_dirname ()
--{
-- # Extract subdirectory from the argument.
-- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-- if test "X$func_dirname_result" = "X${1}"; then
-- func_dirname_result="${3}"
-- else
-- func_dirname_result="$func_dirname_result${2}"
-- fi
--}
--
--# func_basename file
--func_basename ()
--{
-- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
--}
--
--
--# func_stripname prefix suffix name
--# strip PREFIX and SUFFIX off of NAME.
--# PREFIX and SUFFIX must not contain globbing or regex special
--# characters, hashes, percent signs, but SUFFIX may contain a leading
--# dot (in which case that matches only a dot).
--# func_strip_suffix prefix name
--func_stripname ()
--{
-- case ${2} in
-- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-- esac
--}
--
--# sed scripts:
--my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
--my_sed_long_arg='1s/^-[^=]*=//'
--
--# func_opt_split
--func_opt_split ()
--{
-- func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-- func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
--}
--
--# func_lo2o object
--func_lo2o ()
--{
-- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
--}
--
--# func_xform libobj-or-source
--func_xform ()
--{
-- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
--}
--
--# func_arith arithmetic-term...
--func_arith ()
--{
-- func_arith_result=`expr "$@"`
--}
--
--# func_len string
--# STRING may not start with a hyphen.
--func_len ()
--{
-- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
--}
--
--_LT_EOF
--esac
--
--case $lt_shell_append in
-- yes)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1+=\$2"
--}
--_LT_EOF
-- ;;
-- *)
-- cat << \_LT_EOF >> "$cfgfile"
--
--# func_append var value
--# Append VALUE to the end of shell variable VAR.
--func_append ()
--{
-- eval "$1=\$$1\$2"
--}
--
--_LT_EOF
-- ;;
-- esac
-+ sed '$q' "$ltmain" >> "$cfgfile" \
-+ || (rm -f "$cfgfile"; exit 1)
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+- eval "flag=\"$thread_safe_flag_spec\""
+- linker_flags="$linker_flags $flag"
++ eval flag=\"$thread_safe_flag_spec\"
++ func_append linker_flags " $flag"
+ fi
-+ if test x"$xsi_shell" = xyes; then
-+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-+func_dirname ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
-+func_basename ()\
-+{\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-+func_dirname_and_basename ()\
-+{\
-+\ case ${1} in\
-+\ */*) func_dirname_result="${1%/*}${2}" ;;\
-+\ * ) func_dirname_result="${3}" ;;\
-+\ esac\
-+\ func_basename_result="${1##*/}"\
-+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-+func_stripname ()\
-+{\
-+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-+\ # positional parameters, so assign one to ordinary parameter first.\
-+\ func_stripname_result=${3}\
-+\ func_stripname_result=${func_stripname_result#"${1}"}\
-+\ func_stripname_result=${func_stripname_result%"${2}"}\
-+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-+func_split_long_opt ()\
-+{\
-+\ func_split_long_opt_name=${1%%=*}\
-+\ func_split_long_opt_arg=${1#*=}\
-+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-+func_split_short_opt ()\
-+{\
-+\ func_split_short_opt_arg=${1#??}\
-+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-+func_lo2o ()\
-+{\
-+\ case ${1} in\
-+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-+\ *) func_lo2o_result=${1} ;;\
-+\ esac\
-+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
-+func_xform ()\
-+{\
-+ func_xform_result=${1%.*}.lo\
-+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
-+func_arith ()\
-+{\
-+ func_arith_result=$(( $* ))\
-+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+
-+ sed -e '/^func_len ()$/,/^} # func_len /c\
-+func_len ()\
-+{\
-+ func_len_result=${#1}\
-+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
-+
-+fi
+ # Make a backup of the uninstalled library when relinking
+- if test "$mode" = relink; then
+- $opt_dry_run || (cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U) || exit $?
++ if test "$opt_mode" = relink; then
++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+- eval "test_cmds=\"$module_expsym_cmds\""
++ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+- eval "test_cmds=\"$module_cmds\""
++ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+- eval "test_cmds=\"$archive_expsym_cmds\""
++ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+- eval "test_cmds=\"$archive_cmds\""
++ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+@@ -7366,10 +8329,13 @@ EOF
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+- $ECHO "$obj" >> $output
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+- delfiles="$delfiles $output"
++ func_append delfiles " $output"
++ func_to_tool_file "$output"
++ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+@@ -7383,15 +8349,17 @@ EOF
+ fi
+ for obj
+ do
+- $ECHO "$obj" >> $output
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result" >> $output
+ done
+- delfiles="$delfiles $output"
+- output=$firstobj\"$file_list_spec$output\"
++ func_append delfiles " $output"
++ func_to_tool_file "$output"
++ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+- eval "test_cmds=\"$reload_cmds\""
++ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+@@ -7411,12 +8379,12 @@ EOF
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+- eval "concat_cmds=\"$reload_cmds\""
++ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+- eval "concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\""
++ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+@@ -7433,11 +8401,11 @@ EOF
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+- eval "concat_cmds=\"\${concat_cmds}$reload_cmds\""
++ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+- eval "concat_cmds=\"\${concat_cmds}~\$RM $last_robj\""
++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+- delfiles="$delfiles $output"
++ func_append delfiles " $output"
+
+ else
+ output=
+@@ -7450,9 +8418,9 @@ EOF
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+- eval "concat_cmds=\"\$concat_cmds$export_symbols_cmds\""
++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+- eval "concat_cmds=\"\$concat_cmds~\$RM $last_robj\""
++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+@@ -7471,7 +8439,7 @@ EOF
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+- if test "$mode" = relink; then
++ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+@@ -7492,7 +8460,7 @@ EOF
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+- $opt_dry_run || $ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"
++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+@@ -7504,7 +8472,7 @@ EOF
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
++ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+@@ -7515,7 +8483,7 @@ EOF
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+- eval "libobjs=\"\$libobjs $whole_archive_flag_spec\""
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+@@ -7539,23 +8507,23 @@ EOF
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+- eval "cmds=\"\$cmds~\$RM $delfiles\""
++ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+- libobjs="$libobjs $func_extract_archives_result"
++ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+- eval "cmd=\"$cmd\""
++ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+@@ -7564,7 +8532,7 @@ EOF
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+- if test "$mode" = relink; then
++ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+@@ -7576,8 +8544,8 @@ EOF
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+- if test "$mode" = relink; then
+- $opt_dry_run || (cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname) || exit $?
++ if test "$opt_mode" = relink; then
++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+@@ -7656,17 +8624,20 @@ EOF
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+- eval "tmp_whole_archive_flags=\"$whole_archive_flag_spec\""
++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
++ # If we're not building shared, we need to use non_pic_objs
++ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
-+if test x"$lt_shell_append" = xyes; then
-+ sed -e '/^func_append ()$/,/^} # func_append /c\
-+func_append ()\
-+{\
-+ eval "${1}+=\\${2}"\
-+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+@@ -7690,7 +8661,7 @@ EOF
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+- # $opt_dry_run || echo timestamp > $libobj || exit $?
++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+@@ -7740,8 +8711,8 @@ EOF
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+- compile_command="$compile_command ${wl}-bind_at_load"
+- finalize_command="$finalize_command ${wl}-bind_at_load"
++ func_append compile_command " ${wl}-bind_at_load"
++ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+@@ -7761,7 +8732,7 @@ EOF
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+- new_libs="$new_libs -L$path/$objdir" ;;
++ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+@@ -7771,17 +8742,17 @@ EOF
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+- *) new_libs="$new_libs $deplib" ;;
++ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+- *) new_libs="$new_libs $deplib" ;;
++ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+- compile_command="$compile_command $compile_deplibs"
+- finalize_command="$finalize_command $finalize_deplibs"
++ func_append compile_command " $compile_deplibs"
++ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+@@ -7789,7 +8760,7 @@ EOF
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+- *) finalize_rpath="$finalize_rpath $libdir" ;;
++ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+@@ -7808,18 +8779,18 @@ EOF
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+- eval "flag=\"$hardcode_libdir_flag_spec\""
+- rpath="$rpath $flag"
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+- *) perm_rpath="$perm_rpath $libdir" ;;
++ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+@@ -7828,12 +8799,12 @@ EOF
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+- *) dllsearchpath="$dllsearchpath:$libdir";;
++ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+- *) dllsearchpath="$dllsearchpath:$testbindir";;
++ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+@@ -7842,7 +8813,7 @@ EOF
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+- eval "rpath=\" $hardcode_libdir_flag_spec\""
++ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+@@ -7859,18 +8830,18 @@ EOF
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+- eval "flag=\"$hardcode_libdir_flag_spec\""
+- rpath="$rpath $flag"
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
++ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+@@ -7878,7 +8849,7 @@ EOF
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+- eval "rpath=\" $hardcode_libdir_flag_spec\""
++ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+@@ -7921,6 +8892,12 @@ EOF
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+@@ -7943,7 +8920,7 @@ EOF
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+- rpath="$rpath$dir:"
++ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+@@ -7951,7 +8928,7 @@ EOF
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+- rpath="$rpath$dir:"
++ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+@@ -7966,6 +8943,13 @@ EOF
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
-+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-+func_append_quoted ()\
-+{\
-+\ func_quote_for_eval "${2}"\
-+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+test 0 -eq $? || _lt_function_replace_fail=:
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+@@ -7999,6 +8983,12 @@ EOF
+
+ func_show_eval "$link_command" 'exit $?'
+
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output_objdir/$outputname"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
+
-+ # Save a `func_append' function call where possible by direct use of '+='
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+else
-+ # Save a `func_append' function call even when '+=' is not available
-+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-+ && mv -f "$cfgfile.tmp" "$cfgfile" \
-+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-+ test 0 -eq $? || _lt_function_replace_fail=:
-+fi
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+@@ -8096,7 +9086,7 @@ EOF
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+- oldobjs="$oldobjs $symfileobj"
++ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+@@ -8104,10 +9094,10 @@ EOF
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+- oldobjs="$oldobjs $func_extract_archives_result"
++ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+@@ -8118,10 +9108,10 @@ EOF
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+- oldobjs="$oldobjs $func_extract_archives_result"
++ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+@@ -8139,7 +9129,7 @@ EOF
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+- generated="$generated $gentop"
++ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+@@ -8163,18 +9153,28 @@ EOF
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+- oldobjs="$oldobjs $gentop/$newobj"
++ func_append oldobjs " $gentop/$newobj"
+ ;;
+- *) oldobjs="$oldobjs $obj" ;;
++ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+- eval "cmds=\"$old_archive_cmds\""
++ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
++ elif test -n "$archiver_list_spec"; then
++ func_verbose "using command file archive linking..."
++ for obj in $oldobjs
++ do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result"
++ done > $output_objdir/$libname.libcmd
++ func_to_tool_file "$output_objdir/$libname.libcmd"
++ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
++ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+@@ -8189,7 +9189,7 @@ EOF
+ do
+ last_oldobj=$obj
+ done
+- eval "test_cmds=\"$old_archive_cmds\""
++ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+@@ -8208,7 +9208,7 @@ EOF
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+- eval "concat_cmds=\"\${concat_cmds}$old_archive_cmds\""
++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+@@ -8216,9 +9216,9 @@ EOF
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+- eval "cmds=\"\$concat_cmds\""
++ eval cmds=\"\$concat_cmds\"
+ else
+- eval "cmds=\"\$concat_cmds~\$old_archive_cmds\""
++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+@@ -8268,12 +9268,23 @@ EOF
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ func_resolve_sysroot "$deplib"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+- newdependency_libs="$newdependency_libs $libdir/$name"
++ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
++ ;;
++ -L*)
++ func_stripname -L '' "$deplib"
++ func_replace_sysroot "$func_stripname_result"
++ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+- *) newdependency_libs="$newdependency_libs $deplib" ;;
++ -R*)
++ func_stripname -R '' "$deplib"
++ func_replace_sysroot "$func_stripname_result"
++ func_append newdependency_libs " -R$func_replace_sysroot_result"
++ ;;
++ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+@@ -8284,12 +9295,14 @@ EOF
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ func_resolve_sysroot "$lib"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+
-+if test x"$_lt_function_replace_fail" = x":"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-+fi
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+- newdlfiles="$newdlfiles $libdir/$name"
++ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+- *) newdlfiles="$newdlfiles $lib" ;;
++ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+@@ -8303,10 +9316,11 @@ EOF
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+- libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ func_resolve_sysroot "$lib"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+- newdlprefiles="$newdlprefiles $libdir/$name"
++ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+@@ -8318,7 +9332,7 @@ EOF
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+- newdlfiles="$newdlfiles $abs"
++ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+@@ -8327,7 +9341,7 @@ EOF
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+- newdlprefiles="$newdlprefiles $abs"
++ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+@@ -8412,7 +9426,7 @@ relink_command=\"$relink_command\""
+ exit $EXIT_SUCCESS
+ }
-- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-- || (rm -f "$cfgfile"; exit 1)
+-{ test "$mode" = link || test "$mode" = relink; } &&
++{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
-- mv -f "$cfgfile" "$ofile" ||
-+ mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-Index: binutils-2.24/ld/configure
-===================================================================
---- binutils-2.24.orig/ld/configure 2013-11-04 07:33:39.000000000 -0800
-+++ binutils-2.24/ld/configure 2013-12-15 11:12:06.120451266 -0800
-@@ -654,8 +654,11 @@ OTOOL
- LIPO
- NMEDIT
- DSYMUTIL
-+MANIFEST_TOOL
- RANLIB
-+ac_ct_AR
- AR
-+DLLTOOL
- OBJDUMP
- LN_S
- NM
-@@ -776,6 +779,7 @@ enable_static
- with_pic
- enable_fast_install
- with_gnu_ld
-+with_libtool_sysroot
- enable_libtool_lock
- enable_plugins
- enable_largefile
-@@ -1453,6 +1457,8 @@ Optional Packages:
- --with-pic try to use only PIC/non-PIC objects [default=use
- both]
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
-+ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
-+ (or the compiler's sysroot if not specified).
