[OE-core] [PATCH V3 8/8] runqemu: refactor it and remove machine knowledge
Robert Yang
liezhi.yang at windriver.com
Fri Aug 19 06:55:29 UTC 2016
Previously, runqemu had hard coded machine knowledge, which limited its
usage, for example, qemu can boot genericx86, but runqemu can't, we need
edit runqemu/runqemu-internal a lot if we want to boot genericx86.
Now bsp conf files can set vars to make it can be boot by runqemu, and
qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.py.
Please see qemuboot.bbclass' comments on how to set the vars.
* Re-write it in python3, which can reduce lines from 1239 to about 750
lines
* All the machine knowledges are gone
* Most of the TUN_ARCH knowledge are gone except aarch64 and powerpc,
it's not easy to remove the two, so leave them there atm
* All the previous options are preserved, and there is a new way to run
runqemu: (it doesn't need run "bitake -e" in such a case)
$ runqemu tmp/deploy/images/qemux86
or:
$ runqemu tmp/deploy/images/qemuarm/<image>.ext4
or:
$ runqemu tmp/deploy/images/qemuarm/qemuboot.py
* Fixed audio support, not limited on x86 or x86_64
* Fix SLIRP mode, add help message, avoid mixing with tap
* Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to
DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after
stop.
* More bsps can be boot, such as genericx86 and genericx86-64.
* The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to
meta-xilinx' mailing list.
* I can't find any qemush4 bsp or how to build it, so it is not
considered atm.
[YOCTO #1018]
[YOCTO #4827]
[YOCTO #7459]
[YOCTO #7887]
Signed-off-by: Robert Yang <liezhi.yang at windriver.com>
---
scripts/runqemu | 1260 +++++++++++++++++++++++++++-------------------
scripts/runqemu-internal | 739 ---------------------------
2 files changed, 735 insertions(+), 1264 deletions(-)
delete mode 100755 scripts/runqemu-internal
diff --git a/scripts/runqemu b/scripts/runqemu
index d52ea15..3fd7034 100755
--- a/scripts/runqemu
+++ b/scripts/runqemu
@@ -1,8 +1,9 @@
-#!/bin/bash
-#
+#!/usr/bin/env python3
+
# Handle running OE images standalone with QEMU
#
# Copyright (C) 2006-2011 Linux Foundation
+# Copyright (c) 2016 Wind River Systems, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
@@ -17,536 +18,745 @@
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-usage() {
- MYNAME=`basename $0`
-cat <<_EOF
+import os
+import sys
+import logging
+import subprocess
+import re
+import fcntl
+import shutil
+
+def create_logger():
+ logger = logging.getLogger('runqemu')
+ logger.setLevel(logging.INFO)
+
+ # create console handler and set level to debug
+ ch = logging.StreamHandler()
+ ch.setLevel(logging.INFO)
+
+ # create formatter
+ formatter = logging.Formatter('%(name)s - %(levelname)s - %(message)s')
+
+ # add formatter to ch
+ ch.setFormatter(formatter)
+
+ # add ch to logger
+ logger.addHandler(ch)
+
+ return logger
+
+logger = create_logger()
+def print_usage():
+ print("""
Usage: you can run this script with any valid combination
of the following environment variables (in any order):
KERNEL - the kernel image file to use
ROOTFS - the rootfs image file or nfsroot directory to use
MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)
Simplified QEMU command-line options can be passed with:
- nographic - disables video console
- serial - enables a serial console on /dev/ttyS0
- kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required)
- kvm-vhost - enables KVM with vhost support when running qemux86/qemux86-64 (VT-capable CPU required)
+ nographic - disable video console
+ serial - enable a serial console on /dev/ttyS0
+ slirp - enable user networking, no root privileges is required
+ kvm - enable KVM when running x86/x86_64 (VT-capable CPU required)
+ kvm-vhost - enable KVM with vhost when running x86/x86_64 (VT-capable CPU required)
publicvnc - enable a VNC server open to all hosts
- qemuparams="xyz" - specify custom parameters to QEMU
- bootparams="xyz" - specify custom kernel parameters during boot
+ audio - enable audio
+ tcpserial=<port> - specify tcp serial port number
+ biosdir=<dir> - specify custom bios dir
+ biosfilename=<filename> - specify bios filename
+ qemuparams=<xyz> - specify custom parameters to QEMU
+ bootparams=<xyz> - specify custom kernel parameters during boot
+ help: print this text
Examples:
- $MYNAME qemuarm
- $MYNAME qemux86-64 core-image-sato ext4
- $MYNAME qemux86-64 wic-image-minimal wic
- $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial
- $MYNAME qemux86 iso/hddimg/vmdk/qcow2/vdi/ramfs/cpio.gz...
- $MYNAME qemux86 qemuparams="-m 256"
- $MYNAME qemux86 bootparams="psplash=false"
- $MYNAME path/to/<image>-<machine>.vmdk
- $MYNAME path/to/<image>-<machine>.wic
-_EOF
- exit 1
-}
-
-if [ "x$1" = "x" ]; then
- usage
-fi
-
-error() {
- echo "Error: "$*
- usage
-}
-
-MACHINE=${MACHINE:=""}
-KERNEL=${KERNEL:=""}
-ROOTFS=${ROOTFS:=""}
-FSTYPE=${FSTYPE:=""}
-LAZY_ROOTFS=""
-SCRIPT_QEMU_OPT=""
-SCRIPT_QEMU_EXTRA_OPT=""
-SCRIPT_KERNEL_OPT=""
-SERIALSTDIO=""
-TCPSERIAL_PORTNUM=""
-KVM_ENABLED="no"
-KVM_ACTIVE="no"
-VHOST_ENABLED="no"
-VHOST_ACTIVE="no"
-IS_VM="false"
-
-# Determine whether the file is a kernel or QEMU image, and set the
-# appropriate variables
-process_filename() {
- filename=$1
-
- # Extract the filename extension
- EXT=`echo $filename | awk -F . '{ print \$NF }'`
- case /$EXT/ in
- /bin/)
- # A file ending in .bin is a kernel
- [ -z "$KERNEL" ] && KERNEL=$filename || \
- error "conflicting KERNEL args [$KERNEL] and [$filename]"
- ;;
- /ext[234]/|/jffs2/|/btrfs/)
- # A file ending in a supportted fs type is a rootfs image
- if [ -z "$FSTYPE" -o "$FSTYPE" = "$EXT" ]; then
- FSTYPE=$EXT
- ROOTFS=$filename
- else
- error "conflicting FSTYPE types [$FSTYPE] and [$EXT]"
- fi
- ;;
- /hddimg/|/hdddirect/|/vmdk/|/wic/|/qcow2/|/vdi/)
- FSTYPE=$EXT
- VM=$filename
- ROOTFS=$filename
- IS_VM="true"
- ;;
- *)
- error "unknown file arg [$filename]"
- ;;
- esac
-}
-
-check_fstype_conflicts() {
- if [ -z "$FSTYPE" -o "$FSTYPE" = "$1" ]; then
- FSTYPE=$1
- else
- error "conflicting FSTYPE types [$FSTYPE] and [$1]"
- fi
-}
-# Parse command line args without requiring specific ordering. It's a
-# bit more complex, but offers a great user experience.
-while true; do
- arg=${1}
- case "$arg" in
- "qemux86" | "qemux86-64" | "qemuarm" | "qemuarm64" | "qemumips" | "qemumipsel" | \
- "qemumips64" | "qemush4" | "qemuppc" | "qemumicroblaze" | "qemuzynq" | "qemuzynqmp")
- [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \
- error "conflicting MACHINE types [$MACHINE] and [$arg]"
- ;;
- "ext"[234] | "jffs2" | "nfs" | "btrfs")
- check_fstype_conflicts $arg
- ;;
- "hddimg" | "hdddirect" | "wic" | "vmdk" | "qcow2" | "vdi" | "iso")
- check_fstype_conflicts $arg
- IS_VM="true"
- ;;
- "ramfs" | "cpio.gz")
- FSTYPE=cpio.gz
- ;;
- "nographic")
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -nographic"
- SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0"
- ;;
- "serial")
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -serial stdio"
- SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0"
- SERIALSTDIO="1"
- ;;
- "tcpserial="*)
- TCPSERIAL_PORTNUM=${arg##tcpserial=}
- ;;
- "biosdir="*)
- CUSTOMBIOSDIR="${arg##biosdir=}"
- ;;
- "biosfilename="*)
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -bios ${arg##biosfilename=}"
- ;;
- "qemuparams="*)
- SCRIPT_QEMU_EXTRA_OPT="${arg##qemuparams=}"
-
- # Warn user if they try to specify serial or kvm options
- # to use simplified options instead
- serial_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-serial\)'`
- kvm_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-enable-kvm\)'`
- vga_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-vga\)'`
- [ ! -z "$serial_option" -o ! -z "$kvm_option" ] && \
- echo "Please use simplified serial or kvm options instead"
- ;;
- "bootparams="*)
- SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT ${arg##bootparams=}"
- ;;
- "audio")
- if [ "x$MACHINE" = "xqemux86" -o "x$MACHINE" = "xqemux86-64" ]; then
- echo "Enabling audio in qemu."
- echo "Please install snd_intel8x0 or snd_ens1370 driver in linux guest."
