[OE-core] [PATCH 7/8] kernel: Add basic fitImage support
Marek Vasut
marex at denx.de
Tue Apr 28 16:38:35 UTC 2015
This patch adds support for generating a kernel fitImage, which is
a a successor to the uImage format. Unlike uImage, which could only
contain the kernel image itself, the fitImage can contain all kinds
of artifacts, like the kernel image, device tree blobs, initramfs
images, binary firmwares etc. Furthermore, the fitImage supports
different kinds of checksums, not only CRC32 like the uImage did.
Last, but not least, fitImage supports signatures such that either
the whole image or it's parts can be signed and then in turn can
be verified by the bootloader.
So far we only add support for wrapping the kernel image and DTB
into the fitImage. The fitImage uses the sha1 checksum, which is
the default.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Richard Purdie <richard.purdie at linuxfoundation.org>
Cc: Koen Kooi <koen at dominion.thruhere.net>
Cc: Paul Eggleton <paul.eggleton at linux.intel.com>
Cc: Ross Burton <ross.burton at intel.com>
Cc: Bruce Ashfield <bruce.ashfield at windriver.com>
---
meta/classes/kernel-fitimage.bbclass | 234 +++++++++++++++++++++++++++++++++++
meta/classes/kernel.bbclass | 1 +
2 files changed, 235 insertions(+)
create mode 100644 meta/classes/kernel-fitimage.bbclass
diff --git a/meta/classes/kernel-fitimage.bbclass b/meta/classes/kernel-fitimage.bbclass
new file mode 100644
index 0000000..2a56a54
--- /dev/null
+++ b/meta/classes/kernel-fitimage.bbclass
@@ -0,0 +1,234 @@
+inherit kernel-uboot
+
+python __anonymous () {
+ kerneltype = d.getVar('KERNEL_IMAGETYPE', True)
+ if kerneltype == 'fitImage':
+ depends = d.getVar("DEPENDS", True)
+ depends = "%s u-boot-mkimage-native dtc-native" % depends
+ d.setVar("DEPENDS", depends)
+
+ # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal
+ # to kernel.bbclass . We have to override it, since we pack zImage
+ # (at least for now) into the fitImage .
+ d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", "zImage")
+
+ image = d.getVar('INITRAMFS_IMAGE', True)
+ if image:
+ d.appendVarFlag('do_assemble_fitimage', 'depends', ' ${INITRAMFS_IMAGE}:do_rootfs')
+}
+
+#
+# Emit the fitImage ITS header
+#
+fitimage_emit_fit_header() {
+ cat << EOF >> fit-image.its
+/dts-v1/;
+
+/ {
+ description = "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}";
+ #address-cells = <1>;
+EOF
+}
+
+#
+# Emit the fitImage section bits
+#
+# $1 ... Section bit type: imagestart - image section start
+# confstart - configuration section start
+# sectend - section end
+# fitend - fitimage end
+#
+fitimage_emit_section_maint() {
+ case $1 in
+ imagestart)
+ cat << EOF >> fit-image.its
+
+ images {
+EOF
+ ;;
+ confstart)
+ cat << EOF >> fit-image.its
+
+ configurations {
+EOF
+ ;;
+ sectend)
+ cat << EOF >> fit-image.its
+ };
+EOF
+ ;;
+ fitend)
+ cat << EOF >> fit-image.its
+};
+EOF
+ ;;
+ esac
+}
+
+#
+# Emit the fitImage ITS kernel section
+#
+# $1 ... Image counter
+# $2 ... Path to kernel image
+# $3 ... Compression type
+fitimage_emit_section_kernel() {
+
+ kernel_csum="sha1"
+
+ ENTRYPOINT=${UBOOT_ENTRYPOINT}
+ if test -n "${UBOOT_ENTRYSYMBOL}"; then
+ ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
+ awk '$3=="${UBOOT_ENTRYSYMBOL}" {print $1}'`
+ fi
+
+ cat << EOF >> fit-image.its
+ kernel@${1} {
+ description = "Linux kernel";
+ data = /incbin/("${2}");
+ type = "kernel";
+ arch = "${UBOOT_ARCH}";
+ os = "linux";
+ compression = "${3}";
+ load = <${UBOOT_LOADADDRESS}>;
+ entry = <${ENTRYPOINT}>;
+ hash at 1 {
+ algo = "${kernel_csum}";
+ };
+ };
+EOF
+}
+
+#
+# Emit the fitImage ITS DTB section