- --with-lib-path=dir1:dir2... set default LIB_PATH
- --with-sysroot=DIR Search for usr/lib et al within DIR.
- --with-zlib include zlib support (auto/yes/no) default=auto
-@@ -5645,8 +5651,8 @@ esac
+@@ -8432,9 +9446,9 @@ func_mode_uninstall ()
+ for arg
+ do
+ case $arg in
+- -f) RM="$RM $arg"; rmforce=yes ;;
+- -*) RM="$RM $arg" ;;
+- *) files="$files $arg" ;;
++ -f) func_append RM " $arg"; rmforce=yes ;;
++ -*) func_append RM " $arg" ;;
++ *) func_append files " $arg" ;;
+ esac
+ done
+
+@@ -8443,24 +9457,23 @@ func_mode_uninstall ()
+
+ rmdirs=
+
+- origobjdir="$objdir"
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+- objdir="$origobjdir"
++ odir="$objdir"
+ else
+- objdir="$dir/$origobjdir"
++ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+- test "$mode" = uninstall && objdir="$dir"
++ test "$opt_mode" = uninstall && odir="$dir"
+- # Remember objdir for removal later, being careful to avoid duplicates
+- if test "$mode" = clean; then
++ # Remember odir for removal later, being careful to avoid duplicates
++ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+- *" $objdir "*) ;;
+- *) rmdirs="$rmdirs $objdir" ;;
++ *" $odir "*) ;;
++ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+@@ -8486,18 +9499,17 @@ func_mode_uninstall ()
--macro_version='2.2.7a'
--macro_revision='1.3134'
-+macro_version='2.4'
-+macro_revision='1.3293'
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+- rmfiles="$rmfiles $objdir/$n"
++ func_append rmfiles " $odir/$n"
+ done
+- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
++ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+- case "$mode" in
++ case "$opt_mode" in
+ clean)
+- case " $library_names " in
+- # " " in the beginning catches empty $dlname
++ case " $library_names " in
+ *" $dlname "*) ;;
+- *) rmfiles="$rmfiles $objdir/$dlname" ;;
++ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+@@ -8525,19 +9537,19 @@ func_mode_uninstall ()
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+- rmfiles="$rmfiles $dir/$pic_object"
++ func_append rmfiles " $dir/$pic_object"
+ fi
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+- rmfiles="$rmfiles $dir/$non_pic_object"
++ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
-@@ -5686,7 +5692,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
- $as_echo_n "checking how to print strings... " >&6; }
- # Test print first, because it will be a builtin if present.
--if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
- elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-@@ -6372,8 +6378,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-- = c,a/b,, \
-+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-+ = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-@@ -6422,6 +6428,80 @@ esac
+ *)
+- if test "$mode" = clean ; then
++ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+@@ -8547,7 +9559,7 @@ func_mode_uninstall ()
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+- rmfiles="$rmfiles $file"
++ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+@@ -8556,7 +9568,7 @@ func_mode_uninstall ()
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+- rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
++ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+@@ -8564,12 +9576,12 @@ func_mode_uninstall ()
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+- rmfiles="$rmfiles $objdir/lt-$name"
++ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
++ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+@@ -8577,7 +9589,6 @@ func_mode_uninstall ()
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+- objdir="$origobjdir"
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+@@ -8589,16 +9600,16 @@ func_mode_uninstall ()
+ exit $exit_status
+ }
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-+if test "${lt_cv_to_host_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
-+ ;;
-+ esac
-+ ;;
-+ *-*-cygwin* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
-+ ;;
-+ *-*-cygwin* )
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+ * ) # otherwise, assume *nix
-+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
-+ ;;
-+ esac
-+ ;;
-+ * ) # unhandled hosts (and "normal" native builds)
-+ lt_cv_to_host_file_cmd=func_convert_file_noop
-+ ;;
-+esac
-+
-+fi
-+
-+to_host_file_cmd=$lt_cv_to_host_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-+if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ #assume ordinary cross tools, or native build.
-+lt_cv_to_tool_file_cmd=func_convert_file_noop
-+case $host in
-+ *-*-mingw* )
-+ case $build in
-+ *-*-mingw* ) # actually msys
-+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
-+ ;;
-+ esac
-+ ;;
-+esac
-+
-+fi
-+
-+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
-+
-+
-+
-+
-+
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
- $as_echo_n "checking for $LD option to reload object files... " >&6; }
- if test "${lt_cv_ld_reload_flag+set}" = set; then :
-@@ -6438,6 +6518,11 @@ case $reload_flag in
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-+ cygwin* | mingw* | pw32* | cegcc*)
-+ if test "$GCC" != yes; then
-+ reload_cmds=false
-+ fi
-+ ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-@@ -6606,7 +6691,8 @@ mingw* | pw32*)
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
-- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-+ # Keep this pattern in sync with the one in func_win32_libid.
-+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-@@ -6760,6 +6846,21 @@ esac
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
- $as_echo "$lt_cv_deplibs_check_method" >&6; }
-+
-+file_magic_glob=
-+want_nocaseglob=no
-+if test "$build" = "$host"; then
-+ case $host_os in
-+ mingw* | pw32*)
-+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
-+ want_nocaseglob=yes
-+ else
-+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
-+ fi
-+ ;;
-+ esac
-+fi
-+
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -6775,9 +6876,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+-{ test "$mode" = uninstall || test "$mode" = clean; } &&
++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+-test -z "$mode" && {
++test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+ }
+
+ test -z "$exec_cmd" && \
+- func_fatal_help "invalid operation mode \`$mode'"
++ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+ if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+diff --git a/ltoptions.m4 b/ltoptions.m4
+index 5ef12ce..17cfd51 100644
+--- a/ltoptions.m4
++++ b/ltoptions.m4
+@@ -8,7 +8,7 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+-# serial 6 ltoptions.m4
++# serial 7 ltoptions.m4
+ # This is to help aclocal find these macros, as it can't see m4_define.
+ AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+diff --git a/ltversion.m4 b/ltversion.m4
+index bf87f77..9c7b5d4 100644
+--- a/ltversion.m4
++++ b/ltversion.m4
+@@ -7,17 +7,17 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$DLLTOOL"; then
-+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+DLLTOOL=$ac_cv_prog_DLLTOOL
-+if test -n "$DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-+$as_echo "$DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_prog_DLLTOOL"; then
-+ ac_ct_DLLTOOL=$DLLTOOL
-+ # Extract the first word of "dlltool", so it can be a program name with args.
-+set dummy dlltool; ac_word=$2
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ if test -n "$ac_ct_DLLTOOL"; then
-+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+ done
-+IFS=$as_save_IFS
-+
-+fi
-+fi
-+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-+if test -n "$ac_ct_DLLTOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-+$as_echo "$ac_ct_DLLTOOL" >&6; }
-+else
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_ct_DLLTOOL" = x; then
-+ DLLTOOL="false"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ DLLTOOL=$ac_ct_DLLTOOL
-+ fi
-+else
-+ DLLTOOL="$ac_cv_prog_DLLTOOL"
-+fi
-+
-+test -z "$DLLTOOL" && DLLTOOL=dlltool
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-+if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_sharedlib_from_linklib_cmd='unknown'
-+
-+case $host_os in
-+cygwin* | mingw* | pw32* | cegcc*)
-+ # two different shell functions defined in ltmain.sh
-+ # decide which to use based on capabilities of $DLLTOOL
-+ case `$DLLTOOL --help 2>&1` in
-+ *--identify-strict*)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
-+ ;;
-+ *)
-+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
-+ ;;
-+ esac
-+ ;;
-+*)
-+ # fallback: assume linklib IS sharedlib
-+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
-+ ;;
-+esac
-+
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-+
-+
-+
-+
-+
-+
-+
- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
--set dummy ${ac_tool_prefix}ar; ac_word=$2
-+ for ac_prog in ar
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_AR+set}" = set; then :
-@@ -6793,7 +7047,7 @@ do
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_AR="${ac_tool_prefix}ar"
-+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6813,11 +7067,15 @@ $as_echo "no" >&6; }
- fi
+-# Generated from ltversion.in.
++# @configure_input@
+-# serial 3134 ltversion.m4
++# serial 3293 ltversion.m4
+ # This file is part of GNU Libtool
-+ test -n "$AR" && break
-+ done
- fi
--if test -z "$ac_cv_prog_AR"; then
-+if test -z "$AR"; then
- ac_ct_AR=$AR
-- # Extract the first word of "ar", so it can be a program name with args.
--set dummy ar; ac_word=$2
-+ for ac_prog in ar
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
-@@ -6833,7 +7091,7 @@ do
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_prog_ac_ct_AR="ar"
-+ ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-@@ -6852,6 +7110,10 @@ else
- $as_echo "no" >&6; }
- fi
+-m4_define([LT_PACKAGE_VERSION], [2.2.7a])
+-m4_define([LT_PACKAGE_REVISION], [1.3134])
++m4_define([LT_PACKAGE_VERSION], [2.4])
++m4_define([LT_PACKAGE_REVISION], [1.3293])
+
+ AC_DEFUN([LTVERSION_VERSION],
+-[macro_version='2.2.7a'
+-macro_revision='1.3134'
++[macro_version='2.4'
++macro_revision='1.3293'
+ _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+ _LT_DECL(, macro_revision, 0)
+ ])
+diff --git a/lt~obsolete.m4 b/lt~obsolete.m4
+index bf92b5e..c573da9 100644
+--- a/lt~obsolete.m4
++++ b/lt~obsolete.m4
+@@ -7,7 +7,7 @@
+ # unlimited permission to copy and/or distribute it, with or without
+ # modifications, as long as this notice is preserved.
+
+-# serial 4 lt~obsolete.m4
++# serial 5 lt~obsolete.m4
+
+ # These exist entirely to fool aclocal when bootstrapping libtool.
+ #
+diff --git a/opcodes/configure b/opcodes/configure
+index c9c04ce..31141d9 100755
+--- a/opcodes/configure
++++ b/opcodes/configure
+@@ -648,6 +648,9 @@ OTOOL
+ LIPO
+ NMEDIT
+ DSYMUTIL
++MANIFEST_TOOL
++ac_ct_AR
++DLLTOOL
+ OBJDUMP
+ LN_S
+ NM
+@@ -760,6 +763,7 @@ enable_static
+ with_pic
+ enable_fast_install
+ with_gnu_ld
++with_libtool_sysroot
+ enable_libtool_lock
+ enable_targets
+ enable_werror
+@@ -1420,6 +1424,8 @@ Optional Packages:
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-libtool-sysroot=DIR Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).
-+
-+ test -n "$ac_ct_AR" && break
-+done
-+
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
-@@ -6863,12 +7125,12 @@ ac_tool_warned=yes ;;
- esac
- AR=$ac_ct_AR
- fi
--else
-- AR="$ac_cv_prog_AR"
- fi
+ Some influential environment variables:
+ CC C compiler command
+@@ -5110,8 +5116,8 @@ esac
--test -z "$AR" && AR=ar
--test -z "$AR_FLAGS" && AR_FLAGS=cru
-+: ${AR=ar}
-+: ${AR_FLAGS=cru}
-+
-+
+-macro_version='2.2.7a'
+-macro_revision='1.3134'
++macro_version='2.4'
++macro_revision='1.3293'
-@@ -6878,6 +7140,62 @@ test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+@@ -5151,7 +5157,7 @@ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+ $as_echo_n "checking how to print strings... " >&6; }
+ # Test print first, because it will be a builtin if present.
+-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+ elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+@@ -5837,8 +5843,8 @@ $as_echo_n "checking whether the shell understands some XSI constructs... " >&6;
+ # Try some XSI features
+ xsi_shell=no
+ ( _lt_dummy="a/b/c"
+- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+- = c,a/b,, \
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+@@ -5887,6 +5893,80 @@ esac
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-+$as_echo_n "checking for archiver @FILE support... " >&6; }
-+if test "${lt_cv_ar_at_file+set}" = set; then :
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
++$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
++if test "${lt_cv_to_host_file_cmd+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ lt_cv_ar_at_file=no
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+if ac_fn_c_try_compile "$LINENO"; then :
-+ echo conftest.$ac_objext > conftest.lst
-+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -eq 0; then
-+ # Ensure the archiver fails upon bogus file names.