- QEMU_AUDIO_DRV="alsa"
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -soundhw ac97,es1370"
- fi
- ;;
- "kvm")
- KVM_ENABLED="yes"
- KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1`
- ;;
- "kvm-vhost")
- KVM_ENABLED="yes"
- KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1`
- VHOST_ENABLED="yes"
- ;;
- "slirp")
- SLIRP_ENABLED="yes"
- ;;
- "publicvnc")
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -vnc :0"
- ;;
- *-image*)
- [ -z "$ROOTFS" ] || \
- error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
- if [ -f "$arg" ]; then
- process_filename $arg
- elif [ -d "$arg" ]; then
- # Handle the case where the nfsroot dir has -image-
- # in the pathname
- echo "Assuming $arg is an nfs rootfs"
- FSTYPE=nfs
- ROOTFS=$arg
- else
- ROOTFS=$arg
- LAZY_ROOTFS="true"
- fi
- ;;
- "") break ;;
- *)
- # A directory name is an nfs rootfs
- if [ -d "$arg" ]; then
- echo "Assuming $arg is an nfs rootfs"
- if [ -z "$FSTYPE" -o "$FSTYPE" = "nfs" ]; then
- FSTYPE=nfs
- else
- error "conflicting FSTYPE types [$arg] and nfs"
- fi
-
- if [ -z "$ROOTFS" ]; then
- ROOTFS=$arg
- else
- error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
- fi
- elif [ -f "$arg" ]; then
- process_filename $arg
- else
- error "unable to classify arg [$arg]"
- fi
- ;;
- esac
- shift
-done
-
-if [ ! -c /dev/net/tun ] ; then
- echo "TUN control device /dev/net/tun is unavailable; you may need to enable TUN (e.g. sudo modprobe tun)"
- exit 1
-elif [ ! -w /dev/net/tun ] ; then
- echo "TUN control device /dev/net/tun is not writable, please fix (e.g. sudo chmod 666 /dev/net/tun)"
- exit 1
-fi
-
-# Report errors for missing combinations of options
-if [ -z "$MACHINE" -a -z "$KERNEL" -a -z "$VM" -a "$FSTYPE" != "wic" ]; then
- error "you must specify at least a MACHINE or KERNEL argument"
-fi
-if [ "$FSTYPE" = "nfs" -a -z "$ROOTFS" ]; then
- error "NFS booting without an explicit ROOTFS path is not yet supported"
-fi
-
-if [ -z "$MACHINE" ]; then
- if [ "$IS_VM" = "true" ]; then
- [ "x$FSTYPE" = "xwic" ] && filename=$ROOTFS || filename=$VM
- MACHINE=`basename $filename | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'`
- if [ -z "$MACHINE" ]; then
- error "Unable to set MACHINE from image filename [$VM]"
- fi
- echo "Set MACHINE to [$MACHINE] based on image [$VM]"
- else
- MACHINE=`basename $KERNEL | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'`
- if [ -z "$MACHINE" ]; then
- error "Unable to set MACHINE from kernel filename [$KERNEL]"
- fi
- echo "Set MACHINE to [$MACHINE] based on kernel [$KERNEL]"
- fi
-fi
-
-YOCTO_KVM_WIKI="https://wiki.yoctoproject.org/wiki/How_to_enable_KVM_for_Poky_qemu"
-YOCTO_PARAVIRT_KVM_WIKI="https://wiki.yoctoproject.org/wiki/Running_an_x86_Yocto_Linux_image_under_QEMU_KVM"
-# Detect KVM configuration
-if [ "x$KVM_ENABLED" = "xyes" ]; then
- if [ -z "$KVM_CAPABLE" ]; then
- echo "You are trying to enable KVM on a cpu without VT support."
- echo "Remove kvm from the command-line, or refer"
- echo "$YOCTO_KVM_WIKI";
- exit 1;
- fi
- if [ "x$MACHINE" != "xqemux86" -a "x$MACHINE" != "xqemux86-64" ]; then
- echo "KVM only support x86 & x86-64. Remove kvm from the command-line";
- exit 1;
- fi
- if [ ! -e /dev/kvm ]; then
- echo "Missing KVM device. Have you inserted kvm modules?"
- echo "For further help see:"
- echo "$YOCTO_KVM_WIKI";
- exit 1;
- fi
- if [ -w /dev/kvm -a -r /dev/kvm ]; then
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -enable-kvm"
- KVM_ACTIVE="yes"
- else
- echo "You have no rights on /dev/kvm."
- echo "Please change the ownership of this file as described at:"
- echo "$YOCTO_KVM_WIKI";
- exit 1;
- fi
- if [ "x$VHOST_ENABLED" = "xyes" ]; then
- if [ ! -e /dev/vhost-net ]; then
- echo "Missing virtio net device. Have you inserted vhost-net module?"
- echo "For further help see:"
- echo "$YOCTO_PARAVIRT_KVM_WIKI";
- exit 1;
- fi
-
- if [ -w /dev/vhost-net -a -r /dev/vhost-net ]; then
- VHOST_ACTIVE="yes"
- else
- echo "You have no rights on /dev/vhost-net."
- echo "Please change the ownership of this file as described at:"
- echo "$YOCTO_KVM_WIKI";
- exit 1;
- fi
- fi
-fi
-
-machine2=`echo $MACHINE | tr 'a-z' 'A-Z' | sed 's/-/_/'`
-# MACHINE is now set for all cases
-
-# Defaults used when these vars need to be inferred
-QEMUX86_DEFAULT_KERNEL=bzImage-qemux86.bin
-QEMUX86_DEFAULT_FSTYPE=ext4
-
-QEMUX86_64_DEFAULT_KERNEL=bzImage-qemux86-64.bin
-QEMUX86_64_DEFAULT_FSTYPE=ext4
-
-QEMUARM_DEFAULT_KERNEL=zImage-qemuarm.bin
-QEMUARM_DEFAULT_FSTYPE=ext4
-
-QEMUARM64_DEFAULT_KERNEL=Image-qemuarm64.bin
-QEMUARM64_DEFAULT_FSTYPE=ext4
-
-QEMUMIPS_DEFAULT_KERNEL=vmlinux-qemumips.bin
-QEMUMIPS_DEFAULT_FSTYPE=ext4
-
-QEMUMIPSEL_DEFAULT_KERNEL=vmlinux-qemumipsel.bin
-QEMUMIPSEL_DEFAULT_FSTYPE=ext4
-
-QEMUMIPS64_DEFAULT_KERNEL=vmlinux-qemumips64.bin
-QEMUMIPS64_DEFAULT_FSTYPE=ext4
-
-QEMUSH4_DEFAULT_KERNEL=vmlinux-qemumips.bin
-QEMUSH4_DEFAULT_FSTYPE=ext4
-
-QEMUPPC_DEFAULT_KERNEL=vmlinux-qemuppc.bin
-QEMUPPC_DEFAULT_FSTYPE=ext4
-
-QEMUMICROBLAZE_DEFAULT_KERNEL=linux.bin.ub
-QEMUMICROBLAZE_DEFAULT_FSTYPE=cpio
-
-QEMUZYNQ_DEFAULT_KERNEL=uImage
-QEMUZYNQ_DEFAULT_FSTYPE=cpio
-
-QEMUZYNQMP_DEFAULT_KERNEL=Image
-QEMUZYNQMP_DEFAULT_FSTYPE=cpio
-
-setup_path_vars() {
- if [ -z "$OE_TMPDIR" ] ; then
- PATHS_REQUIRED=true
- elif [ "$1" = "1" -a -z "$DEPLOY_DIR_IMAGE" ] ; then
- PATHS_REQUIRED=true
- else
- PATHS_REQUIRED=false
- fi
-
- if [ "$PATHS_REQUIRED" = "true" ]; then
- # Try to get the variable values from bitbake
- type -P bitbake &>/dev/null || {
- echo "In order for this script to dynamically infer paths";
- echo "to kernels or filesystem images, you either need";
- echo "bitbake in your PATH or to source oe-init-build-env";
- echo "before running this script" >&2;
- exit 1; }
-
- # We have bitbake in PATH, get the variable values from bitbake
- BITBAKE_ENV_TMPFILE=`mktemp --tmpdir runqemu.XXXXXXXXXX`
- if [ "$?" != "0" ] ; then
- echo "Error: mktemp failed for bitbake environment output"
- exit 1
- fi
-
- MACHINE=$MACHINE bitbake -e > $BITBAKE_ENV_TMPFILE
- if [ -z "$OE_TMPDIR" ] ; then
- OE_TMPDIR=`sed -n 's/^TMPDIR=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
- fi
- if [ -z "$DEPLOY_DIR_IMAGE" ] ; then
- DEPLOY_DIR_IMAGE=`sed -n 's/^DEPLOY_DIR_IMAGE=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
- fi
- if [ -z "$QEMU_DTB" ] ; then
- QEMU_DTB=`sed -n 's/^QEMU_DTB=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
- fi
- if [ -z "$OE_TMPDIR" ]; then
- # Check for errors from bitbake that the user needs to know about
- BITBAKE_OUTPUT=`cat $BITBAKE_ENV_TMPFILE | wc -l`
- if [ "$BITBAKE_OUTPUT" -eq "0" ]; then
- echo "Error: this script needs to be run from your build directory, or you need"
- echo "to explicitly set OE_TMPDIR and DEPLOY_DIR_IMAGE in your environment"
- else
- echo "There was an error running bitbake to determine TMPDIR"
- echo "Here is the output from 'bitbake -e':"
- cat $BITBAKE_ENV_TMPFILE
- fi
- rm $BITBAKE_ENV_TMPFILE
- exit 1
- fi
- rm $BITBAKE_ENV_TMPFILE
- fi
-}
-
-setup_sysroot() {
- # Toolchain installs set up $OECORE_NATIVE_SYSROOT in their
- # environment script. If that variable isn't set, we're
- # either in an in-tree build scenario or the environment
- # script wasn't source'd.
- if [ -z "$OECORE_NATIVE_SYSROOT" ]; then
- setup_path_vars
- BUILD_ARCH=`uname -m`
- BUILD_OS=`uname | tr '[A-Z]' '[a-z]'`
- BUILD_SYS="$BUILD_ARCH-$BUILD_OS"
-
- OECORE_NATIVE_SYSROOT=$OE_TMPDIR/sysroots/$BUILD_SYS
- fi
-
- # Some recipes store the BIOS under $OE_TMPDIR/sysroots/$MACHINE,
- # now defined as OECORE_MACHINE_SYSROOT. The latter is used when searching
- # BIOS, VGA BIOS and keymaps.
- if [ -z "$OECORE_MACHINE_SYSROOT" ]; then
- OECORE_MACHINE_SYSROOT=$OE_TMPDIR/sysroots/$MACHINE
- fi
-}
-
-# Locate a rootfs image to boot which matches our expected
-# machine and fstype.
-findimage() {
- where=$1
- machine=$2
- extension=$3
-
- # Sort rootfs candidates by modification time - the most
- # recently created one is the one we most likely want to boot.
- filename=`ls -t1 $where/*-image*$machine.$extension 2>/dev/null | head -n1`
- if [ "x$filename" != "x" ]; then
- ROOTFS=$filename
- return
- fi
-
- echo "Couldn't find a $machine rootfs image in $where."
