[OE-core] [PATCH] mkefidisk: Create interactive menu for the script
Saul Wold
sgw at linux.intel.com
Wed Sep 9 21:36:12 UTC 2015
On 09/08/2015 09:53 AM, Bottazzini, Bruno wrote:
> On Tue, 2015-09-08 at 08:15 -0700, Saul Wold wrote:
>> On 09/04/2015 03:19 PM, Bruno Bottazzini wrote:
>>> If it is passed only the image parameter, it will show some interactive
>>> options to help to conclude the script.
>>>
>>> With this patch it will detect devices available in the machine, asking
>>> to choose what it is wanted to be flashed.
>>>
>>> it will suggest the target device. If it is a SD card the suggestion
>>> is /dev/mmcblk0. If it is a pendrive it will suggest to use /dev/sda.
>>>
>>> Signed-off-by: Bruno Bottazzini <bruno.bottazzini at intel.com>
>>> ---
>>> scripts/contrib/mkefidisk.sh | 63 ++++++++++++++++++++++++++++++++++++++++----
>>> 1 file changed, 58 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/scripts/contrib/mkefidisk.sh b/scripts/contrib/mkefidisk.sh
>>> index 55f72b0..66e0e58 100755
>>> --- a/scripts/contrib/mkefidisk.sh
>>> +++ b/scripts/contrib/mkefidisk.sh
>>> @@ -152,8 +152,55 @@ unmount() {
>>> # Parse and validate arguments
>>> #
>>> if [ $# -lt 3 ] || [ $# -gt 4 ]; then
>>> - usage
>>> - exit 1
>>> + if [ $# -eq 1 ]; then
>>> + AVAILABLE_DISK=`lsblk | grep "disk" | cut -f 1 -d " "`
>>> + X=0
>>> + for disk in `echo $AVAILABLE_DISK`; do
>>> + mounted=`blkid -o list | grep "/dev/$disk" | grep "not mounted"`
>> Is there any way to not call blkid multiple time (ie save the output and
>> use it once?
>
> Unfortunately no, both outputs are different.
>
not sure I follow the fact that blkid has different output formats when
called multiple times inside the "for disk" loop. Are you saying the
output of blkid changes each time the for loop is iterated?
>>
>>
>> Are the lsblk and blkid commands guaranteed to be installed on most
>> machines?
>
> I double checked it before sending this patch and the answer was yes.
>
>>
>> Also this seems to have matched my root disk, which again concerns me, I
>> am still not convinced that a selection system like this is safe.
>
> This is odd. My output shows only unmounted disks.
>
Which shell are you using?
>>
>>> + if [ -n "$mounted" ]; then
>>> + UNMOUNTED_AVAILABLES="$UNMOUNTED_AVAILABLES /dev/$disk\n"
>>
>> I think the \n is not needed here, what shell are you using, with Bash I
>> get the following output:
>>
>> 0 - /dev/sda
>> 1 - /dev/sdb
>> 2 - /dev/mmcblk0
>> Choose unmounted device number: 1
>
> This output is strange mine shows only (without sda and sdb which i do
> have them also, but mounted):
> contrib > ./mkefidisk.sh image
> 0 - /dev/mmcblk0
> Choose unmounted device number:
>
> Are you sure you have updated the script with the changes? What distro
> are you using?
>
I am running on Fedora and Ubuntu, both have this issue.
I am still concerned about the safety of offering up disks that might
not be valid.
Since you have not changed this for V3, I don't think it's a good change
at this point.
Sau!
>>
>> Choose a name of the device that will be boot from
>> Recommended name is: /dev/sda\n
>> Is target device okay? [y/N]: y
>>
>> Usage: mkefidisk.sh [-v] DEVICE HDDIMG TARGET_DEVICE
>> -v: Verbose debug
>> DEVICE: The device to write the image to, e.g. /dev/sdh
>> HDDIMG: The hddimg file to generate the efi disk from
>> TARGET_DEVICE: The device the target will boot from, e.g.
>> /dev/mmcblk0
>> Device /dev/sdb\n cannot be found
>>
>> Note the \n above in the choose a name and then the trailing \n here
>> with the device not being found.
>
> You are right I am removing \n. Strangely here it works perfectly:
> 0 - /dev/sdc
> 1 - /dev/mmcblk0
> Choose unmounted device number: 1
>
> Choose a name of the device that will be boot from
> Recommended name is: /dev/mmcblk0
> Is target device okay? [y/N]: y
>
>
>>
>>
>>
>>> + info "$X - /dev/$disk"
>>> + X=`expr $X + 1`
>>> + fi
>>> + done
>>> + if [ $X -eq 0 ]; then
>>> + die "No unmounted device found."
>>> + fi
>>> + read -p "Choose unmounted device number: " DISK_NUMBER
>>> + X=0
>>> + for line in `echo $UNMOUNTED_AVAILABLES`; do
>>> + if [ $DISK_NUMBER -eq $X ]; then
>>> + DISK_TO_BE_FLASHED=$line
>>> + break
>>> + else
>>> + X=`expr $X + 1`
>>> + fi
>>> + done
>>> + if [ -z "$DISK_TO_BE_FLASHED" ]; then
>>> + die "Option \"$DISK_NUMBER\" is invalid. Choose a valid option"
>>> + else
>>> + if [ -z `echo $DISK_TO_BE_FLASHED | grep "mmc"` ]; then
>>> + TARGET_TO_BE_BOOT="/dev/sda"
>>> + else
>>> + TARGET_TO_BE_BOOT="/dev/mmcblk0"
>>> + fi
>>> + fi
>>> + echo ""
>>> + echo "Choose a name of the device that will be boot from"
>>> + echo -n "Recommended name is: "
>>> + info "$TARGET_TO_BE_BOOT\n"
>>
>> You are still outputting the \n here
>
> Removed too
>
> Thank you a lot,
>
> Bruno
>
>>
>>> + read -p "Is target device okay? [y/N]: " RESPONSE
>>> + if [ "$RESPONSE" != "y" ]; then
>>> + read -p "Choose target device name: " TARGET_TO_BE_BOOT
>>> + fi
>>> + echo ""
>>> + if [ -z "$TARGET_TO_BE_BOOT" ]; then
>>> + die "Error: choose a valid target name"
>>> + fi
>>> + else
>>> + usage
>>> + exit 1
>>> + fi
>>> fi
>>>
>>> if [ "$1" = "-v" ]; then
>>> @@ -162,9 +209,15 @@ if [ "$1" = "-v" ]; then
>>> shift
>>> fi
>>>
>>> -DEVICE=$1
>>> -HDDIMG=$2
>>> -TARGET_DEVICE=$3
>>> +if [ -z "$AVAILABLE_DISK" ]; then
>>> + DEVICE=$1
>>> + HDDIMG=$2
>>> + TARGET_DEVICE=$3
>>> +else
>>> + DEVICE=$DISK_TO_BE_FLASHED
>>> + HDDIMG=$1
>>> + TARGET_DEVICE=$TARGET_TO_BE_BOOT
>>> +fi
>>>
>> This change I like, if done with checking for 2 parameter (image and
>> disk to flash, the 3 paramter can be determined as you have with best
>> guess of /dev/sda if it's an sd and mmc if it's a /dev/mmc flash device.
>>
>> Sau!
>>
>>
>>> LINK=$(readlink $DEVICE)
>>> if [ $? -eq 0 ]; then
>>>
>
>
>
More information about the Openembedded-core
mailing list