-+ rm -f conftest.$ac_objext libconftest.a
-+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
-+ (eval $lt_ar_try) 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-+ test $ac_status = 0; }
-+ if test "$ac_status" -ne 0; then
-+ lt_cv_ar_at_file=@
-+ fi
-+ fi
-+ rm -f conftest.* libconftest.a
-+
-+fi
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
+
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-+$as_echo "$lt_cv_ar_at_file" >&6; }
+
-+if test "x$lt_cv_ar_at_file" = xno; then
-+ archiver_list_spec=
-+else
-+ archiver_list_spec=$lt_cv_ar_at_file
-+fi
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
++$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
-
-
- if test -n "$ac_tool_prefix"; then
-@@ -7214,8 +7532,8 @@ esac
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
- # Transform an extracted symbol line into symbol name and symbol address
--lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
--lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
- # Handle CRLF in mingw tool chain
- opt_cr=
-@@ -7251,6 +7569,7 @@ for ac_symprfx in "" "_"; do
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
-+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-@@ -7292,6 +7611,18 @@ _LT_EOF
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-+/* DATA imports from DLLs on WIN32 con't be const, because runtime
-+ relocations are performed -- see ld's documentation on pseudo-relocs. */
-+# define LT_DLSYM_CONST
-+#elif defined(__osf__)
-+/* This system does not cope well with relocations in const data. */
-+# define LT_DLSYM_CONST
-+#else
-+# define LT_DLSYM_CONST const
-+#endif
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
++if test "${lt_cv_to_tool_file_cmd+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ #assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -7303,7 +7634,7 @@ _LT_EOF
- cat <<_LT_EOF >> conftest.$ac_ext
-
- /* The mapping between symbol names and symbols. */
--const struct {
-+LT_DLSYM_CONST struct {
- const char *name;
- void *address;
- }
-@@ -7329,8 +7660,8 @@ static const void *lt_preloaded_setup() {
- _LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
-- lt_save_LIBS="$LIBS"
-- lt_save_CFLAGS="$CFLAGS"
-+ lt_globsym_save_LIBS=$LIBS
-+ lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-@@ -7340,8 +7671,8 @@ _LT_EOF
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
-- LIBS="$lt_save_LIBS"
-- CFLAGS="$lt_save_CFLAGS"
-+ LIBS=$lt_globsym_save_LIBS
-+ CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
-@@ -7378,6 +7709,19 @@ else
- $as_echo "ok" >&6; }
- fi
-
-+# Response file support.
-+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-+ nm_file_list_spec='@'
-+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
-+ nm_file_list_spec='@'
+fi
+
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
++$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
++
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+ $as_echo_n "checking for $LD option to reload object files... " >&6; }
+ if test "${lt_cv_ld_reload_flag+set}" = set; then :
+@@ -5903,6 +5983,11 @@ case $reload_flag in
+ esac
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+@@ -6071,7 +6156,8 @@ mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+@@ -6225,6 +6311,21 @@ esac
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+ $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
+
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+@@ -6240,9 +6341,162 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown
-@@ -7398,6 +7742,42 @@ fi
-
-
-
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-+$as_echo_n "checking for sysroot... " >&6; }
+
-+# Check whether --with-libtool-sysroot was given.
-+if test "${with_libtool_sysroot+set}" = set; then :
-+ withval=$with_libtool_sysroot;
-+else
-+ with_libtool_sysroot=no
-+fi
+
+
-+lt_sysroot=
-+case ${with_libtool_sysroot} in #(
-+ yes)
-+ if test "$GCC" = yes; then
-+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
-+ fi
-+ ;; #(
-+ /*)
-+ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
-+ ;; #(
-+ no|'')
-+ ;; #(
-+ *)
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
-+$as_echo "${with_libtool_sysroot}" >&6; }
-+ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
-+ ;;
-+esac
+
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
-
- # Check whether --enable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then :
-@@ -7605,6 +7985,123 @@ esac
-
- need_locks="$enable_libtool_lock"
-
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}mt; ac_word=$2
++
++
+ if test -n "$ac_tool_prefix"; then
+- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ar; ac_word=$2
++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ if test -n "$MANIFEST_TOOL"; then
-+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
++ if test -n "$DLLTOOL"; then
++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
@@ -17293,7 +17653,7 @@ Index: binutils-2.24/ld/configure
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
@@ -17303,10 +17663,10 @@ Index: binutils-2.24/ld/configure
+
+fi
+fi
-+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-+if test -n "$MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-+$as_echo "$MANIFEST_TOOL" >&6; }
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
@@ -17314,17 +17674,17 @@ Index: binutils-2.24/ld/configure
+
+
+fi
-+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
-+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
-+ # Extract the first word of "mt", so it can be a program name with args.
-+set dummy mt; ac_word=$2
++if test -z "$ac_cv_prog_DLLTOOL"; then
++ ac_ct_DLLTOOL=$DLLTOOL
++ # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++ if test -n "$ac_ct_DLLTOOL"; then
++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
@@ -17333,7 +17693,7 @@ Index: binutils-2.24/ld/configure
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
@@ -17343,17 +17703,17 @@ Index: binutils-2.24/ld/configure
+
+fi
+fi
-+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-+if test -n "$ac_ct_MANIFEST_TOOL"; then
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
-+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
-+ MANIFEST_TOOL=":"
++ if test "x$ac_ct_DLLTOOL" = x; then
++ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
@@ -17361,762 +17721,630 @@ Index: binutils-2.24/ld/configure
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
-+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
-+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
-+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-+if test "${lt_cv_path_mainfest_tool+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ lt_cv_path_mainfest_tool=no
-+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
-+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
-+ cat conftest.err >&5
-+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
-+ lt_cv_path_mainfest_tool=yes
-+ fi
-+ rm -f conftest*
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-+if test "x$lt_cv_path_mainfest_tool" != xyes; then
-+ MANIFEST_TOOL=:
-+fi
++test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
-
- case $host_os in
- rhapsody* | darwin*)
-@@ -8168,6 +8665,8 @@ _LT_EOF
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
-+ echo "$RANLIB libconftest.a" >&5
-+ $RANLIB libconftest.a 2>&5
- cat > conftest.c << _LT_EOF
- int main() { return 0;}
- _LT_EOF
-@@ -8236,6 +8735,16 @@ done
-
-
-
-+func_stripname_cnf ()
-+{
-+ case ${2} in
-+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-+ esac
-+} # func_stripname_cnf
+
+
+
-
-
- # Set options
-@@ -8364,7 +8873,8 @@ fi
- LIBTOOL_DEPS="$ltmain"
-
- # Always use our own libtool.
--LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-+LIBTOOL='$(SHELL) $(top_builddir)'
-+LIBTOOL="$LIBTOOL/${host_alias}-libtool"
-
-
-
-@@ -8453,7 +8963,7 @@ aix3*)
- esac
-
- # Global variables:
--ofile=libtool
-+ofile=${host_alias}-libtool
- can_build_shared=yes
-
- # All known linkers require a `.a' archive for static linking (except MSVC,
-@@ -8751,8 +9261,6 @@ fi
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
-
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
--$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
-@@ -8918,6 +9426,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
-+ nagfor*)
-+ # NAG Fortran compiler
-+ lt_prog_compiler_wl='-Wl,-Wl,,'
-+ lt_prog_compiler_pic='-PIC'
-+ lt_prog_compiler_static='-Bstatic'
-+ ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
-@@ -8980,7 +9494,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
-- f77* | f90* | f95*)
-+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
-@@ -9037,13 +9551,17 @@ case $host_os in
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
- esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
--$as_echo "$lt_prog_compiler_pic" >&6; }
--
--
--
--
-
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic+set}" = set; then :
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
++$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
++if test "${lt_cv_sharedlib_from_linklib_cmd+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
++ lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ for ac_prog in ar
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_AR+set}" = set; then :
+@@ -6258,7 +6512,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_AR="${ac_tool_prefix}ar"
++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6278,11 +6532,15 @@ $as_echo "no" >&6; }
+ fi
- #
- # Check to make sure the PIC flag actually works.
-@@ -9104,6 +9622,11 @@ fi
++ test -n "$AR" && break
++ done
+ fi
+-if test -z "$ac_cv_prog_AR"; then
++if test -z "$AR"; then
+ ac_ct_AR=$AR
+- # Extract the first word of "ar", so it can be a program name with args.
+-set dummy ar; ac_word=$2
++ for ac_prog in ar
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+ $as_echo_n "checking for $ac_word... " >&6; }
+ if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+@@ -6298,7 +6556,7 @@ do
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+- ac_cv_prog_ac_ct_AR="ar"
++ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+@@ -6317,6 +6575,10 @@ else
+ $as_echo "no" >&6; }
+ fi
++
++ test -n "$ac_ct_AR" && break
++done
++
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+@@ -6328,16 +6590,72 @@ ac_tool_warned=yes ;;
+ esac
+ AR=$ac_ct_AR
+ fi
+-else
+- AR="$ac_cv_prog_AR"
+ fi
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
++: ${AR=ar}
++: ${AR_FLAGS=cru}
+
+
+
+
+
- #
- # Check to make sure the static flag actually works.
- #
-@@ -9454,7 +9977,8 @@ _LT_EOF
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
-- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
++$as_echo_n "checking for archiver @FILE support... " >&6; }
++if test "${lt_cv_ar_at_file+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ar_at_file=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-@@ -9502,7 +10026,7 @@ _LT_EOF
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
-- tmp_addflag=
-+ tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
-@@ -9553,12 +10077,12 @@ _LT_EOF
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec=
- hardcode_libdir_flag_spec_ld='-rpath $libdir'
-- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
-- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
-@@ -9572,8 +10096,8 @@ _LT_EOF
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
-@@ -9591,8 +10115,8 @@ _LT_EOF
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- _LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9638,8 +10162,8 @@ _LT_EOF
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
++$as_echo "$lt_cv_ar_at_file" >&6; }
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
-@@ -9769,7 +10293,13 @@ _LT_EOF
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
- int
-@@ -9782,22 +10312,29 @@ main ()
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
-+
-+fi
+
+@@ -6679,8 +6997,8 @@ esac
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+ # Transform an extracted symbol line into symbol name and symbol address
+-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+ # Handle CRLF in mingw tool chain
+ opt_cr=
+@@ -6716,6 +7034,7 @@ for ac_symprfx in "" "_"; do
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -6757,6 +7076,18 @@ _LT_EOF
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+@@ -6768,7 +7099,7 @@ _LT_EOF
+ cat <<_LT_EOF >> conftest.$ac_ext
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-@@ -9809,7 +10346,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ /* The mapping between symbol names and symbols. */
+-const struct {
++LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+ }
+@@ -6794,8 +7125,8 @@ static const void *lt_preloaded_setup() {
+ _LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+- lt_save_LIBS="$LIBS"
+- lt_save_CFLAGS="$CFLAGS"
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+@@ -6805,8 +7136,8 @@ _LT_EOF
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+- LIBS="$lt_save_LIBS"
+- CFLAGS="$lt_save_CFLAGS"
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath_+set}" = set; then :
-+ $as_echo_n "(cached) " >&6
-+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
-
- int
-@@ -9822,22 +10365,29 @@ main ()
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+@@ -6843,6 +7174,16 @@ else
+ $as_echo "ok" >&6; }
fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath_"; then
-+ lt_cv_aix_libpath_="/usr/lib:/lib"
-+ fi
-+
+
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
++ nm_file_list_spec='@'
+fi
+
-+ aix_libpath=$lt_cv_aix_libpath_
-+fi
++
++
++
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -9881,21 +10431,64 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
-- # no search path for DLLs.
-- hardcode_libdir_flag_spec=' '
-- allow_undefined_flag=unsupported
-- # Tell ltmain to make .lib files, not .a files.
-- libext=lib
-- # Tell ltmain to make .dll files, not .so files.
-- shrext_cmds=".dll"
-- # FIXME: Setting linknames here is a bad hack.
-- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-- # The linker will automatically build a .lib file if we build a DLL.
-- old_archive_from_new_cmds='true'
-- # FIXME: Should let the user specify the lib program.
-- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-- fix_srcfile_path='`cygpath -w "$srcfile"`'
-- enable_shared_with_static_runtimes=yes
-+ # no search path for DLLs.
-+ case $cc_basename in
-+ cl*)
-+ # Native MSVC
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ always_export_symbols=yes
-+ file_list_spec='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
-+ enable_shared_with_static_runtimes=yes
-+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-+ # Don't use ranlib
-+ old_postinstall_cmds='chmod 644 $oldlib'
-+ postlink_cmds='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # Assume MSVC wrapper
-+ hardcode_libdir_flag_spec=' '
-+ allow_undefined_flag=unsupported
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
-+ # The linker will automatically build a .lib file if we build a DLL.
-+ old_archive_from_new_cmds='true'
-+ # FIXME: Should let the user specify the lib program.
-+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-+ enable_shared_with_static_runtimes=yes
-+ ;;
-+ esac
- ;;
- darwin* | rhapsody*)
-@@ -9956,7 +10549,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
-- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
-@@ -9964,7 +10557,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+@@ -6864,6 +7205,45 @@ fi
- hpux9*)
- if test "$GCC" = yes; then
-- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
-@@ -9980,7 +10573,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
-@@ -10004,10 +10597,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
-@@ -10086,23 +10679,36 @@ fi
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
-- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
-- save_LDFLAGS="$LDFLAGS"
-- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ # This should be the same for all languages, so no per-tag cache variable.
-+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-+if test "${lt_cv_irix_exported_symbol+set}" = set; then :
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
++$as_echo_n "checking for sysroot... " >&6; }
++
++# Check whether --with-libtool-sysroot was given.