- exit 1
-}
-
-if [ -e "$ROOTFS" -a -z "$FSTYPE" ]; then
- # Extract the filename extension
- EXT=`echo $ROOTFS | awk -F . '{ print \$NF }'`
- if [ "x$EXT" = "xext2" -o "x$EXT" = "xext3" -o \
- "x$EXT" = "xjffs2" -o "x$EXT" = "xbtrfs" -o \
- "x$EXT" = "xext4" ]; then
- FSTYPE=$EXT
- else
- echo "Note: Unable to determine filesystem extension for $ROOTFS"
- echo "We will use the default FSTYPE for $MACHINE"
- # ...which is done further below...
- fi
-fi
-
-if [ -z "$KERNEL" -a "$IS_VM" = "false" ]; then \
- setup_path_vars 1
- eval kernel_file=\$${machine2}_DEFAULT_KERNEL
- KERNEL=$DEPLOY_DIR_IMAGE/$kernel_file
-
- if [ -z "$KERNEL" ]; then
- error "Unable to determine default kernel for MACHINE [$MACHINE]"
- fi
-fi
-# KERNEL is now set for all cases
-
-if [ -z "$FSTYPE" ]; then
- eval FSTYPE=\$${machine2}_DEFAULT_FSTYPE
-
- if [ -z "$FSTYPE" ]; then
- error "Unable to determine default fstype for MACHINE [$MACHINE]"
- fi
-fi
-
-# FSTYPE is now set for all cases
-
-# Handle cases where a ROOTFS type is given instead of a filename, e.g.
-# core-image-sato
-if [ "$LAZY_ROOTFS" = "true" ]; then
- setup_path_vars 1
- echo "Assuming $ROOTFS really means $DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE"
- if [ "$IS_VM" = "true" ]; then
- VM=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE
- else
- ROOTFS=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE
- fi
-fi
-
-if [ -z "$ROOTFS" ]; then
- setup_path_vars 1
- T=$DEPLOY_DIR_IMAGE
- eval rootfs_list=\$${machine2}_DEFAULT_ROOTFS
- findimage $T $MACHINE $FSTYPE
-
- if [ -z "$ROOTFS" ]; then
- error "Unable to determine default rootfs for MACHINE [$MACHINE]"
- elif [ "$IS_VM" = "true" ]; then
- VM=$ROOTFS
- fi
-fi
-# ROOTFS is now set for all cases, now expand it to be an absolute path, it should exist at this point
-
-ROOTFS=`readlink -f $ROOTFS`
-
-echo ""
-echo "Continuing with the following parameters:"
-if [ "$IS_VM" = "false" ]; then
- echo "KERNEL: [$KERNEL]"
- echo "ROOTFS: [$ROOTFS]"
-else
- echo "VM: [$VM]"
-fi
-echo "FSTYPE: [$FSTYPE]"
-
-setup_sysroot
-# OECORE_NATIVE_SYSROOT and OECORE_MACHINE_SYSROOT are now set for all cases
-
-INTERNAL_SCRIPT="$0-internal"
-if [ ! -f "$INTERNAL_SCRIPT" -o ! -r "$INTERNAL_SCRIPT" ]; then
-INTERNAL_SCRIPT=`which runqemu-internal`
-fi
-
-# Specify directory for BIOS, VGA BIOS and keymaps
-if [ ! -z "$CUSTOMBIOSDIR" ]; then
- if [ -d "$OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" ]; then
- echo "Assuming biosdir is $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
- elif [ -d "$OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" ]; then
- echo "Assuming biosdir is $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
- else
- if [ ! -d "$CUSTOMBIOSDIR" ]; then
- echo "Custom BIOS directory not found. Tried: $CUSTOMBIOSDIR"
- echo "and $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
- echo "and $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
- exit 1;
- fi
- echo "Assuming biosdir is $CUSTOMBIOSDIR"
- SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $CUSTOMBIOSDIR"
- fi
-fi
-
-. $INTERNAL_SCRIPT
-exit $?
+ runqemu qemuarm
+ runqemu tmp/deploy/images/qemuarm
+ runqemu tmp/deploy/images/qemux86/qemuboot.py
+ runqemu qemux86-64 core-image-sato ext4
+ runqemu qemux86-64 wic-image-minimal wic
+ runqemu path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial
+ runqemu qemux86 iso/hddimg/vmdk/qcow2/vdi/ramfs/cpio.gz...
+ runqemu qemux86 qemuparams="-m 256"
+ runqemu qemux86 bootparams="psplash=false"
+ runqemu path/to/<image>-<machine>.vmdk
+ runqemu path/to/<image>-<machine>.wic
+""")
+
+def check_tun():
+ """Check /dev/net/run"""
+ dev_tun = '/dev/net/tun'
+ if not os.path.exists(dev_tun):
+ raise Exception("TUN control device %s is unavailable; you may need to enable TUN (e.g. sudo modprobe tun)" % dev_tun)
+
+ if not os.access(dev_tun, os.W_OK):
+ raise Exception("TUN control device %s is not writable, please fix (e.g. sudo chmod 666 %s)" % (dev_tun, dev_tun))
+
+
+def acquire_lock(lockfile):
+ lock = lockfile + '.lock'
+ logger.info("Acquiring lockfile %s..." % lock)
+ with open(lock, 'w') as f:
+ try:
+ fcntl.flock(f, fcntl.LOCK_EX|fcntl.LOCK_NB)
+ except Exception as e:
+ logger.info("Acquiring lockfile %s failed: %s" % (lock, e))
+ return False
+ return True
+
+def release_lock(lockfile):
+ lock = lockfile + '.lock'
+ with open(lock) as f:
+ fcntl.flock(f, fcntl.LOCK_UN)
+ os.remove(lock)
+
+
+class BaseConfig(object):
+ def __init__(self):
+ # Vars can be merged with qemuboot.py, use a dict to manage them.
+ self.d = {
+ 'MACHINE': '',
+ 'QEMU_OPT_SCRIPT': '',
+ 'KERNEL_CMDLINE_SCRIPT': '',
+ 'DEPLOY_DIR_IMAGE': '',
+ 'KERNEL_ROOT': '/dev/vda',
+ }
+
+ self.qemu_opt = ''
+ self.nfs_dir = ''
+ self.clean_nfs_dir = False
+ self.nfs_server = ''
+ self.rootfs = ''
+ self.kernel = ''
+ self.kernel_cmdline = ''
+ self.fstype = ''
+ self.kvm_enabled = False
+ self.vhost_enabled = False
+ self.slirp_enabled = False
+ self.nfs_instance = 0
+ self.nfs_running = False
+ self.serialstdio = False
+ self.cleantap = False
+ self.saved_stty = ''
+ self.lockfile = ''
+ self.audio_enabled = False
+ self.tcpserial_portnum = ''
+ self.custombiosdir = ''
+ self.fstypes = ('ext2', 'ext3', 'ext4', 'jffs2', 'nfs', 'btrfs', 'cpio.gz', 'cpio', 'ramfs')
+ self.vmtypes = ('hddimg', 'hdddirect', 'wic', 'vmdk', 'qcow2', 'vdi', 'iso')
+
+ def get(self, key):
+ if key in self.d:
+ return self.d.get(key)
+ else:
+ return ''
+
+ def set(self, key, value):
+ self.d[key] = value
+
+ def append(self, key, appendvar):
+ """Append a value to d[key]"""
+ if not appendvar.startswith(' '):
+ logger.warn('Maybe invalid append value "%s"' % appendvar)
+ if key in self.d:
+ self.d[key] = self.d[key] + appendvar
+ else:
+ self.d[key] = appendvar
+
+ def check_arg_fstype(self, fst):
+ """Check and set FSTYPE"""
+ if fst not in self.fstypes + self.vmtypes:
+ logger.warn("Maybe unsupported FSTYPE: %s" % fst)
+ if not self.fstype or self.fstype == fst:
+ if fst == 'ramfs':
+ fst = 'cpio.gz'
+ self.fstype = fst
+ else:
+ raise Exception("Conflicting: FSTYPE %s and %s" % (self.fstype, fst))
+
+ def set_machine_deploy_dir(self, machine, deploy_dir_image):
+ """Set MACHINE and DEPLOY_DIR_IMAGE"""
+ logger.info('MACHINE: %s' % machine)
+ logger.info('DEPLOY_DIR_IMAGE: %s' % deploy_dir_image)
+ self.set("MACHINE", machine)
+ self.set("DEPLOY_DIR_IMAGE", deploy_dir_image)
+
+ def check_arg_nfs(self, p):
+ if os.path.isdir(p):
+ self.nfs_dir = p
+ else:
+ m = re.match('(.*):(.*)', p)
+ self.nfs_server = m.group(1)
+ self.nfs_dir = m.group(2)
+ self.rootfs = ""
+ self.check_arg_fstype('nfs')
+
+ def check_arg_path(self, p):
+ """
+ - Check whether it is qemuboot.py or contains qemuboot.py
+ - Check whether is a kernel file
+ - Check whether is a image file
+ - Check whether it is a nfs dir
+ """
+ if os.path.basename(p) == 'qemuboot.py':
+ machine = os.path.basename(os.path.dirname(p))
+ self.set_machine_deploy_dir(machine, os.path.dirname(p))
+ elif os.path.exists(os.path.join(p, 'qemuboot.py')):
+ machine = os.path.basename(p)
+ self.set_machine_deploy_dir(machine, p)
+ elif re.search('\.bin$', p) or re.search('bzImage', p) or \
+ re.search('zImage', p) or re.search('vmlinux', p) or \
+ re.search('fitImage', p) or re.search('uImage', p):
+ self.kernel = p
+ elif (not os.path.isdir(p)) and re.search('-image-', p):
+ dirpath = os.path.dirname(p)
+ if os.path.exists('%s/qemuboot.py' % dirpath):
+ machine = os.path.basename(os.path.dirname(p))
+ self.set_machine_deploy_dir(machine, os.path.dirname(p))
+ self.rootfs = p
+ m = re.search('.*\.(.*)$', p)
+ if m:
+ fst = m.group(1)
+ self.check_arg_fstype(fst)
+ else:
+ raise Exception("Can't find FSTYPE from: %s" % p)
+ elif os.path.isdir(p) or (re.search(':', arg) and re.search('/', arg)):
+ logger.info("Assuming %s is an nfs rootfs" % p)
+ self.check_arg_nfs(p)
+ else:
+ raise Exception("Unknown path arg %s" % p)
+
+ def check_arg_machine(self, arg):
+ """Check whether it is a machine"""
+ if self.get('MACHINE') and self.get('MACHINE') != arg or re.search('/', arg):
+ raise Exception("Unknown arg: %s" % arg)
+ elif self.get('MACHINE') == arg:
+ return
+ logger.info('Assuming MACHINE = %s' % arg)
+ cmd = 'MACHINE=%s bitbake -e' % arg
+ logger.info('Running %s...' % cmd)
+ bitbake_e = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout.read().decode('utf-8')
+ # bitbake -e doesn't report invalid MACHINE as an error, so
+ # let's check DEPLOY_DIR_IMAGE to make sure that it is a valid
+ # MACHINE.
