[OE-core] [PATCH RFC 1/1] kernel.bbclass: Add kernel_version_sanity_check function

Cal Sullivan california.l.sullivan at intel.com
Mon Aug 29 21:00:32 UTC 2016



On 08/25/2016 07:54 AM, Bruce Ashfield wrote:
>
>
> On Wed, Aug 17, 2016 at 1:25 AM, California Sullivan 
> <california.l.sullivan at intel.com 
> <mailto:california.l.sullivan at intel.com>> wrote:
>
>     The kernel being built should match what the recipe claims it is
>     building. This function ensures that happens for anyone using
>     LINUX_VERSION as they should. As it will likely break outside kernels
>     not using LINUX_VERSION, only enable the function for linux-yocto for
>     now.
>
>     Signed-off-by: California Sullivan
>     <california.l.sullivan at intel.com
>     <mailto:california.l.sullivan at intel.com>>
>     ---
>     I'm not absolutely sure this is the correct path to solve the issue.
>     This patch relies on LINUX_VERSION being set which isn't a guarantee.
>     There is probably a more general solution that I'm not thinking of.
>
>
> I can't say that I know of all the options either, but I can ask 
> questions and perhaps
> others will have more ideas.
>
>
>      meta/classes/kernel.bbclass               | 21 +++++++++++++++++++++
>      meta/recipes-kernel/linux/linux-yocto.inc |  1 +
>      2 files changed, 22 insertions(+)
>
>     diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
>     index db42744..ac2611f 100644
>     --- a/meta/classes/kernel.bbclass
>     +++ b/meta/classes/kernel.bbclass
>     @@ -330,6 +330,27 @@ kernel_do_install() {
>      }
>      do_install[prefuncs] += "package_get_auto_pr"
>
>     +# Must be ran some time after do_kernel_checkout or else Makefile
>     won't be in ${S}/Makefile
>     +do_kernel_version_sanity_check() {
>     +       # The Makefile determines the kernel version shown at runtime
>     +       # Don't use KERNEL_VERSION because the headers it grabs
>     the version from aren't generated until do_compile
>
>     +       VERSION=$(grep "^VERSION =" ${S}/Makefile | sed s/.*=\ //)
>     +       PATCHLEVEL=$(grep "^PATCHLEVEL =" ${S}/Makefile | sed
>     s/.*=\ //)
>     +       SUBLEVEL=$(grep "^SUBLEVEL =" ${S}/Makefile | sed s/.*=\ //)
>
>
> I was also trying to think of a way to avoid duplicating code that is 
> yanking out version
> numbers, but yes if we depend on utsrelease, we also have to do some 
> level of
> building .. but that can actually be pretty lightweight.
>
> Have you tried just invoking the prepare1 target in the kernel build ? 
> That should
> generate the utsrelease, and not much more.
I preferably didn't want to build anything. This is really just a check 
to make sure the recipe information keeps up with the kernel, so ideally 
we don't want to add much or any time to the builds. I'm also not 
familiar with the prepare1 process or the magic that goes into building 
the yocto kernel, so I'm not sure what all invoking prepare1 process 
would entail.

A simple solution would be to yank the version from the KERNEL_VERSION 
variable after compilation, but that would also mean you don't get the 
error until after you successfully build, which would be rather annoying.

>     +
>     +       # If SUBLEVEL is zero or doesn't exist we ignore it as
>     VERSION.PATCHLEVEL is normal
>     +       if [ -n "${SUBLEVEL}" ] && [ "${SUBLEVEL}" != "0" ]; then
>     +               if [ "${VERSION}.${PATCHLEVEL}.${SUBLEVEL}" !=
>     "${LINUX_VERSION}" ]; then
>     +                       bbfatal "LINUX_VERSION (${LINUX_VERSION})
>     does not match kernel being built
>     (${VERSION}.${PATCHLEVEL}.${SUBLEVEL}).\nTo fix this correct the
>     LINUX_VERSION variable in your kernel recipe."
>
>
> I know that I use LINUX_VERSION in the linux-yocto recipes, but it 
> isn't something
> enforced or widespread (as far as I know). Since this is 
> kernel.bbclass versus kernel-yocto.bbclass
> should this be checking against PV versus LINUX_VERSION ? 
> Alternatively, this could just
> move to kernel-yocto.bbclass as we try and make it more general.
>
> Bruce
>

PV is probably the better choice. I had some reasons I didn't want to 
use it before but I can't think of them now, and I can see some fairly 
simple ways to implement a sane matching. PV would also make it more 
widely applicable.

Thanks,
Cal

>     +               fi
>     +       else
>     +               if [ "${VERSION}.${PATCHLEVEL}" !=
>     "${LINUX_VERSION}" ]; then
>     +                       bbfatal "LINUX_VERSION (${LINUX_VERSION})
>     does not match kernel being built (${VERSION}.${PATCHLEVEL}).\nTo
>     fix this correct the LINUX_VERSION variable in your kernel recipe."
>     +               fi
>     +       fi
>     +       exit 0
>     +}
>     +
>      addtask shared_workdir after do_compile before
>     do_compile_kernelmodules
>      addtask shared_workdir_setscene
>
>     diff --git a/meta/recipes-kernel/linux/linux-yocto.inc
>     b/meta/recipes-kernel/linux/linux-yocto.inc
>     index 98a48ec..d979662 100644
>     --- a/meta/recipes-kernel/linux/linux-yocto.inc
>     +++ b/meta/recipes-kernel/linux/linux-yocto.inc
>     @@ -55,6 +55,7 @@ do_install_append(){
>      }
>
>      # extra tasks
>     +addtask kernel_version_sanity_check after do_kernel_checkout
>     before do_compile
>      addtask kernel_link_images after do_compile before do_install
>      addtask validate_branches before do_patch after do_kernel_checkout
>      addtask kernel_configcheck after do_configure before do_compile
>     --
>     2.5.5
>
>     --
>     _______________________________________________
>     Openembedded-core mailing list
>     Openembedded-core at lists.openembedded.org
>     <mailto:Openembedded-core at lists.openembedded.org>
>     http://lists.openembedded.org/mailman/listinfo/openembedded-core
>     <http://lists.openembedded.org/mailman/listinfo/openembedded-core>
>
>
>
>
> -- 
> "Thou shalt not follow the NULL pointer, for chaos and madness await 
> thee at its end"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20160829/a3b8f3ae/attachment-0002.html>


More information about the Openembedded-core mailing list