+#
+# $1 ... Image counter
+# $2 ... Path to DTB image
+fitimage_emit_section_dtb() {
+
+ dtb_csum="sha1"
+
+ cat << EOF >> fit-image.its
+ fdt@${1} {
+ description = "Flattened Device Tree blob";
+ data = /incbin/("${2}");
+ type = "flat_dt";
+ arch = "${UBOOT_ARCH}";
+ compression = "none";
+ hash at 1 {
+ algo = "${dtb_csum}";
+ };
+ };
+EOF
+}
+
+#
+# Emit the fitImage ITS configuration section
+#
+# $1 ... Linux kernel ID
+# $2 ... DTB image ID
+fitimage_emit_section_config() {
+
+ conf_csum="sha1"
+
+ # Test if we have any DTBs at all
+ if [ -z "${2}" ] ; then
+ conf_desc="Boot Linux kernel"
+ fdt_line=""
+ else
+ conf_desc="Boot Linux kernel with FDT blob"
+ fdt_line="fdt = \"fdt@${2}\";"
+ fi
+ kernel_line="kernel = \"kernel@${1}\";"
+
+ cat << EOF >> fit-image.its
+ default = "conf at 1";
+ conf at 1 {
+ description = "${conf_desc}";
+ ${kernel_line}
+ ${fdt_line}
+ hash at 1 {
+ algo = "${conf_csum}";
+ };
+ };
+EOF
+}
+
+do_assemble_fitimage() {
+ if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then
+ kernelcount=1
+ dtbcount=""
+ rm -f fit-image.its
+
+ fitimage_emit_fit_header
+
+ #
+ # Step 1: Prepare a kernel image section.
+ #
+ fitimage_emit_section_maint imagestart
+
+ uboot_prep_kimage
+ fitimage_emit_section_kernel "${kernelcount}" linux.bin "${linux_comp}"
+
+ #
+ # Step 2: Prepare a DTB image section
+ #
+ if test -n "${KERNEL_DEVICETREE}"; then
+ dtbcount=1
+ for DTB in ${KERNEL_DEVICETREE}; do
+ if echo ${DTB} | grep -q '/dts/'; then
+ bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
+ DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
+ fi
+ DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
+ if [ ! -e "${DTB_PATH}" ]; then
+ DTB_PATH="arch/${ARCH}/boot/${DTB}"
+ fi
+
+ fitimage_emit_section_dtb ${dtbcount} ${DTB_PATH}
+ dtbcount=`expr ${dtbcount} + 1`
+ done
+ fi
+
+ fitimage_emit_section_maint sectend
+
+ # Force the first Kernel and DTB in the default config
+ kernelcount=1
+ dtbcount=1
+
+ #
+ # Step 3: Prepare a configurations section
+ #
+ fitimage_emit_section_maint confstart
+
+ fitimage_emit_section_config ${kernelcount} ${dtbcount}
+
+ fitimage_emit_section_maint sectend
+
+ fitimage_emit_section_maint fitend
+
+ #
+ # Step 4: Assemble the image
+ #
+ uboot-mkimage -f fit-image.its arch/${ARCH}/boot/fitImage
+ fi
+}
+
+addtask assemble_fitimage before do_install after do_compile
+
+kernel_do_deploy_append() {
+ # Update deploy directory
+ if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then
+ cd ${B}
+ echo "Copying fit-image.its source file..."
+ its_base_name="${KERNEL_IMAGETYPE}-its-${PV}-${PR}-${MACHINE}-${DATETIME}"
+ its_symlink_name=${KERNEL_IMAGETYPE}-its-${MACHINE}
+ install -m 0644 fit-image.its ${DEPLOYDIR}/${its_base_name}.its
+ linux_bin_base_name="${KERNEL_IMAGETYPE}-linux.bin-${PV}-${PR}-${MACHINE}-${DATETIME}"
+ linux_bin_symlink_name=${KERNEL_IMAGETYPE}-linux.bin-${MACHINE}
+ install -m 0644 linux.bin ${DEPLOYDIR}/${linux_bin_base_name}.bin
+
+ cd ${DEPLOYDIR}
+ ln -sf ${its_base_name}.its ${its_symlink_name}.its
+ ln -sf ${linux_bin_base_name}.bin ${linux_bin_symlink_name}.bin
+ fi
+}
diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
index 9723be2..02a5838 100644
--- a/meta/classes/kernel.bbclass
+++ b/meta/classes/kernel.bbclass
@@ -45,6 +45,7 @@ python __anonymous () {
# original behavior of kernel.bbclass, so no meta-layers should get
# broken.
inherit kernel-uimage
+inherit kernel-fitimage
# Old style kernels may set ${S} = ${WORKDIR}/git for example
# We need to move these over to STAGING_KERNEL_DIR. We can't just
--
2.1.4
More information about the Openembedded-core
mailing list