+ s = re.search('^DEPLOY_DIR_IMAGE="(.*)"', bitbake_e, re.M)
+ if s:
+ deploy_dir_image = s.group(1)
+ else:
+ raise Exception("bitbake -e %s" % bitbake_e)
+ if os.path.isdir(deploy_dir_image):
+ qb = deploy_dir_image + '/qemuboot.py'
+ if os.path.exists(qb):
+ self.set_machine_deploy_dir(arg, deploy_dir_image)
+ else:
+ raise Exception("%s doesn't exist" % qb)
+ else:
+ raise Exception("Falied to set MACHINE to %s. Unknown arg: %s" % (arg, arg))
+
+ def check_args(self):
+ unknown_arg = ""
+ for arg in sys.argv[1:]:
+ if arg in self.fstypes + self.vmtypes:
+ self.check_arg_fstype(arg)
+ elif arg == 'nographic':
+ self.append('QEMU_OPT_SCRIPT', ' -nographic')
+ self.append('KERNEL_CMDLINE_SCRIPT', ' console=ttyS0')
+ elif arg == 'serial':
+ self.append('QEMU_OPT_SCRIPT', ' -serial stdio')
+ self.append('KERNEL_CMDLINE_SCRIPT', ' console=ttyS0')
+ self.serialstdio = True
+ elif arg == 'audio':
+ logger.info("Enabling audio in qemu")
+ logger.info("Please install sound drivers in linux host")
+ self.audio_enabled = True
+ elif arg == 'kvm':
+ self.kvm_enabled = True
+ elif arg == 'kvm-vhost':
+ self.vhost_enabled = True
+ elif arg == 'slirp':
+ self.slirp_enabled = True
+ elif arg == 'publicvnc':
+ self.append('QEMU_OPT_SCRIPT', ' -vnc :0')
+ elif arg.startswith('tcpserial='):
+ self.tcpserial_portnum = arg[len('tcpserial='):]
+ elif arg.startswith('biosdir='):
+ self.custombiosdir = arg[len('biosdir='):]
+ elif arg.startswith('biosfilename='):
+ self.append('QEMU_OPT_SCRIPT', ' -bios %s' % arg[len('biosfilename='):])
+ elif arg.startswith('qemuparams='):
+ self.append('QEMU_OPT_SCRIPT', ' %s' % arg[len('qemuparams='):])
+ elif arg.startswith('bootparams='):
+ self.append('KERNEL_CMDLINE_SCRIPT', ' %s' % arg[len('bootparams='):])
+ elif os.path.exists(arg) or (re.search(':', arg) and re.search('/', arg)):
+ self.check_arg_path(os.path.abspath(arg))
+ elif re.search('-image-', arg):
+ # Lazy rootfs
+ self.rootfs = arg
+ else:
+ # At last, assume is it the MACHINE
+ if (not unknown_arg) or unknown_arg == arg:
+ unknown_arg = arg
+ else:
+ raise Exception("Can't handle two unknown args: %s %s" % (unknown_arg, arg))
+ # Check to make sure it is a valid machine
+ if unknown_arg:
+ if self.get('MACHINE') == unknown_arg:
+ return
+ if not self.get('DEPLOY_DIR_IMAGE'):
+ # Trying to get DEPLOY_DIR_IMAGE from env.
+ p = os.getenv('DEPLOY_DIR_IMAGE')
+ if p and os.path.exists(os.path.join(p, 'qemuboot.py')):
+ machine = os.path.basename(p)
+ self.set_machine_deploy_dir(machine, p)
+ if unknown_arg == machine:
+ return
+ self.check_arg_machine(unknown_arg)
+
+ def check_kvm(self):
+ """Check kvm and kvm-host"""
+ if not (self.kvm_enabled or self.vhost_enabled):
+ self.append("QEMU_OPT_SCRIPT", ' %s %s' % (self.get('QB_MACHINE'), self.get('QB_CPU')))
+ return
+
+ if not self.get('QB_CPU_KVM'):
+ raise Exception("QB_CPU_KVM is NULL, this board doesn't support kvm")
+
+ self.append("QEMU_OPT_SCRIPT", ' %s %s' % (self.get('QB_MACHINE'), self.get('QB_CPU_KVM')))
+ yocto_kvm_wiki = "https://wiki.yoctoproject.org/wiki/How_to_enable_KVM_for_Poky_qemu"
+ yocto_paravirt_kvm_wiki = "https://wiki.yoctoproject.org/wiki/Running_an_x86_Yocto_Linux_image_under_QEMU_KVM"
+ dev_kvm = '/dev/kvm'
+ dev_vhost = '/dev/vhost-net'
+ with open('/proc/cpuinfo', 'r') as f:
+ kvm_cap = re.search('vmx|svm', "".join(f.readlines()))
+ if not kvm_cap:
+ logger.error("You are trying to enable KVM on a cpu without VT support.")
+ logger.error("Remove kvm from the command-line, or refer:")
+ raise Exception(yocto_kvm_wiki)
+
+ if not os.path.exists(dev_kvm):
+ logger.error("Missing KVM device. Have you inserted kvm modules?")
+ logger.error("For further help see:")
+ raise Exception(yocto_kvm_wiki)
+
+ if os.access(dev_kvm, os.W_OK|os.R_OK):
+ self.append('QEMU_OPT_SCRIPT', ' -enable-kvm')
+ else:
+ logger.error("You have no read or write permission on /dev/kvm.")
+ logger.error("Please change the ownership of this file as described at:")
+ raise Exception(yocto_kvm_wiki)
+
+ if self.vhost_enabled:
+ if not os.path.exists(dev_vhost):
+ logger.error("Missing virtio net device. Have you inserted vhost-net module?")
+ logger.error("For further help see:")
+ raise Exception(yocto_paravirt_kvm_wiki)
+
+ if not os.access(dev_kvm, os.W_OK|os.R_OK):
+ logger.error("You have no read or write permission on /dev/vhost-net.")
+ logger.error("Please change the ownership of this file as described at:")
+ raise Exception(yocto_kvm_wiki)
+
+ def check_fstype(self):
+ """Check and setup FSTYPE"""
+ if not self.fstype:
+ fstype = self.get('QB_DEFAULT_FSTYPE')
+ if fstype:
+ self.fstype = fstype
+ else:
+ raise Exception("FSTYPE is NULL!")
+
+ def check_rootfs(self):
+ """Check and set rootfs"""
+ rootfs = self.rootfs
+ if rootfs:
+ if not os.path.exists(rootfs):
+ # Lazy rootfs
+ rootfs = "%s/%s-%s.%s" % (self.get('DEPLOY_DIR_IMAGE'),
+ self.rootfs, self.get('MACHINE'),
+ self.fstype)
+ elif self.fstype == 'nfs':
+ return
+ else:
+ rootfs = '%s/%s.%s' % (self.get('DEPLOY_DIR_IMAGE'),
+ self.get('IMAGE_LINK_NAME'), self.fstype)
+ if os.path.exists(rootfs):
+ self.rootfs = rootfs
+ else:
+ raise Exception("Can't find rootfs: %s" % rootfs)
+
+ def check_kernel(self):
+ """Check and set kernel, dtb"""
+ # The vm image doesn't need a kernel
+ if self.fstype in self.vmtypes:
+ return
+ kernel = self.kernel
+ if not kernel:
+ kernel = "%s/%s" % (self.get('DEPLOY_DIR_IMAGE'), self.get('QB_DEFAULT_KERNEL'))
+
+ if os.path.exists(kernel):
+ self.kernel = kernel
+ else:
+ raise Exception("KERNEL %s not found" % kernel)
+
+ dtb = self.get('QB_DTB')
+ if dtb:
+ dtb = "%s/%s" % (self.get('DEPLOY_DIR_IMAGE'), dtb)
+ if os.path.exists(dtb):
+ self.set('QB_DTB', '-dtb %s' % dtb)
+ else:
+ raise Exception("DTB %s not found" % dtb)
+
+
+ def check_biosdir(self):
+ """Check custombiosdir"""
+ if not self.custombiosdir:
+ return
+
+ biosdir = ""
+ biosdir_native = "%s/%s" % (self.get('STAGING_DIR_NATIVE'), self.custombiosdir)
+ biosdir_host = "%s/%s" % (self.get('STAGING_DIR_HOST'), self.custombiosdir)
+ for i in (self.custombiosdir, biosdir_native, biosdir_host):
+ if os.path.isdir(i):
+ biosdir = i
+ break
+
+ if biosdir:
+ logger.info("Assuming biosdir is: %s" % biosdir)
+ self.append('QEMU_OPT_SCRIPT', ' -L %s' % biosdir)
+ else:
+ logger.error("Custom BIOS directory not found. Tried: %s, %s, and %s" % (self.custombiosdir, biosdir_native, biosdir_host))
+ raise Exception("Invalid custombiosdir: %s" % self.custombiosdir)
+
+ def check_mem(self):
+ s = re.search('-m +([0-9]+)', self.get('QEMU_OPT_SCRIPT'))
+ if s:
+ self.set('QB_MEM', '-m %s' % s.group(1))
+ elif not self.get('QB_MEM'):
+ logger.info('QB_MEM is not set, use 512M by default')
+ self.set('QB_MEM', '-m 512')
+
+ self.append('KERNEL_CMDLINE_SCRIPT', ' mem=%s' % self.get('QB_MEM').replace('-m','').strip() + 'M')
+ self.append('QEMU_OPT_SCRIPT', ' %s' % self.get('QB_MEM'))
+
+ def check_tcpserial(self):
+ if self.tcpserial_portnum:
+ if self.get('TUNE_ARCH') == 'aarch64':
+ self.append('QEMU_OPT_SCRIPT', ' -device virtio-serial-device -chardev socket,id=virtcon,port=%s,host=127.0.0.1 -device virtconsole,chardev=virtcon' % self.tcpserial_portnum)
+ else:
+ self.append('QEMU_OPT_SCRIPT', ' -serial tcp:127.0.0.1:%s' % self.tcpserial_portnum)
+
+
+ def check_and_set(self):
+ """Check configs sanity and set when needed"""
+ check_tun()
+ # Check audio
+ if self.audio_enabled:
+ if not self.get('QB_AUDIO_DRV'):
+ raise Exception("QB_AUDIO_DRV is NULL, this board doesn't support audio")
+ if not self.get('QB_AUDIO_OPT'):
+ logger.warn('QB_AUDIO_OPT is NULL, you may need define it to make audio work')
+ else:
+ self.append('QEMU_OPT_SCRIPT', ' %s' % self.get('QB_AUDIO_OPT'))
+ os.putenv('QEMU_AUDIO_DRV', self.get('QB_AUDIO_DRV'))
+ else:
+ os.putenv('QEMU_AUDIO_DRV', 'none')
+
+ self.check_kvm()
+ self.check_fstype()
+ self.check_rootfs()
+ self.check_kernel()
+ self.check_biosdir()
+ self.check_mem()
+ self.check_tcpserial()
+
+ def import_qemuboot(self):
+ deploy_dir_image = self.get('DEPLOY_DIR_IMAGE')
+ if not deploy_dir_image:
+ raise Exception("DEPLOY_DIR_IMAGE is NULL!")