++if test "${with_libtool_sysroot+set}" = set; then :
++ withval=$with_libtool_sysroot;
++else
++ with_libtool_sysroot=no
++fi
++
++
++lt_sysroot=
++case ${with_libtool_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_libtool_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_libtool_sysroot}" >&5
++$as_echo "${with_libtool_sysroot}" >&6; }
++ as_fn_error "The sysroot must be an absolute path." "$LINENO" 5
++ ;;
++esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
++$as_echo "${lt_sysroot:-no}" >&6; }
++
++
++
++
++
+ # Check whether --enable-libtool-lock was given.
+ if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+@@ -7070,6 +7450,123 @@ esac
+
+ need_locks="$enable_libtool_lock"
+
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
++set dummy ${ac_tool_prefix}mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_MANIFEST_TOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ save_LDFLAGS="$LDFLAGS"
-+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
--int foo(void) {}
-+int foo (void) { return 0; }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
--
-+ lt_cv_irix_exported_symbol=yes
++ if test -n "$MANIFEST_TOOL"; then
++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
-+ lt_cv_irix_exported_symbol=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-- LDFLAGS="$save_LDFLAGS"
-+ LDFLAGS="$save_LDFLAGS"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
++if test -n "$MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
++$as_echo "$MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
-+ if test "$lt_cv_irix_exported_symbol" = yes; then
-+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-+ fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-@@ -10187,7 +10793,7 @@ rm -f core conftest.err conftest.$ac_objext \
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
-@@ -10206,9 +10812,9 @@ rm -f core conftest.err conftest.$ac_objext \
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
-- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
-@@ -10784,8 +11390,9 @@ cygwin* | mingw* | pw32* | cegcc*)
- need_version=no
- need_lib_prefix=no
-
-- case $GCC,$host_os in
-- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-+ case $GCC,$cc_basename in
-+ yes,*)
-+ # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
-@@ -10818,13 +11425,71 @@ cygwin* | mingw* | pw32* | cegcc*)
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
-+ dynamic_linker='Win32 ld.exe'
-+ ;;
+
-+ *,cl*)
-+ # Native MSVC
-+ libname_spec='$name'
-+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-+ library_names_spec='${libname}.dll.lib'
+
-+ case $build_os in
-+ mingw*)
-+ sys_lib_search_path_spec=
-+ lt_save_ifs=$IFS
-+ IFS=';'
-+ for lt_path in $LIB
-+ do
-+ IFS=$lt_save_ifs
-+ # Let DOS variable expansion print the short 8.3 style file name.
-+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
-+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
-+ done
-+ IFS=$lt_save_ifs
-+ # Convert to MSYS style.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
-+ ;;
-+ cygwin*)
-+ # Convert to unix form, then to dos form, then back to unix form
-+ # but this time dos style (no spaces!) so that the unix form looks
-+ # like /cygdrive/c/PROGRA~1:/cygdr...
-+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
-+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
-+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ ;;
-+ *)
-+ sys_lib_search_path_spec="$LIB"
-+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-+ # It is most probably a Windows format PATH.
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-+ else
-+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
-+ fi
-+ # FIXME: find the short name or the path components, as spaces are
-+ # common. (e.g. "Program Files" -> "PROGRA~1")
-+ ;;
-+ esac
++fi
++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
++ # Extract the first word of "mt", so it can be a program name with args.
++set dummy mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_MANIFEST_TOOL+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_MANIFEST_TOOL"; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
++if test -n "$ac_ct_MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_MANIFEST_TOOL" = x; then
++ MANIFEST_TOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ fi
++else
++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++fi
++
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
++if test "${lt_cv_path_mainfest_tool+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&5
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
++$as_echo "$lt_cv_path_mainfest_tool" >&6; }
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++
++
++
++
+
-+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
-+ postinstall_cmds='base_file=`basename \${file}`~
-+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-+ dldir=$destdir/`dirname \$dlpath`~
-+ test -d \$dldir || mkdir -p \$dldir~
-+ $install_prog $dir/$dlname \$dldir/$dlname'
-+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-+ dlpath=$dir/\$dldll~
-+ $RM \$dlpath'
-+ shlibpath_overrides_runpath=yes
-+ dynamic_linker='Win32 link.exe'
- ;;
- *)
-+ # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-+ dynamic_linker='Win32 ld.exe'
- ;;
- esac
-- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-@@ -10916,7 +11581,7 @@ haiku*)
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
-- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/beos/system/lib'
-+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
+ case $host_os in
+ rhapsody* | darwin*)
+@@ -7633,6 +8130,8 @@ _LT_EOF
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
++ echo "$RANLIB libconftest.a" >&5
++ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+ int main() { return 0;}
+ _LT_EOF
+@@ -7798,7 +8297,8 @@ fi
+ LIBTOOL_DEPS="$ltmain"
-@@ -11712,7 +12377,7 @@ else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
--#line 11715 "configure"
-+#line $LINENO "configure"
- #include "confdefs.h"
+ # Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++LIBTOOL='$(SHELL) $(top_builddir)'
++LIBTOOL="$LIBTOOL/${host_alias}-libtool"
- #if HAVE_DLFCN_H
-@@ -11756,10 +12421,10 @@ else
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -11818,7 +12483,7 @@ else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
--#line 11821 "configure"
-+#line $LINENO "configure"
- #include "confdefs.h"
- #if HAVE_DLFCN_H
-@@ -11862,10 +12527,10 @@ else
- /* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
- #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
--void fnord () __attribute__((visibility("default")));
-+int fnord () __attribute__((visibility("default")));
- #endif
+@@ -7887,7 +8387,7 @@ aix3*)
+ esac
--void fnord () { int i=42; }
-+int fnord () { return 42; }
- int main ()
- {
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-@@ -12257,6 +12922,7 @@ $RM -r conftest*
+ # Global variables:
+-ofile=libtool
++ofile=${host_alias}-libtool
+ can_build_shared=yes
- # Allow CC to be a program name with arguments.
- lt_save_CC=$CC
-+ lt_save_CFLAGS=$CFLAGS
- lt_save_LD=$LD
- lt_save_GCC=$GCC
- GCC=$GXX
-@@ -12274,6 +12940,7 @@ $RM -r conftest*
- fi
- test -z "${LDCXX+set}" || LD=$LDCXX
- CC=${CXX-"c++"}
-+ CFLAGS=$CXXFLAGS
- compiler=$CC
- compiler_CXX=$CC
- for cc_temp in $compiler""; do
-@@ -12413,8 +13080,8 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
-- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+@@ -8185,8 +8685,6 @@ fi
+ lt_prog_compiler_pic=
+ lt_prog_compiler_static=
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-@@ -12556,7 +13223,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
- allow_undefined_flag_CXX='-berok'
- # Determine the default libpath from the value encoded in an empty
- # executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
-+ aix_libpath=$lt_cv_aix_libpath
-+else
-+ if test "${lt_cv_aix_libpath__CXX+set}" = set; then :
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+@@ -8352,6 +8850,12 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+@@ -8414,7 +8918,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+- f77* | f90* | f95*)
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+@@ -8471,13 +8975,17 @@ case $host_os in
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+ esac
+-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+-$as_echo "$lt_prog_compiler_pic" >&6; }
+-
+-
+-
+-
+
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if test "${lt_cv_prog_compiler_pic+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h. */
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+ #
+ # Check to make sure the PIC flag actually works.
+@@ -8538,6 +9046,11 @@ fi
+
- int
-@@ -12569,22 +13242,29 @@ main ()
- _ACEOF
- if ac_fn_cxx_try_link "$LINENO"; then :
--lt_aix_libpath_sed='
-- /Import File Strings/,/^$/ {
-- /^0/ {
-- s/^0 *\(.*\)$/\1/
-- p
-- }
-- }'
--aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--# Check for a 64-bit object if we didn't find anything.
--if test -z "$aix_libpath"; then
-- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
--fi
-+ lt_aix_libpath_sed='
-+ /Import File Strings/,/^$/ {
-+ /^0/ {
-+ s/^0 *\([^ ]*\) *$/\1/
-+ p
-+ }
-+ }'
-+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath__CXX"; then
-+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-+ fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
--if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath__CXX"; then
-+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
-+ fi
+
-+fi
+
-+ aix_libpath=$lt_cv_aix_libpath__CXX
-+fi
++
++
++
+ #
+ # Check to make sure the static flag actually works.
+ #
+@@ -8888,7 +9401,8 @@ _LT_EOF
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+@@ -8936,7 +9450,7 @@ _LT_EOF
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+- tmp_addflag=
++ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+@@ -8987,12 +9501,12 @@ _LT_EOF
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+@@ -9006,8 +9520,8 @@ _LT_EOF
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+@@ -9025,8 +9539,8 @@ _LT_EOF
+
+ _LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9072,8 +9586,8 @@ _LT_EOF
-@@ -12597,7 +13277,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
-- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-+ if test "${lt_cv_aix_libpath+set}" = set; then
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+@@ -9203,7 +9717,13 @@ _LT_EOF
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
-+ if test "${lt_cv_aix_libpath__CXX+set}" = set; then :
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
-@@ -12610,22 +13296,29 @@ main ()
+@@ -9216,22 +9736,29 @@ main ()
_ACEOF
- if ac_fn_cxx_try_link "$LINENO"; then :
+ if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
@@ -18137,387 +18365,269 @@ Index: binutils-2.24/ld/configure
+ p
+ }
+ }'
-+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
-+ if test -z "$lt_cv_aix_libpath__CXX"; then
-+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-+ if test -z "$lt_cv_aix_libpath__CXX"; then
-+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
+
+fi
+
-+ aix_libpath=$lt_cv_aix_libpath__CXX
-+fi
-
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
-@@ -12668,29 +13361,75 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
-- # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-- # as there is no search path for DLLs.
-- hardcode_libdir_flag_spec_CXX='-L$libdir'
-- export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
-- allow_undefined_flag_CXX=unsupported
-- always_export_symbols_CXX=no
-- enable_shared_with_static_runtimes_CXX=yes
--
-- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-- # If the export-symbols file already is a .def file (1st line
-- # is EXPORTS), use it as is; otherwise, prepend...
-- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-- cp $export_symbols $output_objdir/$soname.def;
-- else
-- echo EXPORTS > $output_objdir/$soname.def;
-- cat $export_symbols >> $output_objdir/$soname.def;
-- fi~
-- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-- else
-- ld_shlibs_CXX=no
-- fi
-- ;;
-+ case $GXX,$cc_basename in
-+ ,cl* | no,cl*)
-+ # Native MSVC
-+ # hardcode_libdir_flag_spec is actually meaningless, as there is
-+ # no search path for DLLs.
-+ hardcode_libdir_flag_spec_CXX=' '
-+ allow_undefined_flag_CXX=unsupported
-+ always_export_symbols_CXX=yes
-+ file_list_spec_CXX='@'
-+ # Tell ltmain to make .lib files, not .a files.
-+ libext=lib
-+ # Tell ltmain to make .dll files, not .so files.
-+ shrext_cmds=".dll"
-+ # FIXME: Setting linknames here is a bad hack.
-+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-+ else
-+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-+ fi~
-+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-+ linknames='
-+ # The linker will not automatically build a static lib if we build a DLL.
-+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
-+ enable_shared_with_static_runtimes_CXX=yes
-+ # Don't use ranlib
-+ old_postinstall_cmds_CXX='chmod 644 $oldlib'
-+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
-+ lt_tool_outputfile="@TOOL_OUTPUT@"~
-+ case $lt_outputfile in
-+ *.exe|*.EXE) ;;
-+ *)
-+ lt_outputfile="$lt_outputfile.exe"
-+ lt_tool_outputfile="$lt_tool_outputfile.exe"
-+ ;;
-+ esac~
-+ func_to_tool_file "$lt_outputfile"~
-+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-+ $RM "$lt_outputfile.manifest";
-+ fi'
-+ ;;
-+ *)
-+ # g++
-+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-+ # as there is no search path for DLLs.
-+ hardcode_libdir_flag_spec_CXX='-L$libdir'
-+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
-+ allow_undefined_flag_CXX=unsupported
-+ always_export_symbols_CXX=no
-+ enable_shared_with_static_runtimes_CXX=yes
-+
-+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ # If the export-symbols file already is a .def file (1st line
-+ # is EXPORTS), use it as is; otherwise, prepend...
-+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-+ cp $export_symbols $output_objdir/$soname.def;
-+ else
-+ echo EXPORTS > $output_objdir/$soname.def;
-+ cat $export_symbols >> $output_objdir/$soname.def;
-+ fi~
-+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-+ else
-+ ld_shlibs_CXX=no
-+ fi
-+ ;;
-+ esac
-+ ;;
- darwin* | rhapsody*)
-
-
-@@ -12796,7 +13535,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- ;;
- *)
- if test "$GXX" = yes; then
-- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- ld_shlibs_CXX=no
-@@ -12867,10 +13606,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
-- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
-- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
-@@ -12911,9 +13650,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
-- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
-- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
-+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
- fi
- fi
- link_all_deplibs_CXX=yes
-@@ -12983,20 +13722,20 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- prelink_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
- old_archive_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
- archive_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- *) # Version 6 and above use weak symbols
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-@@ -13191,7 +13930,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- *)
-- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- esac
-
-@@ -13237,7 +13976,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- archive_cmds_need_lc_CXX=yes
- no_undefined_flag_CXX=' -zdefs'
-@@ -13278,9 +14017,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
-@@ -13415,6 +14154,13 @@ private:
- };
- _LT_EOF
-
-+
-+_lt_libdeps_save_CFLAGS=$CFLAGS
-+case "$CC $CFLAGS " in #(
-+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-+esac
-+
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
-@@ -13428,7 +14174,7 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- pre_test_object_deps_done=no
-
- for p in `eval "$output_verbose_link_cmd"`; do
-- case $p in
-+ case ${prev}${p} in
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
-@@ -13437,13 +14183,22 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- test $p = "-R"; then
- prev=$p
- continue
-- else
-- prev=
- fi
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+@@ -9243,7 +9770,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if test "${lt_cv_aix_libpath_+set}" = set; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
-+ # Expand the sysroot to ease extracting the directories later.
