[OE-core] [PATCH 08/10] init-install: Specify partition name in parted command line

[Ed Bartosh]

parted allows to use names for partitions if GPT partition table
is used on the device. msdos partitioning can have only partition
types: 'primary', 'logical' or 'extended'.

Used meaningful partition names in parted command line for GPT
partitioning.

Signed-off-by: Ed Bartosh <ed.bartosh at linux.intel.com>

diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
index 7f3e889..a6a8679 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
@@ -134,14 +134,14 @@ echo "Creating new partition table on /dev/${device} ..."
 parted /dev/${device} mklabel gpt
 
 echo "Creating boot partition on $bootfs"
-parted /dev/${device} mkpart primary fat32 0% $boot_size
+parted /dev/${device} mkpart boot fat32 0% $boot_size
 parted /dev/${device} set 1 boot on
 
 echo "Creating rootfs partition on $rootfs"
-parted /dev/${device} mkpart primary ext3 $rootfs_start $rootfs_end
+parted /dev/${device} mkpart root ext3 $rootfs_start $rootfs_end
 
 echo "Creating swap partition on $swap"
-parted /dev/${device} mkpart primary linux-swap $swap_start 100%
+parted /dev/${device} mkpart swap linux-swap $swap_start 100%
 
 parted /dev/${device} print
 
diff --git a/meta/recipes-core/initrdscripts/files/init-install.sh b/meta/recipes-core/initrdscripts/files/init-install.sh
index ee191a4..2c5d530 100644
--- a/meta/recipes-core/initrdscripts/files/init-install.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install.sh
@@ -163,17 +163,19 @@ if [ $grub_version -eq 0 ] ; then
 else
     parted /dev/${device} mktable gpt
     echo "Creating BIOS boot partition on $bios_boot"
-    parted /dev/${device} mkpart primary 0% $bios_boot_size
+    parted /dev/${device} mkpart bios_boot 0% $bios_boot_size
     parted /dev/${device} set 1 bios_grub on
     echo "Creating boot partition on $bootfs"
-    parted /dev/${device} mkpart primary ext3 $boot_start $boot_size
+    parted /dev/${device} mkpart boot ext3 $boot_start $boot_size
 fi
 
 echo "Creating rootfs partition on $rootfs"
-parted /dev/${device} mkpart primary ext3 $rootfs_start $rootfs_end
+[ $grub_version -eq 0 ] && pname='primary' || pname='root'
+parted /dev/${device} mkpart $pname ext3 $rootfs_start $rootfs_end
 
 echo "Creating swap partition on $swap"
-parted /dev/${device} mkpart primary linux-swap $swap_start 100%
+[ $grub_version -eq 0 ] && pname='primary' || pname='swap'
+parted /dev/${device} mkpart $pname linux-swap $swap_start 100%
 
 parted /dev/${device} print
 
-- 
2.1.4