+ sys.path.insert(0, deploy_dir_image)
+ import qemuboot
+ for k in qemuboot.config_bsp:
+ if qemuboot.config_bsp[k]:
+ self.set(k, qemuboot.config_bsp[k])
+
+ def print_config(self):
+ logger.info('Continuing with the following parameters:\n')
+ if not self.fstype in self.vmtypes:
+ print('KERNEL: [%s]' % self.kernel)
+ print('MACHINE: [%s]' % self.get('MACHINE'))
+ print('FSTYPE: [%s]' % self.fstype)
+ if self.fstype == 'nfs':
+ print('NFS_DIR: [%s]' % self.nfs_dir)
+ else:
+ print('ROOTFS: [%s]' % self.rootfs)
+ print('')
+
+ def weak_assign(self, var, value):
+ if not self.get(var):
+ self.set(var, value)
+
+ def setup_nfs(self):
+ if not self.nfs_server:
+ if self.slirp_enabled:
+ self.nfs_server = '10.0.2.2'
+ else:
+ self.nfs_server = '192.168.7.1'
+
+ nfs_instance = int(self.nfs_instance)
+
+ mountd_rpcport = 21111 + nfs_instance
+ nfsd_rpcport = 11111 + nfs_instance
+ nfsd_port = 3049 + 2 * nfs_instance
+ mountd_port = 3048 + 2 * nfs_instance
+ unfs_opts="nfsvers=3,port=%s,mountprog=%s,nfsprog=%s,udp,mountport=%s" % (nfsd_port, mountd_rpcport, nfsd_rpcport, mountd_port)
+ self.unfs_opts = unfs_opts
+
+ p = '%s/.runqemu-sdk/pseudo' % os.getenv('HOME')
+ os.putenv('PSEUDO_LOCALSTATEDIR', p)
+
+ # Extract .tar.bz2 or .tar.bz if no self.nfs_dir
+ if not self.nfs_dir:
+ src_prefix = '%s/%s' % (self.get('DEPLOY_DIR_IMAGE'), self.get('IMAGE_LINK_NAME'))
+ dest = "%s-nfsroot" % src_prefix
+ if os.path.exists('%s.pseudo_state' % dest):
+ logger.info('Use %s as NFS_DIR' % dest)
+ self.nfs_dir = dest
+ else:
+ src = ""
+ src1 = '%s.tar.bz2' % src_prefix
+ src2 = '%s.tar.gz' % src_prefix
+ if os.path.exists(src1):
+ src = src1
+ elif os.path.exists(src2):
+ src = src2
+ if not src:
+ raise Exception("No NFS_DIR is set and can't find %s or %s to extract" % (src1, src2))
+ logger.info('NFS_DIR not found, extracting %s to %s' % (src, dest))
+ cmd = 'runqemu-extract-sdk %s %s' % (src, dest)
+ logger.info('Running %s...' % cmd)
+ if subprocess.call(cmd, shell=True) != 0:
+ raise Exception('Failed to run %s' % cmd)
+ self.clean_nfs_dir = True
+ self.nfs_dir = dest
+
+ # Start the userspace NFS server
+ cmd = 'runqemu-export-rootfs restart %s' % self.nfs_dir
+ logger.info('Running %s...' % cmd)
+ if subprocess.call(cmd, shell=True) != 0:
+ raise Exception('Failed to run %s' % cmd)
+
+ self.nfs_running = True
+
+
+ def setup_slirp(self):
+ if self.fstype == 'nfs':
+ self.setup_nfs()
+ if self.get('TUNE_ARCH') == 'aarch64':
+ raise Exception("aarch64 doesn't support slirp mode")
+ self.append('KERNEL_CMDLINE_SCRIPT', ' ip=dhcp')
+ self.rootfs_options = '-drive file=%s,if=virtio,format=raw' % self.rootfs
+ self.set('QB_NETWORK_CMD', '')
+
+ def setup_tap(self):
+ """Setup tap"""
+
+ # This file is created when runqemu-gen-tapdevs creates a bank of tap
+ # devices, indicating that the user should not bring up new ones using
+ # sudo.
+ nosudo_flag = '/etc/runqemu-nosudo'
+ self.qemuifup = shutil.which('runqemu-ifup')
+ self.qemuifdown = shutil.which('runqemu-ifdown')
+ ip = shutil.which('ip')
+ lockdir = "/tmp/qemu-tap-locks"
+
+ if not (self.qemuifup and self.qemuifdown and ip):
+ raise Exception("runqemu-ifup, runqemu-ifdown or ip not found")
+
+ if not os.path.exists(lockdir):
+ os.mkdir(lockdir)
+
+ cmd = '%s link' % ip
+ logger.info('Running %s...' % cmd)
+ ip_link = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout.read().decode('utf-8')
+ # Matches line like: 6: tap0: <foo>
+ possibles = re.findall('^[1-9]+: +(tap[0-9]+): <.*', ip_link, re.M)
+ tap = ""
+ use_preconf_tap = False
+ for p in possibles:
+ lockfile = os.path.join(lockdir, p)
+ if os.path.exists('%s.skip' % lockfile):
+ logger.info('Found %s.skip, skipping %s' % (lockfile, p))
+ continue
+ if acquire_lock(lockfile):
+ self.lockfile = lockfile
+ tap = p
+ logger.info("Using preconfigured tap device %s" % tap)
+ logger.info("If this is not intended, touch %s.skip to make runqemu skip %s." %(lockfile, tap))
+ use_preconf_tap = True
+ break
+
+ if not tap:
+ if os.path.exists(nosudo_flag):
+ logger.error("Error: There are no available tap devices to use for networking,")
+ logger.error("and I see %s exists, so I am not going to try creating" % nosudo_flag)
+ raise Exception("a new one with sudo.")
+
+ gid = os.getgid()
+ uid = os.getuid()
+ logger.info("Setting up tap interface under sudo")
+ cmd = 'sudo %s %s %s %s' % (self.qemuifup, uid, gid, self.get('STAGING_DIR_NATIVE'))
+ tap = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout.read().decode('utf-8')
+ self.cleantap = True
+ logger.info('Created tap: %s' % tap)
+
+ self.tap = tap
+ n0 = tap[3:]
+ n1 = int(n0) * 2 + 1
+ n2 = n1 + 1
+ self.nfs_instance = n0
+ if self.fstype == 'nfs':
+ self.setup_nfs()
+ self.append("KERNEL_CMDLINE_SCRIPT", " ip=192.168.7.%s::192.168.7.%s:255.255.255.0" % (n2, n1))
+ qemu_tap_cmd = "-net tap,vlan=0,ifname=%s,script=no,downscript=no" % self.tap
+ self.rootfs_options = '-drive file=%s,if=virtio,format=raw' % self.rootfs
+ if self.get('TUNE_ARCH') == 'aarch64':
+ qemu_network_cmd = '-netdev tap,id=net0,ifname=%s,script=no,downscript=no -device virtio-net-device,netdev=net0' % self.tap
+ self.rootfs_options = '-drive id=disk0,file=%s,if=none,format=raw -device virtio-blk-device,drive=disk0' % self.rootfs
+ elif self.get('TUNE_ARCH') == 'powerpc':
+ qemu_network_cmd = '%s ' % qemu_tap_cmd
+ else:
+ qemu_network_cmd = "-net nic,model=virtio %s " % qemu_tap_cmd
+ if self.vhost_enabled:
+ qemu_network_cmd += ',vhost=on'
+ self.weak_assign('QB_NETWORK_CMD', qemu_network_cmd)
+
+ def setup_network(self):
+ cmd = "stty -g"
+ self.saved_stty = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout.read().decode('utf-8')
+ if self.slirp_enabled:
+ self.setup_slirp()
+ else:
+ self.setup_tap()
+
+ if self.fstype in ('cpio.gz', 'cpio'):
+ self.set('QB_NETWORK_CMD', '')
+ self.kernel_cmdline = 'root=/dev/ram0 rw debugshell'
+ self.rootfs_options = '-initrd %s' % self.rootfs
+ else:
+ if self.fstype in self.vmtypes:
+ if self.fstype == 'iso':
+ vm_drive = '-cdrom %s' % self.rootfs
+ else:
+ cmd1 = "grep -q 'root=/dev/sd' %s" % self.rootfs
+ cmd2 = "grep -q 'root=/dev/hd' %s" % self.rootfs
+ if subprocess.call(cmd1, shell=True) == 0:
+ logger.info('Using scsi drive')
+ vm_drive = '-drive if=none,id=hd,file=%s -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd' % self.rootfs
+ elif subprocess.call(cmd2, shell=True) == 0:
+ logger.info('Using scsi drive')
+ vm_drive = self.rootfs
+ else:
+ logger.warn("Can't detect drive type %s" % self.rootfs)
+ logger.warn('Tring to use virtio block drive')
+ vm_drive = '-drive if=virtio,file=%s' % self.rootfs
+ self.rootfs_options = '%s -no-reboot' % vm_drive
+ self.kernel_cmdline = 'root=%s rw highres=off' % (self.get('KERNEL_ROOT'))
+
+ if self.fstype == 'nfs':
+ self.rootfs_options = ''
+ k_root = '/dev/nfs nfsroot=%s:%s,%s' % (self.nfs_server, self.nfs_dir, self.unfs_opts)
+ self.kernel_cmdline = 'root=%s rw highres=off' % k_root
+
+ self.weak_assign('QB_ROOTFS_OPTIONS', self.rootfs_options)
+
+ def setup_final(self):
+ qemu_system = self.get('QB_SYSTEM_NAME')
+ if not qemu_system:
+ raise Exception("Failed to boot, QB_SYSTEM_NAME is NULL!")