-+ if test -z "$prev"; then
-+ case $p in
-+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
-+ esac
-+ fi
-+ case $p in
-+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
-+ esac
- if test "$pre_test_object_deps_done" = no; then
-- case $p in
-- -L* | -R*)
-+ case ${prev} in
-+ -L | -R)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
-@@ -13463,8 +14218,10 @@ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- postdeps_CXX="${postdeps_CXX} ${prev}${p}"
- fi
- fi
-+ prev=
- ;;
+ int
+@@ -9256,22 +9789,29 @@ main ()
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
-+ *.lto.$objext) ;; # Ignore GCC LTO objects
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
-@@ -13500,6 +14257,7 @@ else
+-lt_aix_libpath_sed='
+- /Import File Strings/,/^$/ {
+- /^0/ {
+- s/^0 *\(.*\)$/\1/
+- p
+- }
+- }'
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then
+- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+-fi
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
- $RM -f confest.$objext
-+CFLAGS=$_lt_libdeps_save_CFLAGS
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+@@ -9316,20 +9856,63 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+- hardcode_libdir_flag_spec=' '
+- allow_undefined_flag=unsupported
+- # Tell ltmain to make .lib files, not .a files.
+- libext=lib
+- # Tell ltmain to make .dll files, not .so files.
+- shrext_cmds=".dll"
+- # FIXME: Setting linknames here is a bad hack.
+- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+- # The linker will automatically build a .lib file if we build a DLL.
+- old_archive_from_new_cmds='true'
+- # FIXME: Should let the user specify the lib program.
+- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+- fix_srcfile_path='`cygpath -w "$srcfile"`'
+- enable_shared_with_static_runtimes=yes
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
+ ;;
- # PORTME: override above test on systems where it is broken
- case $host_os in
-@@ -13535,7 +14293,7 @@ linux*)
+ darwin* | rhapsody*)
+@@ -9390,7 +9973,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
-@@ -13600,8 +14358,6 @@ fi
- lt_prog_compiler_pic_CXX=
- lt_prog_compiler_static_CXX=
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+@@ -9398,7 +9981,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
--$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ hpux9*)
+ if test "$GCC" = yes; then
+- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+@@ -9414,7 +9997,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
-@@ -13706,6 +14462,11 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+@@ -9438,10 +10021,10 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
- ;;
-+ mingw* | cygwin* | os2* | pw32* | cegcc*)
-+ # This hack is so that the source file can tell whether it is being
-+ # built for inclusion in a dll (and should export symbols for example).
-+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-+ ;;
- dgux*)
- case $cc_basename in
- ec++*)
-@@ -13858,7 +14619,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- ;;
- solaris*)
- case $cc_basename in
-- CC*)
-+ CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- lt_prog_compiler_pic_CXX='-KPIC'
- lt_prog_compiler_static_CXX='-Bstatic'
-@@ -13923,10 +14684,17 @@ case $host_os in
- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
- ;;
- esac
--{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
--$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
--
+ else
+@@ -9520,23 +10103,36 @@ fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-+if test "${lt_cv_prog_compiler_pic_CXX+set}" = set; then :
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if test "${lt_cv_irix_exported_symbol+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
-+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ /* end confdefs.h. */
+-int foo(void) {}
++int foo (void) { return 0; }
+ _ACEOF
+ if ac_fn_c_try_link "$LINENO"; then :
+- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+-
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
+ fi
+ rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+- LDFLAGS="$save_LDFLAGS"
++ LDFLAGS="$save_LDFLAGS"
+fi
-+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
-+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
-+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
-
- #
- # Check to make sure the PIC flag actually works.
-@@ -13984,6 +14752,8 @@ fi
-
-
-
-+
-+
- #
- # Check to make sure the static flag actually works.
- #
-@@ -14161,6 +14931,7 @@ fi
- $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- case $host_os in
- aix[4-9]*)
- # If we're using GNU nm, then we don't want the "-C" option.
-@@ -14175,15 +14946,20 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
- ;;
- pw32*)
- export_symbols_cmds_CXX="$ltdll_cmds"
-- ;;
-+ ;;
- cygwin* | mingw* | cegcc*)
-- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-+ case $cc_basename in
-+ cl*) ;;
-+ *)
-+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
-+ ;;
-+ esac
-+ ;;
- *)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-- ;;
-+ ;;
- esac
-- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
- $as_echo "$ld_shlibs_CXX" >&6; }
-@@ -14446,8 +15222,9 @@ cygwin* | mingw* | pw32* | cegcc*)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+@@ -9621,7 +10217,7 @@ rm -f core conftest.err conftest.$ac_objext \
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+@@ -9640,9 +10236,9 @@ rm -f core conftest.err conftest.$ac_objext \
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+@@ -10218,8 +10814,9 @@ cygwin* | mingw* | pw32* | cegcc*)
need_version=no
need_lib_prefix=no
@@ -18529,7 +18639,7 @@ Index: binutils-2.24/ld/configure
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
-@@ -14479,13 +15256,71 @@ cygwin* | mingw* | pw32* | cegcc*)
+@@ -10252,13 +10849,71 @@ cygwin* | mingw* | pw32* | cegcc*)
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
@@ -18602,7 +18712,7 @@ Index: binutils-2.24/ld/configure
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
-@@ -14576,7 +15411,7 @@ haiku*)
+@@ -10350,7 +11005,7 @@ haiku*)
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=yes
@@ -18611,15 +18721,42 @@ Index: binutils-2.24/ld/configure
hardcode_into_libs=yes
;;
-@@ -15035,6 +15870,7 @@ fi
- fi # test -n "$compiler"
+@@ -11190,10 +11845,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
- CC=$lt_save_CC
-+ CFLAGS=$lt_save_CFLAGS
- LDCXX=$LD
- LD=$lt_save_LD
- GCC=$lt_save_GCC
-@@ -17807,13 +18643,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -11296,10 +11951,10 @@ else
+ /* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+ #if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+-void fnord () __attribute__((visibility("default")));
++int fnord () __attribute__((visibility("default")));
+ #endif
+
+-void fnord () { int i=42; }
++int fnord () { return 42; }
+ int main ()
+ {
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+@@ -12450,7 +13105,7 @@ if test "$enable_shared" = "yes"; then
+ # since libbfd may not pull in the entirety of libiberty.
+ x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
+ if test -n "$x"; then
+- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
++ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
+ fi
+
+ case "${host}" in
+@@ -13422,13 +14077,20 @@ exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
@@ -18640,7 +18777,7 @@ Index: binutils-2.24/ld/configure
STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-@@ -17828,14 +18671,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
+@@ -13443,14 +14105,17 @@ lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$de
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
@@ -18659,7 +18796,7 @@ Index: binutils-2.24/ld/configure
DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-@@ -17868,12 +18714,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
+@@ -13483,12 +14148,12 @@ hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_q
hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
@@ -18673,31 +18810,7 @@ Index: binutils-2.24/ld/configure
file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-@@ -17912,8 +18758,8 @@ old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote
- compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
- GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
--lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
-+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
- lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
- lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
- archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
-@@ -17940,12 +18786,12 @@ hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_
- hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
- inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
- link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
--fix_srcfile_path_CXX='`$ECHO "$fix_srcfile_path_CXX" | $SED "$delay_single_quote_subst"`'
- always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
- export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
- exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
- include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
- prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
-+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
- file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
- hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
- compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
-@@ -17983,8 +18829,13 @@ reload_flag \
+@@ -13543,8 +14208,13 @@ reload_flag \
OBJDUMP \
deplibs_check_method \
file_magic_cmd \
@@ -18711,7 +18824,7 @@ Index: binutils-2.24/ld/configure
STRIP \
RANLIB \
CC \
-@@ -17994,12 +18845,14 @@ lt_cv_sys_global_symbol_pipe \
+@@ -13554,12 +14224,14 @@ lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
@@ -18727,7 +18840,7 @@ Index: binutils-2.24/ld/configure
DSYMUTIL \
NMEDIT \
LIPO \
-@@ -18015,7 +18868,6 @@ no_undefined_flag \
+@@ -13575,7 +14247,6 @@ no_undefined_flag \
hardcode_libdir_flag_spec \
hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
@@ -18735,25 +18848,7 @@ Index: binutils-2.24/ld/configure
exclude_expsyms \
include_expsyms \
file_list_spec \
-@@ -18037,8 +18889,8 @@ LD_CXX \
- reload_flag_CXX \
- compiler_CXX \
- lt_prog_compiler_no_builtin_flag_CXX \
--lt_prog_compiler_wl_CXX \
- lt_prog_compiler_pic_CXX \
-+lt_prog_compiler_wl_CXX \
- lt_prog_compiler_static_CXX \
- lt_cv_prog_compiler_c_o_CXX \
- export_dynamic_flag_spec_CXX \
-@@ -18050,7 +18902,6 @@ no_undefined_flag_CXX \
- hardcode_libdir_flag_spec_CXX \
- hardcode_libdir_flag_spec_ld_CXX \
- hardcode_libdir_separator_CXX \
--fix_srcfile_path_CXX \
- exclude_expsyms_CXX \
- include_expsyms_CXX \
- file_list_spec_CXX \
-@@ -18084,6 +18935,7 @@ module_cmds \
+@@ -13611,6 +14282,7 @@ module_cmds \
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
@@ -18761,17 +18856,7 @@ Index: binutils-2.24/ld/configure
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
-@@ -18098,7 +18950,8 @@ archive_expsym_cmds_CXX \
- module_cmds_CXX \
- module_expsym_cmds_CXX \
- export_symbols_cmds_CXX \
--prelink_cmds_CXX; do
-+prelink_cmds_CXX \
-+postlink_cmds_CXX; do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-@@ -18891,7 +19744,8 @@ $as_echo X"$file" |
+@@ -14367,7 +15039,8 @@ $as_echo X"$file" |
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
@@ -18781,7 +18866,7 @@ Index: binutils-2.24/ld/configure
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
-@@ -18994,19 +19848,42 @@ SP2NL=$lt_lt_SP2NL
+@@ -14470,19 +15143,42 @@ SP2NL=$lt_lt_SP2NL
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
@@ -18825,7 +18910,7 @@ Index: binutils-2.24/ld/configure
# A symbol stripping program.
STRIP=$lt_STRIP
-@@ -19036,6 +19913,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+@@ -14512,6 +15208,12 @@ global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
@@ -18838,7 +18923,7 @@ Index: binutils-2.24/ld/configure
# The name of the directory that contains temporary libtool files.
objdir=$objdir
-@@ -19045,6 +19928,9 @@ MAGIC_CMD=$MAGIC_CMD
+@@ -14521,6 +15223,9 @@ MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
@@ -18848,7 +18933,7 @@ Index: binutils-2.24/ld/configure
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
-@@ -19159,12 +20045,12 @@ with_gcc=$GCC
+@@ -14635,12 +15340,12 @@ with_gcc=$GCC
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
@@ -18864,7 +18949,7 @@ Index: binutils-2.24/ld/configure
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
-@@ -19251,9 +20137,6 @@ inherit_rpath=$inherit_rpath
+@@ -14727,9 +15432,6 @@ inherit_rpath=$inherit_rpath
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
@@ -18874,7 +18959,7 @@ Index: binutils-2.24/ld/configure
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
-@@ -19269,6 +20152,9 @@ include_expsyms=$lt_include_expsyms
+@@ -14745,6 +15447,9 @@ include_expsyms=$lt_include_expsyms
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
@@ -18884,7 +18969,7 @@ Index: binutils-2.24/ld/configure
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
-@@ -19315,210 +20201,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
+@@ -14777,210 +15482,169 @@ ltmain="$ac_aux_dir/ltmain.sh"
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
@@ -19258,60 +19343,11 @@ Index: binutils-2.24/ld/configure
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
-@@ -19546,12 +20391,12 @@ with_gcc=$GCC_CXX
- # Compiler flag to turn off builtin functions.
- no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-
--# How to pass a linker flag through the compiler.
--wl=$lt_lt_prog_compiler_wl_CXX
--
- # Additional compiler flags for building library objects.
- pic_flag=$lt_lt_prog_compiler_pic_CXX
-
-+# How to pass a linker flag through the compiler.
-+wl=$lt_lt_prog_compiler_wl_CXX
-+
- # Compiler flag to prevent dynamic linking.
- link_static_flag=$lt_lt_prog_compiler_static_CXX
-
-@@ -19638,9 +20483,6 @@ inherit_rpath=$inherit_rpath_CXX
- # Whether libtool must link a program against all its dependency libraries.
- link_all_deplibs=$link_all_deplibs_CXX
-
--# Fix the shell variable \$srcfile for the compiler.
--fix_srcfile_path=$lt_fix_srcfile_path_CXX
--
- # Set to "yes" if exported symbols are required.
- always_export_symbols=$always_export_symbols_CXX
-
-@@ -19656,6 +20498,9 @@ include_expsyms=$lt_include_expsyms_CXX
- # Commands necessary for linking programs (against libraries) with templates.
- prelink_cmds=$lt_prelink_cmds_CXX
-
-+# Commands necessary for finishing linking programs.
-+postlink_cmds=$lt_postlink_cmds_CXX
-+
- # Specify filename containing input files.
- file_list_spec=$lt_file_list_spec_CXX
-
-Index: binutils-2.24/bfd/configure.ac
-===================================================================
---- binutils-2.24.orig/bfd/configure.ac 2013-12-02 01:30:28.000000000 -0800
-+++ binutils-2.24/bfd/configure.ac 2013-12-15 11:10:23.887118697 -0800
-@@ -568,7 +568,7 @@
- x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
- changequote([,])dnl
- if test -n "$x"; then
-- SHARED_LIBADD="-L`pwd`/../libiberty/pic -liberty"
-+ SHARED_LIBADD="`pwd`/../libiberty/pic/libiberty.a"
- fi
-
- # More hacks to build DLLs on Windows.
-Index: binutils-2.24/opcodes/configure.ac
-===================================================================
---- binutils-2.24.orig/opcodes/configure.ac 2013-11-04 07:33:40.000000000 -0800
-+++ binutils-2.24/opcodes/configure.ac 2013-12-15 11:10:23.887118697 -0800
-@@ -162,7 +162,7 @@
+diff --git a/opcodes/configure.ac b/opcodes/configure.ac
+index b93e855..43ba976 100644
+--- a/opcodes/configure.ac
++++ b/opcodes/configure.ac
+@@ -167,7 +167,7 @@ changequote(,)dnl
x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | sed -n '$p'`
changequote([,])dnl
if test -n "$x"; then
@@ -19320,3 +19356,6 @@ Index: binutils-2.24/opcodes/configure.ac
fi
case "${host}" in
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-armv5e.patch b/meta/recipes-devtools/binutils/binutils/0007-Add-the-armv5e-architecture-to-binutils.patch
similarity index 43%
rename from meta/recipes-devtools/binutils/binutils/binutils-armv5e.patch
rename to meta/recipes-devtools/binutils/binutils/0007-Add-the-armv5e-architecture-to-binutils.patch
index 97ad6df..a037634 100644
--- a/meta/recipes-devtools/binutils/binutils/binutils-armv5e.patch
+++ b/meta/recipes-devtools/binutils/binutils/0007-Add-the-armv5e-architecture-to-binutils.patch
@@ -1,21 +1,28 @@
-Add the armv5e architecture to binutils
+From 743f42aaecb1ab89eba0eaf5e88ed67bbf3ba304 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:37:10 +0000
+Subject: [PATCH 07/13] Add the armv5e architecture to binutils
-Binutils has a comment that indicates it is supposed to match gcc for all of
-the support "-march=" settings, but it was lacking the armv5e setting. This
-was a simple way to add it, as thumb instructions shouldn't be generated by
-the compiler anyway.
+Binutils has a comment that indicates it is supposed to match gcc for
+all of the support "-march=" settings, but it was lacking the armv5e setting.
+This was a simple way to add it, as thumb instructions shouldn't be generated
+by the compiler anyway.
Upstream-Status: Denied
-Upstream maintainer indicated that we should not be using armv5e, even though
-it is a legal archicture defined by our gcc.
+Upstream maintainer indicated that we should not be using armv5e, even
+though it is a legal archicture defined by our gcc.
Signed-off-by: Mark Hatle <mark.hatle at windriver.com>
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ gas/config/tc-arm.c | 1 +
+ 1 file changed, 1 insertion(+)
-Index: binutils-2.22.90/gas/config/tc-arm.c
-===================================================================
---- binutils-2.22.90.orig/gas/config/tc-arm.c 2012-07-24 09:38:32.000000000 -0700
-+++ binutils-2.22.90/gas/config/tc-arm.c 2012-08-07 23:41:59.822564075 -0700
-@@ -23162,6 +23162,7 @@
+diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c
+index 2db6c2d..ab48168 100644
+--- a/gas/config/tc-arm.c
++++ b/gas/config/tc-arm.c
+@@ -24463,6 +24463,7 @@ static const struct arm_arch_option_table arm_archs[] =
ARM_ARCH_OPT ("armv4t", ARM_ARCH_V4T, FPU_ARCH_FPA),
ARM_ARCH_OPT ("armv4txm", ARM_ARCH_V4TxM, FPU_ARCH_FPA),
ARM_ARCH_OPT ("armv5", ARM_ARCH_V5, FPU_ARCH_VFP),
@@ -23,3 +30,6 @@ Index: binutils-2.22.90/gas/config/tc-arm.c
ARM_ARCH_OPT ("armv5t", ARM_ARCH_V5T, FPU_ARCH_VFP),
ARM_ARCH_OPT ("armv5txm", ARM_ARCH_V5TxM, FPU_ARCH_VFP),
ARM_ARCH_OPT ("armv5te", ARM_ARCH_V5TE, FPU_ARCH_VFP),
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/libiberty_path_fix.patch b/meta/recipes-devtools/binutils/binutils/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch
similarity index 43%
rename from meta/recipes-devtools/binutils/binutils/libiberty_path_fix.patch
rename to meta/recipes-devtools/binutils/binutils/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch
index 6e732fb..0ae68fc 100644
--- a/meta/recipes-devtools/binutils/binutils/libiberty_path_fix.patch
+++ b/meta/recipes-devtools/binutils/binutils/0008-don-t-let-the-distro-compiler-point-to-the-wrong-ins.patch
@@ -1,16 +1,26 @@
-Upstream-Status: Inappropriate [embedded specific]
-
-don't let the distro compiler point to the wrong installation location
+From 4d3a9f6db604055348332b56889d466c058fa5f3 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:39:01 +0000
+Subject: [PATCH 08/13] don't let the distro compiler point to the wrong
+ installation location
Thanks to RP for helping find the source code causing the issue.
2010/08/13
Nitin A Kamble <nitin.a.kamble at intel.com>
-Index: binutils-2.22/libiberty/Makefile.in
-===================================================================
---- binutils-2.22.orig/libiberty/Makefile.in
-+++ binutils-2.22/libiberty/Makefile.in
-@@ -350,7 +350,8 @@ install-strip: install
+
+Upstream-Status: Inappropriate [embedded specific]
+
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ libiberty/Makefile.in | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in
+index 9b87720..ff43f53 100644
+--- a/libiberty/Makefile.in
++++ b/libiberty/Makefile.in
+@@ -361,7 +361,8 @@ install-strip: install
# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the
# default multilib, so we have to take CFLAGS into account as well,
# since it will be passed the multilib flags.
@@ -18,5 +28,8 @@ Index: binutils-2.22/libiberty/Makefile.in
+#MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory`
+MULTIOSDIR = ""
install_to_libdir: all
- ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR)
- $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n
+ if test -n "${target_header_dir}"; then \
+ ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR); \
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-poison.patch b/meta/recipes-devtools/binutils/binutils/0009-Upstream-Status-Inappropriate-distribution-codesourc.patch
similarity index 75%
rename from meta/recipes-devtools/binutils/binutils/binutils-poison.patch
rename to meta/recipes-devtools/binutils/binutils/0009-Upstream-Status-Inappropriate-distribution-codesourc.patch
index eb54076..f800796 100644
--- a/meta/recipes-devtools/binutils/binutils/binutils-poison.patch
+++ b/meta/recipes-devtools/binutils/binutils/0009-Upstream-Status-Inappropriate-distribution-codesourc.patch
@@ -1,4 +1,8 @@
-Upstream-Status: Inappropriate [distribution: codesourcery]
+From e02e119b278c3f404e97669e7180cac944134c91 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:41:04 +0000
+Subject: [PATCH 09/13] Upstream-Status: Inappropriate [distribution:
+ codesourcery]
Patch originally created by Mark Hatle, forward-ported to
binutils 2.21 by Scott Garman.
@@ -51,11 +55,23 @@ Code Merged from Sourcery G++ binutils 2.19 - 4.4-277
Signed-off-by: Mark Hatle <mark.hatle at windriver.com>
Signed-off-by: Scott Garman <scott.a.garman at intel.com>
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ ld/config.in | 3 +++
+ ld/configure | 14 ++++++++++++++
+ ld/configure.ac | 10 ++++++++++
+ ld/ld.h | 8 ++++++++
+ ld/ld.texinfo | 12 ++++++++++++
+ ld/ldfile.c | 17 +++++++++++++++++
+ ld/ldlex.h | 2 ++
+ ld/ldmain.c | 2 ++
+ ld/lexsup.c | 16 ++++++++++++++++
+ 9 files changed, 84 insertions(+)
-Index: binutils-2.24/ld/config.in
-===================================================================
---- binutils-2.24.orig/ld/config.in 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/config.in 2013-12-15 11:46:59.810435651 -0800
+diff --git a/ld/config.in b/ld/config.in
+index 2ab4844..766d23c 100644
+--- a/ld/config.in
++++ b/ld/config.in
@@ -11,6 +11,9 @@
language is requested. */
#undef ENABLE_NLS
@@ -66,11 +82,11 @@ Index: binutils-2.24/ld/config.in
/* Additional extension a shared object might have. */
#undef EXTRA_SHLIB_EXTENSION
-Index: binutils-2.24/ld/configure
-===================================================================
---- binutils-2.24.orig/ld/configure 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/configure 2013-12-15 11:46:59.810435651 -0800
-@@ -777,6 +777,7 @@
+diff --git a/ld/configure b/ld/configure
+index 2fbaebf..5726a08 100755
+--- a/ld/configure
++++ b/ld/configure
+@@ -787,6 +787,7 @@ with_lib_path
enable_targets
enable_64_bit_bfd
with_sysroot
@@ -78,8 +94,8 @@ Index: binutils-2.24/ld/configure
enable_gold
enable_got
enable_werror
-@@ -1433,6 +1434,8 @@
- (and sometimes confusing) to the casual installer
+@@ -1443,6 +1444,8 @@ Optional Features:
+ --disable-largefile omit support for large files
--enable-targets alternative target configurations
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)
+ --enable-poison-system-directories
@@ -87,7 +103,7 @@ Index: binutils-2.24/ld/configure
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
--enable-got=<type> GOT handling scheme (target, single, negative,
multigot)
-@@ -4345,7 +4348,18 @@
+@@ -16323,7 +16326,18 @@ else
fi
@@ -106,11 +122,11 @@ Index: binutils-2.24/ld/configure
# Check whether --enable-got was given.
if test "${enable_got+set}" = set; then :
-Index: binutils-2.24/ld/configure.ac
-===================================================================
---- binutils-2.24.orig/ld/configure.ac 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/configure.ac 2013-12-15 11:46:59.810435651 -0800
-@@ -87,6 +87,16 @@
+diff --git a/ld/configure.ac b/ld/configure.ac
+index 1bddfc9..e9edb7f 100644
+--- a/ld/configure.ac
++++ b/ld/configure.ac
+@@ -94,6 +94,16 @@ AC_SUBST(use_sysroot)
AC_SUBST(TARGET_SYSTEM_ROOT)
AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
@@ -127,39 +143,11 @@ Index: binutils-2.24/ld/configure.ac
dnl Use --enable-gold to decide if this linker should be the default.
dnl "install_as_default" is set to false if gold is the default linker.
dnl "installed_linker" is the installed BFD linker name.
-Index: binutils-2.24/ld/ldfile.c
-===================================================================
---- binutils-2.24.orig/ld/ldfile.c 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/ldfile.c 2013-12-15 11:46:59.813768989 -0800
-@@ -116,6 +116,23 @@
- new_dirs->name = concat (ld_sysroot, name + 1, (const char *) NULL);
- else
- new_dirs->name = xstrdup (name);
-+
-+#ifdef ENABLE_POISON_SYSTEM_DIRECTORIES
-+ if (command_line.poison_system_directories
-+ && ((!strncmp (name, "/lib", 4))
-+ || (!strncmp (name, "/usr/lib", 8))
-+ || (!strncmp (name, "/usr/local/lib", 14))
-+ || (!strncmp (name, "/usr/X11R6/lib", 14))))
-+ {
-+ if (command_line.error_poison_system_directories)
-+ einfo (_("%X%P: error: library search path \"%s\" is unsafe for "
-+ "cross-compilation\n"), name);
-+ else
-+ einfo (_("%P: warning: library search path \"%s\" is unsafe for "
-+ "cross-compilation\n"), name);
-+ }
-+#endif
-+
- }
-
- /* Try to open a BFD for a lang_input_statement. */
-Index: binutils-2.24/ld/ld.h
-===================================================================
---- binutils-2.24.orig/ld/ld.h 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/ld.h 2013-12-15 11:46:59.813768989 -0800
-@@ -180,6 +180,14 @@
+diff --git a/ld/ld.h b/ld/ld.h
+index f773ce7..adba0f6 100644
+--- a/ld/ld.h
++++ b/ld/ld.h
+@@ -161,6 +161,14 @@ typedef struct {
/* If TRUE we'll just print the default output on stdout. */
bfd_boolean print_output_format;
@@ -174,24 +162,11 @@ Index: binutils-2.24/ld/ld.h
/* Big or little endian as set on command line. */
enum endian_enum endian;
-Index: binutils-2.24/ld/ldmain.c
-===================================================================
---- binutils-2.24.orig/ld/ldmain.c 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/ldmain.c 2013-12-15 11:48:12.087101740 -0800
-@@ -266,6 +266,8 @@
- command_line.warn_mismatch = TRUE;
- command_line.warn_search_mismatch = TRUE;
- command_line.check_section_addresses = -1;
-+ command_line.poison_system_directories = TRUE;
-+ command_line.error_poison_system_directories = FALSE;
-
- /* We initialize DEMANGLING based on the environment variable
- COLLECT_NO_DEMANGLE. The gcc collect2 program will demangle the
-Index: binutils-2.24/ld/ld.texinfo
-===================================================================
---- binutils-2.24.orig/ld/ld.texinfo 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/ld.texinfo 2013-12-15 11:46:59.813768989 -0800
-@@ -2175,6 +2175,18 @@
+diff --git a/ld/ld.texinfo b/ld/ld.texinfo
+index 502582c..dae168a 100644
+--- a/ld/ld.texinfo
++++ b/ld/ld.texinfo
+@@ -2212,6 +2212,18 @@ string identifying the original linked file does not change.