+
+ qemu_bin = '%s/%s' % (self.get('STAGING_BINDIR_NATIVE'), qemu_system)
+ if not os.access(qemu_bin, os.X_OK):
+ raise Exception("No QEMU binary '%s' could be found" % qemu_bin)
+
+ self.qemu_opt = "%s %s %s %s %s %s" % (qemu_bin, self.get('QB_NETWORK_CMD'), self.get('QEMU_OPT_SCRIPT'), self.get('QB_ROOTFS_OPTIONS'), self.get('QB_DTB'), self.get('QB_OPT_APPEND'))
+
+ if self.serialstdio:
+ logger.info("Interrupt character is '^]'")
+ cmd = "stty intr ^]"
+ subprocess.call(cmd, shell=True)
+
+ first_serial = ""
+ if not re.search("-nographic", self.qemu_opt):
+ first_serial = "-serial mon:vc"
+ # We always want a ttyS1. Since qemu by default adds a serial
+ # port when nodefaults is not specified, it seems that all that
+ # would be needed is to make sure a "-serial" is there. However,
+ # it appears that when "-serial" is specified, it ignores the
+ # default serial port that is normally added. So here we make
+ # sure to add two -serial if there are none. And only one if
+ # there is one -serial already.
+ serial_num = len(re.findall("-serial", self.qemu_opt))
+ if serial_num == 0:
+ self.qemu_opt += " %s %s" % (first_serial, self.get("QB_SERIAL_OPT"))
+ elif serial_num == 1:
+ self.qemu_opt += " %s" % self.get("QB_SERIAL_OPT")
+
+ def start_qemu(self):
+ if self.kernel:
+ kernel_opts = "-kernel %s -append '%s %s %s'" % (self.kernel, self.kernel_cmdline, self.get('KERNEL_CMDLINE_SCRIPT'), self.get('QB_KERNEL_CMDLINE_APPEND'))
+ else:
+ kernel_opts = ""
+ cmd = "%s %s" % (self.qemu_opt, kernel_opts)
+ logger.info('Running %s' % cmd)
+ if subprocess.call(cmd, shell=True) != 0:
+ raise Exception('Failed to run %s' % cmd)
+
+ def cleanup(self):
+ if self.cleantap:
+ cmd = 'sudo %s %s %s' % (self.qemuifdown, self.tap, self.get('STAGING_DIR_NATIVE'))
+ logger.info('Running %s' % cmd)
+ subprocess.call(cmd, shell=True)
+ if self.lockfile:
+ logger.info("Releasing lockfile of preconfigured tap device '%s'" % self.tap)
+ release_lock(self.lockfile)
+
+ if self.nfs_running:
+ logger.info("Shutting down the userspace NFS server...")
+ cmd = "runqemu-export-rootfs stop %s" % self.nfs_dir
+ logger.info('Running %s' % cmd)
+ subprocess.call(cmd, shell=True)
+
+ if self.saved_stty:
+ cmd = "stty %s" % self.saved_stty
+ subprocess.call(cmd, shell=True)
+
+ if self.clean_nfs_dir:
+ logger.info('Removing %s' % self.nfs_dir)
+ shutil.rmtree(self.nfs_dir)
+ shutil.rmtree('%s.pseudo_state' % self.nfs_dir)
+
+def main():
+ if len(sys.argv) == 1 or "help" in sys.argv:
+ print_usage()
+ return 0
+ config = BaseConfig()
+ config.check_args()
+ config.import_qemuboot()
+ config.check_and_set()
+ config.print_config()
+ try:
+ config.setup_network()
+ config.setup_final()
+ config.start_qemu()
+ finally:
+ config.cleanup()
+ return 0
+
+if __name__ == "__main__":
+ try:
+ ret = main()
+ except Exception as esc:
+ ret = 1
+ import traceback
+ traceback.print_exc()
+ sys.exit(ret)
diff --git a/scripts/runqemu-internal b/scripts/runqemu-internal
deleted file mode 100755
index d10466d..0000000
--- a/scripts/runqemu-internal
+++ /dev/null
@@ -1,739 +0,0 @@
-#!/bin/bash -x
-
-# Handle running OE images under qemu
-#
-# Copyright (C) 2006-2011 Linux Foundation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# Call setting:
-# QEMU_MEMORY (optional) - set the amount of memory in the emualted system.
-# SERIAL_LOGFILE (optional) - log the serial port output to a file
-#
-# Image options:
-# MACHINE - the machine to run
-# FSTYPE - the image type to run
-# KERNEL - the kernel image file to use
-# ROOTFS - the disk image file to use
-#
-
-mem_size=-1
-
-#Get rid of <> and get the contents of extra qemu running params
-SCRIPT_QEMU_EXTRA_OPT=`echo $SCRIPT_QEMU_EXTRA_OPT | sed -e 's/<//' -e 's/>//'`
-#if user set qemu memory, eg: -m 256 in qemu extra params, we need to do some
-# validation check
-mem_set=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-m[[:space:]] *[0-9]*\)'`
-if [ ! -z "$mem_set" ] ; then
-#Get memory setting size from user input
- mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
-fi
-
-# This file is created when runqemu-gen-tapdevs creates a bank of tap
-# devices, indicating that the user should not bring up new ones using
-# sudo.
-NOSUDO_FLAG="/etc/runqemu-nosudo"
-
-QEMUIFUP=`which runqemu-ifup 2> /dev/null`
-QEMUIFDOWN=`which runqemu-ifdown 2> /dev/null`
-if [ -z "$QEMUIFUP" -o ! -x "$QEMUIFUP" ]; then
- echo "runqemu-ifup cannot be found or executed"
- exit 1
-fi
-if [ -z "$QEMUIFDOWN" -o ! -x "$QEMUIFDOWN" ]; then
- echo "runqemu-ifdown cannot be found or executed"
- exit 1
-fi
-
-NFSRUNNING="false"
-
-#capture original stty values
-ORIG_STTY=$(stty -g)
-
-if [ "$SLIRP_ENABLED" = "yes" ]; then
- KERNEL_NETWORK_CMD="ip=dhcp"
- QEMU_TAP_CMD=""
- QEMU_UI_OPTIONS="-show-cursor -usb -usbdevice tablet"
- QEMU_NETWORK_CMD=""
- DROOT="/dev/vda"
- ROOTFS_OPTIONS="-drive file=$ROOTFS,if=virtio,format=raw"
-else
- acquire_lock() {
- lockfile=$1
- if [ -z "$lockfile" ]; then
- echo "Error: missing lockfile arg passed to acquire_lock()"
- return 1
- fi
-
- touch $lockfile.lock 2>/dev/null
- if [ $? -ne 0 ]; then
- echo "Acquiring lockfile for $lockfile.lock failed"
- return 1
- fi
- exec 8>$lockfile.lock
- flock -n -x 8
- if [ $? -ne 0 ]; then
- exec 8>&-
- return 1
- fi
-
- return 0
- }
-
- release_lock() {
- lockfile=$1
- if [ -z "$lockfile" ]; then
- echo "Error: missing lockfile arg passed to release_lock()"
- return 1
- fi
-
- rm -f $lockfile.lock
- exec 8>&-
- }
-
- LOCKDIR="/tmp/qemu-tap-locks"
- if [ ! -d "$LOCKDIR" ]; then
- mkdir $LOCKDIR
- chmod 777 $LOCKDIR
- fi
-
- IFCONFIG=`which ip 2> /dev/null`
- if [ -z "$IFCONFIG" ]; then
- IFCONFIG=/sbin/ip
- fi
- if [ ! -x "$IFCONFIG" ]; then
- echo "$IFCONFIG cannot be executed"
- exit 1
- fi
-
- POSSIBLE=`$IFCONFIG link | grep 'tap' | awk '{print $2}' | sed -e 's/://' -e 's/@.*//'`
- TAP=""
- LOCKFILE=""
- USE_PRECONF_TAP="no"
- for tap in $POSSIBLE; do
- LOCKFILE="$LOCKDIR/$tap"
- if [ -e "$LOCKFILE.skip" ]; then
- echo "Found $LOCKFILE.skip, skipping $tap"
- continue
- fi
- echo "Acquiring lockfile for $tap..."
- acquire_lock $LOCKFILE
- if [ $? -eq 0 ]; then
- TAP=$tap
- USE_PRECONF_TAP="yes"
- break
- fi
- done
-
- if [ "$TAP" = "" ]; then
- if [ -e "$NOSUDO_FLAG" ]; then
- echo "Error: There are no available tap devices to use for networking,"
- echo "and I see $NOSUDO_FLAG exists, so I am not going to try creating"
- echo "a new one with sudo."