Passing @code{none} for @var{style} disables the setting from any
@code{--build-id} options earlier on the command line.
@@ -210,10 +185,64 @@ Index: binutils-2.24/ld/ld.texinfo
@end table
@c man end
-Index: binutils-2.24/ld/lexsup.c
-===================================================================
---- binutils-2.24.orig/ld/lexsup.c 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/lexsup.c 2013-12-15 11:49:28.950434490 -0800
+diff --git a/ld/ldfile.c b/ld/ldfile.c
+index 782ed7f..19a9ab4 100644
+--- a/ld/ldfile.c
++++ b/ld/ldfile.c
+@@ -114,6 +114,23 @@ ldfile_add_library_path (const char *name, bfd_boolean cmdline)
+ new_dirs->name = concat (ld_sysroot, name + 1, (const char *) NULL);
+ else
+ new_dirs->name = xstrdup (name);
++
++#ifdef ENABLE_POISON_SYSTEM_DIRECTORIES
++ if (command_line.poison_system_directories
++ && ((!strncmp (name, "/lib", 4))
++ || (!strncmp (name, "/usr/lib", 8))
++ || (!strncmp (name, "/usr/local/lib", 14))
++ || (!strncmp (name, "/usr/X11R6/lib", 14))))
++ {
++ if (command_line.error_poison_system_directories)
++ einfo (_("%X%P: error: library search path \"%s\" is unsafe for "
++ "cross-compilation\n"), name);
++ else
++ einfo (_("%P: warning: library search path \"%s\" is unsafe for "
++ "cross-compilation\n"), name);
++ }
++#endif
++
+ }
+
+ /* Try to open a BFD for a lang_input_statement. */
+diff --git a/ld/ldlex.h b/ld/ldlex.h
+index e3e9b24..29487a3 100644
+--- a/ld/ldlex.h
++++ b/ld/ldlex.h
+@@ -140,6 +140,8 @@ enum option_values
+ OPTION_IGNORE_UNRESOLVED_SYMBOL,
+ OPTION_PUSH_STATE,
+ OPTION_POP_STATE,
++ OPTION_NO_POISON_SYSTEM_DIRECTORIES,
++ OPTION_ERROR_POISON_SYSTEM_DIRECTORIES,
+ };
+
+ /* The initial parser states. */
+diff --git a/ld/ldmain.c b/ld/ldmain.c
+index 818d108..54c49f2 100644
+--- a/ld/ldmain.c
++++ b/ld/ldmain.c
+@@ -266,6 +266,8 @@ main (int argc, char **argv)
+ command_line.warn_mismatch = TRUE;
+ command_line.warn_search_mismatch = TRUE;
+ command_line.check_section_addresses = -1;
++ command_line.poison_system_directories = TRUE;
++ command_line.error_poison_system_directories = FALSE;
+
+ /* We initialize DEMANGLING based on the environment variable
+ COLLECT_NO_DEMANGLE. The gcc collect2 program will demangle the
+diff --git a/ld/lexsup.c b/ld/lexsup.c
+index 4812c97..21b49df 100644
+--- a/ld/lexsup.c
++++ b/ld/lexsup.c
@@ -513,6 +513,14 @@ static const struct ld_option ld_options[] =
{ {"pop-state", no_argument, NULL, OPTION_POP_STATE},
'\0', NULL, N_("Pop state of flags governing input file handling"),
@@ -244,16 +273,6 @@ Index: binutils-2.24/ld/lexsup.c
}
}
-Index: binutils-2.24/ld/ldlex.h
-===================================================================
---- binutils-2.24.orig/ld/ldlex.h 2013-12-15 11:46:17.000000000 -0800
-+++ binutils-2.24/ld/ldlex.h 2013-12-15 11:47:43.230435299 -0800
-@@ -140,6 +140,8 @@ enum option_values
- OPTION_IGNORE_UNRESOLVED_SYMBOL,
- OPTION_PUSH_STATE,
- OPTION_POP_STATE,
-+ OPTION_NO_POISON_SYSTEM_DIRECTORIES,
-+ OPTION_ERROR_POISON_SYSTEM_DIRECTORIES,
- };
-
- /* The initial parser states. */
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/libtool-rpath-fix.patch b/meta/recipes-devtools/binutils/binutils/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch
similarity index 74%
rename from meta/recipes-devtools/binutils/binutils/libtool-rpath-fix.patch
rename to meta/recipes-devtools/binutils/binutils/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch
index 4fcffa4..5451e74 100644
--- a/meta/recipes-devtools/binutils/binutils/libtool-rpath-fix.patch
+++ b/meta/recipes-devtools/binutils/binutils/0010-Fix-rpath-in-libtool-when-sysroot-is-enabled.patch
@@ -1,17 +1,27 @@
-Upstream-Status: Inappropriate [embedded specific]
+From edbee9a68e1c2e11c059668aa1d13001d9f3de06 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:42:38 +0000
+Subject: [PATCH 10/13] Fix rpath in libtool when sysroot is enabled
Enabling sysroot support in libtool exposed a bug where the final
library had an RPATH encoded into it which still pointed to the
sysroot. This works around the issue until it gets sorted out
upstream.
-Fix suggested by Richard Purdie <richard.purdie at linuxfoundation.org>
+Fix suggested by Richard Purdie <richard.purdie at linuxfoundation.org>
+
+Upstream-Status: Inappropriate [embedded specific]
+
Signed-off-by: Scott Garman <scott.a.garman at intel.com>
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ ltmain.sh | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
-Index: binutils-2.22/ltmain.sh
-===================================================================
---- binutils-2.22.orig/ltmain.sh
-+++ binutils-2.22/ltmain.sh
+diff --git a/ltmain.sh b/ltmain.sh
+index 70e856e..11ee684 100644
+--- a/ltmain.sh
++++ b/ltmain.sh
@@ -8035,9 +8035,11 @@ EOF
test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
@@ -37,3 +47,6 @@ Index: binutils-2.22/ltmain.sh
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/mips64-default-ld-emulation.patch b/meta/recipes-devtools/binutils/binutils/0011-Change-default-emulation-for-mips64-linux.patch
similarity index 73%
rename from meta/recipes-devtools/binutils/binutils/mips64-default-ld-emulation.patch
rename to meta/recipes-devtools/binutils/binutils/0011-Change-default-emulation-for-mips64-linux.patch
index e668faa..d9d57ee 100644
--- a/meta/recipes-devtools/binutils/binutils/mips64-default-ld-emulation.patch
+++ b/meta/recipes-devtools/binutils/binutils/0011-Change-default-emulation-for-mips64-linux.patch
@@ -1,15 +1,22 @@
-for mips64*-*-linux we change the default emulations to be
-N64 instead of N32
+From 2a5e8813d3c5db3e2b7d9dfa2ab27cccd5111e53 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:44:14 +0000
+Subject: [PATCH 11/13] Change default emulation for mips64*-*-linux
+
+we change the default emulations to be N64 instead of N32
Upstream-Status: Inappropriate [ OE configuration Specific]
Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ bfd/config.bfd | 8 ++++----
+ ld/configure.tgt | 8 ++++----
+ 2 files changed, 8 insertions(+), 8 deletions(-)
-Index: binutils-2.24/bfd/config.bfd
-===================================================================
---- binutils-2.24.orig/bfd/config.bfd 2013-11-04 07:33:37.000000000 -0800
-+++ binutils-2.24/bfd/config.bfd 2013-12-15 11:54:57.113765374 -0800
-Index: binutils-2.24/ld/configure.tgt
+diff --git a/bfd/config.bfd b/bfd/config.bfd
+index 7bcb92a..03d2c6f 100644
+--- a/bfd/config.bfd
++++ b/bfd/config.bfd
@@ -1062,12 +1062,12 @@ case "${targ}" in
targ_selvecs="mips_elf32_le_vec mips_elf64_be_vec mips_elf64_le_vec mips_ecoff_be_vec mips_ecoff_le_vec"
;;
@@ -27,10 +34,11 @@ Index: binutils-2.24/ld/configure.tgt
;;
mips*el-*-linux*)
targ_defvec=mips_elf32_trad_le_vec
-===================================================================
---- binutils-2.24.orig/ld/configure.tgt 2013-11-26 03:37:33.000000000 -0800
-+++ binutils-2.24/ld/configure.tgt 2013-12-15 11:50:52.273766155 -0800
-@@ -471,11 +471,11 @@
+diff --git a/ld/configure.tgt b/ld/configure.tgt
+index 24e36d1..740b2ea 100644
+--- a/ld/configure.tgt
++++ b/ld/configure.tgt
+@@ -476,11 +476,11 @@ mips*el-*-vxworks*) targ_emul=elf32elmipvxworks
mips*-*-vxworks*) targ_emul=elf32ebmipvxworks
targ_extra_emuls="elf32elmipvxworks" ;;
mips*-*-windiss) targ_emul=elf32mipswindiss ;;
@@ -46,3 +54,6 @@ Index: binutils-2.24/ld/configure.tgt
targ_extra_libpath=$targ_extra_emuls ;;
mips*el-*-linux-*) targ_emul=elf32ltsmip
targ_extra_emuls="elf32btsmip elf32ltsmipn32 elf64ltsmip elf32btsmipn32 elf64btsmip"
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-xlp-support.patch b/meta/recipes-devtools/binutils/binutils/0012-Add-XLP-instructions-support.patch
similarity index 93%
rename from meta/recipes-devtools/binutils/binutils/binutils-xlp-support.patch
rename to meta/recipes-devtools/binutils/binutils/0012-Add-XLP-instructions-support.patch
index b03bb28..c56ff91 100644
--- a/meta/recipes-devtools/binutils/binutils/binutils-xlp-support.patch
+++ b/meta/recipes-devtools/binutils/binutils/0012-Add-XLP-instructions-support.patch
@@ -1,5 +1,7 @@
-Upstream-Status: Unknown
-Signed-off-by: Khem Raj <raj.khem at gmail.com>
+From 448329ea097447aee73d050045295c5a0ae8519e Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem at gmail.com>
+Date: Mon, 2 Mar 2015 01:51:05 +0000
+Subject: [PATCH 12/13] Add XLP instructions support
From 26adb06ce515aadfec08ce13109b4b98287f677b Mon Sep 17 00:00:00 2001
From: Nebu Philips <nphilips at netlogicmicro.com>
@@ -26,6 +28,27 @@ Netlogic. Also, update vendor name to NLM wherever applicable.