- exit 1
- fi
-
- GROUPID=`id -g`
- USERID=`id -u`
- echo "Setting up tap interface under sudo"
- # Redirect stderr since we could see a LD_PRELOAD warning here if pseudo is loaded
- # but inactive. This looks scary but is harmless
- tap=`sudo $QEMUIFUP $USERID $GROUPID $OECORE_NATIVE_SYSROOT 2> /dev/null`
- if [ $? -ne 0 ]; then
- # Re-run standalone to see verbose errors
- sudo $QEMUIFUP $USERID $GROUPID $OECORE_NATIVE_SYSROOT
- return 1
- fi
- LOCKFILE="$LOCKDIR/$tap"
- echo "Acquiring lockfile for $tap..."
- acquire_lock $LOCKFILE
- if [ $? -eq 0 ]; then
- TAP=$tap
- fi
- else
- echo "Using preconfigured tap device '$TAP'"
- echo "If this is not intended, touch $LOCKFILE.skip to make runqemu skip $TAP."
- fi
-
- cleanup() {
- if [ ! -e "$NOSUDO_FLAG" -a "$USE_PRECONF_TAP" = "no" ]; then
- # Redirect stderr since we could see a LD_PRELOAD warning here if pseudo is loaded
- # but inactive. This looks scary but is harmless
- sudo $QEMUIFDOWN $TAP $OECORE_NATIVE_SYSROOT 2> /dev/null
- fi
- echo "Releasing lockfile of preconfigured tap device '$TAP'"
- release_lock $LOCKFILE
-
- if [ "$NFSRUNNING" = "true" ]; then
- echo "Shutting down the userspace NFS server..."
- echo "runqemu-export-rootfs stop $ROOTFS"
- runqemu-export-rootfs stop $ROOTFS
- fi
- # If QEMU crashes or somehow tty properties are not restored
- # after qemu exits, we need to run stty sane
- #stty sane
-
- #instead of using stty sane we set the original stty values
- stty ${ORIG_STTY}
-
- }
-
-
- n0=$(echo $TAP | sed 's/tap//')
-
- case $n0 in
- ''|*[!0-9]*)
- echo "Error Couldn't turn $TAP into an interface number?"
- exit 1
- ;;
- esac
-
- n1=$(($n0 * 2 + 1))
- n2=$(($n1 + 1))
-
- KERNEL_NETWORK_CMD="ip=192.168.7.$n2::192.168.7.$n1:255.255.255.0"
- QEMU_TAP_CMD="-net tap,vlan=0,ifname=$TAP,script=no,downscript=no"
- if [ "$VHOST_ACTIVE" = "yes" ]; then
- QEMU_NETWORK_CMD="-net nic,model=virtio $QEMU_TAP_CMD,vhost=on"
- else
- QEMU_NETWORK_CMD="-net nic,model=virtio $QEMU_TAP_CMD"
- fi
- DROOT="/dev/vda"
- ROOTFS_OPTIONS="-drive file=$ROOTFS,if=virtio,format=raw"
-
- KERNCMDLINE="mem=$QEMU_MEMORY"
- QEMU_UI_OPTIONS="-show-cursor -usb -usbdevice tablet"
-
- NFS_INSTANCE=`echo $TAP | sed 's/tap//'`
- export NFS_INSTANCE
-
- SERIALOPTS=""
- if [ "x$SERIAL_LOGFILE" != "x" ]; then
- SERIALOPTS="-serial file:$SERIAL_LOGFILE"
- fi
-fi
-
-if [ ! -f "$KERNEL" -a "$IS_VM" = "false" ]; then
- echo "Error: Kernel image file $KERNEL doesn't exist"
- cleanup
- return 1
-fi
-
-if [ "$FSTYPE" != "nfs" -a "$IS_VM" = "false" -a ! -f "$ROOTFS" ]; then
- echo "Error: Image file $ROOTFS doesn't exist"
- cleanup
- return 1
-fi
-
-if [ "$NFS_SERVER" = "" ]; then
- NFS_SERVER="192.168.7.1"
- if [ "$SLIRP_ENABLED" = "yes" ]; then
- NFS_SERVER="10.0.2.2"
- fi
-fi
-
-if [ "$FSTYPE" = "nfs" ]; then
- NFS_DIR=`echo $ROOTFS | sed 's/^[^:]*:\(.*\)/\1/'`
- if [ "$NFS_INSTANCE" = "" ] ; then
- NFS_INSTANCE=0
- fi
- MOUNTD_RPCPORT=$[ 21111 + $NFS_INSTANCE ]
- NFSD_RPCPORT=$[ 11111 + $NFS_INSTANCE ]
- NFSD_PORT=$[ 3049 + 2 * $NFS_INSTANCE ]
- MOUNTD_PORT=$[ 3048 + 2 * $NFS_INSTANCE ]
- UNFS_OPTS="nfsvers=3,port=$NFSD_PORT,mountprog=$MOUNTD_RPCPORT,nfsprog=$NFSD_RPCPORT,udp,mountport=$MOUNTD_PORT"
-
- PSEUDO_LOCALSTATEDIR=~/.runqemu-sdk/pseudo
- export PSEUDO_LOCALSTATEDIR
-
- # Start the userspace NFS server
- echo "runqemu-export-rootfs restart $ROOTFS"
- runqemu-export-rootfs restart $ROOTFS
- if [ $? != 0 ]; then
- return 1
- fi
- NFSRUNNING="true"
-fi
-
-
-set_mem_size() {
- if [ ! -z "$mem_set" ] ; then
- #Get memory setting size from user input
- mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
- else
- mem_size=$1
- fi
- # QEMU_MEMORY has 'M' appended to mem_size
- QEMU_MEMORY="$mem_size"M
-
-}
-
-config_qemuarm() {
- set_mem_size 128
- QEMU=qemu-system-arm
- MACHINE_SUBTYPE=versatilepb
- export QEMU_AUDIO_DRV="none"
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- KERNCMDLINE="root=$DROOT rw console=ttyAMA0,115200 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY highres=off"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M ${MACHINE_SUBTYPE} $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist"
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw console=ttyAMA0,115200 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M ${MACHINE_SUBTYPE} --no-reboot $QEMU_UI_OPTIONS"
- fi
- if [ "$MACHINE" = "qemuarmv6" ]; then
- QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
- fi
- if [ "$MACHINE" = "qemuarmv7" ]; then
- QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
- fi
-}
-
-config_qemuarm64() {
- set_mem_size 512
- QEMU=qemu-system-aarch64
-
- QEMU_NETWORK_CMD="-netdev tap,id=net0,ifname=$TAP,script=no,downscript=no -device virtio-net-device,netdev=net0 "
- DROOT="/dev/vda"
- ROOTFS_OPTIONS="-drive id=disk0,file=$ROOTFS,if=none,format=raw -device virtio-blk-device,drive=disk0"
-
- export QEMU_AUDIO_DRV="none"
- if [ "x$SERIALSTDIO" = "x" ] ; then
- QEMU_UI_OPTIONS="-nographic"
- else
- QEMU_UI_OPTIONS=""
- fi
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- KERNCMDLINE="root=$DROOT rw console=ttyAMA0,38400 mem=$QEMU_MEMORY highres=off $KERNEL_NETWORK_CMD"
- # qemu-system-aarch64 only support '-machine virt -cpu cortex-a57' for now
- QEMUOPTIONS="$QEMU_NETWORK_CMD -machine virt -cpu cortex-a57 $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist"
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw console=ttyAMA0,38400 mem=$QEMU_MEMORY highres=off $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -machine virt -cpu cortex-a57 $QEMU_UI_OPTIONS"
- fi
-}
-
-config_qemux86() {
- set_mem_size 256
- QEMU=qemu-system-i386
- if [ "$KVM_ACTIVE" = "yes" ]; then
- CPU_SUBTYPE=kvm32
- else
- CPU_SUBTYPE=qemu32
- fi
- if [ ! -z "$vga_option" ]; then
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
- else
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware"
- fi
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=$DROOT rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
- fi
- if [ "${FSTYPE:0:4}" = "cpio" ]; then
- KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=/dev/ram0 rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -initrd $ROOTFS $QEMU_UI_OPTIONS"
- fi
-
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist."
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
- fi
- if [ "$IS_VM" = "true" ]; then
- QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
- fi
- # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
- # qemux86 and qemux86-64. We can use timer interrupt mode for now.
- KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-}
-
-config_qemux86_64() {
- set_mem_size 256
- QEMU=qemu-system-x86_64
- if [ "$KVM_ACTIVE" = "yes" ]; then
- CPU_SUBTYPE=kvm64
- else
- CPU_SUBTYPE=core2duo
- fi
- if [ ! -z "$vga_option" ]; then
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
- else
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware"
- fi
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=$DROOT rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "x$ROOTFS" = "x" ]; then
- ROOTFS=/srv/nfs/qemux86-64
- fi
- if [ ! -d "$ROOTFS" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist."
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
- fi
- if [ "$IS_VM" = "true" ]; then
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
- fi
- # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
- # qemux86 and qemux86-64. We can use timer interrupt mode for now.
- KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-}
-
-config_qemumips() {
- set_mem_size 256
- case "$MACHINE" in
- qemumips) QEMU=qemu-system-mips ;;
- qemumipsel) QEMU=qemu-system-mipsel ;;
- qemumips64) QEMU=qemu-system-mips64 ;;
- esac
- MACHINE_SUBTYPE=malta
- QEMU_UI_OPTIONS="-vga cirrus $QEMU_UI_OPTIONS"
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- #KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- KERNCMDLINE="root=$DROOT rw console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist"
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
- fi
-}
-
-config_qemuppc() {
- set_mem_size 256
- QEMU=qemu-system-ppc
- MACHINE_SUBTYPE=mac99
- CPU_SUBTYPE=G4
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
- if [ "$SLIRP_ENABLED" = "yes" ]; then
- QEMU_NETWORK_CMD=""
- else
- QEMU_NETWORK_CMD="-net nic,model=pcnet $QEMU_TAP_CMD"
- fi
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- KERNCMDLINE="root=$DROOT rw console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist"
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
- fi
-}
-
-config_qemush4() {
- set_mem_size 1024
- QEMU=qemu-system-sh4
- MACHINE_SUBTYPE=r2d
- QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
- if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
- #KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- KERNCMDLINE="root=/dev/hda rw console=ttySC1 noiotrap earlyprintk=sh-sci.1 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS -monitor null -serial vc -serial stdio"
- SERIALSTDIO="1"
- fi
- if [ "$FSTYPE" = "nfs" ]; then
- if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
- echo "Error: NFS mount point $ROOTFS doesn't exist"
- cleanup
- return 1
- fi
- KERNCMDLINE="root=/dev/nfs console=ttySC1 noiotrap earlyprintk=sh-sci.1 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS -monitor null -serial vc -serial stdio"
- SERIALSTDIO="1"
- fi
-}
-
-config_qemuzynq() {
- set_mem_size 1024
- QEMU=qemu-system-arm
- QEMU_NETWORK_CMD="-net nic -net nic $QEMU_TAP_CMD"
- QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xilinx-zynq-a9 -serial null -serial mon:stdio -nographic -dtb $KERNEL-$MACHINE.dtb"
- # zynq serial ports are named 'ttyPS0' and 'ttyPS1', fixup the default values
- SCRIPT_KERNEL_OPT=$(echo "$SCRIPT_KERNEL_OPT" | sed 's/console=ttyS/console=ttyPS/g')
- if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
- KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
- fi
-}
-
-config_qemuzynqmp() {
- set_mem_size 2048
- QEMU=qemu-system-aarch64
-
- export QEMU_AUDIO_DRV="none"
- if [ "x$SERIALSTDIO" = "x" ] ; then
- QEMU_UI_OPTIONS="-nographic"
- else
- QEMU_UI_OPTIONS=""
- fi
-
- # Networking and system options required for QEMU ZynqMP machine
- QEMU_NETWORK_CMD="-net nic -net nic -net nic -net nic -net user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.10.70.101"
- QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xlnx-ep108 -serial mon:stdio -dtb $DEPLOY_DIR_IMAGE/${QEMU_DTB}.dtb"
-
- QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS $QEMU_UI_OPTIONS -initrd $ROOTFS"
-}
-
-config_qemumicroblaze() {
- set_mem_size 256
- QEMU=qemu-system-microblazeel
- QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M petalogix-ml605 -serial mon:stdio"
- if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
- KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
- QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
- fi
-}
-
-case "$MACHINE" in
- "qemuarm" | "qemuarmv6" | "qemuarmv7")
- config_qemuarm
- ;;
- "qemuarm64")
- config_qemuarm64
- ;;
- "qemux86")
- config_qemux86
- ;;
- "qemux86-64")
- config_qemux86_64
- ;;
- "qemumips" | "qemumipsel" | "qemumips64")
- config_qemumips
- ;;
- "qemuppc")
- config_qemuppc
- ;;
- "qemush4")
- config_qemush4
- ;;
- "qemuzynq")
- config_qemuzynq
- ;;
- "qemuzynqmp")
- config_qemuzynqmp
- ;;
- "qemumicroblaze")
- config_qemumicroblaze
- ;;
- *)
- echo "Error: Unsupported machine type $MACHINE"
- return 1
- ;;
-esac
-
-# We need to specify -m <mem_size> to overcome a bug in qemu 0.14.0
-# https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/584480
-if [ -z "$mem_set" ] ; then
- SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -m $mem_size"
-fi
-
-if [ "${FSTYPE:0:3}" = "ext" ]; then
- KERNCMDLINE="$KERNCMDLINE rootfstype=$FSTYPE"
-fi
-
-if [ "$FSTYPE" = "cpio.gz" ]; then
- QEMUOPTIONS="-initrd $ROOTFS -nographic"
- KERNCMDLINE="root=/dev/ram0 console=ttyS0 debugshell"
-fi
-
-if [ "$FSTYPE" = "iso" ]; then
- QEMUOPTIONS="$QEMU_NETWORK_CMD -cdrom $ROOTFS $QEMU_UI_OPTIONS"
-fi
-
-if [ "x$QEMUOPTIONS" = "x" ]; then
- echo "Error: Unable to support this combination of options"
- cleanup
- return 1
-fi
-
-if [ "$TCPSERIAL_PORTNUM" != "" ]; then
- if [ "$MACHINE" = "qemuarm64" ]; then
- SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -device virtio-serial-device -chardev socket,id=virtcon,port=$TCPSERIAL_PORTNUM,host=127.0.0.1 -device virtconsole,chardev=virtcon"
- else
- SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -serial tcp:127.0.0.1:$TCPSERIAL_PORTNUM"
- fi
-fi
-
-PATH=$OECORE_NATIVE_SYSROOT/usr/bin:$PATH
-
-QEMUBIN=`which $QEMU 2> /dev/null`
-if [ ! -x "$QEMUBIN" ]; then
- echo "Error: No QEMU binary '$QEMU' could be found."
- cleanup
- return 1
-fi
-
-NEED_GL=`ldd $QEMUBIN/$QEMU 2>&1 | grep libGLU`
-# We can't run without a libGL.so
-if [ "$NEED_GL" != "" ]; then
- libgl='no'
-
- [ -e /usr/lib/libGL.so -a -e /usr/lib/libGLU.so ] && libgl='yes'
- [ -e /usr/lib64/libGL.so -a -e /usr/lib64/libGLU.so ] && libgl='yes'
- [ -e /usr/lib/*-linux-gnu/libGL.so -a -e /usr/lib/*-linux-gnu/libGLU.so ] && libgl='yes'
-
- if [ "$libgl" != 'yes' ]; then
- echo "You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.
- Ubuntu package names are: libgl1-mesa-dev and libglu1-mesa-dev.
- Fedora package names are: mesa-libGL-devel mesa-libGLU-devel."
- return 1;
- fi
-fi
-
-do_quit() {
- cleanup
- return 1
-}
-
-trap do_quit INT TERM QUIT
-
-# qemu got segfault if linked with nVidia's libgl
-GL_LD_PRELOAD=$LD_PRELOAD
-
-if ldd $QEMUBIN | grep -i nvidia &> /dev/null
-then
-cat << EOM
-WARNING: nVidia proprietary OpenGL libraries detected.
-nVidia's OpenGL libraries are known to have compatibility issues with qemu,
-resulting in a segfault. Please uninstall these drivers or ensure the mesa libGL
-libraries precede nvidia's via LD_PRELOAD(Already do it on Ubuntu 10).
-EOM
-
-# Automatically use Ubuntu system's mesa libGL, other distro can add its own path
-if grep -i ubuntu /etc/lsb-release &> /dev/null
-then
- # precede nvidia's driver on Ubuntu 10
- UBUNTU_MAIN_VERSION=`cat /etc/lsb-release |grep DISTRIB_RELEASE |cut -d= -f 2| cut -d. -f 1`
- if [ "$UBUNTU_MAIN_VERSION" = "10" ];
- then
- GL_PATH=""
- if test -e /usr/lib/libGL.so
- then
- GL_PATH="/usr/lib/libGL.so"
- elif test -e /usr/lib/x86_64-linux-gnu/libGL.so
- then
- GL_PATH="/usr/lib/x86_64-linux-gnu/libGL.so"
- fi
-
- echo "Skip nVidia's libGL on Ubuntu 10!"
- GL_LD_PRELOAD="$GL_PATH $LD_PRELOAD"
- fi
-fi
-fi
-
-if [ "x$SERIALSTDIO" = "x1" ]; then
- echo "Interrupt character is '^]'"
- stty intr ^]
-fi
-
-
-# Preserve the multiplexing behavior for the monitor that would be there based
-# on whether nographic is used.
-if echo "$QEMUOPTIONS $SERIALOPTS $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT" | grep -- "-nographic"; then
- FIRST_SERIAL_OPT="-serial mon:stdio"
-else
- FIRST_SERIAL_OPT="-serial mon:vc"
-fi
-
-# qemuarm64 uses virtio for any additional serial ports so the normal mechanism
-# of using -serial will not work
-if [ "$MACHINE" = "qemuarm64" ]; then
- SECOND_SERIAL_OPT="-device virtio-serial-device -chardev null,id=virtcon -device virtconsole,chardev=virtcon"
-else
- SECOND_SERIAL_OPT="-serial null"
-fi
-
-# We always want a ttyS1. Since qemu by default adds a serial port when
-# nodefaults is not specified, it seems that all that would be needed is to
-# make sure a "-serial" is there. However, it appears that when "-serial" is
-# specified, it ignores the default serial port that is normally added.
-# So here we make sure to add two -serial if there are none. And only one
-# if there is one -serial already.
-NUM_SERIAL_OPTS=`echo $QEMUOPTIONS $SERIALOPTS $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT | sed -e 's/ /\n/g' | grep --count -- -serial`
-
-if [ "$NUM_SERIAL_OPTS" = "0" ]; then
- SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT $FIRST_SERIAL_OPT $SECOND_SERIAL_OPT"
-elif [ "$NUM_SERIAL_OPTS" = "1" ]; then
- SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT $SECOND_SERIAL_OPT"
-fi
-
-echo "Running $QEMU..."
-# -no-reboot is a mandatory option - see bug #100
-if [ "$IS_VM" = "true" ]; then
- # Check root=/dev/sdX or root=/dev/vdX
- [ ! -e "$VM" ] && error "VM image is not found!"
- if grep -q 'root=/dev/sd' $VM; then
- echo "Using scsi drive"
- VM_DRIVE="-drive if=none,id=hd,file=$VM -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd"
- elif grep -q 'root=/dev/hd' $VM; then
- echo "Using ide drive"
- VM_DRIVE="$VM"
- else
- echo "Using virtio block drive"
- VM_DRIVE="-drive if=virtio,file=$VM"
- fi
- QEMU_FIRE="$QEMUBIN $VM_DRIVE $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
- echo $QEMU_FIRE
- LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
-elif [ "$FSTYPE" = "iso" -o "$FSTYPE" = "wic" ]; then
- QEMU_FIRE="$QEMUBIN $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
- echo $QEMU_FIRE
- LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
-else
- QEMU_FIRE="$QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SLIRP_CMD $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
- echo $QEMU_FIRE -append '"'$KERNCMDLINE $SCRIPT_KERNEL_OPT'"'
- LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE -append "$KERNCMDLINE $SCRIPT_KERNEL_OPT"
-fi
-ret=$?
-if [ "$SLIRP_ENABLED" != "yes" ]; then
- cleanup
-fi
-
-#set the original stty values before exit
-stty ${ORIG_STTY}
-trap - INT TERM QUIT
-
-return $ret
--
2.9.0
More information about the Openembedded-core
mailing list