opcodes/mips-opc.c | 33 +++++++++++++++++++++------------
15 files changed, 65 insertions(+), 25 deletions(-)
+Upstream-Status: Pending
+
+Signed-off-by: Khem Raj <raj.khem at gmail.com>
+---
+ bfd/aoutx.h | 1 +
+ bfd/archures.c | 1 +
+ bfd/bfd-in2.h | 1 +
+ bfd/config.bfd | 5 +++++
+ bfd/cpu-mips.c | 6 ++++--
+ bfd/elfxx-mips.c | 8 ++++++++
+ binutils/readelf.c | 1 +
+ gas/config/tc-mips.c | 4 +++-
+ gas/configure | 3 +++
+ gas/configure.tgt | 2 +-
+ include/elf/mips.h | 1 +
+ include/opcode/mips.h | 10 ++++++++--
+ ld/configure.tgt | 2 ++
+ opcodes/mips-dis.c | 12 +++++-------
+ opcodes/mips-opc.c | 33 +++++++++++++++++++++------------
+ 15 files changed, 65 insertions(+), 25 deletions(-)
+
diff --git a/bfd/aoutx.h b/bfd/aoutx.h
index 9385a98..a88df99 100644
--- a/bfd/aoutx.h
@@ -63,7 +86,7 @@ index c7a2bb5..413b773 100644
#define bfd_mach_mipsisa32r2 33
#define bfd_mach_mipsisa32r3 34
diff --git a/bfd/config.bfd b/bfd/config.bfd
-index 03d2c6f..91cedb8 100644
+index 03d2c6f..27086db 100644
--- a/bfd/config.bfd
+++ b/bfd/config.bfd
@@ -1041,6 +1041,11 @@ case "${targ}" in
@@ -103,7 +126,7 @@ index b617aaa..19a99d1 100644
/* The default architecture is mips:3000, but with a machine number of
diff --git a/bfd/elfxx-mips.c b/bfd/elfxx-mips.c
-index a0cc26e..672d5b3 100644
+index 0df7abf..d268e86 100644
--- a/bfd/elfxx-mips.c
+++ b/bfd/elfxx-mips.c
@@ -6608,6 +6608,9 @@ _bfd_elf_mips_mach (flagword flags)
@@ -127,7 +150,7 @@ index a0cc26e..672d5b3 100644
case bfd_mach_mipsisa32:
val = E_MIPS_ARCH_32;
break;
-@@ -14753,6 +14760,7 @@ static const struct mips_mach_extension mips_mach_extensions[] =
+@@ -14765,6 +14772,7 @@ static const struct mips_mach_extension mips_mach_extensions[] =
{ bfd_mach_mips_octeonp, bfd_mach_mips_octeon },
{ bfd_mach_mips_octeon, bfd_mach_mipsisa64r2 },
{ bfd_mach_mips_loongson_3a, bfd_mach_mipsisa64r2 },
@@ -177,7 +200,7 @@ index c3e3e2a..8d64344 100644
/* End marker */
{ NULL, 0, 0, 0, 0 }
diff --git a/gas/configure b/gas/configure
-index 9529f1a..63bba5b 100755
+index 074886f..8091f2f 100755
--- a/gas/configure
+++ b/gas/configure
@@ -12808,6 +12808,9 @@ _ACEOF
@@ -191,7 +214,7 @@ index 9529f1a..63bba5b 100755
mips_cpu=r3900
;;
diff --git a/gas/configure.tgt b/gas/configure.tgt
-index 05546ca..bb859d6 100644
+index 1d92f55..06e8b4f 100644
--- a/gas/configure.tgt
+++ b/gas/configure.tgt
@@ -332,7 +332,7 @@ case ${generic_target} in
@@ -204,7 +227,7 @@ index 05546ca..bb859d6 100644
mips-*-openbsd*) fmt=elf em=tmips ;;
diff --git a/include/elf/mips.h b/include/elf/mips.h
-index 2ed6acd..899b1e5 100644
+index 2ed6acd..e541f50 100644
--- a/include/elf/mips.h
+++ b/include/elf/mips.h
@@ -285,6 +285,7 @@ END_RELOC_NUMBERS (R_MIPS_maxext)
@@ -287,7 +310,7 @@ index 1eb1d45..d6881af 100644
/* This entry, mips16, is here only for ISA/processor selection; do
not print its name. */
diff --git a/opcodes/mips-opc.c b/opcodes/mips-opc.c
-index 2c3bbad..86eb95b 100644
+index 2c3bbad..9785a7e 100644
--- a/opcodes/mips-opc.c
+++ b/opcodes/mips-opc.c
@@ -319,7 +319,8 @@ decode_mips_operand (const char *p)
@@ -331,8 +354,7 @@ index 2c3bbad..86eb95b 100644
{"dmt", "", 0x41600bc1, 0xffffffff, TRAP, 0, 0, MT32, 0 },
{"dmt", "t", 0x41600bc1, 0xffe0ffff, WR_1|TRAP, 0, 0, MT32, 0 },
{"dmtc0", "t,G", 0x40a00000, 0xffe007ff, RD_1|WR_C0|WR_CC|CM, 0, I3, 0, EE },
-@@ -1079,6 +1083,8 @@ const struct mips_opcode mips_builtin_opcodes[] =
- /* dmtc2 is at the bottom of the table. */
+@@ -1080,6 +1084,8 @@ const struct mips_opcode mips_builtin_opcodes[] =
/* dmfc3 is at the bottom of the table. */
/* dmtc3 is at the bottom of the table. */
{"dmuh", "d,s,t", 0x000000dc, 0xfc0007ff, WR_1|RD_2|RD_3, 0, I69, 0, 0 },
@@ -340,6 +362,7 @@ index 2c3bbad..86eb95b 100644
+{"dmul", "d,s,t", 0x70000006, 0xfc0007ff, WR_1|RD_2|RD_3, 0, XLP, 0, 0 },
{"dmul", "d,s,t", 0x0000009c, 0xfc0007ff, WR_1|RD_2|RD_3, 0, I69, 0, 0 },
{"dmul", "d,v,t", 0x70000003, 0xfc0007ff, WR_1|RD_2|RD_3|WR_HILO, 0, IOCT, 0, 0 },
+ {"dmul", "d,v,t", 0, (int) M_DMUL, INSN_MACRO, 0, I3, 0, M32|I69 },
@@ -1229,9 +1235,9 @@ const struct mips_opcode mips_builtin_opcodes[] =
{"ld", "s,-b(+R)", 0xec180000, 0xfc1c0000, WR_1, RD_pc, I69, 0, 0 },
{"ld", "t,A(b)", 0, (int) M_LD_AB, INSN_MACRO, 0, I1, 0, 0 },
@@ -400,3 +423,6 @@ index 2c3bbad..86eb95b 100644
{"swc0", "E,o(b)", 0xe0000000, 0xfc000000, RD_3|RD_C0|SM, 0, I1, 0, IOCT|IOCTP|IOCT2|I37 },
{"swc0", "E,A(b)", 0, (int) M_SWC0_AB, INSN_MACRO, 0, I1, 0, IOCT|IOCTP|IOCT2|I37 },
{"swc1", "T,o(b)", 0xe4000000, 0xfc000000, RD_1|RD_3|SM|FP_S, 0, I1, 0, 0 },
+--
+2.1.4
+
diff --git a/meta/recipes-devtools/binutils/binutils/0001-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch b/meta/recipes-devtools/binutils/binutils/0013-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch
similarity index 76%
rename from meta/recipes-devtools/binutils/binutils/0001-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch
rename to meta/recipes-devtools/binutils/binutils/0013-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch
index a47faef..aee01c0 100644
--- a/meta/recipes-devtools/binutils/binutils/0001-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch
+++ b/meta/recipes-devtools/binutils/binutils/0013-Fix-an-internal-error-in-do_print_to_mapfile-seen-wi.patch
@@ -1,8 +1,8 @@
-From 54583eb23233b5369372ae41768655693d0584ef Mon Sep 17 00:00:00 2001
+From 8e8f77ec2b6262e7d10af54700c340173d957267 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem at gmail.com>
Date: Fri, 27 Feb 2015 09:05:49 +0000
-Subject: [PATCH] Fix an internal error in do_print_to_mapfile seen with gold
- on arm
+Subject: [PATCH 13/13] Fix an internal error in do_print_to_mapfile seen with
+ gold on arm
This is due to missing implementation of do_print_to_mapfile for
atrributea section (ARM.attributes), it started to show up after fix
@@ -12,12 +12,11 @@ Signed-off-by: Khem Raj <raj.khem at gmail.com>
Upstream-Status: Submitted
---
- gold/ChangeLog | 5 +++++
gold/attributes.h | 4 ++++
- 2 files changed, 9 insertions(+)
+ 1 file changed, 4 insertions(+)
diff --git a/gold/attributes.h b/gold/attributes.h
-index c0b171f..6e3ab8c 100644
+index 2aa7a78..3d126e6 100644
--- a/gold/attributes.h
+++ b/gold/attributes.h
@@ -387,6 +387,10 @@ class Output_attributes_section_data : public Output_section_data
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-001_ld_makefile_patch.patch b/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-001_ld_makefile_patch.patch
deleted file mode 100644
index c6e1efc..0000000
--- a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-001_ld_makefile_patch.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/sh -e
-## 001_ld_makefile_patch.dpatch
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Description: correct where ld scripts are installed
-## DP: Author: Chris Chimelis <chris at debian.org>
-## DP: Upstream status: N/A
-## DP: Date: ??
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-Upstream-Status: Inappropriate [debian patch]
-
- at DPATCH@
-Index: binutils-2.22/ld/Makefile.am
-===================================================================
---- binutils-2.22.orig/ld/Makefile.am
-+++ binutils-2.22/ld/Makefile.am
-@@ -37,7 +37,7 @@ endif
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-Index: binutils-2.22/ld/Makefile.in
-===================================================================
---- binutils-2.22.orig/ld/Makefile.in
-+++ binutils-2.22/ld/Makefile.in
-@@ -366,7 +366,7 @@ AM_CFLAGS = $(WARN_CFLAGS)
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-006_better_file_error.patch b/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-006_better_file_error.patch
deleted file mode 100644
index 47bd8ff..0000000
--- a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-006_better_file_error.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh -e
-## 006_better_file_error.dpatch by David Kimdon <dwhedon at gordian.com>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Specify which filename is causing an error if the filename is a
-## DP: directory. (#45832)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-Upstream-Status: Inappropriate [debian patch]
-
- at DPATCH@
-Index: binutils-2.22/bfd/opncls.c
-===================================================================
---- binutils-2.22.orig/bfd/opncls.c
-+++ binutils-2.22/bfd/opncls.c
-@@ -197,6 +197,13 @@ bfd_fopen (const char *filename, const c
- {
- bfd *nbfd;
- const bfd_target *target_vec;
-+ struct stat s;
-+
-+ if (stat (filename, &s) == 0)
-+ if (S_ISDIR(s.st_mode)) {
-+ bfd_set_error (bfd_error_file_not_recognized);
-+ return NULL;
-+ }
-
- nbfd = _bfd_new_bfd ();
- if (nbfd == NULL)
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-012_check_ldrunpath_length.patch b/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-012_check_ldrunpath_length.patch
deleted file mode 100644
index d31f80c..0000000
--- a/meta/recipes-devtools/binutils/binutils/binutils-uclibc-300-012_check_ldrunpath_length.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh -e
-## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris at debian.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
-## DP: cases where -rpath isn't specified. (#151024)
-
-if [ $# -ne 1 ]; then
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1
-fi
-
-[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
-patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
-
-case "$1" in
- -patch) patch $patch_opts -p1 < $0;;
- -unpatch) patch $patch_opts -p1 -R < $0;;
- *)
- echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
- exit 1;;
-esac
-
-exit 0
-Upstream-Status: Inappropriate [debian patch]
-
- at DPATCH@
-Index: binutils-2.22/ld/emultempl/elf32.em
-===================================================================
---- binutils-2.22.orig/ld/emultempl/elf32.em
-+++ binutils-2.22/ld/emultempl/elf32.em
-@@ -1273,6 +1273,8 @@ fragment <<EOF
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -1500,6 +1502,8 @@ gld${EMULATION_NAME}_before_allocation (
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
-
- for (abfd = link_info.input_bfds; abfd; abfd = abfd->link_next)
- if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
diff --git a/meta/recipes-devtools/binutils/binutils/binutils-uninitialised-warning.patch b/meta/recipes-devtools/binutils/binutils/binutils-uninitialised-warning.patch
deleted file mode 100644
index 2feb80c..0000000
--- a/meta/recipes-devtools/binutils/binutils/binutils-uninitialised-warning.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From f9c316c4d75be236bbaa8464ef803ed2d3859d6d Mon Sep 17 00:00:00 2001
-From: H.J. Lu <hjl.tools at gmail.com>
-Date: Wed, 15 Jan 2014 07:43:19 -0800
-Subject: [PATCH 1/1] Silence uninitialized warning on ehdr_start_save
-
-Older GCC, like 4.1/4.2, will issue an uninitialized warning on
-ehdr_start_save. This patch silences by using
-
-struct bfd_link_hash_entry ehdr_start_save = ehdr_start_save;
-
- * emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
- Silence uninitialized warning on ehdr_start_save with older
- GCC.
-
-Upstream-Status: Backport
----
- ld/ChangeLog | 6 ++++++
- ld/emultempl/elf32.em | 2 +-
- 2 files changed, 7 insertions(+), 1 deletions(-)
-
-#diff --git a/ld/ChangeLog b/ld/ChangeLog
-#index eaa6b93..91055de 100644
-#--- a/ld/ChangeLog
-#+++ b/ld/ChangeLog
-#@@ -1,3 +1,9 @@
-#+2014-01-15 H.J. Lu <hongjiu.lu at intel.com>
-#+
-#+ * emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
-#+ Silence uninitialized warning on ehdr_start_save with older
-#+ GCC.
-#+
-# 2014-01-15 Alan Modra <amodra at gmail.com>
-#
-# * emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Define
-diff --git a/ld/emultempl/elf32.em b/ld/emultempl/elf32.em
-index 13f86f0..569c7f7 100644
---- a/ld/emultempl/elf32.em
-+++ b/ld/emultempl/elf32.em
-@@ -1481,7 +1481,7 @@ gld${EMULATION_NAME}_before_allocation (void)
- asection *sinterp;
- bfd *abfd;
- struct elf_link_hash_entry *ehdr_start = NULL;
-- struct bfd_link_hash_entry ehdr_start_save;
-+ struct bfd_link_hash_entry ehdr_start_save = ehdr_start_save;
-
- if (is_elf_hash_table (link_info.hash))
- {
---
-1.7.1
-
--
2.1.4
More information about the Openembedded-core
mailing list